fix(llama-embed): size the batch for bge-m3's tokenizer, not Paperless's

The LLM index rebuild ran for 79 minutes and then died:

    input (1069 tokens) is too large to process.
    increase the physical batch size (current batch size: 1024)

Setting the batch to Paperless's chunk size looked like an exact match
and was not. Paperless counts its 1024 tokens with llama_index's
tokenizer; this server measures the batch in bge-m3's, which is
XLM-RoBERTa and splits German into more pieces. A chunk Paperless
considered full arrived here 4.4% over the limit, and the request failed
rather than truncating.

1536 absorbs a tokenizer ratio rather than a rounding error. 2048 stays
out of reach: that is where the chat model hit ErrorDeviceLost on this
Vulkan stack, under a 20 GB model's memory pressure that a 600 MB one may
well not reproduce — but there is no reason to go looking.

The index is left partial by the failed run and has to be rebuilt with
`document_llmindex rebuild` once this is live.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>

.woodpecker/deploy-netbird-proxy.yml

@@ -7,6 +7,8 @@ when:
       # install-netbird-proxy.yml also applies the netbird-proxy-watchdog role,
       # so changes to it must redeploy this host too.
       - "ansible/roles/netbird-proxy-watchdog/**"
+      # install-netbird-proxy.yml also applies the edge bouncer.
+      - "ansible/roles/crowdsec-edge-bouncer/**"
       - "ansible/plays/install-netbird-proxy.yml"
       - ".woodpecker/deploy-netbird-proxy.yml"
   - event: deployment

ansible/inventory/group_vars/netbird_proxy/vault.yml

@@ -0,0 +1,23 @@
+---
+# Bouncer key for crowdsec-edge-bouncer, scoped to the proxy hosts.
+#
+# A single encrypted VALUE rather than a whole-file vault like its siblings in
+# group_vars/all and group_vars/edge_host. Deliberate: adding this variable to
+# an existing whole-file vault means decrypting that file first, which exposes
+# every other secret in it for the sake of appending one line. encrypt_string
+# keeps the blast radius at this one value.
+#
+# Same value as OpenBao homelab/infrastructure/crowdsec-edge-bouncer-key, which
+# the crowdsec-edge-bouncer-key ExternalSecret feeds to BOUNCER_KEY_edge on the
+# LAPI. Both sides must move together — and unlike crowdsec-bouncer-key, this
+# one is NOT in the quarterly rotator, because nothing on these hosts re-reads
+# OpenBao on a schedule. Rotating it means updating OpenBao and re-running
+# plays/install-netbird-proxy.yml.
+vault_crowdsec_edge_bouncer_key: !vault |
+          $ANSIBLE_VAULT;1.1;AES256
+          32653764333536316163303838333839616562663862666637626165303837633866643033393239
+          3363376538656236643161386432326437633232643564630a633635306365323537346139626364
+          36613033343938363366306239363638383466396337623333623136313234656366333366623433
+          6437656632373364340a346566343866366433306533353431383064356362346536383136323663
+          39333864643534326433653233303137373162663066633132623931316135323733333863306330
+          6366623463666435636362376238313639666263323163303733

ansible/plays/install-netbird-proxy.yml

@@ -26,3 +26,7 @@
     - docker-install
     - netbird-proxy
     - netbird-proxy-watchdog
+    # Enforces the cluster's CrowdSec decisions here, where public traffic
+    # enters. Deployed in dry-run: it logs what it would block and creates no
+    # nftables rules until crowdsec_bouncer_mode is flipped per host.
+    - crowdsec-edge-bouncer

ansible/roles/crowdsec-edge-bouncer/defaults/main.yml

@@ -0,0 +1,47 @@
+---
+# CrowdSec firewall bouncer on the NetBird proxy hosts.
+#
+# Enforces the decisions the in-cluster CrowdSec already detects, at the point
+# where public traffic actually enters: these hosts terminate TLS for every
+# *.renner.uno name. A drop here never reaches the mesh, the relay or the
+# cluster.
+#
+# Detection stays in the cluster. The reverse-proxy produces no parseable
+# access log and there is no CrowdSec collection for it, while Traefik has a
+# working one — and every scenario in use needs HTTP detail (paths, status
+# codes, user agents) that does not exist at this layer.
+
+# Pinned. A release tarball URL is immutable, and this checksum is of the
+# amd64 asset for exactly this tag.
+crowdsec_bouncer_version: v0.0.36
+crowdsec_bouncer_sha256: f86e4b72693549d99f40a9402abefb894108f047a3fbe6e72fada25ee17ce88b
+
+# The LAPI over the public path these hosts already serve, see
+# kubernetes/infrastructure/crowdsec/lapi-ingress.yaml. The proxies cannot
+# reach it over the mesh: the reverse-proxy container runs non-root, so its
+# embedded NetBird client terminates the tunnel in userspace and the tunnel
+# belongs to that process rather than to the host netns.
+#
+# No ca_cert_path: Traefik serves a Let's Encrypt certificate for this name,
+# and the bouncer adds ca_cert_path to the system pool rather than replacing
+# it — the system pool already trusts LE.
+crowdsec_bouncer_api_url: https://crowdsec.renner.uno/
+crowdsec_bouncer_api_key: "{{ vault_crowdsec_edge_bouncer_key }}"
+
+# STARTS INERT, and that is the point.
+#
+# dry-run pulls decisions and logs what it would block without creating a
+# single nftables rule. The first bouncer to arm anywhere enforces ~24k CAPI
+# decisions at once on the only external entry path, so the false-positive
+# window has to come before the enforcement, not after it. Flip to `nftables`
+# one host at a time once the log looks right.
+crowdsec_bouncer_mode: dry-run
+
+crowdsec_bouncer_update_frequency: 10s
+crowdsec_bouncer_log_level: info
+
+# Bound to loopback deliberately. These hosts are public and have no metrics
+# collection path at all today — opening :60601 to the internet to gain a
+# scrape target is the wrong trade. Revisit when host metrics exist.
+crowdsec_bouncer_metrics_listen: 127.0.0.1
+crowdsec_bouncer_metrics_port: 60601

ansible/roles/crowdsec-edge-bouncer/handlers/main.yml

@@ -0,0 +1,10 @@
+---
+# A restart drops both nftables tables and rebuilds them from the next
+# successful LAPI pull, so there is a short window with no blocklist. That is
+# the documented behaviour of a clean shutdown, not a defect — and it is why
+# retry_initial_connect matters.
+- name: Restart crowdsec firewall bouncer
+  ansible.builtin.systemd:
+    name: crowdsec-firewall-bouncer.service
+    state: restarted
+    daemon_reload: true

ansible/roles/crowdsec-edge-bouncer/tasks/main.yml

@@ -0,0 +1,111 @@
+---
+# See defaults/main.yml for why this exists and why it starts inert.
+#
+# The static release tarball, not a distribution package: the AUR package
+# `crowdsec-firewall-bouncer-nftables` depends on `crowdsec` and would pull the
+# whole Security Engine onto hosts that only need the bouncer, the group is
+# mixed (proxy-1 Arch, VPS-1 Debian), and the AUR would be a new pattern this
+# repo does not otherwise have. The tarball is the same artefact the AUR
+# package downloads.
+
+- name: Ensure nftables is present (the enforcing backend)
+  ansible.builtin.package:
+    name: nftables
+    state: present
+
+- name: Ensure the bouncer config directory exists
+  ansible.builtin.file:
+    path: /etc/crowdsec/bouncers
+    state: directory
+    mode: "0755"
+
+# Fetched on the CONTROLLER and pushed, not pulled by the host.
+#
+# proxy-1 is IPv6-only, and neither github.com nor objects.githubusercontent.com
+# publishes an AAAA record — a get_url on the host fails with "Network is
+# unreachable" and no amount of retrying fixes it. Mirroring into
+# gitea.renner.uno is no help either: its public records are the internal LB
+# VIP (10.2.99.86 / fd99::86), so it is unreachable from outside the LAN. And
+# upstream ships no container image for this bouncer, which is expected —
+# it manipulates host netfilter.
+#
+# The CI runner has v4, so it does the fetching. The checksum is verified
+# there, before anything is copied to a host.
+- name: Fetch the pinned bouncer release on the controller
+  ansible.builtin.get_url:
+    url: >-
+      https://github.com/crowdsecurity/cs-firewall-bouncer/releases/download/{{
+      crowdsec_bouncer_version }}/crowdsec-firewall-bouncer-linux-amd64.tgz
+    dest: /tmp/crowdsec-firewall-bouncer-{{ crowdsec_bouncer_version }}.tgz
+    checksum: sha256:{{ crowdsec_bouncer_sha256 }}
+    mode: "0644"
+  delegate_to: localhost
+  become: false
+  run_once: true
+
+# Only the download had to move to the controller — the extraction stays on
+# the host. The ci-ansible image ships a tar that ansible rejects ("detected as
+# tar type None. GNU tar required"), while both host distributions have GNU
+# tar. Shipping the archive rather than the unpacked binary also keeps the
+# artefact that the checksum was verified against intact all the way to the
+# host.
+- name: Copy the bouncer archive to the host
+  ansible.builtin.copy:
+    src: /tmp/crowdsec-firewall-bouncer-{{ crowdsec_bouncer_version }}.tgz
+    dest: /opt/crowdsec-firewall-bouncer-{{ crowdsec_bouncer_version }}.tgz
+    mode: "0644"
+
+# Only the binary. The tarball also carries install.sh / upgrade.sh /
+# uninstall.sh, which manage systemd and config themselves — that is this
+# role's job, and letting them run would leave two owners for the same files.
+- name: Unpack the bouncer binary
+  ansible.builtin.unarchive:
+    src: /opt/crowdsec-firewall-bouncer-{{ crowdsec_bouncer_version }}.tgz
+    dest: /opt
+    remote_src: true
+    include:
+      - crowdsec-firewall-bouncer-{{ crowdsec_bouncer_version }}/crowdsec-firewall-bouncer
+    creates: /opt/crowdsec-firewall-bouncer-{{ crowdsec_bouncer_version }}/crowdsec-firewall-bouncer
+
+- name: Install the bouncer binary
+  ansible.builtin.copy:
+    src: /opt/crowdsec-firewall-bouncer-{{ crowdsec_bouncer_version }}/crowdsec-firewall-bouncer
+    dest: /usr/local/bin/crowdsec-firewall-bouncer
+    remote_src: true
+    mode: "0755"
+  notify: Restart crowdsec firewall bouncer
+
+# 0600: this file carries the LAPI key.
+- name: Deploy the bouncer configuration
+  ansible.builtin.template:
+    src: crowdsec-firewall-bouncer.yaml.j2
+    dest: /etc/crowdsec/bouncers/crowdsec-firewall-bouncer.yaml
+    mode: "0600"
+  notify: Restart crowdsec firewall bouncer
+
+- name: Deploy the bouncer systemd unit
+  ansible.builtin.template:
+    src: crowdsec-firewall-bouncer.service.j2
+    dest: /etc/systemd/system/crowdsec-firewall-bouncer.service
+    mode: "0644"
+  notify: Restart crowdsec firewall bouncer
+
+- name: Enable and start the bouncer
+  ansible.builtin.systemd:
+    name: crowdsec-firewall-bouncer.service
+    enabled: true
+    state: started
+    daemon_reload: true
+
+- name: Report how to read it
+  ansible.builtin.debug:
+    msg: |
+      crowdsec-firewall-bouncer deployed in mode "{{ crowdsec_bouncer_mode }}".
+
+      What it would block:  journalctl -u crowdsec-firewall-bouncer -f
+      What it does block:   nft list table ip crowdsec ; nft list table ip6 crowdsec6
+      Metrics:              curl -s {{ crowdsec_bouncer_metrics_listen }}:{{ crowdsec_bouncer_metrics_port }}/metrics
+
+      Rollback: systemctl stop crowdsec-firewall-bouncer. A clean stop deletes
+      both nftables tables by itself. Only after a kill -9 do they need
+      removing by hand: nft delete table ip crowdsec ; nft delete table ip6 crowdsec6

ansible/roles/crowdsec-edge-bouncer/templates/crowdsec-firewall-bouncer.service.j2

@@ -0,0 +1,24 @@
+# Managed by Ansible (crowdsec-edge-bouncer role) — do not edit.
+#
+# Upstream's shipped unit orders itself After=crowdsec.service. There is no
+# local Security Engine on these hosts — the LAPI is in the cluster — so that
+# dependency is dropped; nss-lookup instead, because api_url is a public name
+# that has to resolve before the first connect.
+[Unit]
+Description=CrowdSec firewall bouncer (edge enforcement for the NetBird proxy)
+After=network-online.target nss-lookup.target
+Wants=network-online.target
+
+[Service]
+Type=notify
+# -t validates the config and exits non-zero on a bad one, so a broken config
+# fails the start instead of taking the running rules down with it.
+ExecStartPre=/usr/local/bin/crowdsec-firewall-bouncer -c /etc/crowdsec/bouncers/crowdsec-firewall-bouncer.yaml -t
+ExecStart=/usr/local/bin/crowdsec-firewall-bouncer -c /etc/crowdsec/bouncers/crowdsec-firewall-bouncer.yaml
+Restart=always
+RestartSec=10
+LimitNOFILE=65536
+KillMode=mixed
+
+[Install]
+WantedBy=multi-user.target

ansible/roles/crowdsec-edge-bouncer/templates/crowdsec-firewall-bouncer.yaml.j2

@@ -0,0 +1,55 @@
+# Managed by Ansible (crowdsec-edge-bouncer role) — do not edit.
+mode: {{ crowdsec_bouncer_mode }}
+update_frequency: {{ crowdsec_bouncer_update_frequency }}
+
+# stdout, so journald owns the log and there is no second rotation policy to
+# keep in sync. The shipped example writes to /var/log; that only matters for
+# hosts without journald.
+log_mode: stdout
+log_level: {{ crowdsec_bouncer_log_level }}
+
+api_url: {{ crowdsec_bouncer_api_url }}
+api_key: {{ crowdsec_bouncer_api_key }}
+
+# Without this the process EXITS when the LAPI is unreachable at startup —
+# there is no retry on the first connect. And because a clean shutdown deletes
+# the nftables tables, the systemd restart loop would leave the host with no
+# blocklist at all until the first successful connect. Present in the code,
+# absent from the shipped example config.
+retry_initial_connect: true
+
+disable_ipv4: false
+disable_ipv6: false
+deny_action: DROP
+
+supported_decisions_types:
+  - ban
+
+# Separate tables per family; the bouncer never touches an existing table or
+# chain, and never sets a chain policy. Priority -10 puts it ahead of anything
+# at the default filter priority.
+nftables:
+  ipv4:
+    enabled: true
+    set-only: false
+    table: crowdsec
+    chain: crowdsec-chain
+    priority: -10
+  ipv6:
+    enabled: true
+    set-only: false
+    table: crowdsec6
+    chain: crowdsec6-chain
+    priority: -10
+
+# input is the traffic this exists for: the reverse-proxy is host-networked and
+# owns :443, so its packets traverse INPUT. forward covers the bridge-networked
+# http-redirect sidecar, whose packets never do.
+nftables_hooks:
+  - input
+  - forward
+
+prometheus:
+  enabled: true
+  listen_addr: {{ crowdsec_bouncer_metrics_listen }}
+  listen_port: {{ crowdsec_bouncer_metrics_port }}

kubernetes/apps/llama-server/embed.yaml

@@ -41,7 +41,7 @@ spec:
           image: ghcr.io/ggml-org/llama.cpp:server-vulkan-b10731
           args:
             - --hf-repo
-            - Qwen/Qwen3-Embedding-0.6B-GGUF:Q8_0
+            - gpustack/bge-m3-GGUF:Q8_0
             # Serves POST /v1/embeddings.
             - --embeddings
             # A short, stable id for consumers. Without it the model is
@@ -50,28 +50,41 @@ spec:
             # One name only: llama-server keeps aliases in a sorted set and
             # reports the first as the id, so a second name can steal it.
             - --alias
-            - qwen3-embedding-0.6b
-            # Qwen3-Embedding is trained for last-token pooling. Left
-            # unspecified llama-server takes the GGUF's default, which is not
-            # visible from outside and would silently produce vectors the model
-            # was not trained to emit. Set before anything is indexed: changing
-            # pooling later invalidates every stored embedding.
+            - bge-m3
+            # bge-m3 is trained for CLS pooling — a different type from the
+            # Qwen family this replaces, which uses last-token. Left unspecified
+            # llama-server takes the GGUF default, which is not visible from
+            # outside and would silently produce vectors the model was not
+            # trained to emit. Read from the model's own 1_Pooling/config.json
+            # rather than assumed; of the candidates measured, three different
+            # pooling types were needed.
             - --pooling
-            - last
+            - cls
             - --n-gpu-layers
             - "99"
             - --threads
             - "2"
-            # Paperless chunks documents at 1024 tokens. The defaults are
-            # batch 2048 / ubatch 512, and with --embeddings llama-server
-            # clamps both down to 512 rather than run them mismatched — below
-            # the chunk size. Matching both to 1024 fits a whole chunk in one
-            # pass; 2048 is deliberately avoided, since that is where this
-            # Vulkan stack fails with ErrorDeviceLost.
+            # Paperless chunks at 1024 tokens, but counts them with its own
+            # tokenizer while this server measures the batch in bge-m3's.
+            # Those disagree: XLM-RoBERTa splits German into more pieces than
+            # llama_index's counter does, so a chunk Paperless considers full
+            # at 1024 arrived here as 1069 and the request failed outright —
+            # "input (1069 tokens) is too large to process".
+            #
+            # The headroom therefore has to absorb a tokenizer ratio, not just
+            # a rounding error, and 1.5x covers far more than the 1.044 that
+            # broke it. The defaults are batch 2048 / ubatch 512, and with
+            # --embeddings llama-server clamps both to the smaller rather than
+            # run them mismatched, so both are set.
+            #
+            # 2048 stays avoided: that is where the chat model met
+            # ErrorDeviceLost on this Vulkan stack. That failure came under a
+            # 20 GB model's memory pressure and may not bind a 600 MB one, but
+            # this does not need to find out.
             - --batch-size
-            - "1024"
+            - "1536"
             - --ubatch-size
-            - "1024"
+            - "1536"
             # Room for a full chunk plus overhead rather than exactly one.
             - --ctx-size
             - "4096"
@@ -91,6 +104,14 @@ spec:
             capabilities:
               drop:
                 - ALL
+          # Measured, not estimated: embedding 400 real documents peaked at
+          # 1.6 GiB (Prometheus max_over_time on the working set). The limit is
+          # well above that because the footprint is dominated by the four slots
+          # at 4096 context and the Vulkan working set rather than by the
+          # weights — the Qwen model this replaces peaked at 10.6 GiB on the
+          # same settings for the same 600 MiB of weights, and several
+          # candidates were OOMKilled at limits that looked generous against
+          # their model size.
           resources:
             requests:
               cpu: 250m
@@ -98,7 +119,7 @@ spec:
               gpu.intel.com/i915: "1"
             limits:
               cpu: "2"
-              memory: 4Gi
+              memory: 8Gi
               gpu.intel.com/i915: "1"
           # ~600 MiB rather than ~5 GiB, so a much shorter budget than the chat
           # model needs, but still sized for a cold download.

kubernetes/apps/paperless/paperless.yaml

@@ -82,7 +82,10 @@ data:
   # primarily English archives — the better fit for a German corpus.
   PAPERLESS_AI_LLM_EMBEDDING_BACKEND: "openai-like"
   PAPERLESS_AI_LLM_EMBEDDING_ENDPOINT: "http://llama-embed.ai.svc.cluster.local:8080/v1"
-  PAPERLESS_AI_LLM_EMBEDDING_MODEL: "qwen3-embedding-0.6b"
+  # Must match --alias in kubernetes/apps/llama-server/embed.yaml. Changing the
+  # embedding model invalidates every stored vector, so a swap means the LLM
+  # index has to be rebuilt.
+  PAPERLESS_AI_LLM_EMBEDDING_MODEL: "bge-m3"
   PAPERLESS_AI_LLM_EMBEDDING_CHUNK_SIZE: "1024"
 ---
 apiVersion: apps/v1

kubernetes/infrastructure/crowdsec/edge-bouncer-key-externalsecret.yaml

@@ -0,0 +1,27 @@
+# Bouncer key for the firewall bouncers on proxy-1/proxy-2.
+#
+# Separate from crowdsec-bouncer-key ON PURPOSE. That key is rotated
+# quarterly by kubernetes/infrastructure/openbao/rotation/crowdsec-bouncer-key.yaml,
+# and both of its consumers live in the cluster, so ESO propagates a rotation
+# within 10m. The edge bouncers are Ansible-managed hosts: nothing there
+# re-reads OpenBao on a schedule, so a rotated key would leave them 401ing
+# against the LAPI until someone runs the playbook. This key is therefore
+# deliberately NOT enrolled in the rotator — it rotates when the playbook runs,
+# and the playbook is what carries the new value to the hosts.
+#
+# The value must match ansible vault_crowdsec_edge_bouncer_key.
+apiVersion: external-secrets.io/v1
+kind: ExternalSecret
+metadata:
+  name: crowdsec-edge-bouncer-key
+  namespace: crowdsec
+spec:
+  refreshInterval: 10m
+  secretStoreRef:
+    kind: ClusterSecretStore
+    name: openbao
+  target:
+    name: crowdsec-edge-bouncer-key
+  dataFrom:
+    - extract:
+        key: infrastructure/crowdsec-edge-bouncer-key

kubernetes/infrastructure/crowdsec/helmrelease.yaml

@@ -36,6 +36,36 @@ spec:
   values:
     container_runtime: containerd
 
+    # Addresses a community blocklist must never be allowed to ban.
+    #
+    # This is the ONLY declarative allowlist the chart offers. `cscli
+    # allowlists` objects live in the LAPI database, and that database runs
+    # without persistence here on purpose (see lapi.persistentVolume below),
+    # so anything created through cscli is gone at the next restart. This file
+    # is a ConfigMap mount, so it survives by construction. Upstream marks it
+    # deprecated in favour of centralized allowlists; it is still the only
+    # thing that works against a LAPI with no PVC.
+    #
+    # Scope: CAPI decisions only. Locally generated decisions are not filtered
+    # here — they currently carry real client IPs (verified), because Traefik
+    # resolves X-Forwarded-For past the netbird-ingress pod IP.
+    #
+    # The home WAN address is deliberately absent and is not needed: LAN
+    # clients never present it. opentofu/unifi_nat_hairpin.tf DNATs the public
+    # proxy addresses to the Traefik VIP on the UDM, so on-LAN traffic reaches
+    # the cluster directly with a LAN source and never traverses the proxies.
+    # Private ranges cannot appear in a community blocklist either way.
+    config:
+      capi_whitelists.yaml: |
+        cidrs:
+          # The proxy hosts themselves. Same three addresses as the
+          # netbird-ingress-egress toCIDRSet and the hairpin endpoints —
+          # keep all three lists in sync. proxy-1 is the v6-only member,
+          # proxy-2 the dual-stack one.
+          - 45.157.177.26/32
+          - 2a03:4000:4b:c1e:4474:43ff:fedf:8f85/128
+          - 2a03:4000:28:f6e:a4c7:59ff:fe1e:9a29/128
+
     # mTLS between agents and the LAPI. Do not switch back to password auth:
     # the LAPI runs without persistence, so its machine-registration DB is
     # wiped on every restart, and password-registered agents then get 401
@@ -86,10 +116,18 @@ spec:
         requests:
           cpu: 50m
       podAnnotations:
-        # Reloader restarts the LAPI when crowdsec-bouncer-key changes (it's an
-        # env-var secret, so a restart is required to pick up a rotated key). See
+        # Reloader restarts the LAPI when either bouncer key changes. Both are
+        # consumed as env vars from a secretKeyRef, and env is fixed at pod
+        # start — without a restart the LAPI keeps trusting the old value while
+        # the bouncer already presents the new one, which is a 401 at exactly
+        # the moment a rotation is supposed to be seamless.
+        #
+        # crowdsec-bouncer-key rotates on a schedule, see
         # kubernetes/infrastructure/openbao/rotation/crowdsec-bouncer-key.yaml.
-        secret.reloader.stakater.com/reload: crowdsec-bouncer-key
+        # crowdsec-edge-bouncer-key rotates by hand together with
+        # ansible/plays/install-netbird-proxy.yml; it still needs to be listed
+        # here, because the LAPI side of that rotation is this env var.
+        secret.reloader.stakater.com/reload: crowdsec-bouncer-key,crowdsec-edge-bouncer-key
       persistentVolume:
         data:
           # Kept OFF deliberately. The #337 attempt to set this `true` (persist
@@ -118,6 +156,17 @@ spec:
             secretKeyRef:
               name: crowdsec-bouncer-key
               key: key
+        # The firewall bouncers on proxy-1/proxy-2, over the public LAPI
+        # endpoint (lapi-ingress.yaml). The chart's entrypoint re-runs
+        # `register_bouncer` for every BOUNCER_KEY_* on each start and skips
+        # names that already exist, so this survives the LAPI's wiped
+        # registration DB the same way BOUNCER_KEY_ingress does — the env var
+        # is the source of truth, not the database.
+        - name: BOUNCER_KEY_edge
+          valueFrom:
+            secretKeyRef:
+              name: crowdsec-edge-bouncer-key
+              key: key
 
     agent:
       # Same reasoning as lapi.resources above, multiplied by three: this is a

kubernetes/infrastructure/crowdsec/kustomization.yaml

@@ -2,4 +2,6 @@ apiVersion: kustomize.config.k8s.io/v1beta1
 kind: Kustomization
 resources:
   - bouncer-key-externalsecret.yaml
+  - edge-bouncer-key-externalsecret.yaml
+  - lapi-ingress.yaml
   - helmrelease.yaml

kubernetes/infrastructure/crowdsec/lapi-ingress.yaml

@@ -0,0 +1,81 @@
+# Public LAPI endpoint for the firewall bouncers on proxy-1/proxy-2.
+#
+# WHY PUBLIC AT ALL. The bouncers run as host processes on the proxies, and
+# the proxies have no mesh access: the netbird-proxy container runs non-root
+# (see the ip_unprivileged_port_start task in the netbird-proxy role), so it
+# has no NET_ADMIN and no /dev/net/tun, and its embedded NetBird client
+# therefore terminates the tunnel in userspace. The tunnel belongs to that
+# process, not to the host netns — a second process on the same host cannot
+# route through it. The alternative was a host-level NetBird client plus the
+# LAPI on a LoadBalancer VIP; this reuses the path every other service already
+# takes instead of adding two peers and an ACL policy.
+#
+# NO IP ALLOWLIST, deliberately. The bouncer key is the access control.
+#
+# An allowlist was the obvious second factor and it does not work here. A
+# request originating on a proxy host does not arrive carrying that host's
+# public address: the client connects to the local proxy on 127.0.0.1, the
+# reverse-proxy puts what it saw into X-Forwarded-For, and Traefik resolves
+# that. Measured against the netbird-proxy-watchdog, which makes exactly this
+# kind of request every round:
+#
+#   172.18.0.3 - - [02/Sep/2026:10:12:01] "GET /" 200 websecure-immich-...
+#   172.18.0.3 - - [02/Sep/2026:10:12:01] "GET /" 200 websecure-home-...
+#
+# 172.18.0.3 is a Docker bridge address on the proxy side. Allowlisting the
+# published proxy addresses would have rejected the bouncer with 403;
+# allowlisting 172.18.0.0/16 would be a private range on a host we do not
+# control the addressing of, which is not a security control.
+#
+# What remains is the API key, which is the real control anyway: this endpoint
+# serves read-only decision streams to a valid bouncer key and nothing else.
+# The admin surface is cscli, in-cluster. If the source address ever becomes
+# deterministic, an ipAllowList can be added on top.
+---
+# The LAPI serves HTTPS only once tls.enabled is set — there is no plaintext
+# fallback and no second port; 8080 is the TLS port. Its certificate comes
+# from the chart's own self-signed CA, so Traefik needs that CA to verify the
+# backend. SANs include crowdsec-service.crowdsec.svc.cluster.local, which is
+# what the Service resolves to.
+apiVersion: traefik.io/v1alpha1
+kind: ServersTransport
+metadata:
+  name: crowdsec-lapi
+  namespace: crowdsec
+spec:
+  serverName: crowdsec-service.crowdsec.svc.cluster.local
+  rootCAsSecrets:
+    - crowdsec-root-secret
+---
+apiVersion: networking.k8s.io/v1
+kind: Ingress
+metadata:
+  name: crowdsec-lapi
+  namespace: crowdsec
+  labels:
+    # Public DNS via Cloudflare; the proxies resolve it from outside. The UDM
+    # external-dns instance skips it, LAN reaches it via the hairpin NAT.
+    dns.renner.uno/public: "true"
+  annotations:
+    cert-manager.io/cluster-issuer: letsencrypt-cluster
+    # NOT behind the Authentik gate: the client is a daemon with an API key,
+    # not a browser that can complete an OIDC flow.
+    traefik.ingress.kubernetes.io/service.serversscheme: https
+    traefik.ingress.kubernetes.io/service.serverstransport: crowdsec-crowdsec-lapi@kubernetescrd
+spec:
+  ingressClassName: traefik
+  rules:
+    - host: crowdsec.renner.uno
+      http:
+        paths:
+          - path: /
+            pathType: Prefix
+            backend:
+              service:
+                name: crowdsec-service
+                port:
+                  number: 8080
+  tls:
+    - secretName: crowdsec-lapi-public-tls
+      hosts:
+        - crowdsec.renner.uno