Cilium reads datapath options once, at agent start, and the chart puts no
config checksum on the pod template. A changed ConfigMap therefore leaves every
agent running the previous datapath until something restarts it, and nothing
does — the DaemonSet is not rolled by a ConfigMap-only Helm change.
This already cost an outage. vlan-bpf-bypass landed in cilium-config and every
v30iot macvlan workload stayed broken until the agents were deleted by hand,
one node at a time (issue #592). The merge looked successful: HelmRelease
Ready, release upgraded, key present in the ConfigMap, and nothing working.
policyMapMax carries the same exposure. Its comment says "takes effect on agent
restart", which is documentation standing in for automation — as does the
equivalent note in the two bootstrap copies.
Reloader is already deployed and used across the repo for the same purpose.
Named per-ConfigMap rather than blanket, matching the existing convention.
The trade, stated plainly: any cilium-config change now rolls the CNI
cluster-wide, node by node. That is the same disruption a datapath change
already required; the difference is that it happens on its own rather than
being forgotten.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Every v30iot macvlan workload on a bare-metal node has been stuck in sandbox
creation since its node was converted. Cilium's datapath drops VLAN-tagged
frames unless bpf.vlanBypass lists the tag, and cilium-config carried no
vlan-bpf-bypass key at all.
Inside the Proxmox guests ens19 was an untagged virtio NIC on the v30iot
bridge, so nothing was tagged by the time Cilium saw it. On bare metal ens19 is
a VLAN 30 sub-interface of enp2s0f0np0, and the macvlan children's DHCP
exchange never reaches the wire.
Measured rather than inferred: cilium_drop_count_total on the affected node
reports ~123k INGRESS and ~1.1k EGRESS drops with reason "VLAN traffic
disallowed by VLAN filter", against none on the node that was still a VM, and
node_network_receive_packets_total for ens19 reads 0 there against 10 pkt/s on
the VM. Full analysis in issue #592.
The symptom hides its own cause. A tc-layer drop surfaces to an AF_PACKET
sender as ENOBUFS, so the CNI dhcp plugin reports "no buffer space available"
and "network is down" instead of a DHCP timeout.
VLAN 40 is deliberately not listed. mgmt0 rides the same parent and carries the
node IP, etcd and the API, and it passes today without a bypass entry, so
adding it would change a working control-plane datapath to fix an IoT one.
All three copies of the key move together — the HelmRelease, kubernetes/talos/
cilium.yaml, and the inline bootstrap manifest in patches/cilium-cni.yaml — so
a cold rebuild does not come up without it.
The runbook predicted this exact failure and is updated to record that it
happened, along with how to recognise it from the drop counters rather than the
misleading CNI error. music-assistant's comment claiming ens19 is "the v30iot
NIC" on every node is corrected; it is a NIC on the edge worker and a VLAN
sub-interface on the control-plane nodes.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
These two sat at size 2 because of #434, not because of the conversion. With
three Crucial P3 QLC OSDs on three hosts, size 3 put every write on every
drive, so per-drive write volume equalled cluster write volume and all three
wore at an identical rate — 80/82/87% of rated endurance, projected to exhaust
together between Nov 2026 and Jan 2027. Replication is no defence against that,
because the wear was correlated by construction.
The OSDs are Samsung PM983 enterprise drives now, at 2-3% of rated endurance
with a far higher write budget. Wear-out is no longer the binding constraint
and the correlation argument no longer applies, so the pools return to the
durability the cluster is sized for.
The min_size 1 overrides go with them. They existed only because Ceph does not
lower min_size when size is reduced, which would have left the pools 2/2 and
blocked IO on any single OSD going down.
cephfs-metadata's comment loses the clause explaining that data0 sits at 2,
which stops being true here.
cephfs-ci stays at size 2: that pool holds throwaway CI workspaces and is at 2
rather than 1 only because an unreplicated pool makes `ceph osd ok-to-stop`
refuse for every OSD. Unrelated to #434.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
All three nodes are converted and the cluster is back to three OSDs across
three zones with 217 PGs active+clean, so the conversion window that justified
2/1 on this pool is over.
The min_size override goes with it. It existed only because Ceph does not
lower min_size when size is reduced, so the pool would have been 2/2 while a
host was out. At size 3 the default min_size of 2 is what the pool wants.
The comment loses its TEMPORARY banner and now states the standing rationale
and the condition under which the pool degrades to two copies.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
neptune is converted and back in the cluster, so k8s-3 returns to the storage
fleet on its new PM983. All three nodes now name their OSD by /dev/disk/by-id,
and the storage fleet is whole again.
The comment generalises to all three nodes and records neptune's serials.
k8s-3 is the clearest evidence for by-id addressing: it enumerated the Kingston
as nvme0n1 on one boot and the Crucial as nvme0n1 on the very next one, so a
kernel-name reference had no stable meaning on that machine at all.
The old osd.1 lived on the Crucial that is now EPHEMERAL. That drive was wiped
during the conversion, so the OSD is unrecoverable and is purged from the CRUSH
map separately; this change only creates its replacement.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
neptune now runs Talos directly, so k8s-3 moves from the VM-era layout to the
multi-document form k8s-1 and k8s-2 already use. The old config selected
interfaces by busPath against virtio NICs and installed to /dev/vda; neither
exists on bare metal.
Disks are selected by serial rather than kernel name. That is not defensive
styling: Talos enumerated this machine's drives differently than Proxmox did,
and differently again between two consecutive boots — nvme0n1 was the Kingston
on one boot and the Crucial on the next. A device-name reference would have
installed onto the wrong drive.
nvme 50026B7382B48B90 Kingston system disk
nvme 2326E6E8E67D Crucial EPHEMERAL, 83% of rated endurance
nvme S437NF0M501176 PM983 OSD, 3% used
Serials, interface names and drive health were read from the machine itself —
the Kingston and Crucial off the running Proxmox host before the wipe, and
confirmed again from Talos maintenance mode.
k8s-2.yaml loses the sentence claiming k8s-3 is still a Proxmox VM. No Proxmox
remains in the homelab.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
neptune is the last node to convert to bare metal, and its OSD drive is swapped
in the same window. Removing k8s-3 from the explicit node list first means Rook
stops managing that OSD before the drive it lives on goes away, rather than
recreating it mid-reconcile and backfilling onto a disk that is about to be
pulled.
The device comment for k8s-3 goes with it: it described the PCI-passed-through
drive that node saw as a Proxmox guest, which stops being true here.
Ceph runs on two OSDs and size-3 pools stay degraded until the node rejoins.
cephfs-metadata is already at 2/1 for exactly this window.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
saturn is back on bare metal with the PM983 in place, so k8s-2 returns to the
storage fleet. Like k8s-1 it names the device by /dev/disk/by-id: the machine
has three NVMe drives and Talos enumerates them differently than Proxmox did,
so nvme0n1 there is the Kingston system disk.
The runbook prescribed applying the full per-node config in maintenance mode,
which hangs the install. A document referencing an interface that does not
exist yet leaves the node at STAGE: Installing with KUBELET n/a, the console
repeating
k8s.NodeApplyController: error getting node: nodes "k8s-N" not found
which reads as a Kubernetes fault but is an install that never completed. On
saturn it was the ens19 VLAN document and the sysctl naming it. Three cold
installs hung; the identical config applied cleanly to the running node.
Wiping disks changes nothing.
Install now runs in two stages: a minimal network config plus EPHEMERAL, which
is one-shot and cannot be deferred, then the full config applied to the running
node behind --mode=try so a bad network config reverts itself.
Also corrects the claim that maintenance mode cannot be inspected. talosctl get
works there; --insecure is a subcommand flag and has to follow `get`, otherwise
cobra resolves the legacy `talosctl disks` command and rejects the flag.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
VM 605 is pinned to saturn, so it cannot survive the conversion, and it has to
go before the node leaves the Proxmox cluster — afterwards the provider cannot
reach it and every plan errors.
Nothing uses it. Its purpose was cloning new Proxmox VMs, Proxmox is being
retired, and the one remaining VM definition sets template_name = null
explicitly rather than cloning from it.
The module default is changed to null for the same reason: it named a template
that no longer exists, which would only surface as an apply-time failure for
whoever created the next VM.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
saturn is being converted to bare metal, so its VM definition goes and it
leaves the list of Proxmox nodes the pipeline seeds the nocloud image onto.
The apply must run while saturn is still a Proxmox cluster member. Once it
leaves, the provider cannot reach the node, the plan errors, and the only way
out is tofu state rm.
module.k8s_2 is referenced nowhere else in opentofu/, so this destroys exactly
one resource.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Structurally identical to k8s-1.yaml; only serials, MACs and addresses differ.
Written from saturn's live hardware rather than assumed: the X710 port 1 MAC
came from the guest that currently owns it, since the host cannot see a
passed-through NIC.
Kingston 50026B7382DA5F6E system disk
Crucial 2332E86B74BC EPHEMERAL, retiring from osd.0 at 81% wear
X710 p0 58:47:ca:76:6f:73 trunk, VLAN 40 + VLAN 30
X710 p1 58:47:ca:76:6f:74 Ceph cluster network, 10.99.0.2/29
Links are addressed by kernel name rather than LinkAliasConfig, and both disks
by serial. Talos and Proxmox do not agree on NVMe enumeration order, and a
network document that fails to resolve takes the whole machine's DHCP with it.
Not applied by anything on merge — talos patches are applied by hand. Landing
it before the conversion so the file under review is the file that gets
installed.
Verified with talosctl validate --mode metal against v1.12.6.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Removing the node from storage.nodes before purging its OSD is what makes the
purge stick. Under useAllNodes the operator rebuilt a purged OSD within one
reconcile and began backfilling onto the drive being replaced; listing nodes
explicitly exists so a node can be taken out first.
Re-add after the conversion naming the device by /dev/disk/by-id, as k8s-1
does. A bare device name is not safe on bare metal: Talos enumerates the three
NVMe drives in a different order than Proxmox, and nvme0n1 is the system disk.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
pvecm expected 1 is the official recovery, documented verbatim in the storage
replication chapter of the Proxmox admin guide. Its caveat is about restoring
the missing node instead; here the missing node is deliberately gone for good,
so enforcing quorum is the correct branch rather than a workaround.
Also records that it must be run only once the node is alone -- corosync
rejects a value below the members it can see, which is why the attempt on the
current two-node cluster returned CS_ERR_INVALID_PARAM -- and that it is
runtime only.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
jupiter is converted and its OSD rebuilt, so the capacity constraint that took
immich down is gone with all three nodes back.
cephfs-metadata deliberately stays at size 2 / min_size 1. It has to be
degraded again for saturn and then neptune, and each transition re-replicates
the pool, so toggling it per node buys nothing but churn. Its comment said to
restore it once k8s-1 was back, which is now misleading about the plan; it
restores after the last conversion instead.
The immich comments lose their jupiter-specific framing — taking both
Deployments down is a pre-flight step for any single-node maintenance now, and
the runbook carries it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Written from doing jupiter, with saturn and neptune still to go. The conversion
itself was straightforward; every failure came from state that outlived the VM,
so the runbook is weighted towards those rather than towards the happy path.
The three that cost real time:
A rebuilt node gets a new MAC and a new lease, and Ceph keeps its mon pinned to
the old address in the monmap, the mon-endpoints ConfigMap and the deployment's
--public-addr. The mon then cannot bind, the operator's next step wants to
restart a healthy mon, Ceph refuses because that would drop quorum, and it
retries every minute forever without reaching the storage reconcile. Fixing the
ConfigMap before the monmap and the deployment matters, or the operator
recreates the mon from the stale entry.
Talos stops running default DHCP for the whole machine as soon as one new-style
network document exists, and a LinkAliasConfig selector that matches nothing is
skipped silently. Together those turn a small config mistake into a node with no
address on any interface.
EPHEMERAL placement is honoured only on first provision, so it has to be right
in the first apply-config; afterwards it is ignored and relocating needs a wipe.
Also records the Proxmox quorum step that starts mattering at the second
conversion, the Secure Boot blocker, and that Talos and Proxmox enumerate the
same three NVMe drives in different orders — which is why the OSD is named by
by-id path rather than device name.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
jupiter is back as a bare-metal Talos node, so its OSD returns to the storage
fleet on the new drive.
The device is named by /dev/disk/by-id rather than by bare device name, because
the bare name would be wrong here. Talos enumerates this machine's three NVMe
drives in a different order than Proxmox did, and nvme0n1 on k8s-1 is the
Kingston system disk:
nvme0n1 50026B7382B48B86 Kingston Talos system disk
nvme1n1 2332E86B749A Crucial Talos EPHEMERAL (/var)
nvme2n1 S437NX0M400426 PM983 this OSD
Rook would most likely have declined the system disk for carrying partitions,
but relying on that is luck rather than intent. The by-id path derives from
model and serial and does not depend on enumeration order.
k8s-2 and k8s-3 keep bare names: each guest sees exactly one block device,
the drive passed through from its host, so there is nothing to disambiguate.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The first install of this node came up with no address on any interface and had
to be recovered from the console. This is the configuration that replaced it,
now running on jupiter.
The alias layer was the cause, but not for the reason it first appeared. Reading
the v1.12.6 source: aliases ARE supported as VLAN parents — link_config.go
resolves parent links through the alias map, and the field's own doc comment
says so. The structure was fine. What is not fine is the failure behaviour.
LinkAliasConfigController skips a selector that matches zero links with no log
of any kind, contradicting the doc comment on the type which claims an error is
returned. And permanent_addr comes from the ETHTOOL_GPERMADDR ioctl with no
fallback to the current address, so a driver that does not answer it yields an
empty string, an unmatched glob, and silence.
That alone would have been survivable. What made it total is that Talos stops
running default DHCP operators for the WHOLE machine as soon as a single
new-style link, VLAN or DHCP document exists — the gate is presence of a
document, not success of resolution. So the silent miss removed the only
configured path while the safety net was already disabled. There is no fail-open
option.
Aliases are worth having and should come back. The condition is that they are
verified rather than assumed: apply with `--mode=try`, which rolls back on its
own, and check that linkaliasspec exists and that permanentAddr is actually
populated before trusting it. A LinkConfig on the real kernel name alongside the
alias resolves regardless of whether the alias landed, and costs nothing.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Three NVMe drives are present, not two: the Crucial stays in the machine as
EPHEMERAL rather than being pulled.
The second I226 is enp90s0, not enp89s0. Adding that third drive renumbered
the PCI buses and renamed it, which is a concrete demonstration of why every
NIC in this file is matched by permanent MAC rather than by name or bus path.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The Crucial P3 that was this node's Ceph OSD stays in the machine rather than
being pulled, and takes over /var. At 87% of rated endurance it is finished as
an OSD, but everything EPHEMERAL holds — containerd images and snapshots, pod
logs, the Ceph mon store — is reconstructible, so the drive is consumable in
that role.
It also removes the constraint that keeps biting elsewhere: /var becomes
~931 GB instead of the 64 GB the VM-era zvol gave it. k8s-3 tripped
DiskPressure twice today the moment it absorbed another node's pods, with
image GC already at its floor and ~20 GB of unreclaimable overlayfs snapshots.
This node will not have that problem, and the same treatment is available to
saturn and neptune when they convert.
Talos only honours volume configuration when the volume does not yet exist, so
this must ship in the first apply-config; applied later it is silently ignored
and relocating EPHEMERAL then needs a disk wipe and a boot from install media.
The selector matches an exact serial. There are three NVMe drives in this
machine now and `disk.transport == 'nvme' && !system_disk` would match the
PM983 as well, which would hand Talos the OSD drive.
Verified with talosctl validate --mode metal against v1.12.6.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
With one of three nodes out for the bare-metal conversion, the remaining pair
cannot hold the workload: cluster CPU requests exceed two nodes' capacity by
roughly 200m once DaemonSets and unplaceable Ceph pods are discounted, and
k8s-3 sits ~5.8 GiB above the kubelet's eviction threshold with image GC
already at its floor.
immich is the right thing to stop rather than squeeze. machine-learning
reserves 500m against a 2m idle draw, but inference bursts hard, so cutting
its request would misrepresent what it needs the moment someone uploads
photos. Stopping it removes the reservation honestly, and takes its pods and
image pulls off k8s-3 for the duration.
The Postgres cluster stays up, so recovery is these two replica counts and
nothing else.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
useAllNodes makes it impossible to retire an OSD ahead of pulling its drive.
Purging osd.2 and deleting its deployment held for one reconcile: the operator
saw a node it was told to use, carrying a device with a BlueStore signature,
and rebuilt the OSD. Ceph then began backfilling onto the very drive being
replaced.
Listing nodes explicitly makes membership of the storage fleet a property of
this file rather than of which nodes happen to exist, so a node can be removed
before its disk is touched.
k8s-1 is out while jupiter's OSD is swapped for the PM983 and the node is
converted to bare metal. The cluster runs on two OSDs until it is re-added;
all pools are size 2 / min_size 1 and stay fully redundant across the pair.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Draining k8s-1 for the jupiter conversion left three pods unschedulable:
k8s-2 and k8s-3 both sat at 100% of requested CPU while actually using 21-23%.
Cluster-wide the gap is 19,680m requested against 7,957m used.
crowdsec is the clearest single contributor. The chart defaults reserve 500m
for each agent and for the LAPI; measured draw is 1-2m. As a DaemonSet the
agent alone parks half a core on every node. Nothing here had ever set
resources, so this was an inherited default rather than a decision.
Only the request changes. Limits stay at the chart default, so a log flood can
still burst to 500m; what shrinks is the reservation the scheduler subtracts
from every node whether or not the process uses it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
jupiter's Crucial P3 Plus OSD is at 87% endurance used, and reaching the
MS-01's only U.2-capable slot means moving the boot drive anyway. Doing the
bare-metal conversion in the same window avoids opening the machine twice and
throws away no work: the osd-ssd PCI mapping that a Proxmox-side swap would
need to be re-pointed at ceases to exist.
Networking uses the v1.12 multi-document config rather than the deprecated
machine.network.interfaces. The docs do not define what happens when one link
is configured by both schemas, so k8s-1 keeps every link in one of them. This
also buys VLANConfig.name, which is free-form: naming the VLAN 30 link ens19
keeps the four v30iot macvlan NADs working unchanged across VM and bare-metal
nodes, so the cluster can stay mixed without pinning those workloads.
Physical NICs are matched by permanent MAC, not driver — both X710 ports bind
i40e here, unlike the single passed-through port k8s-2/k8s-3 see.
cephfs-metadata drops to size 2 / min_size 1 for the duration. At size 3 on
two remaining hosts every PG sits undersized with min_size 2, so one further
OSD loss would block IO on every CephFS mount cluster-wide. This must go back
to size 3 once k8s-1 rejoins.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The sweep restores every discovered Velero schedule, immich's ~180 GiB
library included. At size 2 that is ~360 GiB raw, ~120 GiB per OSD, and
measured on 2026-08-25 it was ~350 of the ~740 GB each drive wrote per
week — ~47% of the endurance budget, against a ~65 GB/day weekday
baseline.
That baseline is itself the result of the 2026-08-18..21 write-reduction
work (#518, #519, #520, CNPG checkpoint tuning, RAM-backed emptyDirs,
paperless data to RBD, CI workspaces to cephfs-ci), which cut per-drive
writes ~70% from ~195 GB/day. With the application tier down, the restore
test is now the single largest consumer of remaining QLC endurance; the
three OSD drives are at 81/82/87% used.
Monthly still exercises every restore path and cuts the sweep's share of
drive wear ~4x, moving per-drive weekly writes from ~740 GB to ~530 GB.
Cadence-only change:
- 0 8 * * 0 -> 0 8 1 * *, keeping the 08:00 UTC slot that clears the
03:15-07:15 daily backup window (see the comment in the manifest).
- ttlSecondsAfterFinished 14 d -> 40 d, so the previous run is still
inspectable when the next one fires.
- Comments and docs that state the cadence updated to match, including
the BLUESTORE_SLOW_OP_ALERT runbook text, which tells the reader to
check whether a stall fell inside the restore-test window.
No day-of-week form is available: Kubernetes parses cron with
robfig/cron's standard parser, whose day-of-week field allows only
`* / , - ?` (no Quartz `#` nth-weekday), and restricting both day fields
ORs them.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The Wetterstation now carries a non-default reporting configuration: min
interval 5s on all ten reportable attributes, and tighter reportable-change
deadbands on temperature, humidity and pressure. None of it is expressible
in configuration.yaml - Zigbee2MQTT has no settings-schema field for
reporting configuration - so it lives only on the device and in Z2M's
database.db. This documents it and how to restore it.
min was 10s against an 8.8s transmit interval. Since min is a hold-off, every
change-triggered report was held past a transmit cycle and landed on the
next, so attributes reported at best every 17.6s and drifted out of phase.
The published stream showed no 8.8s periodicity at all. At min 5 each
attribute reports on its own transmit and the stream carries one publish per
cycle, measured at a mean gap of 8.69s. Publish volume fell from ~631/h to
~445/h because each publish is now a whole cycle rather than a fragment.
The deadbands come from the shared modernExtend helpers, which the WS90
definition composes without overrides. They are anti-chatter values sized for
battery-powered indoor sensors. Temperature was 1.00 C, giving a staircase
that moved about twice an hour; it is now 0.1 C, matching the resolution the
device actually reports. Pressure was 5 kPa - 50 hPa, which real barometric
pressure never traverses, so it only ever updated on the hourly heartbeat
that pressure_trend and weather_condition derive from. Note the same library
configures the identical ZCL attribute with a 5 hPa deadband in its older
reporting.ts helper, so the two code paths disagree by 10x.
Anything that makes Z2M re-run configure on the device reverts all of it, and
a fresh PVC will not have it. The restore commands are written out literally
rather than generated by a shell helper, because the nested quoting through
`kubectl exec -- sh -c` is where this goes wrong; each was executed and
verified as written, including the read-back, and re-applying is a no-op.
No behaviour change from this commit itself - the device was reconfigured at
runtime, this only records it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
#560 claimed a merged episode "surfaces as a single all-zero frame". It
does not, and the difference decides whether a downstream filter is even
possible.
The zeros propagate attribute by attribute through the burst, so the
merged frame carries whatever subset had zeroed when that burst ended.
Across three episodes captured at nanosecond resolution the propagation
happened to complete, which is where the wrong generalisation came from.
Nothing guarantees it. A burst ending mid-propagation publishes a frame
with temperature at zero while humidity and pressure still read normally,
which is a physically consistent measurement - Z2M recomputes dew_point
from the false temperature - and is not separable from a genuine winter
reading.
The zeros also begin inside an otherwise normal transmit cycle, roughly
20ms after a valid reading in the same burst (measured: 27.7ms, 19.8ms,
22.0ms). They occupy a regular reporting slot, so no timing property
distinguishes them either.
Since the merge is last-wins and the zeros arrive at the tail of the
burst, it resolves that burst to the zeros and discards the valid reading
that led it. So debounce trades six bad samples per episode for one, at
the cost of one good sample. That is a bound on the corruption, not a
filter, and the comment now says so.
No behaviour change; the debounce value and device stanza are untouched.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The value is unchanged and correct; the comment committed alongside it in
#559 was neither accurate nor the right place for most of what it said.
Accuracy. It cited the device's ZCL reporting configuration as the bound,
reading minRepIntval 10 as "the station updates every 10s". minRepIntval
is not a cadence: with maxRepIntval 3600 and a reportable change set, the
ZCL reporting model gives periodic reports at the MAXIMUM interval — once
an hour — plus change-driven reports each held back so it lands no sooner
than 10s after the previous. It is a hold-off on change-triggered reports
and says nothing about the gap between reports of different attributes,
which is what a debounce window sees.
The bound that applies is the documented transmit interval — readings
every 2s, transmitted every 8.8s — against Z2M's documented rule not to
set debounce above the sensor's update interval. Shelly's knowledge base
rounds the same figure to 9s.
It also claimed the window had to exceed 1s because "the recovery burst
straddles a second boundary", inferred from log lines stamped 11:42:11
and 11:42:12. Those are second-resolution timestamps and cannot
distinguish 10ms from 900ms. No lower bound was ever established.
Length. The rest was commit-message material sitting in a config file:
justification for the chosen value, gap-distribution and run-length
measurements, and notes reconciling my own earlier misreadings. Comments
state facts about the system, not the history of arriving at them. What
remains is what the device does, what debounce does to it, and the
constraint on the value — 41 lines down to 13.
Verified before writing: post-debounce frames arrive complete (all 22
fields, no partials) at a settled ~10s cadence.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Two changes to the Wetterstation (Ecowitt WS90, 0xc02cedfffe958f40), both
aimed at the station's recurring zero-drop glitch.
2.13.0 carries zigbee-herdsman-converters#12748, which discards the ZCL
non-value markers (0xffff / 0xff / 0xffffff) the WS90 emits when a reading
is unavailable. Without it those markers are scaled and published as
measurements — the 6553 m/s gust readings in Koenkk/zigbee2mqtt#31048. The
release also recovers the rain rate after a counter reset, which is the
same lifetime-counter dip that packages/wetterstation.yaml compensates for
on the Home Assistant side. Its only breaking change is dropping Node.js 20
for bare-metal installs; the container ships its own runtime. The amd64
manifest was verified pullable before this commit.
debounce: 2 addresses the part 2.13.0 does not fix. Koenkk/zigbee2mqtt#31048
is still open, and the author of #12748 states explicitly that it does not
cover the zero drops: "a zero can be a real reading for these attributes,
only the all-bits-set markers are provably invalid."
The station reports as a burst of seven per-cluster ZCL frames and Z2M
publishes its full cumulative state once per frame, so one device report
becomes seven MQTT messages. During a glitch the zeros appear progressively
across those seven, which is what makes the corruption unrecognisable
downstream: an intermediate frame carrying {"temperature":0,"humidity":92,
"pressure":96.9} is internally consistent (Z2M recomputes dew_point from the
false temperature) and cannot be told apart from a legitimate winter
reading. Merging the burst yields a single frame with the all-zero
signature, which a consumer can reject.
The window is bounded on both sides. Above: the device's own reporting
configuration sets minRepIntval 10 / maxRepIntval 3600 on all seven WS90
clusters (1024/1026/1027/1029 and 0xfc01/0xfc02/0xfc03), so no attribute
repeats inside 10s. Below: the recovery burst straddles a second boundary,
so 1s splits it and emits a partial frame.
Staggering was checked rather than assumed — the 10s floor is per attribute,
and nine attributes report across those clusters, so a trailing-edge timer
could in principle keep resetting and never flush. Over 6h the longest
unbroken chain of sub-2s gaps was 5, bounding worst-case deferral under
~10s.
The device is also absent from the seeded device list, which predates it
joining, so this adds the friendly_name too.
NOTE: this file is seed-only. A running Z2M owns its configuration.yaml on
the PVC, so this does not change the live instance — it only makes a fresh
PVC come up correctly. debounce is requiresRestart, so applying it live
needs the option set on the running instance and a restart; the image bump
supplies the restart.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
From the #426 audit. Tag verified present before bumping.
The kaniko bump that was originally in this branch is dropped. It would
have pinned a new `-debug` image, and debug variants are not to run in
the production cluster. kaniko is archived upstream, so the fix is
migration rather than a version bump; tracked in #552 along with the
`-debug` requirement.
Comments should say what the setting does and what constrains it. The
blocks added in #542, #544, #545 and #547 had grown into incident
write-ups: measurement runs, prior values, how a problem was found,
what a check used to be. That belongs in commit messages and the wiki,
both of which already carry it.
Trimmed, no behaviour change:
cephcluster.yaml 22 lines -> 6 (cephx rotation)
cephfs-ci.yaml 26 lines -> 7 (why size 2)
prometheusrule-ceph.yaml (CephHealthWarn, 43 -> 13;
CephPoolLostRedundancy, 15 -> 7)
The operative facts are kept: which checks are excluded and why they
cannot clear, that POOL_NO_REDUNDANCY reports blocked maintenance and
not only data risk, and that size 1 needs dedicated OSDs.
The unreplicated CI pools introduced in #542 make every OSD on the
cluster permanently un-restartable.
`ceph osd ok-to-stop` refuses while stopping an OSD would take PGs
offline. A size-1 pool puts every PG on exactly one OSD, so the check
fails for all three:
Error EBUSY: unsafe to stop osd(s) at this time
(20 PGs are or would become offline)
bad_become_inactive: 13.6 13.9 ... 14.1c 14.1d
Pools 13 and 14 are cephfs-ci-metadata and cephfs-ci-data0. The size-2
pools are not implicated — they run min_size 1 and appear under
ok_become_degraded, which is allowed.
Rook gates OSD restarts on that check, so this blocks CephX key
rotation, Ceph upgrades, node drains and reboots, and drive
replacement. It surfaced when #545 deadlocked: Rook retried
ok-to-stop against all three OSDs several times a second and could
never succeed, while `ceph -s` reported 217 pgs active+clean
throughout. Nothing is unhealthy; the restarts are simply refused.
The reasoning in #542 was that unreplicated CI data only risks
in-flight pipelines, since every byte is a fresh git clone. That part
holds. What it missed is that the cost is not scoped to the pool: one
unreplicated pool freezes maintenance for the entire cluster.
Most of #542's saving came from keeping CI churn off `cephfs`, whose
metadataPool is size 3 — that survives this change. Only the second-
order gain from dropping the replica is given up, and cephfs-ci-data0
stores 0 B with cephfs-ci-metadata at 182 MiB, so the backfill is
trivial.
size 1 becomes viable again once these pools sit on OSDs of their own,
where the permanently un-stoppable OSD holds nothing but throwaway
data. That is planned with the retired QLC drives.
Alerting follows the same change:
- POOL_NO_REDUNDANCY is no longer excluded from CephHealthWarn. It was
excluded because cephfs-ci was expected to keep it permanently
active; no pool is unreplicated now, so the exclusion would only
hide a real one losing its replicas.
- CephPoolLostRedundancy drops its cephfs-ci exemption for the same
reason, and its description now states the maintenance consequence,
not just the data-loss one.
- The AUTH_INSECURE_* exclusion is reworded. Calling it
"known-accepted" reads as a decision that the risk is fine; it is a
kernel-blocked remediation (aes256k over the CSI mount path needs
kernel 7.0+, nodes run 6.18).
Refs #542, #545, #527
Ceph v19.2.6 ships the fix for CVE-2025-30156, a CephX authentication
bypass: AES-128-CBC service tickets carry no HMAC and use a hard-coded
IV, so a holder of any low-privilege key can bit-flip a ticket into
cluster-admin in linear time. Upgrading the binaries does not resolve
it — the keys themselves must be rotated to the aes256k cipher.
The cluster is mid-procedure. auth_allowed_ciphers (aes, aes256k),
auth_preferred_cipher (aes256k) and auth_service_cipher (aes256k) are
already set, and the rotating service keys were wiped, but no actual
key rotation has happened: every entity in status.cephx is still
keyGeneration 1 with keyType aes, created under 19.2.3.
Rook automates daemon-key rotation but it is opt-in and defaults to
Disabled, so spec.security.cephx was left empty and nothing rotated.
Rook v1.20.6 and Ceph v19.2.6 are both past the version floor the
feature requires.
Rotating daemon keys clears AUTH_INSECURE_SERVICE_KEY_TYPE, the only
one of the six new checks at ERR severity. That is the operationally
urgent part: Rook skips CephFS and RGW reconciliation entirely while
health is HEALTH_ERR — which is what deadlocked the mds/rgw rollout in
issue #527 — and the check is presently held down only by a mon-side
mute with a finite TTL. When that mute lapses the cluster returns to
HEALTH_ERR and the reconcile freeze comes back.
CSI keys are deliberately left on aes. aes256k over the CSI mount path
requires a host kernel of 7.0 or newer and these nodes run 6.18, so
`aes` must stay in auth_allowed_ciphers for CSI to authenticate at all.
AUTH_INSECURE_CLIENT_KEY_TYPE, AUTH_INSECURE_KEYS_ALLOWED and
AUTH_INSECURE_KEYS_CREATABLE therefore stay raised at WARN until the
nodes run a kernel that supports it.
Rotation restarts most Ceph daemons. With size 2 pools across 3 OSDs
this should be applied deliberately rather than alongside other churn,
and Ceph should reach HEALTH_OK before anything else touches the
cluster.
Refs #527, #528
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
CephHealthWarn alerted on `ceph_health_status == 1`. It has been FIRING since
at least 2026-08-21T00:26Z and cannot clear: four AUTH_INSECURE_* checks are
permanently active from CVE-2025-30156 (#527) and stay that way until Rook
>=1.20.5 lands. A permanently-firing alert reports nothing -- every Ceph
warning since then has been invisible behind it.
This is a pre-existing gap, not a consequence of the cephfs-ci work, though
that work would have added a second permanent cause (POOL_NO_REDUNDANCY, since
the CI pools are size 1 on purpose).
ceph_health_detail exposes each check as its own series, so the alert now fires
on any check that is NOT known-accepted, and names it. Verified against live
data: 5 checks active, 0 unexpected, so it is quiet now and fires the moment
something genuinely new appears.
Excluding POOL_NO_REDUNDANCY wholesale would give something up: that check is
cluster-wide and does not say WHICH pool, so accepting it for cephfs-ci would
equally hide a production pool dropping to one replica. CephPoolLostRedundancy
restores that. There is no pool-size metric, but bytes_used/stored IS the
replication factor -- verified live as replicapool 2, cephfs-data0 2,
cephfs-metadata 3, cephfs-ci-metadata 1.
Both alerts were tested against live data before committing, in BOTH
directions. The positive control matters as much as the negative one: an early
draft used a >1e9 floor which silently excluded the CI pools entirely, so the
expression could not have matched anything. It looked correct precisely because
it returned no results. The control caught it; the floor is now 1e6.
The floor is not what suppresses the near-empty rgw pools. Their ratios are
9-36 because per-object overhead dominates, so they never match `< 1.5`.
6h on CephHealthWarn is unchanged -- Ceph warns for self-clearing conditions
and paging on those trains people to ignore the alert.
Repoints WOODPECKER_BACKEND_K8S_STORAGE_CLASS at ceph-filesystem-ci, the
dedicated filesystem added in #542 whose pools are both size 1.
Measured 2026-08-21, polling both CephFS pools every 15s:
CI active 1.5 min (6 intervals): data0 143.2 MB metadata 17.2 MB
CI idle 16.0 min (63 intervals): data0 0.0 MB metadata 11.0 MB
CI share of writes: data0 100%, metadata 61%
data0 takes zero bytes across 16 minutes without a pipeline, so its entire
write volume is CI. The 15s cadence is what made this visible: a pipeline
creates, uses and deletes its PVC inside ~2 minutes, so a 5-minute sample
reported no CI pods during bursts CI was causing.
Per pipeline this moves the drive cost from 71.6x2 + 8.2x3 = ~168 MB to
~80 MB, since neither pool is replicated on the new filesystem.
RWX is unchanged and still required: pipeline steps share the workspace PVC
and the k8s backend can schedule them on different nodes, so an RWO volume
fails to mount on the second node. Only the filesystem underneath changes.
Also corrects the justification written into #542 for leaving
ceph-filesystem-ephemeral alone. That commit claimed restore-test.sh handles
"REAL data which must not land on unreplicated pools". That is wrong: its
probe PVCs are as throwaway as a CI workspace -- the authoritative copy is the
backup on Hetzner, and losing a probe just means re-running the test.
The actual reason it cannot move is technical: those probes are snapshot
CLONES, and `ceph fs subvolume snapshot clone` operates within a single
filesystem, so a snapshot taken in `cephfs` cannot be cloned into `cephfs-ci`.
Landing them unreplicated would require a second size-1 data pool inside
`cephfs`; restore-test runs weekly against CI's ~96 pipelines/day, so that is
not worth the complexity.
cephfs-ci verified healthy before this change: PHASE Ready, MDS Running, both
pools reporting size 1.
Woodpecker's Kubernetes backend creates a PVC per pipeline, fills it with a
checkout plus build output, and deletes it when the pipeline ends. Those
workspaces currently live on the shared `cephfs`, so throwaway data is
replicated as if it mattered: 2x in cephfs-data0 and 3x in cephfs-metadata.
Measured 2026-08-21 by polling both pools every 15s. The interval matters --
at 5 minutes a whole pipeline is invisible, because its PVC is created, used
and deleted inside ~2 minutes. Sampling that slowly reported zero CI pods
during bursts CI was causing, which sent this investigation down three wrong
paths before the cadence was fixed.
one pipeline, a single 15s interval: data0 +71.6 MB metadata +8.2 MB
every interval with no CI pod: data0 ~0 metadata ~0
So CI accounts for essentially all CephFS write volume; between pipelines the
metadata pool is quiet at ~4 MB/day. On the shared filesystem one pipeline
costs 71.6x2 + 8.2x3 = ~168 MB of drive writes. On this one it costs ~80 MB.
size 1 is correct here even though it was rejected for `cephfs`. There,
metadataPool stays at 3 because losing it destroys the entire filesystem
rather than the objects on one OSD, and 550 GiB of real data depends on it.
Here every byte is a fresh git clone: total loss means in-flight pipelines
fail and get re-run. Replicating throwaway data was the cost, so it is what
gets removed.
`ceph-filesystem-ephemeral` is deliberately NOT repointed. It has a second
consumer -- velero/restore-test.sh restores REAL data through it for
verification, which must not land on unreplicated pools. A new class also
sidesteps StorageClass.parameters being immutable.
Nothing uses ceph-filesystem-ci yet, so this commit is inert: it provisions
the filesystem and its MDS and changes no existing workload. Repointing the
Woodpecker agent is a separate change, once this is confirmed healthy.
Known consequence: size 1 raises POOL_NO_REDUNDANCY, so cluster health will
warn until that is addressed. Silencing it via mon_warn_on_pool_no_redundancy
is cluster-wide and would also hide a production pool dropping to 1, so it
wants a targeted alert instead -- deliberately left out of this commit rather
than switching the warning off blind.
The MDS is 512Mi/1Gi with no standby, not the 4Gi active+standby that `cephfs`
runs. That figure is driven by immich's cached inode count; a CI workspace is
a few thousand files that vanish with the pipeline, and a second daemon to
protect throwaway work is not worth its memory.
A WAL segment is a fixed 16 MiB file. archive_timeout forces a switch on a
timer, and the switched-out segment is written and archived at its full size
no matter how little real WAL it holds. CNPG defaults to 5min, permitting
288 segments/day per cluster of largely padding.
gf-pg went first as a staged rollout and is now verified: 211 -> 41 MB/hour,
an 81% cut, with archived segments falling from ~12/hour to ~1.5/hour in
step. Two independent signals moving together is what confirms the volume
was padding rather than data, and the measured result matched the ~35
MB/hour predicted beforehand.
Fleet-wide this is worth roughly 18 GB/day of logical writes, which at
size=2 with ~1.27x BlueStore overhead is ~45 GB/day at the drives -- about
14% of the 328 GB/day the three OSD NVMes currently take.
ak-pg gets 15min rather than 30min. It holds credentials, sessions and
enrolment state, and the extra 15min would save only a further 0.3 GB/day,
which does not justify doubling the worst-case loss window on that data.
ha-pg saves least in relative terms: its segments are already 63% full of
real WAL (4.9 GB/day), so the timer is not what drives most of its switches.
Also corrects two comments in ha-pg-cluster.yaml that this work falsified.
wal_compression: the claim that these clusters "were not getting compression"
was wrong -- "on" is pglz, which was already compressing. Switching to zstd
moved the WAL rate not at all (4911/4976 -> 5002 MB/day, by LSN advance over
20min windows). Full-page images genuinely are ~62% of WAL here (61.9%
measured as a steady-state delta, against 62.4% lifetime -- so the migration
did not skew it, which was my first guess and it was wrong). There was simply
no headroom between pglz and zstd on this data. zstd is kept because it is
not worse and costs nothing, but it is not a lever.
checkpoint_timeout: 15min -> 30min likewise did not move WAL. Probable reason
is that a recorder is append-mostly -- a page is dirtied while it fills and
then not touched again, so it pays its full-page image once whatever the
checkpoint interval. Kept, but flagged as unjustified pending a data-file
measurement: this volume takes ~11 GB/day against 4.9 GB/day of WAL, so most
of its traffic is outside what a WAL measurement can see.
Context: drive-endurance work on three QLC NVMe OSDs at 81-87% wear.
A WAL segment is a fixed 16 MiB file. archive_timeout forces a segment
switch on a timer so the archive never trails reality by more than that
interval, and the switched-out segment is written and archived at its full
16 MiB no matter how few bytes of real WAL it holds. CNPG defaults this to
5min, which permits up to 288 segments/day = 4.6 GB/day per cluster.
Measured on gf-pg: the database is 21 MB and generates 4.5 MB/day of actual
WAL, while its RBD volume takes 211 MB/hour -- against 192 MB/hour predicted
from 12 switches of 16 MiB. Essentially every byte written to this volume is
padding, roughly 1100x amplification.
This resolves an anomaly that has been open since the start of the endurance
work: gf-pg appeared to write gigabytes per day for a 21 MB database, and
neither WAL volume nor data changes could account for it. Segment padding
does, exactly.
Applied to gf-pg alone as a staged rollout. It is the lowest-risk cluster
and gives the cleanest signal -- its real WAL is small enough that any change
in volume is unambiguously attributable to this parameter. The same default
affects all seven clusters and is worth an estimated ~24 GB/day of logical
writes fleet-wide, but that only goes ahead once this one is verified.
The cost is RPO. On total loss of the cluster, up to 30min of Grafana state
becomes unrecoverable instead of 5min. That state is dashboards, annotations
and preferences, changing at ~4.5 MB/day, so the window is nearly always
empty. Clusters holding credentials or job state get evaluated separately
rather than inheriting this value by default.
archive_timeout is in CNPG's GlobalDefaultSettings, not its
FixedConfigurationParameters, so it is user-overridable -- verified against
pkg/postgres/configuration.go rather than assumed.
Context: drive-endurance work on three QLC NVMe OSDs at 81-87% wear.
`wal_compression: "on"` resolves to pglz, PostgreSQL's original 2016-era
algorithm. Every CNPG cluster here was set that way, so none of them were
getting the compression actually available to them: all seven builds accept
lz4 and zstd (verified via pg_settings.enumvals on each, including immich's
custom pgvector image and trmnl's PostgreSQL 18).
This matters because of what dominates recorder-style write volume. A page
is written to WAL in full -- all 8 KiB -- on its first modification after a
checkpoint, for torn-page protection. Measured on ha-pg, those full-page
images are 62.4% of WAL bytes. Compressing them is therefore the single
largest lever available on WAL volume, and pglz was the weakest option for
the job.
ha-pg additionally moves checkpoint_timeout 15min -> 30min. Full-page images
are emitted once per page per checkpoint interval, so doubling the interval
roughly halves how often each hot page pays the 8 KiB toll. max_wal_size
stays at 2GB deliberately: it must remain well above what one interval
generates, or checkpoints would trigger on size and the interval change
would do nothing. Recovery replays at most one interval of WAL -- under
200MB at the measured rate, i.e. seconds.
The other six clusters keep checkpoint_timeout at 15min. Their measured
write rates do not justify trading recovery time: gf-pg generates 4.5 MB/day
of WAL and wp-pg 62 MB/day, against ak-pg's 604 MB/day.
full_page_writes stays on everywhere. Disabling it would remove the
overhead entirely but RBD can tear a page across an object boundary, and
the trade is write volume against an unrecoverable database.
Both parameters are sighup-reloadable, so this does not restart any cluster.
Context: drive-endurance work on three QLC NVMe OSDs at 81-87% wear.
Prometheus held 298,236 active series. ~108,000 of them -- over a third -- were
apiserver/etcd `_bucket` histograms. Each fans out to one series per bucket x
verb x resource x scope, so a single metric was 23,810 series on its own. Every
Home Assistant metric combined is ~4,100 for comparison.
That cardinality is the dominant driver of Prometheus write volume (~11 GB/day of
TSDB + WAL, doubled again by Ceph replication) and none of it is observable value
on three nodes: per-bucket apiserver latency quantiles are for clusters with SLAs
and dozens of nodes.
Dropped, all verified to have ZERO rule dependencies by checking each metric
against the live alert and recording rules:
apiserver_request_duration_seconds_bucket rules=0 23,810 series
apiserver_request_body_size_bytes_bucket rules=0 23,200
etcd_request_duration_seconds_bucket rules=0 15,840
apiserver_watch_list_duration_seconds_bucket rules=0 11,538
apiserver_watch_cache_read_wait_seconds_bucket rules=0 8,232
apiserver_response_sizes_bucket rules=0 7,592
apiserver_watch_events_sizes_bucket rules=0 5,220
-------
95,432
KEPT deliberately: apiserver_request_sli_duration_seconds_bucket (12,144 series).
23 recording rules depend on it, including the apiserver availability SLO and the
KubeAPIErrorBudgetBurn burn-rate series. Dropping it would silently break that
alerting -- the manifest says so inline, so a later "tidy up" of the regex does
not remove it by accident.
Only `_bucket` series are dropped. The matching `_count` and `_sum` remain, so
request rates and mean latencies still work; what is lost is per-bucket
quantiles.
etcd_* is included even though kubeEtcd is disabled: those are the apiserver's
own etcd-client metrics on the apiserver endpoint, not a separate etcd scrape.
Expected: ~32% fewer active series, so roughly 11 -> 7 GB/day of Prometheus
writes, ~8 GB/day off the drives once replication is counted. Will verify against
prometheus_tsdb_head_series rather than assume.
Refs #434
Co-Authored-By: Claude Bot <noreply@anthropic.com>
An image reference is not a secret. Encoding it as base64 `data` had two real
costs: no reviewer sees a version change in a diff, and no $imagepolicy marker
can attach to a base64 blob.
The result was a two-minor version skew in the component that performs every
base backup and WAL archive for seven Postgres clusters (#535):
controller plugin-barman-cloud:v0.14.0 <- auto-bumped by Flux
sidecar plugin-barman-cloud-sidecar:v0.12.0 <- invisible, never moved
Not stale pods: ha-pg-1 was created hours ago during the recorder migration and
still received v0.12.0.
Three changes:
1. The Secret now uses stringData with the tag in plaintext, carrying an
$imagepolicy marker. The Secret KIND is kept because the controller reads it
via secretKeyRef; switching to a ConfigMap would need a matching edit to that
reference and diverge further from upstream. stringData is accepted
identically by the API server.
2. ImageRepository + ImagePolicy added for the sidecar image, with the same
filter and 0.x range as the controller, so the two cannot drift apart again.
Only the controller was tracked before.
3. Tag aligned to v0.14.0 to match the controller.
The Secret name carries a kustomize hash suffix from upstream's secretGenerator
but is static here, so editing the value does not change the name and the
deployment's secretKeyRef stays valid — verified in the render, which still shows
the name twice (Secret + reference).
Verified the tag EXISTS before pinning it: pulling
plugin-barman-cloud-sidecar:v0.14.0 succeeds (the pod fails later on a missing
`true` binary in that minimal image, which is the container command, not the
pull). Pinning a non-existent tag would have put all seven Postgres clusters into
ImagePullBackOff.
EXPECTED IMPACT: bumping the sidecar changes every Postgres pod spec, so all
seven CNPG clusters roll. CNPG handles this as a normal rolling restart. Backups
should be confirmed working afterwards — 113 Backup CRs exist today, newest ~3h
old and completed.
Note for future re-imports: upstream ships this Secret as base64 `data` with no
marker, so a wholesale re-import silently reintroduces the skew. The manifest now
says so inline.
Refs #535
Co-Authored-By: Claude Bot <noreply@anthropic.com>
Switches the Deployment's `data` volume from paperless-data (RWX,
ceph-filesystem) to paperless-data-block (RWO, ceph-block). `consume` and `media`
stay on CephFS -- the ftp-scanner writes to those from another node, so they
genuinely need RWX.
The copy is already done and verified byte-for-byte with paperless stopped:
src files: 75
dst files: 75
IDENTICAL: name, size and mtime match for every file
index segments: src 3, dst 3
mtime parity matters specifically because the Whoosh index segments carry their
own consistency expectations; `cp -a` preserved them. (The "can't preserve" lines
in the copy log were for the mount root /dst/. itself, not the files.)
Why: only this Deployment ever mounted the volume, and its contents are
single-writer state. Being on CephFS meant every access crossed the MDS --
measured with zero CI running, 22 requests/sec sustained and ~15 journal
events/sec against 2 directory commits per 180s, i.e. cap/inode churn rather
than file writes. That accounted for most of the constant 7-8 GB/day on
cephfs-metadata, which is a size 3 pool.
cephfs-metadata stays at size 3 deliberately: losing it destroys the entire
filesystem rather than the objects on one OSD, and the 275 GiB in cephfs-data0
depends on it.
paperless-data is retained (prune: disabled) as the rollback. It must NOT be
deleted until search has been confirmed returning results -- that is what proves
the index survived, not merely that paperless starts.
Refs #434
Co-Authored-By: Claude Bot <noreply@anthropic.com>
paperless-data is declared ReadWriteMany on ceph-filesystem, but only ONE pod
mounts it -- the paperless Deployment itself. Its contents are all single-writer
state: the 50 MB Whoosh index, classification_model.pickle,
celerybeat-schedule.db, log/, migration_lock. 75 files, nothing shared. Only
`consume` and `media` genuinely need RWX, because the ftp-scanner writes to those
from another node.
It is on CephFS by default, not by requirement, and every access goes through the
MDS. Measured 2026-08-20 with ZERO CI pipelines running:
paperless-data client request_load_avg 22 (all other sessions 0-1)
MDS over 180s 4,052 client requests = 22.5/s
2,718 journal events = 15/s
2 dir commits <- not file writes
Cap and inode churn from repeated access, not data being written. That accounts
for most of the constant 7-8 GB/day on cephfs-metadata, and since that pool is
size 3, roughly 21-24 GB/day reaches the drives.
cephfs-metadata deliberately STAYS at size 3. Losing it destroys the whole
filesystem rather than the objects on one OSD, and the 275 GiB in cephfs-data0
rides on it. Cutting writes at source is the fix; cutting replication is not.
PHASE 1 ONLY, and inert: the PVC is created empty and nothing mounts it. The data
copy and the deployment repoint are separate steps, documented in
MIGRATION-data-to-block.md along with why the copy needs paperless stopped (the
Whoosh index and celerybeat schedule are both live-written, so copying under an
active writer gives a torn read).
Honest sizing: ~21-24 GB/day off the drives against ~432 GB/day cluster-wide, so
about 5%. This is a correctness fix -- a single-writer volume does not belong on
a shared filesystem -- more than a large win. It also removes 22 req/sec of MDS
load, which benefits Woodpecker CI workspaces sharing the same MDS.
Refs #434
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Ten Postgres instances across seven CNPG clusters are ~48 GB/day of the
cluster's ~114 GB/day of client writes, and only ha-pg carried any
write-reduction tuning. The rest ran Postgres defaults, which favour throughput
over storage that wears out.
MEASURED, not assumed. ak-pg since 2026-05-17:
checkpoints_timed 27,624 = 291/day, i.e. one every 5 min (the default)
buffers_checkpoint 25,801,628 = ~206 GB flushed
database size 1,046 MB
That is the whole database rewritten roughly twice a day. The pathology is
specific to idle databases: sessions, tokens and job state re-dirty the same few
pages constantly, and checkpoint_timeout=5min forces each of them to disk 288
times a day instead of letting them coalesce. At 15min they are written a third
as often.
max_wal_size is raised alongside it. Without that, checkpoints trigger on size
instead and the timeout change does nothing. It also bounds crash recovery to at
most 2GB of WAL replay.
Applied to ak-pg, pprl-pg, tr-pg, wp-pg, im-pg, gf-pg. ha-pg already had it.
synchronous_commit is deliberately NOT changed here. It is off for ha-pg because
a state recorder is telemetry; these clusters hold credentials, documents and job
state, where losing the last few hundred ms of commits on an unclean shutdown is
not an acceptable trade for write volume.
Separately, ha-pg shared_buffers 256MB -> 512MB. After 15h on Postgres its
buffers_backend was 629,704 of 939,025 total page writes -- 67% written by
backends rather than the checkpointer or bgwriter, which means the working set
does not fit in the buffer pool and pages are written out repeatedly instead of
coalescing. Memory limit raised 1Gi -> 1536Mi to keep the same headroom (measured
383Mi in use, of which 256MB was shared_buffers).
Verified before commit by rendering every cluster and asserting the tuning landed
under spec.postgresql.parameters with the barman plugin block untouched. That
check exists because the first attempt at this matched the wrong `parameters:`
key -- the barman plugin's, at 6-space indent under plugins: -- and corrupted
wp-pg's barmanObjectName. Reverted and redone with an indent-aware match.
Refs #434
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Follow-up to the trmnl renderer finding. An `emptyDir` without `medium: Memory`
is NODE STORAGE, which is easy to read as "ephemeral, therefore free" -- it is
ephemeral, but every byte still hits the node's disk.
Survey of the repo: 23 emptyDir declarations, only 2 RAM-backed. This converts
12 of the remaining ones.
HONEST SCOPE: this buys almost no write reduction. Ranking every pod by OS-disk
writes over 6h shows trmnl-renderer at 67 GB/day (fixed separately) and then
nothing emptyDir-driven -- the rest of the top of that list is Ceph mons
(hostPath, not emptyDir), kube-apiserver, and container logs from databases.
Every volume converted here measured 8.0K in the running pod:
/var/lib/code-server 8.0K
/mosquitto/auth 8.0K
/state (z2m guards) 8.0K
So the value is correctness and, for mosquitto, keeping credential material off
the node's filesystem: that volume holds the generated passwd/acl files.
Each converted volume gets an explicit sizeLimit (16Mi where none existed), so
tmpfs cannot silently consume a container's memory limit. All are orders of
magnitude above measured usage.
Behaviour is unchanged otherwise: an emptyDir persists for the pod's lifetime on
either medium, so the mosquitto shim's assumption that the passwd file survives
a container restart still holds.
DELIBERATELY NOT CONVERTED:
- kubernetes/talos/cilium.yaml and talos/patches/cilium-cni.yaml -- vendored
and generated from the chart; a hand edit would be lost on upgrade.
- trmnl/renderer.yaml -- converted separately, where the actual 34 GB/day was.
Cost: this rolls the affected pods once.
Refs #434
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The renderer was the single largest writer in the cluster -- more than every
Ceph OSD and every database combined -- and none of it needed to touch disk.
Measured 2026-08-20 from the container's own cgroup io.stat:
253:0 (node /dev/vda5) 249,092,697,088 bytes over 7.3 days = ~34 GB/day
252:48 (its own PVC) 340 MB total = negligible
So the writes were not going to its volume at all; they were going to the
node's filesystem via a disk-backed emptyDir. `emptyDir: {}` without
`medium: Memory` is node storage, which is easy to read as "ephemeral, so
free".
The cause is cadence rather than volume. schedules.template.json renders on
"* * * * *", so Chrome is launched 1440 times a day and each launch creates,
fills and deletes a /tmp/puppeteer_dev_chrome_profile-* directory. At rest /tmp
holds under 8 MB -- it is pure churn for data that never outlives the render.
tmpfs pages count against the container's memory limit, so the 512Mi cap is
kept deliberately: measured usage is 129Mi against a 2Gi limit, leaving ample
headroom even if the cap were fully consumed.
Expected effect: ~34 GB/day off the OS disks, which measured 215 GB/day over a
4h window. This is a bigger cluster-wide reduction than the Home Assistant
recorder migration achieved, for a one-line change.
Refs #434
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Net -44 lines. The previous version assembled the connection URI from
username/password/dbname, which forced percent-encoding, YAML-safe quoting via
json.dumps, a YAML round-trip validation, and python3 from HA's image.
None of that was necessary: CNPG already publishes a finished, percent-encoded
connection string in the app secret as `uri` / `fqdn-uri`. Reading that key
removes the whole class of problem the earlier review correctly flagged --
rather than solving it more carefully.
Verified against the live secret before simplifying: fqdn-uri contains only
[A-Za-z0-9:/@._%-], so naive double-quoting is provably safe and the YAML
validation was guarding against an input that cannot occur.
What is kept, because it is the part that actually matters: secrets.yaml is PVC
state holding every other HA secret (influxdb_token and friends), so the file is
filtered-and-appended rather than rewritten, moved atomically, and guarded
against shrinking. Tested in HA's own busybox shell -- comment and pre-existing
keys preserved, idempotent across runs, no duplicate key.
Also records why an env var cannot be used at all: HA removed `!env_var` from
its YAML loader, so `!secret` is the only mechanism for recorder.db_url, and
config-sync deliberately does not manage secrets.yaml.
Back to busybox; HA's image is no longer needed for this.
Refs #434
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Phase 2b is done: 12.77M statistics rows copied SQLite -> Postgres with HA
running and no downtime (read-only mount; SQLite WAL gives readers a consistent
snapshot).
statistics_meta 1449 OK
statistics 10799904 OK 153.9s
statistics_short_term 1969804 OK 27.0s
span in Postgres: 2024-03-13 -> 2026-08-19
1449 entities with long-term history, 2627859 rows carrying sum
database size 2252 MB against a 20Gi PVC
Records the high-water marks the cutover top-up must resume from, and two schema
details that cost a failed first attempt:
- has_mean/has_sum are INTEGER in SQLite, BOOLEAN in Postgres, and Postgres
will not coerce them.
- the legacy created/start/last_reset DATETIME columns are 100% NULL in both
bulk tables, which is what makes a tab-separated COPY safe.
Also documents why the schema was built from HA's own models with schema_changes
left EMPTY: HA's _initialize_database detects a new database via the
events.time_fired_ts index and writes SCHEMA_VERSION itself, so pre-stamping that
row would bypass HA's own initialisation.
ANALYZE was run on all three tables. After a bulk COPY the planner has no
statistics and HA seq-scans 10.8M rows on every history/energy view.
Refs #434
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Review catch on #524, and it was a genuine blocker.
The first version built "postgresql://${PGUSER}:${PGPASSWORD}@host/db" in
busybox sh with no encoding. Two defects:
1. The CNPG-generated password is random and may contain @ : / ? #, each of
which changes how the URL parses. This repo already hit this exact issue
with the same CNPG password-generation mechanism -- see
kubernetes/apps/woodpecker/server.yaml, which switched to a lib/pq
keyword DSN specifically to avoid escaping generated passwords. That
option does not exist here: HA's recorder.db_url must be a SQLAlchemy URL.
So the fix is percent-encoding.
2. Worse, and the reason this was worth blocking: a quote in the password
makes the YAML line malformed, so secrets.yaml stops parsing entirely and
HA loses EVERY secret, not just this one. The line-count guard could never
catch that -- the count is unchanged; the file is simply invalid.
Rewritten to run python3 from HA's own image (already pulled for the main
container, so no extra image) instead of busybox:
- urllib.parse.quote(..., safe="") on user, password and dbname.
- json.dumps for the YAML value: YAML is a JSON superset, so this emits a
correctly escaped double-quoted scalar even with quotes or backslashes.
- The file is still rewritten LINE-WISE rather than round-tripped through the
YAML parser, so hand-maintained comments and key order survive.
- The guard now validates the RESULT: parse the new content, assert no key
from the old file disappeared, and assert recorder_db_url round-trips to
exactly the URL that was built. That catches corruption the line count
cannot.
Verified in HA's image against a deliberately hostile password
(p@ss:w/o"rd#?&\x=1) before commit:
new version -> parses, comment preserved, idempotent, password decodes back
byte-exact, host and dbname parse correctly
naive version -> yaml.safe_load raises ParserError
i.e. the approach this replaces would have produced an unparseable
secrets.yaml.
Also updates MIGRATION-recorder-postgres.md for this step landing, including
why the ordering (init container before the configuration.yaml change) is
mandatory.
Refs #434
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Phase 2a of the recorder move off SQLite (MIGRATION-recorder-postgres.md).
Adds an init container that writes `recorder_db_url` into /config/secrets.yaml
from the CNPG-generated ha-pg-app Secret.
INERT until the recorder is repointed. It only adds a key to secrets.yaml;
nothing reads it until `db_url: !secret recorder_db_url` lands in
configuration.yaml in the homeassistant repo. That ordering is REQUIRED in this
direction — HA refuses to start when a referenced secret is missing, so the
config change must not go first.
Why an init container rather than a hand-added line: the password is generated
by CNPG and can be rotated, so a hand-written entry goes stale silently and HA
then fails to start on a bad password. Re-rendering on every pod start is also
what makes a rotation take effect.
secrets.yaml is PVC runtime state that config-sync deliberately does not manage
(it holds influxdb_token and others), so this must EDIT the existing file, never
replace it. The script filters out any existing recorder_db_url line, appends
the current one, and guards the result: if the rewrite would drop any
non-recorder line it aborts rather than truncating the file holding every other
secret HA needs. Written to a temp path and moved atomically, chmod 600.
Verified in HA's own Alpine/busybox shell against a fixed sample before commit
-- pre-existing keys preserved, guard reports old=3 new=3, and a second run
produces a byte-identical 4-line file (idempotent, no duplicate key).
Refs #434
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Seven Postgres clusters back up to Hetzner and nothing alerted if that stopped.
The only related rule was HetznerBackupEndpointDown, which probes the S3
endpoint — it proves the bucket is reachable, not that anything was written to
it. Same failure shape as the WordPress backup that failed nightly for three
days against a bucket declared in tofu but never applied: the status surface
looked fine because nothing checked the thing that mattered.
CNPGWalArchiveBacklog is the load-bearing rule. `ready` counts WAL segments
waiting in pg_wal/archive_status; steady state is 0 on every cluster. A
sustained backlog means the archiver is failing, so point-in-time recovery is
silently broken from that moment and pg_wal grows until it fills the PVC and
takes Postgres down. Threshold >5 sustained for 30m: a segment is 16 MiB, so
that is ~80 MiB of un-archived WAL — well below anything that threatens the
volume, far above idle noise. It reads only the instance-level collector, so it
works despite #522.
CNPGBackupFailed fires on a base backup failure within 24h, guarded on
timestamp > 0 so the epoch-zero default is not read as "failed in 1970".
DELIBERATELY NOT ADDED: the backup-age alert, which is the one you would most
want. `(time() - cnpg_collector_last_available_backup_timestamp) > 48h` cannot
be used today because that metric reads exactly 0 on every instance in the
cluster (verified across gf-pg, ak-pg-1/2, pprl-pg-2/3, im-pg, wp-pg, ha-pg).
CNPG has no record of any successful backup anywhere, because the Backup CRs it
derives that from are deleted within a minute of completing — #522. Adding it
now would fire permanently for all seven clusters and be silenced within a day,
which is worse than not having it.
The backups themselves DO work; verified independently by listing the bucket
with barman-cloud-backup-list and restoring a WAL segment back out of S3. The
gap is in the record, not the data.
Both expressions were validated against live Prometheus before commit rather
than written from the metric names: the WAL selector matches 8 real series (a
zero match would mean a dead rule, the defect fixed in
prometheusrule-woodpecker-rotation.yaml), and neither expression fires
currently, which is correct since archiving is healthy and the only recorded
backup failure is ~91 days old.
Refs #522
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The recorder's SQLite database is the largest client writer in the cluster.
Measured 2026-08-19 via cgroup io.stat on the home-assistant container,
corroborated by kernel diskstats and Ceph pool counters: 40 GB/day to its RBD
volume, ~26% of all client writes, against only ~5 GB/day of actual row data.
The 8x gap is the write PATTERN, not the volume:
~30 state changes/sec (107k rows/hour, 2.57M/day)
x2 SQLite WAL + checkpoint -- every dirtied page written twice
x4 ext4 journal + commit, since synchronous=FULL fsyncs every commit
(measured: 819 KB of 4 KiB writes -> 3.28 MB at the block device)
= ~15 KB written per recorded state change
Postgres replaces scattered fsync'd page rewrites with sequential batched WAL.
This attacks the multiplier rather than trimming what gets recorded, which would
hide the problem instead of fixing it.
PHASE 1 ONLY. The cluster comes up EMPTY and nothing consumes it -- HA stays on
SQLite. Deploying it is inert, so there is nothing to roll back if it misbehaves.
Phase 2 migrates the statistics tables and repoints recorder.db_url in the
homeassistant repo; MIGRATION-recorder-postgres.md has the sequence.
What phase 2 must not get wrong, recorded now while it is fresh: HA does NOT
migrate data between database engines. `statistics` holds 10,793,712 rows
spanning 2024-03-13 to today -- 2.4 years of energy history that is not in
InfluxDB and cannot be reconstructed. Repointing db_url at an empty database
silently discards it. `states` (18M rows) is disposable at purge_keep_days: 7.
Postgres is tuned to minimise write volume, which is the point of the move:
synchronous_commit off -- the recorder is telemetry, not transactional
record-keeping. Postgres stays crash consistent;
only the last few hundred ms of commits are at risk
on unclean shutdown. In exchange, commits stop
forcing an fsync -- the exact cost that makes SQLite
expensive here.
wal_compression on -- recorder writes are small inserts scattered across
pages, so post-checkpoint full-page writes dominate
WAL volume.
checkpoint_timeout 15min / max_wal_size 2GB
-- fewer checkpoints means fewer repeat full-page
images for the hot rows the recorder rewrites.
full_page_writes -- deliberately LEFT ON. RBD can tear a page across a
4 MiB object boundary; trading that for write volume
risks an unrecoverable database.
Also included:
- ObjectStore on its own s3 prefix (two clusters sharing a destinationPath
interleave WAL streams and corrupt both).
- ScheduledBackup at 02:50 UTC, offset from the other CNPG clusters.
- PodMonitor added WITH the cluster rather than after it, so the migration has
metrics from the start instead of discovering the gap later (#433).
- Cilium policies as DEDICATED policies with their own endpointSelector, not
rules on the namespace-wide default-deny -- that policy is endpointSelector:{}
so any rule there applies to every pod in the namespace, and :8000 is served
by more than the CNPG instance manager. Includes the ICMP allowance that
attaching L4 rules to the ha-pg endpoints makes necessary for PMTUD.
The hetzner-creds ExternalSecret reuses seed/paperless/hetzner-creds, the same
coupling #397 tracks for woodpecker. Noted in the file with the exact bao command
to fix it; the mount is `homelab`, so #397's recorded 403 on `bao kv list seed`
was a wrong-path error rather than missing permissions.
Refs #434, #397
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The three Ceph monitors were writing 240 GB/day between them for a ~106 MB
database. That was ~62% of all OS-disk writes on the nodes and roughly a
quarter of everything the cluster writes -- more than every client workload
combined.
Measured 2026-08-19:
paxos transactions ~99,000/day (1.15/s, sampled over 60 s)
paxos logical data 811 MB/day (21.9 GB over 27 d mon uptime)
ACTUAL mon disk writes 80 GB/day per mon, 240 GB/day for three
(cgroup io.stat: 2.15 TB / 27 d)
=> ~98x write amplification
Cause: mon_compact_on_trim, upstream default true, "compact a certain prefix
(including paxos) when we trim its old states". With paxos_trim_min at 250 and
~99k transactions/day, that is hundreds of forced range compactions per day,
each rewriting the store.
The churn driving it is not cluster activity. 99% of paxos versions are cluster
log and mgr stats -- logm 6.7M, mgrstat 4.4M, against osdmap's 9.6k. Every Rook
operator poll (mgr stat / versions / status / report / osd dump; 23 audit
entries per minute per mon) becomes a cluster-log entry, hence a paxos
transaction, replicated to all three mons. Reducing that polling is the
complementary fix and is tracked separately; this change removes the
amplification regardless of the rate.
This does NOT disable compaction. RocksDB's own levelled compaction still runs
and still reclaims trimmed keys; what stops is the extra forced compact_range
on every trim. Two backstops if that assumption is wrong:
- mon_data_size_warn (15 GB default) raises HEALTH_WARN, which CephHealthWarn
in monitoring-rules already alerts on.
- mon_compact_on_start is set to true here (upstream default false), so every
mon restart -- upgrade, node reboot, reschedule -- does a full compaction.
Cheap on a ~106 MB store.
Baseline for verification, mon.a cgroup io.stat at 2026-08-19T12:56:29Z:
wbytes=2154257645056, wios=22509683, uptime since 2026-07-23T13:20:44Z.
Note on methodology: cAdvisor's container_fs_writes_bytes_total roughly
double-counts here -- it reported 425 GB/day for OSDs where nvme0n1 shows 212,
and 155 GB/day for mons where cgroup io.stat shows 80. It was used only to rank
writers; every figure above comes from cgroup io.stat or kernel diskstats, which
reconcile with each other and with the drives' SMART counters.
Refs #434
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
With 3 OSDs on 3 hosts, size=3 meant every write landed on every drive in the
cluster. Per-drive write volume equalled TOTAL cluster write volume, so all
three drives wore at an identical rate and would have reached end-of-rated-life
together: measured 2026-08-19 from the drives' own SMART counters, 80/82/87%
endurance used, advancing ~0.13 points/day, exhausted between Nov 2026 and
Jan 2027 (#434). Replication gives no protection there — the wear-out is
correlated by construction, not independent.
size 2 cuts per-drive write volume by a third and desynchronises the wear.
min_size 1 is required, not incidental. Ceph does NOT lower min_size when size
is reduced; it was 2, and leaving it would make replicapool 2/2, where a single
OSD down blocks IO for its PGs. That would hang every RBD volume in the cluster
on every rolling node reboot and every OSD restart.
Accepted trade, stated explicitly: while degraded (one OSD down), a second
drive failure loses data, and at 80%+ endurance that window is not
hypothetical. What limits the blast radius is that CNPG barman and Velero both
ship offsite to Hetzner, so exposure is the RPO of those backups rather than
total loss. Node reboots must stay serialised with HEALTH_OK between them.
CephFS metadataPool deliberately stays at size 3: 467 MiB against data0's
275 GiB, so it contributes nothing measurable to wear, while losing it destroys
the entire filesystem rather than the objects on one OSD. The wear saving comes
from data0. The RGW pools in objectstore.yaml were already size 2.
One-time cost on apply: Ceph deletes the third replica of everything, which is
background IO, and raw used drops from ~1.4 TiB to ~0.95 TiB.
Refs #434
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
bluestore_prefer_deferred_size_ssd was set to 65536 and
bluestore_deferred_batch_ops_ssd to 64 as a QLC throughput tune. Ceph's SSD
defaults are 0 and 16. Reverted to the defaults, set explicitly so the stored
`ceph config` value is overwritten rather than merely un-declared.
prefer_deferred_size defers every write SMALLER than the threshold: it lands in
RocksDB's WAL first and is applied to the object store afterwards. That is a
double write, and at 64 KiB it caught essentially every write this cluster
makes -- SQLite pages are 4 KiB, Postgres pages 8 KiB. Ceph disables deferral on
SSD by default because solid state does not need the random-write batching that
helps spinning media.
Why the original tune was the wrong trade:
- The benchmark justifying it cannot have exercised it. The 2026-05-05
baseline used 4 MiB writes, 64x above the 64 KiB cutoff, so none of those
writes were ever deferred. The setting was validated by a workload it does
not affect.
- It doubles writes onto QLC, the lowest-endurance NAND type. Measured
2026-08-19 from the drives' own SMART counters: all three OSD devices at
80/82/87% endurance used, advancing ~0.13 points/day, i.e. rated life
exhausted between Nov 2026 and Jan 2027. Because size=3 on 3 OSDs, every
drive absorbs 100% of cluster writes, so they wear in lockstep and expire
together (see #434).
Measured amplification before this change: 640 GB/day written to the three NVMe
devices against 117 GB/day at the RBD client layer -- 5.5x, of which 3x is
replication and ~1.8x BlueStore. Removing the double write should take the
BlueStore factor toward ~1.1x.
The cluster is write-light, so throughput was never the binding constraint;
endurance is. Both parameters are runtime-updatable, so no OSD restart.
Also corrects the drive model in the comment: the OSD devices are
CT1000P3PSSD8 (Crucial P3 Plus), not the P2 named previously.
bdev_enable_discard / bdev_async_discard are unrelated and kept as-is.
Refs #434
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Two defects in the noise-log dedup, both of which silently mute real alerts.
1. Prose-mentioned fingerprints became suppressions.
The extractor grepped the WHOLE issue body for 16-hex tokens. Triage reasons
routinely cite another alert's fingerprint in prose ("see the issue filed for
fingerprint <fp>"), so those citations were read as suppression entries.
Verified against the live noise log: the old extractor yields 22 fingerprints
for 21 real entries. The extra one is 2ddc41edb689fc33 -- the crowdsec alert
that HAD been filed as a genuine issue, permanently muted purely because two
other entries mention it. Now only lines in the exact shape the write-back step
emits count:
- <fp> <ALERTNAME> — <YYYY-MM-DD>: <reason>
Re-verified with the new parser: 21, and 2ddc41edb689fc33 is no longer among
them.
2. Suppression never expired.
The fingerprint is sha256(alertname|scope) and is deliberately stable across
recurrences, so a single blip verdict muted that alertname+scope pair forever.
21 pairs were permanently muted, including openbao's KubePodNotReady,
KubeStatefulSetReplicasMismatch and KubePdbNotEnoughHealthyPods -- so a real
openbao outage would have filed no issue at all.
A noise verdict means "this occurrence was benign", not "this alert can never be
interesting again". Entries now expire after NOISE_TTL_DAYS (default 30) counted
from the date already present in each line. Re-triaging a recurrence weeks later
is cheap; missing an outage because a July blip muted it is not. If it is still
noise, triage re-adds it automatically.
Rollout is gentle by construction: every current entry is dated 2026-07-21 or
later, so at a 30d TTL the cutoff is 2026-07-20 and NOTHING un-mutes on merge --
the oldest entries lapse a day later, and only re-triage if they actually fire
again.
Unparseable lines are dropped, i.e. they stop suppressing: this fails toward
more alerting, never less.
Verified end-to-end by running the shipped snippet inside the real
ci-claude:2.1.218 image against the live noise log: cutoff 2026-07-20,
21 suppressions, prose-only fingerprint absent. Note that image ships BusyBox
date, not GNU -- `date -d '30 days ago'` errors there, so the cutoff uses epoch
arithmetic with `date -d @<epoch>`, which was confirmed working in that image.
Refs #326
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Review catch on #516: the restart-triggering mosquitto_pub was unbounded,
unlike the sibling call in zigbee2mqtt-interview-watch.sh.
Neither client bounds a TCP connect that HANGS rather than being refused, and a
stalled connect is most likely precisely when this guard runs -- around a broker
restart. Unbounded, the loop would block forever and stop logging, which is the
silent-failure mode the guard exists to prevent.
Applied to the reads as well, not just the publish: mosquitto_sub -W bounds the
wait for a message once CONNECTED, so it does not cover the connect phase
either. The timeout wrapper is set above -W so the protocol-level wait still
wins in the normal case.
Not mosquitto_pub -W: that flag does not exist for mosquitto_pub and makes every
publish fail on a usage error.
The cooldown stamp was already written only on a successful publish, so a failed
restart request still retries on the next cycle rather than burning the cooldown.
`timeout` is confirmed present in eclipse-mosquitto:2.0.22 (already used by
interview-watch, and exercised directly in this image).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
mosquitto runs `persistence false` with no PVC (deliberate and settled), so
every broker restart wipes the retained store. Zigbee2MQTT publishes its HA
discovery configs retained and has no way to restore them itself, so a broker
restart not followed by a Z2M restart leaves every Z2M entity unavailable in HA
indefinitely -- ~14 h on 2026-07-23.
Adds a discovery-guard sidecar to the Z2M pod that detects the wiped state and
asks Z2M to restart, which re-runs discover().
Detection. bridge/state and bridge/{info,devices,groups,definitions} are all
retained, but only bridge/state is republished on reconnect (mqtt.ts onConnect).
So "bridge/state present + bridge/groups absent" means Z2M is talking to this
broker but nothing has re-run start() since the store was wiped.
bridge/groups specifically, because the absent-half partner must not be
re-publishable by ordinary runtime events or it self-heals and the guard goes
blind while HA is still broken. bridge/devices, bridge/definitions and
bridge/info all reach inbound radio traffic via devicesChanged (receive.ts hands
deviceExposesChanged to every fromZigbee converter); bridge/health self-heals on
its own 10 min timer. bridge/groups is only republished by deliberate admin
actions, and publishGroups() always publishes, emitting `[]` when no groups
exist -- confirmed live: it currently holds a 2-byte payload, so presence is
testable.
Not AND-ed with bridge/info being absent. That would cut false positives at the
cost of false negatives, and the costs are asymmetric: a false positive is one
~60s Z2M restart, a false negative is every Zigbee entity dead until a human
notices. Tuned for sensitivity.
Spurious positives are handled by a 90s confirm re-check, which covers both the
startup race (bridge/state is published at mqtt.connect(), bridge/groups only at
the end of BridgeExtension.start()) and a dropped publish (these topics go out at
QoS 0). A 30 min cooldown keeps a Z2M that will not come up healthy from being
restarted in a loop.
Action is bridge/request/restart, which is a full in-process restart -- index.js
restart() -> stop(true) tears down every extension, then start() builds a new
Controller and re-runs HomeAssistant.start(). discover() then republishes only
missing or changed configs, which after a wipe is all of them.
Reuses the existing zigbee2mqtt broker credential (ACL `readwrite
zigbee2mqtt/#`), so no new broker user and no read grant on homeassistant/#,
which the ACL denies on purpose.
Verified in the eclipse-mosquitto:2.0.22 image the sidecar actually runs:
mosquitto_sub -C/-W, mosquitto_pub and `date -u +%s` all present; `sh -n` clean;
startup run logs correctly and enters the loop. Detection was exercised against
the live broker and correctly reports healthy (bridge/state online,
bridge/groups present) with no action.
NOTE: this rolls mosquitto, because the corrected ACL comment lives inside the
container command. That roll wipes the retained store, which the guard then
repairs within ~6 min if the Z2M roll does not already do so.
Closes#381
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Four comments across the broker manifests asserted that retained state is
re-populated by all clients on reconnect, and specifically that Zigbee2MQTT
re-publishes HA discovery when it sees the homeassistant/status birth message.
Both are false, and the second is the premise that kept issue #381 open.
Verified against Zigbee2MQTT 2.12.1 source:
- discover() runs only from HomeAssistant.start(); it is never called from
the reconnect path.
- lib/mqtt.ts onConnect() republishes bridge/state and resubscribes, nothing
more. republishRetainedTimer is armed only inside connect() and is never
re-armed on reconnect.
- lib/extension/homeassistant.ts onMQTTMessage(), on status_topic == "online",
republishes bridge/state plus cached device states after a hardcoded 30s
delay -- but never the discovery configs.
- Discovery is published retain:true, and the only knob is the global
mqtt.force_disable_retain, which upstream documents as breaking the HA
integration. Broker retention is the sole mechanism Z2M relies on.
- No bridge/request endpoint forces a rediscovery; upstream declined to add
one (Koenkk/zigbee2mqtt #27458, #22977, #16950, all closed NOT_PLANNED).
The mosquitto ACL was never the blocker: `read homeassistant/status` is already
granted. That grant is still correct -- the cached-state republish is what makes
HA show current values after an HA restart -- so it is kept and the comment now
says what it actually buys.
Also records that a RollingUpdate roll is equivalent to a broker restart for
retention: maxUnavailable:0/maxSurge:1 preserves connectivity, but the new pod
starts with an empty retained store.
Comment-only. The two deployment comments are plain YAML comments outside the
container command, so the rendered Deployment is byte-identical and the broker
does not roll; the ConfigMap carries no reloader annotation, so it updates in
place without restarting mosquitto.
Refs #381
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Stage 2 of the decommission the shim was written for. Deleting the file makes
the next apply destroy the three containers.
The containers were taken out of service months ago — they are stopped
(pve_up = 0 for all three) and rustfs-{1,2,3}.srv.renner.uno no longer resolve
— but the LXC objects and their disks still exist on saturn/jupiter/neptune.
Two earlier destroy attempts (#270) died instantly with "context deadline
exceeded", because the bpg provider reads timeout_delete from STATE and the
imported resources had stored 0.
That is now fixed: apply 5675 landed timeout_delete = 1800 and the rest of the
timeouts in state, in place, with 0 destroyed. The destroy has a real deadline
to work with for the first time.
Checked before removing, since the containers are tagged `state-backend` and
`terraform-backend`:
- The tofu backend is Hetzner S3 (renner-uno-tfstate at
fsn1.your-objectstorage.com), not rustfs. Destroying these cannot pull the
state out from under the apply. The tags are historical, from before that
migration.
- No Kubernetes or Ansible resource references rustfs.
- scripts/restore-authentik-db.sh mentions rustfs only as an `mc` alias name;
its endpoint is s3.renner.uno:9000, the Ceph RGW `migration` store.
- DNS for the three names is already gone.
Co-Authored-By: Claude Bot <claude-bot@renner.uno>
Both of these were learned the expensive way today and existed only in commit
messages and PR descriptions, which is not where anyone looks.
providers.tf carried a warning that a UniFi PUT may require _id in the body,
which restapi does not send, and that a 400 should be answered by tainting the
object so CI recreates it. That is wrong on this controller. Tested against a
live rule with exactly the body tofu sends: HTTP 200, object returned intact,
rule byte-identical before and after, 60 rules before and after. Confirmed at
scale by apply 5675 — all 60 modified, no 400s, ci.renner.uno and
immich.renner.uno still 200.
That wrong warning had a cost. A note saying an apply might break firewall
rules is one nobody argues with, so the apply did not get run, and the
renner-uno-k8s-mariadb bucket added in b976a67b sat uncreated for three days
while the WordPress backup failed nightly with "The specified bucket does not
exist". The warning is replaced with the evidence that disproves it.
unifi_nat_hairpin.tf now records that the 60-rule `- _id` diff is permanent and
cosmetic, and lists the four attempts to remove it with the plan number that
disproved each: ignore_changes_to (5661), ignore_all_server_changes (5662),
restapi 3.x ignore_server_additions (5667), and create_returns_object (5677).
The first three cannot work in principle — `data` is a configured attribute, so
Terraform core diffs it against state before provider-side ignore logic runs.
The fourth was the better theory, that PUT responses re-polluted `data`, and it
is wrong too: the diff returned on the plan immediately after the apply. That
means the response is written into `data` on the read path, and settling it
needs the provider source rather than more guesses at its schema.
No behaviour change. Documentation only, so the next person inherits the
findings instead of the dead ends.
Co-Authored-By: Claude Bot <claude-bot@renner.uno>
Root cause of the 60 permanently-dirty hairpin NAT rules.
The provider was configured write_returns_object = true, which makes it store
the API response into `data` after POST *and* PUT. The UDM assigns `_id`;
unifi_nat_hairpin.tf's data = jsonencode({...}) never sets it. So every write
put a field into state that the config does not have, and all 60 rules planned
as "will be updated in-place" with `- _id` as the entire diff — re-dirtying
themselves on the next write, indefinitely.
No provider-side ignore can suppress this, because `data` is a configured
attribute and Terraform compares config to state in core, before provider
logic runs. Three were tried and disproven against real plans rather than
argued about:
ignore_changes_to = ["_id"] plan 5661 — 60 remained
ignore_all_server_changes = true plan 5662 — 60 remained
restapi 3.x + ignore_server_additions = true plan 5667 — 60 remained,
plus a new api_data diff
create_returns_object keeps the part the provider genuinely needs — the POST
response is how it learns `_id` for id_attribute = "_id" — while no longer
letting updates rewrite `data` from the response.
This does not clear the existing pollution by itself: state still carries `_id`
in `data` for all 60 rules, so the plan will keep showing them until one apply
rewrites `data` to the configured value. What it changes is that the apply then
sticks, instead of the next write undoing it.
Co-Authored-By: Claude Bot <claude-bot@renner.uno>
Plan 5657 rejected the previous commit:
Error: Missing required argument
on lxc_800_rustfs_decommission.tf line 98, in resource
"proxmox_virtual_environment_container" "rustfs_decommission":
The argument "template_file_id" is required, but no definition was found.
The plan's own state dump showed only `type = "debian"` inside
operating_system, so mirroring it looked complete. It is not:
template_file_id is create-time-only, PVE does not report the original
template for an existing container, and nothing else in opentofu/ declares
one to copy — these three are the only container resources in the repo.
Guessing a template would be a lie that stays invisible until something
recreates these containers, which is precisely the event this file exists to
prevent. So operating_system is left undeclared and ignored via lifecycle
instead, which stops it planning as a removal without asserting a value that
is not known.
The timeouts remain outside ignore_changes on purpose — they are the one
thing this shim needs to actually apply.
Co-Authored-By: Claude Bot <claude-bot@renner.uno>
The v2 shim's own instructions say the plan MUST show an in-place update and
no replace before applying. It does not. Pipeline 5656 planned all three
containers as `must be replaced`, which would destroy and recreate LXCs
tagged critical / state-backend / terraform-backend instead of nudging a
timeout value into state.
Cause: v2 declared only node_name, vm_id, started, unprivileged and the
timeouts, on the stated assumption that "the other attributes mirror the real
containers so the plan stays in-place". They were not declared at all, so
every absent attribute planned as a removal — and two of those removals force
replacement:
- mount_point { ... } # forces replacement (size, volume)
- operating_system { ... } # forces replacement
Declaring the full attribute set, mirrored from the values the plan itself
reported out of state: cpu, memory, disk, mount_point, network_interface,
operating_system and initialization. hostname and mac_address differ per
container, so the local map carries them per key rather than being repeated
or guessed.
tags is declared for a separate reason: it was planning as
["critical","rustfs","state-backend","terraform-backend"] -> null, which does
not force replacement but would have stripped the tags off the live
containers on apply.
This does not unblock the WordPress backup on its own. That needs
renner-uno-k8s-mariadb, which the same plan wants to create — but the bucket
cannot be applied while the plan also carries three container replacements,
and a -target apply is not an acceptable way around it: it diverges state
from config and leaves the real problem in place.
Verification is the file's own gate — a plan showing in-place only.
Co-Authored-By: Claude Bot <claude-bot@renner.uno>
Rebased onto master now that #511 landed the WOODPECKER_URL fix for both
rotators — that part is dropped from here rather than duplicated. What remains
is the half nothing else covered.
All four rules in prometheusrule-woodpecker-rotation.yaml were selecting
series that do not exist, so the whole group was silent:
- WoodpeckerServerNotReady queried kube_statefulset_status_replicas_ready.
The server became a Deployment when the sqlite->CNPG migration dropped its
PVC, so that metric has no series at all — a `critical` "all CI is down"
alert that could never fire, and had been dead well before the namespace
move. Now kube_deployment_status_replicas_ready in the woodpecker namespace.
- WoodpeckerAgentNotReady selected namespace="apps". Broken by the namespace
migration; mine.
- The two woodpecker-secret-rotate rules selected namespace="apps", but that
rotation runs from the openbao namespace. Broken since that move, which the
woodpecker kustomization documents.
Verified against live Prometheus instead of reasoned about: server ready=1,
agent available=1, cronjob 1 series. The originals returned nothing, which is
exactly why they never fired rather than firing wrongly.
Two stale claims in the same file corrected while here: it pointed at
kubernetes/apps/woodpecker/rotate-agent-secret.yaml, which no longer exists,
and asserted the CronJob/Job series "stay empty until the rotation feature is
merged" — that rotation has since landed in openbao.
Also finishes the netpol comments #511 left mid-update, which still credited
woodpecker-allow-rotators to `apps/*`. gitea.apps.svc:3000 in review-bot.yaml
is deliberately untouched: gitea really is still in apps.
Co-Authored-By: Claude Bot <claude-bot@renner.uno>
From the update audit (#426), which flags this as the one item warranting
prompt action. Confirmed live: woodpecker-server runs v3.17.0 while the lint
step still pinned the v3.16.0 CLI.
That gap is the whole point of the step. The CLI compiles pipeline configs
against its own schema, so one behind the server can pass a config the server
then rejects — the gate stops predicting what the server will do, which is the
only thing it exists to do.
Verified the bump does not trade one problem for another: pulled
v3.17.0-alpine and ran the step's own lint loop over all 18 files in
.woodpecker/. Every one passes, so v3.17's schema does not reject anything
currently committed.
The drift is structural, not an oversight, and the comment now says so instead
of implying the two versions track each other. The server is a Kubernetes
manifest and image-automation bumps it; this pipeline file is plain YAML with
no apiVersion/kind, which Flux cannot patch (fluxcd/flux2#2826, recorded in
infrastructure/image-automation/README.md). So the server always moves first
and this always trails until someone bumps it by hand. Caught here by the
audit rather than by CI, which is the arrangement working as designed.
Also drops two stale "v3.16.0" references in the surrounding commentary that
would have aged into the same confusion.
Co-Authored-By: Claude Bot <claude-bot@renner.uno>
Closes#433.
Deletes the four apps-namespace manifests, promotes the migration-* set onto
their names, and gives the surviving Cluster the prune: disabled data guard it
was deliberately denied while a rollback still existed. After this the
kustomization renders nothing into `apps` at all.
Merging this deletes nothing. The old resources carry prune: disabled, so
dropping them from git only stops Flux managing them — they keep running and
keep their PVC. The teardown is a separate, deliberate act, and the runbook
carries the commands plus the precondition to check first.
That precondition is already satisfied: the new cluster took its own base
backup to the wp-pg-woodpecker prefix (wp-pg-daily-20260818205831, completed)
and reports Initialized, ConsistentSystemID, Ready, ContinuousArchiving and
LastBackupSucceeded all True. Recovery no longer depends on the retired
cluster's data.
Two things kept rather than cleaned up, both deliberate:
- bootstrap.recovery and its externalCluster stay on the Cluster. CNPG honours
bootstrap only when PGDATA is absent, so it is inert on a live cluster — and
keeping it means a cold rebuild restores from backup instead of coming up
empty, which is the gap RECOVERY.md exists to close for the other clusters.
- wp-pg-store-source stays, pointing read-only at the old prefix. Nothing
writes to it, and it is a second independent restore point predating the
move — worth having until the new prefix builds real backup history. It is
also the actual safety net for the teardown, rather than the running cluster.
The hetzner-creds comment now records the openbao ClusterSecretStore allowlist
requirement that cost stage 1 a failed restore (#505), so the next namespace
move does not rediscover it.
Co-Authored-By: Claude Bot <claude-bot@renner.uno>
The stage-1 verification section said row counts "will not match exactly if
builds ran after the backup the restore used — that is expected, and stage 2
quiesces the server before the final cutover".
Stage 2 does not quiesce. Flux prunes the apps workloads and creates the
woodpecker ones; nothing stops writes to the old database in between. The
sentence described an intent that was never implemented, which is worse than
saying nothing.
Measured on the live cutover rather than estimated: the restore captured
through pipeline 9488; 9491, 9492, 9494 and 9496 landed in apps/wp-pg before
the swap; the new cluster resumed at 9521. Four pipeline records and their log
entries exist only in the old cluster. No ID collision and no functional
breakage — cluster.yaml itself calls this database small and non-critical with
largely reconstructable state — but it is real history loss, and it should be a
decision rather than something discovered later from a row count.
Documents how to avoid it next time (suspend the KS, scale the old server and
agent to zero, re-run the restore) and notes the rows stay recoverable while
the old cluster keeps its prune guard, which is until stage 3.
Co-Authored-By: Claude Bot <claude-bot@renner.uno>
Follow-up to #506, which merged before this landed. Addresses the review's
stale-comment suggestion, and a real over-grant found while checking it.
The comment above woodpecker-allow-rotators still explained the rule in terms
of the `apps` baseline and allow-ingress.yaml. Chasing that down showed
allow-ingress.yaml is hard-scoped to `namespace: apps` and matches traefik by
label — so it does not apply in the new namespace, and the traefik admit I put
in the woodpecker baseline instead was broader than the thing it replaced:
endpointSelector:{} plus a whole-namespace source, where the `ingress`
namespace also holds netbird-ingress. That let those pods reach wp-pg and the
agent, not just the server.
Replaced with woodpecker-allow-traefik, scoped to traefik and to the server
pod, matching how the rotator and CI-step rules are already written.
It lives in network-policies/woodpecker-ns.yaml rather than beside the other
workload policies, deliberately: the baseline admit is withdrawn in the same
file, so both halves ship in the infrastructure-crds Kustomization and swap in
one reconcile. Split across Kustomizations they would not — infrastructure-crds
reconciles before the `woodpecker` KS, so the admit would be withdrawn minutes
before its replacement arrived and ci.renner.uno would 503 in the gap.
Confirmed safe against certificate renewal: letsencrypt-cluster solves DNS-01
through Cloudflare, so there is no in-cluster ACME solver pod needing ingress.
With an HTTP-01 issuer this scoping would have broken renewals silently, 90
days later.
Runbook: records that the stage-2 outage outlasts pods becoming Ready, because
certificates are namespace-scoped and cert-manager must reissue woodpecker-tls.
Observed during the live cutover as a TLS SNI failure with no HTTP status at
all, which reads like a routing fault and is not one.
Co-Authored-By: Claude Bot <claude-bot@renner.uno>
Addresses #433. This is the downtime window: Flux prunes the apps copies and
creates the woodpecker ones, so ci.renner.uno is unavailable in between and
in-flight pipelines die with their agent.
Moved into `woodpecker`: server, agent, service, ingress, pdb, the agent
ServiceAccount, the woodpecker-secret ExternalSecret, and the rotator ingress
policy. The server's DSN now points at wp-pg-rw.woodpecker.svc and the agent's
gRPC at woodpecker.woodpecker.svc:9000.
Stage 1's restore is verified before doing this, not assumed: the new cluster
reports Ready=True and ConsistentSystemID=True (both False on the apps copy for
three weeks), its row counts match the live database exactly — 6 repos, 6125
pipelines, 2 users, 659 MB — and cnpg_collector_up now has a woodpecker series
for the first time.
Cross-namespace edges that had to move with it:
- rbac.yaml's RoleBinding subject. The Role and RoleBinding stay in
woodpecker-ci, because that is where they grant pod create/delete; only the
subject namespace changes.
- The openbao rotators' egress, which targeted `namespace: apps` + name
woodpecker on :8000.
New: woodpecker-allow-ci-steps grants woodpecker-ci → server :8000, scoped to
the SERVER pod. Stage 1 left this out on purpose after review found the same
rule on the namespace baseline would have handed arbitrary build steps a route
to wp-pg, since the CNPG instance manager serves its admin API on :8000 too.
Post-stage-1 the datapath confirms step-pod identities reach wp-pg on ICMP types
only; this rule must not change that.
Deliberately NOT touched: cluster.yaml, objectstore.yaml, scheduled-backup.yaml
and hetzner-creds-externalsecret.yaml still describe the original apps cluster.
They are the rollback, and they keep their prune guards. Stage 3 retires them
and renames the migration-* set onto their names.
Also corrects the runbook. It told the next person to verify policy semantics
with `cilium-dbg policy trace`, which does not exist in Cilium 1.20 — the
subcommand was removed, leaving only get/selectors/subject-selectors/wait.
Replaced with reading the realized BPF policy map via `bpf policy get
<endpoint-id>`, which is better evidence anyway: it is the datapath as
programmed rather than a simulation, and it carries live byte/packet counters.
Co-Authored-By: Claude Bot <claude-bot@renner.uno>
Stage 1 of #433 is failing in the cluster. The wp-pg restore job errors
with:
can't get credentials for cluster wp-pg: while getting secret
hetzner-s3-creds: secrets "hetzner-s3-creds" not found
and the ExternalSecret behind it reports SecretSyncedError:
using cluster store "openbao" is not allowed from namespace
"woodpecker": denied by spec.condition
The ClusterSecretStore carries an explicit namespace allowlist, and the new
namespace was not on it. Its own header says so — "adding an ExternalSecret
in a NEW namespace requires adding that namespace here first, or ESO
reports 'not allowed to reference ClusterSecretStore' and the secret never
syncs" — so the requirement was documented and simply missed.
The reference sweep for #504 looked for everything that referenced
woodpecker or resolved *.apps.svc. It never asked the other question a
namespace move raises: what allowlists must the NEW namespace join? This
allowlist is exactly that shape, and it is the kind of thing kustomize
build and dry-run cannot surface, because the manifests are all valid — the
denial happens at ESO's admission of a cross-namespace reference.
Added in sorted position, keeping the list's stated ordering.
Co-Authored-By: Claude Bot <claude-bot@renner.uno>
From the fourth review on #504 — no blocking issues, but this one is a real
gap rather than a style point.
The woodpecker baseline was the only one of the repo's namespace policies
without an ICMP allow. That matters here specifically: wp-pg-allow-cnpg-operator
attaches an L4 rule (toPorts :8000) to the wp-pg pods, and Cilium blocks ICMP
to an endpoint once any layer 4 policy selects it unless the traffic is
CT-related. So PMTUD Destination Unreachable and Packet Too Big toward wp-pg
would have been dropped silently, surfacing as stalled transfers rather than
as a policy denial.
Uses the 16-type set the other baselines now carry after #495 trimmed them
from 39, rather than reintroducing the old list.
Granting this namespace-wide does not contradict the caution comment above it.
The :8000 case had to be per-workload because that port is shared between the
woodpecker server and the CNPG instance manager's admin API, so a blanket rule
handed CI step pods a route to the database. ICMP echo and path-MTU messages
expose no API surface, so a namespace-wide grant concedes nothing a scoped one
would withhold — which is why every other baseline does it this way too.
Co-Authored-By: Claude Bot <claude-bot@renner.uno>
Addresses the third blocking review finding on #504.
The PR claimed the namespace move fixes wp-pg's absent metrics. It does not,
on its own. Prometheus requires the `release: kube-prometheus-stack` label
that CNPG's own enablePodMonitor omits, so every scraped cluster has a
hand-written PodMonitor in apps/monitoring-rules/cnpg-podmonitors.yaml —
ak-pg, im-pg, gf-pg, pprl-pg. There has never been one for wp-pg.
So wp-pg was missing both halves: no scrape target configured, and no
monitoring ingress allow in the apps baseline. Fixing the policy half was
necessary but not sufficient, and the runbook's cnpg_collector_up check
would have returned empty either way — unable to confirm the thing it
existed to confirm. Adds the PodMonitor in the woodpecker namespace.
Also from the review:
- Added a ScheduledBackup for the restored cluster. Every other CNPG
cluster here pairs isWALArchiver with one. Without it the new
wp-pg-woodpecker prefix takes continuous WAL but never a base backup, so
it has no independent recovery point and wp-pg-store's 30d retention has
nothing to prune against — the WAL chain grows unbounded for as long as
stage 1 sits before cutover. Scheduled 02:40, clear of the apps cluster's
02:35 and the other clusters' 02:30.
- Documented that the `woodpecker` KS goes not-Ready while the restore runs.
Its healthCheckExprs matches Cluster by GVK with no name qualifier, so
Flux evaluates it against both the live apps/wp-pg and the restoring
woodpecker/wp-pg, and wait: true makes the KS that owns production
Woodpecker report unhealthy. Expected, does not cascade since nothing
dependsOn it, but it would read as an outage without a note.
- Dropped the app.kubernetes.io/name label from the new Namespace; no other
namespace in that file carries one.
Co-Authored-By: Claude Bot <claude-bot@renner.uno>
Addresses the second blocking review finding on #504.
bootstrap.recovery set only `source`. The live CRD documents the defaults:
`database` defaults to `app`, and `owner` defaults to whatever `database`
is. Neither name exists in the physically restored data, which carries
woodpecker/woodpecker from the backup.
So CNPG would have restored the real data, then provisioned a separate
empty `app` database and pointed the generated wp-pg-app Secret and the
-app Service at that instead — a cluster reporting healthy, holding the
right bytes, with the credentials aimed at the wrong database. The runbook's
own verification (psql -U woodpecker -d woodpecker using the wp-pg-app
password) would not have authenticated, so the failure would have surfaced
as a confusing auth error rather than as what it was.
kubernetes/RECOVERY.md sets both fields on all three recovery examples it
documents (ak-pg, im-pg, pprl-pg) for exactly this reason; this one did not
follow the pattern.
Added a runbook step to read dbname/username back out of the wp-pg-app
Secret before the row-count checks, so the mismatch is caught directly
rather than inferred from a psql failure.
Co-Authored-By: Claude Bot <claude-bot@renner.uno>
Addresses the blocking review finding on #504.
The "step pods call the server back on :8000" rule was attached to the
namespace baseline, which uses endpointSelector: {}. A toPorts block
narrows the port, not the destination workload — that is governed solely by
the enclosing policy's endpointSelector. So the rule granted woodpecker-ci
access to :8000 on every pod in the namespace, and the CNPG instance
manager serves its status API on :8000 (server.yaml:94 uses the same port).
Arbitrary repo-supplied build steps would have had a route to wp-pg's
instance manager.
That is the same endpointSelector:{}-means-blanket-grant failure this PR
exists to escape, reproduced inside the fix.
Removed rather than rescoped: there is no woodpecker server in this
namespace until stage 2, so the rule was premature as well as wrong. It
lands there as its own policy selecting the server pod, the way
woodpecker-allow-rotators already scopes its :8000 rule.
The baseline now carries no port-scoped rules at all, so nothing in it can
be mistaken for workload scoping, and a comment warns why that must stay
true.
Also from the review:
- Corrected the KS attribution. The network policies ship with
infrastructure-crds (infrastructure/post-crds includes
../network-policies/), not the top-level infrastructure KS. The ordering
conclusion is unchanged — infrastructure-crds dependsOn infrastructure,
and woodpecker dependsOn both — but the comments named the wrong one.
- Documented why the baseline has no egress section, instead of leaving it
to read as an oversight. Writing that ruleset in stage 2, with the server
and agent present, beats guessing it now and breaking the WAL archiving
this stage exists to verify.
- Dropped the monitoring -> :9187 rule from wp-pg-allow-cnpg-operator. The
baseline already allows the monitoring namespace unrestricted, so it added
no coverage while implying scoping it did not provide.
- Added a cilium-dbg policy trace step to the runbook. dry-run validates
manifest shape, not Cilium semantics, and would not have caught this bug.
Co-Authored-By: Claude Bot <claude-bot@renner.uno>
Addresses #433. No cutover, no CI impact: this stands up the `woodpecker`
namespace and restores wp-pg into it from barman, running in parallel with
the live apps/wp-pg. Nothing points at it yet.
Why a namespace move rather than a policy fix. wp-pg has been Ready=False
with "Instance Status Extraction Error" for three weeks because the CNPG
operator in `database` cannot reach https://<pod-ip>:8000/pg/status. The
apps default-deny-ingress uses endpointSelector:{}, so the only
namespace-level remedy is to allow the whole database namespace in — which
would expose gitea, gatus, external-dns and ical-proxy along with wp-pg, to
fix one pod on one port. The same gap explains why cnpg_collector_up has
series for authentik, immich, monitoring and paperless but not wp-pg: apps
never allowed the monitoring namespace either.
woodpecker-ci is deliberately not the target. It enforces pod-security:
privileged and exists for ephemeral step pods running repo-supplied code;
the database has no business sharing it.
Two ObjectStores, deliberately. wp-pg-store-source reads the existing
s3://renner-uno-k8s-cnpg/wp-pg prefix; wp-pg-store archives to a new
wp-pg-woodpecker prefix. Two clusters writing one destinationPath would
interleave their WAL streams and corrupt both, and splitting them keeps the
pre-migration backup intact as rollback.
The Namespace is declared in infrastructure/namespaces rather than beside
these workloads: its network policies ship with the `infrastructure` KS,
which the `woodpecker` KS dependsOn, so creating it in the workload KS would
invert that order and deadlock a cold rebuild.
The restored cluster deliberately carries no prune: disabled guard. The
original has one because it holds the only copy of the data; this one is
reconstructable, and a prune guard on a migration artifact is how orphans
outlive an abandoned migration. It gains the guard in stage 3.
Barman creds still resolve from seed/paperless/hetzner-creds. #397 wants a
woodpecker-owned path and this was the natural moment, but creating it needs
OpenBao write access that is not available here (bao kv list seed -> 403).
Pointing at a path that may not exist would leave the restored cluster
unable to archive WAL, which is what this stage exists to prove.
Runbook, including how to verify the restore holds real data rather than
merely coming up healthy: MIGRATION-namespace.md.
Co-Authored-By: Claude Bot <claude-bot@renner.uno>
Addresses #434.
Ceph's 30% default assumes the mon owns its filesystem, where 30% free is
a real reserve. Our mons sit on dataDirHostPath /var/lib/rook — the node's
/var, shared with ~29 GB of containerd storage — and the mon DB is ~106 MB.
The default therefore measures container churn rather than Ceph state, and
k8s-2 trips MON_DISK_LOW whenever its image cache fills.
Tuning image GC does not help: measured on k8s-2, dropping the GC high
threshold to 60 deleted 28 images and moved free space by 0.02 percentage
points, because most of /var/lib/containerd is overlayfs snapshots held by
running containers, which image GC cannot reclaim.
20% of a 60 GB /var still leaves ~12 GB behind a 106 MB database.
mon_data_avail_crit is untouched at 5%, and CephMonDiskLow watches /var
directly for the real risk — the node filling, not the mon growing.
Set through cephConfig so it is reconciled from git rather than applied as
a live `ceph config set`.
The comment records that this override should be revisited, and dropped,
when mons get their own volume at bare-metal migration. That is not
possible on the current cluster: every StorageClass is Ceph-backed, so a
mon PVC would be circular, and Rook applies mon.volumeClaimTemplate only
to newly created mons.
Co-Authored-By: Claude Bot <claude-bot@renner.uno>
The 60/50 change in #500 was based on a wrong premise. Reverting the
values and correcting the reasoning recorded around them.
Applied to k8s-2 alone and measured. GC did fire: 28 images deleted,
content store 9.93 -> 8.62 GB. Free space moved 31.49% -> 31.47% — no
effect.
The premise was that ~19 GB of overlayfs snapshots would be reclaimed
along with their images, at roughly 2.9x the compressed size. That is
wrong. /var/lib/containerd is 20.5 GB of snapshots against 8.6 GB of
content, and those snapshots are unpacked layers shared with running
containers. Image GC cannot touch them, so deleting unused image
references frees only their unshared blobs. Remaining reclaimable
content is now ~0.7 GB; further sweeps free nothing.
70/60 stands on its own merits as a bound on the image cache — it is
simply not a lever on MON_DISK_LOW, and the comment no longer claims it
is. The mon's own data is ~106 MB, so a 30%-free threshold on a 60 GB
filesystem it merely shares says nothing about Ceph.
The CephMonDiskLow runbook text carried the same wrong claim and is
corrected to point at finding the real consumer instead.
k8s-2's live kubelet is already back to 70/60 via talosctl patch; node
Ready, Ceph HEALTH_OK with mon quorum a,b,c intact. k8s-1 and k8s-3 were
never changed.
Co-Authored-By: Claude Bot <claude-bot@renner.uno>
Addresses #434.
Gap 2 — no admin path. There is still no rook-ceph-tools deployment, so
ceph status, ceph health detail, ceph osd df tree, ceph osd perf and ceph
device ls are all unreachable during an incident: mons, OSDs and mgr
mount no admin keyring and the operator's /etc/ceph is empty. Adds the
upstream toolbox from rook v1.20.4 (matching the running operator image)
with the image pinned to the cluster's own quay.io/ceph/ceph:v19.2.5 and
carrying the same imagepolicy marker as cephcluster.yaml, so the client
cannot drift ahead of the mons. Prerequisites verified present: the
rook-ceph-default ServiceAccount, the rook-ceph-mon-endpoints ConfigMap,
and ceph-secret/ceph-username in the rook-ceph-mon secret.
Image GC. The thresholds were already lowered once from the kubelet
defaults, to 70/60, explicitly to stay under Ceph's mon_data_avail_warn.
But that line is <=30% free and a high of 70 fires at exactly 30% free —
on the threshold, not below it. So the cache fills to precisely the point
where the mon warns, and MON_DISK_LOW trips before kubelet reclaims
anything. Observed on k8s-2: 29.81% free and HEALTH_WARN MON_DISK_LOW,
clearing to 31.64% once GC ran. 60/50 fires at 40% free and reclaims to
50%, leaving 10 points of margin.
There is plenty to reclaim, so the lower threshold will bite: containerd
holds ~29 GB of k8s-2's 60 GB /var and caches 179 images against 60 in
use, some dating to May. (The ~309 GB talosctl attributes to
/var/lib/kubelet is mounted Ceph PVCs counted through mount points, not
local disk.)
Alerting, the follow-up #434 parked until ceph_* series existed — they do
now, via #432. CephHealthWarn deliberately waits 6h: Ceph warns for
self-clearing conditions and paging on those teaches people to ignore it,
so what is worth waking for is a warning that does not clear.
CephHealthError fires at 5m. CephMonDiskLow watches /var free directly
rather than going through Ceph, because this fires for a full image cache
rather than for Ceph growth, and naming that keeps the next person from
debugging the wrong subsystem.
NOTE: cluster.yaml is a bootstrap patch. Merging changes nothing on
running nodes — the live kubelet value needs talosctl patch machineconfig.
Co-Authored-By: Claude Bot <claude-bot@renner.uno>
The earlier commits in this branch raised policyMapMax and added an alert.
Neither addresses why the map fills. This does.
Measured on k8s-1 with cilium-dbg: 8 endpoint policy maps sit at exactly
16384 entries — full — and the rest cluster at ~8,500. The split tracks
policy direction, so one direction costs ~8,500 entries. Dumping velero's
endpoint 2328 (8,499 entries, ingress only) shows 217 identities x 39
port/proto values, of which 38 are ICMP types. The map is ~99% ICMP, and
3,744 of its entries (44%) belong to woodpecker-ci-step identities.
Two multiplying causes, both fixed here.
The ICMP rule in every default-deny-ingress allowed 39 enumerated types
from `namespace: Exists` — every identity in the cluster. Cilium expands
that to one entry per (identity, type), per endpoint, per direction, in
19 namespaces. The rule's own comment records it was widened "from the
error class to the full standard type set"; that widening is the cost.
Trimmed to 16: the error types that motivated the rule (v4 3/11/12, v6
1/2/3/4 — PMTUD is the documented need), echo, and the IPv6 ND/RA/MLDv2
types observed in flight via Hubble (133, 135, 143). Dropped types are
deprecated (v4 4 Source Quench, RFC 6633), router-only (v4 5, v6 137),
obsolete (v4 13-18, 30), superseded (v6 130-132 by 143), or never
deployed (v6 138, 141/142, 148/149, 151-153). openbao-ns.yaml already
runs an error-only set of 7 in production, so 16 is the conservative side
of existing practice.
Cilium had no `labels` filter, so identity came from all pod labels.
Woodpecker stamps each step pod with woodpecker-ci.org/task-uuid and
step=<name>, making every build step its own security identity — 96 of
them minted in the last hour, against zero pods in the namespace. The GC
is healthy and simply outpaced. Excluding those two label patterns
collapses 78 current identities to one. No CiliumNetworkPolicy selects on
them, so they bought churn and nothing else.
Together these take a direction from ~8,500 entries to roughly 140
identities x 17 values ~= 2,400 — about 4,800 for both directions, well
inside even the old 16384 ceiling. policyMapMax stays raised as headroom,
not as the fix.
Per Cilium's docs, existing identities are not recomputed by a `labels`
change; new ones use the filter and the old ones age out through normal
GC, so the map drains over roughly an hour rather than instantly.
Co-Authored-By: Claude Bot <claude-bot@renner.uno>
renner.uno and www.renner.uno were pinned to 159.69.42.237, the VM that hosted
WordPress before it moved into the cluster. Neither record is live on the UDM
any more (verified: a LAN query for www.renner.uno returns the public answer,
proxy.renner.uno), so the file was drift waiting to be re-applied — a tofu
apply would have pointed the house at a host that is being decommissioned,
while the rest of the world already reaches the cluster.
Their absence is the correct end state, not an omission: www.renner.uno
carries dns.renner.uno/public, so external-dns-unifi writes no UDM record by
design and LAN clients take the public path and hairpin back in. The apex
stays with Cloudflare, which now redirects renner.uno/* to www.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014giKN9N6e5J2DF8QZmVh98
Two optional points from the second review on #495.
The PrometheusRule alerts on cilium_bpf_map_pressure without filtering on
map_name, so it covers conntrack, NAT and LB maps as well as the policy
map. That is intended — running out of any of them degrades the datapath
— but the PR is framed around the policy map, so a reader could take the
narrow reading. Say so in the file.
The cross-references between the three copies of bpf-policy-map-max were
one-directional: helmrelease.yaml and patches/cilium-cni.yaml each named
only one other site, while talos/cilium.yaml named both. Each now names
the other two.
Not taken: the suggestion to quote policyMapMax as "65536". The chart
declares it `type: [null, integer]` in its values schema
(helm show values cilium --version 1.20.0), so an integer is correct and
a quoted string would be the schema violation.
Co-Authored-By: Claude Bot <claude-bot@renner.uno>
Addresses the blocking review finding on #495.
Raising bpf.policyMapMax only in the HelmRelease left the bootstrap path
on the old value. kubernetes/bootstrap.sh:126 passes
kubernetes/talos/patches/cilium-cni.yaml to talosctl apply-config for
every node, and that manifest hardcoded bpf-policy-map-max: "16384" — so
a cold rebuild would install Cilium with the map size this PR exists to
fix, and stay there until Flux reconciled the HelmRelease.
The sibling bpf-lb-map-max is "65536" in both files, matching the live
agent config, so keeping these in sync is the repo's existing practice.
kubernetes/talos/cilium.yaml carries the same key and is updated too.
Nothing in the repo references that file — only patches/cilium-cni.yaml
is used by bootstrap.sh — so it looks like an orphaned rendered snapshot.
Syncing it rather than deleting it: whether it should exist at all is a
separate question from this fix.
Each of the three sites now names the others, so the next change to this
value has the lockstep written down where someone will hit it.
Co-Authored-By: Claude Bot <claude-bot@renner.uno>
Closes#451. Closes#454.
Both issues are the same fault: a pod's dedicated cilium_policy_v3_<id>
BPF map ran out of space, endpoint regeneration failed with "no space
left on device", the CNI ADD call never returned, and the pod sat in
sandbox creation. For paperless — replicas: 1 with strategy Recreate —
that was a 41-minute outage on 2026-07-30.
It is not over. Prometheus (metrics landed via #452) puts
cilium_bpf_map_pressure{map_name="cilium_policy_v3_*"} at 0.867 on all
three nodes right now, and max_over_time(...[30d]) at 1.03 — the map has
been driven past capacity. Loki has the overflow recurring as recently
as 2026-08-12 17:46Z, hitting authentik and esphome endpoints.
Three changes:
- bpf.policyMapMax 16384 (chart default) -> 65536, matching the cluster's
existing bpf-lb-map-max. Takes steady-state pressure from ~87% to ~22%.
The map is sized at creation, so this only takes effect as agents
restart.
- The chart range ">=1.19.0" is what let Flux take 1.19.6 -> 1.20.0
unattended 45 minutes before the first outage. Narrowed to
">=1.20.0 <1.21.0" so a CNI minor is a reviewed diff, not a surprise.
- A PrometheusRule on cilium_bpf_map_pressure: warning over 80% for 15m,
critical at 100%. The metric was already scraped but nothing alerted on
it, so the first signal was a downstream replica mismatch.
Not addressed: why the busiest endpoint needs ~14k entries. Only 178
CiliumIdentities exist and no CiliumNetworkPolicy declares more than 9
ports, so the entry count is not obviously explained by policy shape.
Establishing that needs `cilium-dbg bpf policy get` on an agent.
MERGING THIS ROLLS THE CNI. The DaemonSet uses
updateStrategy.rollingUpdate.maxUnavailable: 2, so two of three agents
restart at once.
Co-Authored-By: Claude Bot <claude-bot@renner.uno>
Verified against the deployed cluster: GET /wp-admin/ correctly 302s to
https://www.renner.uno/outpost.goauthentik.io/start?rd=... — and that URL
returned WordPress's 404 page, because /outpost.goauthentik.io fell through to
the public '/' prefix router.
The effect was that /wp-admin was unreachable rather than protected. An
attacker gains nothing, but neither does the editor the gate exists for.
paperless needs the same route and solves it with a separate Ingress on
auth.renner.uno (apps/authentik/paperless-gate-ingress.yaml). Here the whole
flow stays on www.renner.uno, so the path belongs in this rule set.
These endpoints are the login flow itself and are served by the outpost, so
routing them to it is not an authentication hole.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014giKN9N6e5J2DF8QZmVh98
Closes#461.
Five pipeline steps pinned ci-k8s at two stale tags: e2e-test.yml,
e2e.yml, alert-monitor.yml and issue-fix.yml at 2026-05-01, and
ci-manifests-test.yml at 2026-07-30. 2026-08-10 is the newest dated tag
in gitea_admin/ci-k8s and shares a digest with :latest
(sha256:0019f264...), so all five now run the same image the build
pipeline last produced.
A stale pin eventually points at a garbage-collected tag, and the split
had no deliberate reason behind it.
Co-Authored-By: Claude Bot <claude-bot@renner.uno>
The first deploy returned 500 on every request:
PHP Fatal error: Uncaught Error: Call to undefined function add_filter()
in /var/www/html/wp-config.php(128) : eval()'d code
WORDPRESS_CONFIG_EXTRA is eval'd inside wp-config.php, which runs long before
wp-settings.php loads the plugin API. add_filter() does not exist yet at that
point, so the call was fatal on every request.
Removing it exposed the second, worse half: the comment justified the filter by
claiming xmlrpc.php was 'blocked at the ingress'. It was not. The public router
matches '/' as a prefix, so xmlrpc.php was served like any other path — the
claim was written without being checked.
An Ingress has no deny verb, so xmlrpc.php now routes to the Authentik gate
alongside /wp-admin and /wp-login.php: anonymous callers meet Authentik instead
of the XML-RPC endpoint. Nothing on this site uses it — no Jetpack, no mobile
app, no pingbacks worth keeping.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014giKN9N6e5J2DF8QZmVh98
Addresses the automated review on #492.
Blocking: two comments claimed the public/admin split was kept honest by
kubernetes/apps/wordpress/network-policy.yaml. That file does not exist — the
comment was written against the paperless template and never updated once the
namespace policy proved sufficient. The deeper point in the review is the real
one: a paperless-style workload-scoped policy would be a no-op here, because
traefik must reach the pod directly for every public page. The split is
enforced by the Ingress path rules and Authentik, not at the network layer,
and the comment now says so — an auditor looking for a network control would
otherwise have gone hunting for a file that was never there.
Velero: the schedule excluded the database PVC by app.kubernetes.io/instance,
a label the mariadb-operator was only assumed to set. A wrong assumption there
fails silently and sweeps the live database volume into the snapshot. Inverted
to select the content PVC by labels this repo sets on it, the same direction
openbao-daily already uses.
The Service-name assumption flagged as a suggestion is kept: the CRD's separate
primaryService/secondaryService fields indicate the base Service carries the
resource name, and a mismatch fails loudly at pod startup. Written down as a
first-deploy check rather than left implicit.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014giKN9N6e5J2DF8QZmVh98
Migrates the Hetzner VM 'wordpress-hochzeit' into the cluster. The site is not
the frozen wedding archive it looks like: it carries an unpublished, fully
composed birth announcement from 2026-05-14, so wp-admin has to keep working
for a human author rather than being replaced by a Git workflow.
Split routing on one host: '/' goes straight to WordPress so the blog stays
publicly readable, while /wp-admin and /wp-login.php route through a dedicated
wordpress-gate outpost. The inverse -- gate the host and skip_path_regex the
public paths, as paperless-gate does -- would need a negative lookahead, and
the outpost's RE2 has none.
Gating all of /wp-admin is only safe because the dead wpgiftregistry plugin is
dropped in the migration: it was the sole emitter of ajaxurl on this site, and
of 121 admin-ajax hits in the current log window not one returned 200.
Core lives in the pinned image, not on the volume, so upgrading is a tag bump
in Git. Only wp-content is persisted.
Backups are split the same way CNPG/Barman and Velero are elsewhere: the
operator takes a logical dump to Hetzner Object Storage at 02:45, Velero takes
the wp-content PVC at 08:45 and skips the database volume -- a crash-consistent
snapshot of a running database is not a backup.
Group membership for the gate is owned by Git, as with the Home Assistant,
Shelly and zone-configurator gates. s.renner is the Authentik account for the
site's WordPress Editor, whose login there is still the pre-2019 s.birzer.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014giKN9N6e5J2DF8QZmVh98
WordPress speaks MySQL natively. The PostgreSQL route would mean pg4wp, an
SQL-rewriting shim whose README lists WordPress 6.5.3 as its newest tested
version while renner.uno runs 7.0.4 — every core update would become a
compatibility gamble.
Charts are OCI artifacts, so this follows the OCIRepository pattern from
spegel rather than the HelmRepository pattern used for CNPG. CRDs ship as a
separate chart that upstream requires first, hence the dependsOn. The version
range is capped at the year boundary: the project uses calendar versioning and
ships an upgrade guide with each minor.
renner-uno-k8s-mariadb carries the same 30d noncurrent-version expiry as the
CNPG and Velero buckets, matched to the Backup resource's maxRetention.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014giKN9N6e5J2DF8QZmVh98
The passkey apps were reachable only with a WebAuthn credential:
passkey-passwordless-authentication denies at its validation stage, and
passkey-stepup-authorization demands a passkey on every authorize. An
account with no passkey had no way in.
Branch both flows on enrollment with an expression policy,
passkey-user-has-webauthn. Enrolled accounts keep the mandatory passkey
at login and at every authorize. Accounts without one skip the WebAuthn
stage and get default-authentication-password followed by
default-authentication-mfa-validation — the same pair, in the same
order, that default-authentication-flow already runs, so the fallback is
not a weaker way in than auth.renner.uno's own login.
The policy runs against pending_user, so the branch follows the
identified account's enrollment and is not selectable by the requester.
Bindings keep evaluate_on_plan false and re_evaluate_policies true;
on-plan evaluation would run before a user is resolved.
The negated bindings carry failure_result: true. UserLoginStage defaults
a missing authentication backend to BACKEND_INBUILT rather than
refusing, so a flow that dropped both branches would log the user in on
a username alone. A PolicyException resolves to failure_result before
negate is applied, so a broken expression degrades to password + MFA
instead of to no factor.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Every fresh login to a passkey app costs two touches: one in
passkey-passwordless-authentication, a second immediately after in
passkey-stepup-authorization.
last_auth_threshold is enforced with a single browser cookie
(authentik_mfa) whose JWT is signed with, and carries, the validation
stage's PK. A stage only honours a cookie it wrote itself, and both
stages write to the same cookie name — so two stage objects each demand
their own touch and clobber each other's window.
Collapse them into one passkey-webauthn-validation stage bound into both
flows. not_configured_action is deny, since the authentication flow
reaches the stage with the user only identified and no password stage in
front of it. Passkey-less users enroll from user settings after a
password login; default-authenticator-webauthn-setup has a
configure_flow, so that path is live.
The 8h cookie now also covers the login flow, so a re-login in the same
browser inside the window is satisfied by the cookie alone.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
:latest never rolls. The tag moves when a build publishes, but nothing
tells the Deployment: the pod template is unchanged, so Kubernetes has
no reason to replace anything.
Nothing else covers it either. This image is deliberately not enrolled in
Flux image automation — kubernetes/infrastructure/image-automation/README.md
lists ghcr.io/konairius/ical-proxy as having "only main, latest, and
main-<sha> commit builds; no release tags", so no ImagePolicy watches it.
The two pods have been running a 21-day-old image while :latest moved
underneath them, and the only way to pick up a new build was a manual
restart, which leaves no record anywhere.
Pinning makes the rollout a git change. Flux applies the new pod
template, Kubernetes rolls it, and what is RUNNING becomes recoverable
from this repo instead of "whatever :latest meant the last time a pod
happened to restart".
main-99a912b is the merge of konairius/ical-proxy#12, which adds the
summary_match and summary_replace parameters. The waste calendar needs
them to strip "| Abfuhrkalender - Landkreis Amberg-Sulzbach" from every
collection — the feed repeats the whole calendar's name on each event,
and no consumer can shorten it after the fact.
Bumping this tag is now a manual, reviewed edit. Format is
main-<short-sha>, from docker/metadata-action type=sha with the branch
as prefix.
The renderer's init container writes /data/schedules.json ONCE, at pod
start, and nothing re-reads either source afterwards. So a ConfigMap or
Secret change lands in git, updates the object, and the running
renderer keeps the old values indefinitely.
The app re-reads schedules.json every 60 seconds, which makes it look
self-updating. It is not — it re-reads the FILE, and only the init
container writes the file.
This was hit three times in practice, each needing `kubectl delete pod`
by hand:
* switching the theme to Graphite E-ink Light — the pod kept
rendering with a theme name that no longer existed
* setting the schedule's lang field to "de"
* every re-mint of the BYOS tokens, which is the Secret half
The theme case is the instructive one: nothing errored. HA silently
served the default theme for a name that did not resolve, so the panel
just looked wrong, and I was about to debug the design.
Annotates both sources. Named per-resource rather than the blanket
reloader.stakater.com/auto: "true", matching terminus.yaml and
mosquitto-deployment.yaml.
Terminus got this annotation earlier; the renderer did not, despite
having the same init-container pattern and hitting the same failure in
the same session.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
lang was null, so the screenshot session rendered in English — and the
dashboard grew a German weekday array, a German month array and a
fifteen-entry weather-condition dict to translate around it by hand.
The field is documented as "UI language code (HA mode only)" and calls
Home Assistant's own _selectLanguage() on the page before capture;
upstream's tests use lang: 'de'. So localisation is HA's job and the
field was sitting in the schedule template, already written out, set to
null because I copied the shape without asking what it did.
Pairs with homeassistant#220, which deletes both hand-written mappings:
the weather badge points at weather.garten directly and the date is a
device_class: timestamp the frontend formats.
The instance stays language "en". This affects only the render session,
so the panel is German without changing anyone's UI.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The renderer stopped pushing and the panel preview froze. Every webhook:
HTTP 401: Unauthorized - This session has expired, please login again
Terminus has TWO independent expiries and the earlier fix only addressed
one. API_ACCESS_TOKEN_PERIOD governs the JWT's own lifetime and is now
10 years. SESSION_EXPIRATION_ENABLED / SESSION_INACTIVITY_LIMIT govern
the SESSION BEHIND that token and were left at their defaults, so a
valid, decade-long token stopped being accepted after about half an
hour of session inactivity.
Worth being precise, because the two look alike and are not: the first
failure was 400 "expired JWT access token", the token itself. This is
401 "This session has expired", the session. Different mechanism,
different error, same symptom — a panel that silently stops updating.
I noticed both expiries when diagnosing the first one, wrote that
Terminus "has two independent expiries", and then fixed one and moved
on. That is the actual mistake here, not the missing variable.
Disabling session expiry is the state the renderer's own code already
assumes ("stock Terminus disables session expiration"), which is false
by default and has to be made true here — the same shape as the token
period. And it is the deciding constraint for an unattended appliance:
a session that expires needs a human with a password to restore it, and
a hallway panel has neither.
Reloader will roll the pod; the ConfigMap annotation added earlier
covers this. Existing tokens must be re-minted afterwards — the current
session is already dead.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The renderer's own docs recommend Graphite by name — "Use e-ink theme
(Graphite recommended)", with theme=Graphite in the example — and the
Home Assistant community converges on it independently. The dashboard
now ships graphite-eink-light.yaml (homeassistant repo) in place of the
theme I hand-wrote from a spec sheet.
Pairs with homeassistant#216. The theme name must match the key inside
the vendored file exactly ("Graphite E-ink Light"); a name that does not
resolve fails silently — HA serves the default theme and the panel just
looks wrong rather than erroring.
Note upstream's example also passes `dark`. Not used here: the e-ink
LIGHT variant is the one that gives black-on-white, which is what an
e-paper panel wants. `dark: false` stays.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The setting was treated as an unverified assumption in review, and I
repeated that framing. It was not one.
Upstream's doc/configuration.adoc documents the variable and its
1800-second default in as many words, and this instance corroborated it
empirically: a token minted here was rejected roughly thirty minutes
later, which is the documented default behaving exactly as written.
Documentation plus matching observed behaviour is not an assumption.
The reviewer's uncertainty was reasonable — Terminus's source is not
vendored in this repo, so from the checkout alone the claim is
unsupported. The failing was mine for citing nothing at the point of
use, which is the same gap as the /health probe earlier: the evidence
existed and was not written where a reader could find it. Quotes the
documentation inline so the question is answerable from the manifest.
Note this does not make the post-merge check redundant. Whether Terminus
honours the variable is settled here; whether this ConfigMap edit
actually reached the running process via Reloader is a separate
question, and that is what decoding the new token's exp claim answers.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Review's remaining point: with API_ACCESS_TOKEN_PERIOD at 10 years,
nothing will ever expire the renderer's BYOS token or prompt anyone to
rotate it. Left undocumented, "never rotated" is indistinguishable from
"forgotten".
Records it where it is discoverable — the rotation directory itself,
whose purpose is that unrotated credentials are a visible choice rather
than an omission. Notes why there is no rotator: minting a Terminus JWT
requires the account password, which is precisely the secret this design
declined to hold in-cluster, so a rotator would have to store the thing
the long-lived token exists to avoid. Rotation is therefore manual, tied
to the Terminus account password changing.
Also flags that HA_ACCESS_TOKEN in the same OpenBao path is a different
case: secret-rotator already has an `ha-token` mode (home-assistant.yaml
uses it), so enrolling that one is a real follow-up rather than a
limitation, and doing so would leave only the BYOS pair unrotated.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Review caught that this PR, as it stood, would not have fixed the
outage it describes.
terminus-config is consumed via envFrom, and env vars are read once at
container start — Kubernetes does not hot-reload them. The ConfigMap is
a plain resource rather than a configMapGenerator, so editing it does
not change the pod template hash and Flux will not roll the pods
either. Stakater Reloader is deployed but acts only on annotated
workloads, and this Deployment carried no annotation.
Net effect would have been a silent no-op: git and the ConfigMap object
would show a 10-year token period while the running app kept issuing
30-minute tokens, and the re-mint step in the PR plan would have
produced another short-lived token that looked correct and expired
anyway. The manifest and reality would disagree with nothing to
indicate it.
Annotates for terminus-config specifically rather than the blanket
reloader.stakater.com/auto: "true", matching the reasoning already
recorded on mosquitto-deployment.yaml — enrolling anything further
stays a visible, reviewable edit to that line.
Verified Reloader is actually running (kube-system/reloader-reloader).
This also removes a manual step rather than documenting one, which is
the point: a fix that needs a human to remember `kubectl rollout
restart` is not deployed, it is a runbook entry waiting to be missed.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The renderer renders correctly and pushes nothing. Every webhook is
rejected:
[webhook] Webhook failed: 400 {"error":"expired JWT access token"}
[webhook] BYOS auth: refresh failed (400) {"error":"expired JWT ..."}
Terminus issues API JWTs with API_ACCESS_TOKEN_PERIOD, default 1800s.
Minting a replacement via POST /api/jwt requires a still-VALID access
token in the Authorization header, so an expired token cannot refresh
itself — the second line above is the refresh attempt being rejected by
the very expiry it was trying to repair. There is no recovery path once
the window closes.
That makes "mint once, store in OpenBao" unworkable for an unattended
appliance, which is what this stack is. The renderer's own code assumes
"stock Terminus disables session expiration and issues effectively
permanent tokens"; that is not true of this deployment. Rather than work
around the assumption in the client, this makes it true: sets
API_ACCESS_TOKEN_PERIOD to 10 years.
The trade is deliberate. A long-lived JWT with full Terminus API rights
now sits in OpenBao. The alternative was putting the Terminus account
PASSWORD into the cluster so an init container could mint a short-lived
token on every pod start — a strictly worse secret to hold, for a
LAN-only service whose token is revocable by rotating the account.
Also corrects the obtained_at comment on the renderer, which justified
stamping "now" by repeating that same false permanence assumption.
Stamping now is safe ONLY because of this setting; against the 30-minute
default it is actively harmful, because the app would believe a stale
token had a fresh window, skip its proactive refresh, and strand itself.
The comment now says so, and says what to do if this setting is reverted.
The period is fixed at mint time, so this does not revive the existing
tokens — they must be re-minted after it deploys.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Follow-up to the HOME=/tmp fix in this PR, from review.
Pointing HOME at /tmp was correct but left it on the container's
writable layer, which was harmless while Chromium crashed on launch and
wrote nothing. With the browser actually starting once a minute for the
life of the pod, crashpad state and profile data now accumulate there
with nothing to bound them — resources.limits sets memory only, so
there is no ephemeral-storage ceiling to catch it either.
Backs it with an emptyDir at a 512Mi sizeLimit, matching the /tmp mount
convention already used in pve-exporter-deployment.yaml. The point of
the limit is the failure mode, not the size: unbounded it degrades into
node disk pressure, which surfaces far from this pod and hurts whatever
else lands on that node; bounded it is an eviction of the renderer,
attributable on sight.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Two runtime faults from the first deploy. Neither is visible statically
— both needed the pod running to find.
1. The browser never launched. Every render died with
chrome_crashpad_handler: --database is required
Chromium cannot start without a writable HOME: crashpad builds its
database path from it. Diagnosed on the pod rather than guessed —
HOME=/, uid=1000, / is root-owned 0755 and not writable, /tmp is.
The cause is OUR securityContext, not the image: forcing
runAsUser 1000 with no matching passwd entry makes HOME fall back
to "/". Sets HOME=/tmp; crash dumps are throwaway, so they do not
belong on the PVC.
Worth being precise about, because review had flagged the dropped
capabilities as the likely Chromium risk and the comment I added
said they were fine. The capabilities were fine. Something adjacent
to that securityContext broke it anyway, and the comment now says
to check HOME before loosening the capability block.
2. Even once the browser works, nothing would have been pushed. The
scheduler logged
BYOS tokens ... expired beyond the refresh window
and skipped the webhook entirely. It derives token age from
obtained_at, and the template shipped a literal 0, so
freshly-minted tokens read as dating from 1970. The init container
now stamps it with jq's `now * 1000 | floor` at write time.
Verified the filter produces a 13-digit epoch-ms value. Stock
Terminus disables session expiry and issues effectively permanent
tokens, so a write-time stamp is honest enough.
Failure mode of the pair was quiet in the way this stack keeps being
quiet: pod Running and Ready, /health passing, schedule firing once a
minute, zero screens reaching Terminus.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Both were verified against the upstream image while writing this, but
the evidence never made it into the manifest, so review flagged them as
unverified assumptions. Fair — the reasoning was invisible.
/health is not a guess: the image's own Dockerfile declares
`HEALTHCHECK ... curl -f http://localhost:10000/health`, so the route is
part of its published contract. That is the difference from
terminus.yaml, which got TCP-only probes precisely because Terminus
publishes no health endpoint.
Dropping ALL capabilities is safe despite the container running headless
Chromium because the app launches it with --no-sandbox
--disable-setuid-sandbox --no-zygote --disable-dev-shm-usage, baked into
its own PUPPETEER_ARGS. That last flag is also why no /dev/shm emptyDir
is mounted. Both hold only for the pinned tag, so the comment says to
re-check on a bump.
No behaviour change.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Review caught a blocking bug, correctly. HOME_ASSISTANT_URL pointed at
http://ha.renner.uno:8123, which is unusable from inside a pod.
That hostname is served by the home-assistant-bgp LoadBalancer with
externalTrafficPolicy: Local, advertised to the LAN over BGP. It is
not backed by an Ingress, so CoreDNS's k8s_gateway delegation does not
intercept it — a pod resolving it gets the real external address
(10.2.99.87) and hairpins off the LB.
This cluster has hit precisely this before with precisely this
Service. kubernetes/infrastructure/openbao/rotation/home-assistant.yaml
reaches HA from a pod for token rotation and says so outright: "The
public name is unusable from a pod (ingress-LB hairpin)." The same
language recurs in the gitea and woodpecker network policies. I took
the hostname from the repo's own "internal http://ha.renner.uno:8123"
note, which is true for a workstation and false from a pod.
Now uses home-assistant-bgp.home-assistant.svc.cluster.local:8123,
verified to exist with ClusterIP 10.96.79.213 on 8123/TCP.
Fixing the URL alone was not enough. The home-assistant namespace's
default-deny-ingress had no rule admitting trmnl pods on 8123 — the
only 8123 rule is scoped to the openbao secret-rotator — so traffic
would still have been dropped. Adds a companion ingress rule modelled
on the rotator's, scoped to the renderer's pod label rather than the
whole trmnl namespace, since Terminus shares that namespace and has no
business reaching Home Assistant. Only the ingress half is needed:
trmnl has no default-deny egress selecting the renderer, unlike
openbao.
Worth naming the failure mode, because it is the fourth "fails
quietly" case in this stack: nothing crashes. The schedule fires every
minute, each render errors on connect, and the panel simply never
updates.
Also updates the trmnl-daily Velero comment, which enumerated PVCs and
so undersold itself once trmnl-renderer-data existed — the schedule
selects the namespace minus CNPG-labelled PVCs, so new PVCs are
already covered without editing it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Resolves the one field flagged as unverified on the renderer PR, now
that a Terminus API token exists to check it with.
GET /api/screens on the running instance returns model_id as a NUMBER
(an existing welcome screen carries model_id 11), and GET /api/models
gives TRMNL X as id 1, name "v2", 1872x1404, 16 colours. Upstream's
example value "og_1bit" matches no model on this server at all — the
2-bit OG model here is id 11, name "og_plus" — so that example was
illustrative rather than a real identifier.
Would have surfaced as Terminus rejecting every pushed screen with a
422, i.e. a permanently blank panel with the renderer looking healthy.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Phase 4. Screenshots the Home Assistant e-ink dashboard, dithers it to
16 greys and hands it to Terminus, which the panel then polls.
Upstream ships this as a Home Assistant add-on. Ours is a plain HA
container with no Supervisor, so it runs standalone — viable because
the app prefers HOME_ASSISTANT_URL/ACCESS_TOKEN env vars over
/data/options.json and authenticates with an ordinary long-lived
token. SUPERVISOR_TOKEN is deliberately left unset: it only flips an
internal isAddOn flag and would switch the app to add-on behaviour.
The non-obvious part is the direction of travel. With the byos-hanami
webhook in `uri` delivery mode the renderer does NOT push image bytes
— it POSTs a URL pointing at its own /output/<file> endpoint and
TERMINUS FETCHES THE IMAGE BACK. That is why this lives in the trmnl
namespace: the fetch is intra-namespace and already permitted by
default-deny-ingress. Splitting the two across namespaces would have
needed a new policy for a dependency that is easy to miss.
Fully declarative, no clicks. Schedules are a JSON file at
/data/schedules.json which the app re-reads every 60s, so the whole
schedule — viewport 1872x1404, floyd-steinberg at bitDepth 4, the
trmnl-eink theme, the dashboard path — is reviewable in git rather
than typed into the app's web UI. An init container splices the BYOS
tokens into the ConfigMap template with jq; jq rather than sed because
the tokens are JWTs going into a JSON string and sed would corrupt on
any character it treats as special (verified with a token containing
/ + &).
No HTTP in the init container on purpose. The app exposes a
/api/byos/login proxy that trades a Terminus username+password for
these tokens, but using it would mean shipping the Terminus PASSWORD
into the cluster and making every pod start depend on a network call.
Stock Terminus disables session expiry and issues effectively
permanent tokens, so they are minted once out of band and kept in
OpenBao; the password never enters the cluster.
Three things that are load-bearing and would fail quietly otherwise:
* The PVC at /data is REQUIRED. The app picks its data directory by
testing whether /data exists — with nothing mounted it silently
falls back to /app/data in the container, so schedules and rendered
output vanish on restart and the panel goes blank.
* The Service is ClusterIP with NO Ingress. The app's web UI on this
port has no authentication whatsoever, per upstream, so it must not
be routable from the LAN.
* The memory limit is 2Gi, not the 512Mi upstream's troubleshooting
note suggests. The app's own watchdog restarts it past 900MB but
only measures its OWN rss — Chromium is a separate process, and it
is rendering a 1872x1404 page.
The image is arch-suffixed (trmnl-ha-amd64); upstream publishes no
multi-arch manifest. Pinned and not enrolled in image automation,
since a bad bump here surfaces as a corrupted or blank panel rather
than a failed rollout — rationale recorded in the image-automation
README alongside Terminus's.
PREREQUISITE: homelab/apps/trmnl/renderer must be seeded in OpenBao
with HA_ACCESS_TOKEN, BYOS_ACCESS_TOKEN and BYOS_REFRESH_TOKEN before
this merges, or the ExternalSecret never syncs, the init container
blocks, and the trmnl Kustomization fails its wait.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Two things the first reconcile surfaced.
Cilium IPAM allocated 10.2.99.0 for the device LoadBalancer. Nothing
requested it — the Service carried no lbipam.cilium.io/ips annotation, so
IPAM handed out the first free address in the pool block, which is the base
address of the 10.2.99.0-10.2.99.255 range. Each LB address is advertised
to the UDM as its own BGP route, so it is routable in principle, but a .0
host address is exactly the sort of thing constrained embedded IP stacks
get wrong, and the TRMNL firmware is the one client that has to work here.
Requesting .89 explicitly also brings this in line with every other LB
Service in the repo, all of which pin their address, and matches the
fd99::89 IPAM had already chosen for v6.
Omitting the annotation was my call on the original PR, on the reasoning
that the device is provisioned with a hostname so the address could move
freely. That reasoning still holds; it just is not worth spending it on an
address nobody picked.
Second, the sidekiq container exits 1 once on a fresh deploy with
`PG::UndefinedTable: relation "account" does not exist` — it loses the race
against the web container's migration, then comes up healthy on the
restart. Observed on the first deploy, converged in about a second. There
is no upstream ordering hook, and gating it behind an initContainer that
probes for a named table would couple us to Terminus's schema, so this is
left to Kubernetes' restart deliberately. Documented in place so the next
person reading `RESTARTS 1` can tell the benign case from a real one.
Verified on the live cluster before this commit: Kustomization Ready, tr-pg
"Cluster in healthy state" on PostgreSQL 18, both ExternalSecrets
SecretSynced, terminus and valkey Running.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Phase 1 of the TRMNL X dashboard plan: stand up the self-hosted Terminus
(BYOS) server the panel will poll. The Home Assistant dashboard, the e-ink
theme and the screenshot renderer are later phases and are not in here.
Phase 0 verification, all confirmed against upstream before writing any of
this:
* TRMNL X IS a first-class model in Terminus (id v2 / label "TRMNL X",
1872x1404, 16 colours, 4-bit) — the stop-and-report condition in the
plan does not trigger. Note it is NOT in config/db/seeds.rb: the model
list is populated by the MODEL_SYNCHRONIZER job pulling trmnl.com, so
the Models list is empty until that job has run once.
* The HA add-on can run standalone. Our HA is plain HA Core, not
Supervised, but the add-on reads env vars in preference to
/data/options.json and authenticates with an ordinary long-lived
token — SUPERVISOR_TOKEN only flips an isAddOn boolean. So the
fallback path in the plan (upstream container, not add-on) is viable.
That deployment lands with Phase 4.
Deviations from the repo's house patterns, each deliberate:
* tr-pg runs PostgreSQL 18, not the standard 16. Terminus ships a
committed config/db/structure.sql containing `SET transaction_timeout
= 0;`, a GUC that does not exist before PG 17, so schema load against
a 16 server fails outright. This is the first non-16 CNPG cluster
here. The existing 16 pin is inherited from 739a67e9 (Apr 2026) and
has no documented rationale.
* The device endpoint is cleartext HTTP on a Cilium BGP LoadBalancer
(trmnl-device.renner.uno) rather than an Ingress. The firmware cannot
be given the internal CA, and a TLS-less Ingress would be a new
pattern for this repo — a dedicated LB address is not. The admin UI
keeps a normal TLS Ingress at trmnl.renner.uno; both front the same
Service. Same split as home.renner.uno / ha.renner.uno.
* ghcr.io/usetrmnl/terminus is NOT enrolled in image automation despite
publishing a usable tag stream. It serves the firmware and
/api/display contract to a wall-mounted device, upstream is pre-1.0
with no releases or changelog, and an unattended bump that breaks
either leaves the panel dark. Bumps are manual and reviewed. The
Valkey sidecar is enrolled — it touches no device-facing contract.
* Egress is an FQDN allowlist (trmnl.com, plus the S3 host that serves
firmware binaries), not toEntities: world. The S3 host is returned by
the API at request time rather than being a source constant, so it can
drift; the policy comment says where to look when firmware sync
starts failing. This also means Terminus's Extensions/Poll feature,
which fetches admin-configured URLs, will not work — accepted, since
screen content is pushed in by the renderer.
* The CNPG pods are deliberately left OUT of that egress policy so the
barman WAL archive path is not behind a rule that fails closed.
Images verified to exist in their registries before pinning:
ghcr.io/usetrmnl/terminus:0.68.0, valkey/valkey:9.1-alpine,
ghcr.io/cloudnative-pg/postgresql:18.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Prometheus and Loki run in Kubernetes -- statefulsets
prometheus-kube-prometheus-stack-prometheus and the Loki release, both up 93
days. The standalone VMs these plays targeted are gone: neither
prometheus.srv.renner.uno nor loki.srv.renner.uno resolves at all, and the
proxmox_logging group install-log-aggregation.yml targets is not in the
inventory.
So these rendered scrape configs, exporter installs and log shippers for
hosts that do not exist. Removed:
plays/install-prometheus.yml -> prometheus.srv.renner.uno (gone)
plays/install-blackbox-exporter.yml -> prometheus.srv.renner.uno (gone)
plays/install-loki.yml -> loki.srv.renner.uno (gone)
plays/install-log-aggregation.yml -> proxmox_logging (no such group)
roles/prometheus-server, snmp-exporter, pve-exporter, unifi-poller,
roles/blackbox-exporter, loki-server, promtail
Each role was consumed only by the plays above; promtail was referenced by
nothing at all. Verified no dangling references remain.
plays/update.yml imported install-log-aggregation.yml, so deleting it alone
would have broken the fleet update play. That import is removed and
update.yml re-syntax-checked.
This also retires #473, which changed IPv4 literals to FQDNs in
prometheus.yml.j2 and nodes.yml.j2. That was a change to a template nothing
renders. Its PR body described the instance-label consequences for
dashboards and alert rules, which was fiction -- no dashboard reads those
labels. When it would not apply I reported it as blocked on Proxmox API
credentials; the actual reason was that the target host had not existed for
months, and `--list-hosts` returning 0 was the evidence I misread.
Worth checking separately, not assumed here: whether anything scrapes the
PVE node_exporter and chrony_exporter today. install-node-exporter-pve.yml
still installs them on pve_cluster, but the config that pointed a Prometheus
at them was in the templates just deleted. If that was the only reference,
those metrics have been dark since the VM went away -- and the FQDN change
in #473 would have masked the question rather than raising it.
Co-Authored-By: Claude Bot <claude-bot@renner.uno>
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The image shipped without [unix_http_server], [rpcinterface:supervisor] or
[supervisorctl], so supervisorctl could not connect:
Error: .ini file does not include supervisorctl section
That means no way to query or restart an individual service inside the
container -- docker logs was the only introspection. Per-service lifecycle
management was the whole argument for running a supervisor instead of one
process per container, and the first revision did not actually deliver it.
Unix socket only, inside the container. Nothing outside needs it, and this
container runs with host networking, so a TCP listener would be exposed on
the host.
The build-time self-test now asserts the section exists and supervisorctl
runs, so this cannot regress silently the way it shipped.
NOT fixed here, because my diagnosis was wrong: the repeated
"mqtt broker disconnected. reason_code = Unspecified error" is not a client
ID collision. E3onCAN has no -mcid option at all -- verified against the
pinned source -- and generates its own ID; the native broker log showed
E3onCANclient.py-e380-7f847281 alongside open3e-edge, so the two never
collided. I nearly "fixed" it by passing a flag that does not exist.
Telemetry is flowing (each reconnect succeeds), so this is churn rather than
an outage, but the cause is still unidentified. The next step is the broker's
own log on edge-1 -- mosquitto records the disconnect reason, which the
client side reports only as "Unspecified error".
Co-Authored-By: Claude Bot <claude-bot@renner.uno>
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The migration did not stop anything. It ran stop + disable + mask in one
call with failed_when: false, then deleted the unit files. Masking a unit
whose file still exists conflicts, so the call failed, failed_when hid the
failure, nothing was stopped -- and the next task deleted the unit files out
from under two running processes.
That left systemctl is-enabled reporting "not-found", which looks clean,
while is-active still said "active". I reported the cutover successful on
the strength of the former.
On 2026-08-10 the result was two open3e instances issuing UDS requests on
the same CAN bus from 19:28 to 19:37, taking over each other's
open3e-edge MQTT session -- the exact failure the block's own comment said
it existed to prevent.
Fixed in three parts:
- Stop and disable FIRST, and do not swallow the result. Only units that
actually exist are touched (stat first), so a fresh host does not need
an error hidden to get through.
- No masking. It writes a symlink at the same path the next task removes,
so the two cancel out. With the unit files gone there is nothing to
start.
- Assert the invariant that actually matters -- no native process on the
CAN bus -- rather than inferring it from systemd reporting success.
pgrep, then fail loudly with the surviving command lines and why it
matters.
Verified against the live host: ok=15 changed=1 failed=0, the assert passing
with "No native CAN processes remain; safe to start the container", and the
run now idempotent (the single change is the compose up, not the teardown).
Co-Authored-By: Claude Bot <claude-bot@renner.uno>
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
printf '%s\n\n' "Fingerprints the alert-monitor triage agent classified as noise. The dedup step skips any alert whose fingerprint appears below — delete a line to make that alert eligible for triage again. Keep this issue open; it is the suppression state." > /tmp/noise-header.txt
printf '%s\n\n' "Fingerprints the alert-monitor triage agent classified as noise. The dedup step skips any alert whose fingerprint appears below — delete a line to make that alert eligible for triage again. Keep this issue open; it is the suppression state. Entries EXPIRE after NOISE_TTL_DAYS (default 30) counted from the date in the line, so a one-off blip stops suppressing its alertname+scope pair once the window passes; re-add happens automatically if it is triaged as noise again. Only lines in the exact '- <fingerprint> <ALERTNAME> — <YYYY-MM-DD>: <reason>' form suppress anything — a fingerprint mentioned in prose does not." > /tmp/noise-header.txt
summary:"Ceph health check {{ $labels.name }} active for 6h"
description:"Ceph health check {{ $labels.name }} has been active for six hours. Only AUTH_INSECURE_* is excluded (kernel-blocked, see #527). BLUESTORE_SLOW_OP_ALERT is sticky for 24h after the last stall and clears itself: check whether the stall fell inside the monthly Velero restore-test window (08:00-14:00Z on the 1st), which is expected on these QLC drives — one outside that window, or a repeat on the same OSD, means check that drive (#557). Detail: `kubectl -n rook-ceph exec deploy/rook-ceph-tools -- ceph health detail`."
- alert:CephPoolLostRedundancy
# Names the pool, which POOL_NO_REDUNDANCY does not.
#
# There is no pool-size metric, but bytes_used/stored IS the
# replication factor. The >1e6 floor drops pools too small to measure
# meaningfully, empty ones included.
#
# No pool is exempt.
expr:|
ceph_pool_bytes_used / ceph_pool_stored < 1.5 and ceph_pool_stored > 1e6
for:30m
labels:
severity:critical
annotations:
summary:"Ceph pool {{ $labels.pool_id }} is running unreplicated"
description:"Pool {{ $labels.pool_id }} has a replication factor below 1.5, meaning a single OSD loss destroys data. No pool is meant to be unreplicated — an unreplicated pool also blocks ALL OSD maintenance cluster-wide, since `ceph osd ok-to-stop` refuses while its PGs would go offline. Check with `kubectl -n rook-ceph exec deploy/rook-ceph-tools -- ceph osd pool ls detail`."
- alert:CephHealthError
# HEALTH_ERR means data availability or redundancy is at risk.
expr:ceph_health_status == 2
for:5m
labels:
severity:critical
annotations:
summary:"Ceph is HEALTH_ERR"
description:"The Ceph cluster is in HEALTH_ERR — availability or redundancy is at risk. Inspect immediately with `kubectl -n rook-ceph exec deploy/rook-ceph-tools -- ceph health detail` and `ceph osd df tree`."
- alert:CephMonDiskLow
# Named explicitly rather than left to CephHealthWarn, because the
# mons sit on the node's /var alongside container storage: this
# fires for a full node, not for Ceph growth. The mon's own data is
# ~106 MB, so 30% of a 60 GB shared filesystem says nothing about
# Ceph.
# Image GC does not clear this — measured on k8s-2, the reclaimable
# content store is a small fraction of /var/lib/containerd next to
# ~20 GB of overlayfs snapshots held by running containers. Look at
# what actually grew before reaching for a threshold.
description:"/var on {{ $labels.instance }} is under 30% free, which is Ceph's mon_data_avail_warn threshold, so the mon on this node will report MON_DISK_LOW. Find the actual consumer with `talosctl -n <node> usage /var/lib --depth 1` and then `/var/lib/containerd --depth 1` — note that overlayfs snapshots belong to running containers and are not reclaimable by image GC."
# kube-prometheus-stack's Prometheus resource selects on this label;
# without it the rule is created but never loaded into Prometheus.
release:kube-prometheus-stack
spec:
groups:
- name:cilium.rules
# Both alerts are map-agnostic on purpose. cilium_bpf_map_pressure is
# emitted per map type — policy, conntrack, NAT, LB — distinguished by
# the map_name label, and running out of any of them degrades the
# datapath. The policy map is merely the one that has bitten us.
# Cilium only exports the metric for maps above
# policyMapPressureMetricsThreshold (chart default 0.1), so quiet maps
# produce no series rather than a flood of near-zero ones.
rules:
- alert:CiliumBPFMapPressureHigh
# cilium_bpf_map_pressure is used/capacity for the fullest map of
# that name on the agent. A full map is not a slow path — it is a
# hard failure: the agent cannot program the datapath, so endpoint
# regeneration fails and every new pod on the node hangs in sandbox
# creation until something frees space.
expr:cilium_bpf_map_pressure > 0.8
for:15m
labels:
severity:warning
annotations:
summary:"Cilium BPF map {{ $labels.map_name }} is {{ $value | humanizePercentage }} full on {{ $labels.node }}"
description:"The BPF map {{ $labels.map_name }} on node {{ $labels.node }} has been over 80% full for 15 minutes. At 100% the Cilium agent can no longer program the datapath and new pods on this node fail sandbox creation. Raise the corresponding size in kubernetes/infrastructure/cilium/helmrelease.yaml (values.bpf) — the map is sized at creation, so the change needs an agent restart."
- alert:CiliumBPFMapFull
# Pressure reaches (and can exceed) 1.0 when the agent wants more
# entries than the map holds. Pods are already failing to start.
expr:cilium_bpf_map_pressure >= 1
for:0m
labels:
severity:critical
annotations:
summary:"Cilium BPF map {{ $labels.map_name }} is full on {{ $labels.node }}"
description:"The BPF map {{ $labels.map_name }} on node {{ $labels.node }} is at or over capacity. Endpoint regeneration is failing with 'no space left on device' and pods scheduled to this node will hang in ContainerCreating. Check `{namespace=\"kube-system\",pod=~\"cilium-.+\"} |= \"no space left on device\"` in Loki for the affected endpoints."
summary:"CNPG WAL archiving is falling behind on {{ $labels.namespace }}/{{ $labels.pod }}"
description:"{{ $value }} WAL segments have been waiting to archive for over 30 minutes. Point-in-time recovery is broken for anything after the last archived segment, and pg_wal will grow until the PVC fills. Check the barman-cloud sidecar logs and the ObjectStore credentials: `kubectl -n {{ $labels.namespace }} logs {{ $labels.pod }} -c plugin-barman-cloud`."
- alert:CNPGBackupFailed
# cnpg_collector_last_failed_backup_timestamp is a unix timestamp, 0
# when no failure is recorded. Guard on > 0 so the epoch-zero default
summary:"CNPG backup failed in the last 24h on {{ $labels.namespace }}/{{ $labels.pod }}"
description:"A base backup for {{ $labels.namespace }}/{{ $labels.pod }} failed within the last 24 hours. Verify what is actually in the bucket rather than trusting CR status — see the barman-cloud-backup-list recipe in kubernetes/apps/home-assistant/MIGRATION-recorder-postgres.md."
# DELIBERATELY ABSENT: a backup-age alert, which is the one you would
summary:"WordPress MariaDB backup has not succeeded in 26h+"
description:"The wordpress-mariadb-backup CronJob's last successful run is over 26 hours old. Check the newest Job's pod logs in the wordpress namespace: `kubectl -n wordpress get jobs`. The 2026-08-19 failure was `The specified bucket does not exist.` against renner-uno-k8s-mariadb while the endpoint itself probed healthy, so a green HetznerBackupEndpointDown does not clear this."
- alert:WordpressMariadbBackupNeverRan
# The staleness expression above goes blind when the metric is
# absent, which is what happens once the operator recreates the
# CronJob. Without this guard "never backed up" is quieter than
summary:"WordPress MariaDB backup has no recorded successful run"
description:"The wordpress-mariadb-backup CronJob exists but has no lastSuccessfulTime: either it has not completed once since the Backup CR was recreated, or every run since has failed. Check `kubectl -n wordpress get jobs` and that the hetzner-s3-creds ExternalSecret is synced."
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
claude-botandClaude Opus 5
k.renner
security-bot
issue-fix-bot