feat(paperless): upgrade to v3.1.2 (image policy 2.x -> 3.x)

paperless-ngx released 3.0.0 on 2026-07-22; the ImagePolicy was deliberately gated at semver 2.x, so the deployment stayed on 2.20.15 while upstream moved to 3.1.2. No 2.x release has appeared since 3.0.0, so the gate now holds the deployment on a branch that receives no patches. Preflight for the major bump, against docs/migration-v3.md: - 2.20.15 is the only valid source version, and it is enforced rather than advised: src/paperless/checks.py raises paperless.E002 unless the documents app has 1075_workflowaction_order applied, and init-migrations runs `manage.py check --tag compatibility` before migrate. We are on 2.20.15 exactly, so there is no intermediate hop. - CONSUMER_POLLING is renamed to CONSUMER_POLLING_INTERVAL. Renamed here; the 10s value and the CephFS-inotify reason for it are unchanged. - CONSUMER_BARCODE_SCANNER is removed — pyzbar is gone and zxing-cpp is the only backend. We set ZXING, which is what remains, so dropping the variable keeps current behaviour. - SECRET_KEY becomes mandatory. Already set from the paperless-secrets Secret. - DBENGINE becomes required rather than inferred, and must read `postgresql`, not `postgres` — a distinction 3.0.1 shipped a fix for. Already `postgresql`. - v3 stops rejecting duplicates by default; CONSUMER_DELETE_DUPLICATES=true preserves the current behaviour and is already set. - Nothing else in the removed set applies: no encrypted documents, no pre- or post-consume scripts, no OCR_MODE or OCR_SKIP_ARCHIVE_FILE, no CONSUMER_IGNORE_PATTERNS relying on fnmatch, no CONSUMER_INOTIFY_DELAY. Tika and Gotenberg settings are unchanged in 3.x, as are the remote-user auth variables Authentik depends on. - API v1 is gone and the minimum is version 9. No consumer in this repo uses the API: docs.renner.uno is a Traefik redirect to paperless.renner.uno, Gatus probes the URL root, and Authentik holds only proxy-provider config. - PostgreSQL 16 clears the documented minimum of 14. Redis has no documented minimum; 8.10.1 is current. A startupProbe is added because the first 3.x boot is long. s6 makes svc-webserver depend on init-migrations and init-search-index, so nothing is served until both finish, and on this boot they are the SHA256 checksum backfill — which opens and reads every original and every archive file — and a full Tantivy index build, because the Whoosh index cannot be converted. Against the existing probes alone the pod would be killed 210s in, part-way through a migration, and the next boot would start over. This upgrade is one way. The 3.x tree squashes the entire pre-3.0 migration history into 0001_squashed and deletes the individual files, the checksum migration's reverse is RunPython.noop so the SHA256 values would survive a schema reversal that 2.x cannot read, and task history is dropped outright. Upstream states none of this as policy, but rollback should be treated as restore-from-backup and redeploy 2.20.15, not a tag revert against a migrated database. Policy gate moves to 3.x; a 4.x cutover needs manual review again. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Merge pull request 'fix(llama-gate): name the authentication flow, as Audiobookshelf does' (#737 ) from llama-gate-flow into master
2026-09-02 06:49:52 +02:00 · 2026-09-01 19:54:16 +00:00 · 2026-09-01 21:52:54 +02:00 · 2026-09-01 19:44:15 +00:00 · 2026-09-01 21:41:08 +02:00 · 2026-09-01 19:22:17 +00:00
138 changed files with 3927 additions and 6322 deletions
@@ -32,13 +32,13 @@
 #              mechanism as update-audit.yml):
 #                woodpecker repo cron add --repo k.renner/homelab \
 #                  --name alert-monitor --branch master --schedule '*/15 * * * *'
-#   - manual : woodpecker pipeline create --branch master \
-#                --var PIPELINE=alert-monitor k.renner/homelab
+#   - deploy : woodpecker-cli pipeline deploy k.renner/homelab <n> alert-monitor
+#              where <n> is an existing pipeline to promote.
 when:
  - event: cron
    cron: alert-monitor
-  - event: manual
-    evaluate: 'PIPELINE == "alert-monitor"'
+  - event: deployment
+    evaluate: 'CI_PIPELINE_DEPLOY_TARGET == "alert-monitor"'

 steps:
  - name: fetch-alerts
@@ -101,7 +101,7 @@ steps:
        bash scripts/ci/make-diag-kubeconfig.sh

  - name: alert-triage-agent
-    image: gitea.renner.uno/gitea_admin/ci-claude:2.1.247
+    image: gitea.renner.uno/gitea_admin/ci-claude:2.1.250
    environment:
      CLAUDE_CODE_OAUTH_TOKEN:
        from_secret: claude_code_oauth_token
@@ -31,8 +31,8 @@ when:
      - "ci/images/**"
      - "secret-rotator/**"
      - ".woodpecker/build-ci-images.yml"
-  - event: manual
-    evaluate: 'PIPELINE == "build-ci-images"'
+  - event: deployment
+    evaluate: 'CI_PIPELINE_DEPLOY_TARGET == "build-ci-images"'

 steps:
  - name: build-ansible
@@ -44,7 +44,7 @@ steps:
    # secret-rotator commit needlessly rebuilt all four ~1.3G ci-* images and
    # orphaned ~5G of registry layers per run — a main driver of #336.
    when:
-      - event: manual
+      - event: deployment
      - event: push
        path: ["ci/images/ansible/**", ".woodpecker/build-ci-images.yml"]
    environment:
@@ -68,7 +68,7 @@ steps:
    directory: ci/images/k8s
    depends_on: []
    when:
-      - event: manual
+      - event: deployment
      - event: push
        path: ["ci/images/k8s/**", ".woodpecker/build-ci-images.yml"]
    environment:
@@ -92,7 +92,7 @@ steps:
    directory: ci/images/tofu
    depends_on: []
    when:
-      - event: manual
+      - event: deployment
      - event: push
        path: ["ci/images/tofu/**", ".woodpecker/build-ci-images.yml"]
    environment:
@@ -123,7 +123,7 @@ steps:
    directory: secret-rotator
    depends_on: []
    when:
-      - event: manual
+      - event: deployment
      - event: push
        path: ["secret-rotator/**", ".woodpecker/build-ci-images.yml"]
    environment:
@@ -152,7 +152,7 @@ steps:
    directory: ci/images/alpine-jq
    depends_on: []
    when:
-      - event: manual
+      - event: deployment
      - event: push
        path: ["ci/images/alpine-jq/**", ".woodpecker/build-ci-images.yml"]
    environment:
@@ -181,7 +181,7 @@ steps:
    directory: ci/images/cni-plugins
    depends_on: []
    when:
-      - event: manual
+      - event: deployment
      - event: push
        path: ["ci/images/cni-plugins/**", ".woodpecker/build-ci-images.yml"]
    environment:
@@ -210,7 +210,7 @@ steps:
    directory: ci/images/alpine-openssl
    depends_on: []
    when:
-      - event: manual
+      - event: deployment
      - event: push
        path: ["ci/images/alpine-openssl/**", ".woodpecker/build-ci-images.yml"]
    environment:
@@ -239,7 +239,7 @@ steps:
    directory: ci/images/heating-can
    depends_on: []
    when:
-      - event: manual
+      - event: deployment
      - event: push
        path: ["ci/images/heating-can/**", ".woodpecker/build-ci-images.yml"]
    environment:
@@ -54,8 +54,8 @@
 #
 # Triggering:
 #   - cron   : the cron NAMED exactly "ci-claude-refresh" (see above).
-#   - manual : woodpecker pipeline create --branch master \
-#                --var PIPELINE=ci-claude-refresh k.renner/homelab
+#   - deploy : woodpecker-cli pipeline deploy k.renner/homelab <n> ci-claude-refresh
+#              where <n> is an existing pipeline to promote.
 #   - push   : a change to the Containerfile (or this file) ON master forces a
 #              rebuild of the current latest version so Containerfile fixes ship
 #              promptly. Restricted to master ON PURPOSE — a feature branch must
@@ -65,8 +65,8 @@
 when:
  - event: cron
    cron: ci-claude-refresh
-  - event: manual
-    evaluate: 'PIPELINE == "ci-claude-refresh"'
+  - event: deployment
+    evaluate: 'CI_PIPELINE_DEPLOY_TARGET == "ci-claude-refresh"'
  - event: push
    branch: master
    path:
@@ -17,6 +17,6 @@ when:

 steps:
  - name: model-selection-tests
-    image: gitea.renner.uno/gitea_admin/ci-claude:2.1.247
+    image: gitea.renner.uno/gitea_admin/ci-claude:2.1.250
    commands:
      - sh scripts/ci/test-model-selection.sh
@@ -6,8 +6,8 @@ when:
      - "ansible/roles/claude-workstation/**"
      - "ansible/plays/install-claude-workstation.yml"
      - ".woodpecker/deploy-claude-workstation.yml"
-  - event: manual
-    evaluate: 'PIPELINE == "deploy-claude-workstation"'
+  - event: deployment
+    evaluate: 'CI_PIPELINE_DEPLOY_TARGET == "deploy-claude-workstation"'

 timeout: 30

@@ -8,8 +8,8 @@ when:
    path:
      - "opentofu/**"
      - ".woodpecker/deploy-infrastructure.yml"
-  - event: manual
-    evaluate: 'PIPELINE == "deploy-infrastructure"'
+  - event: deployment
+    evaluate: 'CI_PIPELINE_DEPLOY_TARGET == "deploy-infrastructure"'

 steps:
  - name: validate-secrets
@@ -84,7 +84,7 @@ steps:
    image: gitea.renner.uno/gitea_admin/ci-tofu:2026-04-29
    directory: opentofu
    when:
-      - event: manual
+      - event: deployment
        evaluate: 'TOFU_APPLY == "true"'
    environment:
      TF_IN_AUTOMATION: "true"
@@ -7,8 +7,8 @@ when:
      - "ansible/plays/install-netbird-client.yml"
      - "ansible/inventory/group_vars/claude_workstation/**"
      - ".woodpecker/deploy-netbird-client.yml"
-  - event: manual
-    evaluate: 'PIPELINE == "deploy-netbird-client"'
+  - event: deployment
+    evaluate: 'CI_PIPELINE_DEPLOY_TARGET == "deploy-netbird-client"'

 timeout: 30

@@ -9,8 +9,8 @@ when:
      - "ansible/roles/netbird-proxy-watchdog/**"
      - "ansible/plays/install-netbird-proxy.yml"
      - ".woodpecker/deploy-netbird-proxy.yml"
-  - event: manual
-    evaluate: 'PIPELINE == "deploy-netbird-proxy"'
+  - event: deployment
+    evaluate: 'CI_PIPELINE_DEPLOY_TARGET == "deploy-netbird-proxy"'

 timeout: 30

@@ -9,8 +9,8 @@ when:
      - "ansible/roles/netbird-proxy-watchdog/**"
      - "ansible/plays/install-netbird-server.yml"
      - ".woodpecker/deploy-netbird-server.yml"
-  - event: manual
-    evaluate: 'PIPELINE == "deploy-netbird-server"'
+  - event: deployment
+    evaluate: 'CI_PIPELINE_DEPLOY_TARGET == "deploy-netbird-server"'

 timeout: 30

@@ -1,6 +1,6 @@
 when:
-  - event: manual
-    evaluate: 'PIPELINE == "e2e-test"'
+  - event: deployment
+    evaluate: 'CI_PIPELINE_DEPLOY_TARGET == "e2e-test"'

 steps:
  - name: e2e
@@ -7,7 +7,8 @@
 #                was harmless at daily/weekly cadence — but alert-monitor.yml
 #                fires every 15 minutes, so piggybacking must be opt-in now.
 #                A new cron that SHOULD also run e2e gets its name added here.
-#   - manual   : `woodpecker pipeline create --branch master --var PIPELINE=e2e k.renner/homelab`
+#   - deploy   : `woodpecker-cli pipeline deploy k.renner/homelab <n> e2e`, where
+#                <n> is an existing pipeline to promote.

 when:
  - event: cron
@@ -16,8 +17,8 @@ when:
    cron: update-audit
  - event: cron
    cron: weekly-update
-  - event: manual
-    evaluate: 'PIPELINE == "e2e"'
+  - event: deployment
+    evaluate: 'CI_PIPELINE_DEPLOY_TARGET == "e2e"'

 steps:
  - name: model-selection-tests
@@ -25,7 +26,7 @@ steps:
    # fetch-models.sh response mapping. No cluster, no secrets, no network — the
    # ci-claude image just provides sh + jq. Keeps the flag-injection regression
    # test from rotting (it exercises the exact injection shapes).
-    image: gitea.renner.uno/gitea_admin/ci-claude:2.1.247
+    image: gitea.renner.uno/gitea_admin/ci-claude:2.1.250
    commands:
      - sh scripts/ci/test-model-selection.sh

@@ -1,27 +0,0 @@
-when:
-  - event: manual
-    evaluate: 'PIPELINE == "install-garage-synology"'
-
-steps:
-  - name: run-playbook
-    image: gitea.renner.uno/gitea_admin/ci-ansible:2026-04-29
-    environment:
-      ANSIBLE_FORCE_COLOR: "true"
-      ANSIBLE_HOST_KEY_CHECKING: "false"
-      SSH_PRIVATE_KEY:
-        from_secret: ssh_private_key
-      VAULT_PASS:
-        from_secret: vault_pass
-      PROXMOX_TOKEN_ID:
-        from_secret: proxmox_token_id
-      PROXMOX_TOKEN_SECRET:
-        from_secret: proxmox_token_secret
-    commands:
-      - mkdir -p ~/.ssh
-      - echo "$SSH_PRIVATE_KEY" | base64 -d > ~/.ssh/id_ed25519
-      - chmod 600 ~/.ssh/id_ed25519
-      - 'printf "Host *\n\tStrictHostKeyChecking no\n\tUserKnownHostsFile /dev/null\n" > ~/.ssh/config'
-      - cd ansible
-      - echo "$$VAULT_PASS" > .vault_pass && chmod 600 .vault_pass
-      - export ANSIBLE_VAULT_PASSWORD_FILE=.vault_pass
-      - ansible-playbook -i inventory/ plays/install-garage-synology.yml -v
@@ -34,13 +34,13 @@
 #   - cron   : a cron NAMED exactly "issue-fix":
 #                woodpecker repo cron add --repo k.renner/homelab \
 #                  --name issue-fix --branch master --schedule '41 * * * *'
-#   - manual : woodpecker pipeline create --branch master \
-#                --var PIPELINE=issue-fix k.renner/homelab
+#   - deploy : woodpecker-cli pipeline deploy k.renner/homelab <n> issue-fix
+#              where <n> is an existing pipeline to promote.
 when:
  - event: cron
    cron: issue-fix
-  - event: manual
-    evaluate: 'PIPELINE == "issue-fix"'
+  - event: deployment
+    evaluate: 'CI_PIPELINE_DEPLOY_TARGET == "issue-fix"'

 steps:
  - name: fetch-diag
@@ -62,7 +62,7 @@ steps:
      - bash scripts/ci/make-diag-kubeconfig.sh

  - name: issue-fix-agent
-    image: gitea.renner.uno/gitea_admin/ci-claude:2.1.247
+    image: gitea.renner.uno/gitea_admin/ci-claude:2.1.250
    environment:
      CLAUDE_CODE_OAUTH_TOKEN:
        from_secret: claude_code_oauth_token
@@ -53,9 +53,9 @@
 #
 # Triggering: pull_request only — automatic on PR open + push-to-open-PR. To
 # re-review a PR, push a commit (the new head sha clears the dedup marker below
-# and earns a fresh review). There is deliberately no manual PIPELINE trigger:
-# Woodpecker exposes a --var only to YAML variable substitution and `when`
-# filters, NOT to a step's shell environment, so a --var PR=<n> re-review would
+# and earns a fresh review). There is deliberately no on-demand trigger for a
+# specific PR: Woodpecker exposes injected variables to YAML substitution and
+# `when` filters, NOT to a step's shell environment, so a PR=<n> re-review would
 # silently no-op (the step would find no PR number and exit green).
 # (Note: keep literal dollar-brace out of THIS file entirely, even in comments —
 # Woodpecker runs its variable substitution over the whole YAML text, comments
@@ -65,7 +65,7 @@ when:

 steps:
  - name: pr-review-agent
-    image: gitea.renner.uno/gitea_admin/ci-claude:2.1.247
+    image: gitea.renner.uno/gitea_admin/ci-claude:2.1.250
    environment:
      CLAUDE_CODE_OAUTH_TOKEN:
        from_secret: claude_code_oauth_token
@@ -1,8 +1,20 @@
+# Trivy scan of the IaC tree and every image referenced from ansible/, with an
+# agent pass that opens a PR for CRITICAL/HIGH findings.
+#
+# Triggers:
+#   - cron       : the named `daily-security-scan` cron, matched by NAME.
+#                  Crons cannot carry variables — `woodpecker-cli repo cron add`
+#                  has no --var — so a variable gate can never match a cron.
+#   - deployment : woodpecker-cli pipeline deploy k.renner/homelab <n> security-scan
+#                  The target rides in pipeline metadata as
+#                  CI_PIPELINE_DEPLOY_TARGET, which the workflow-root filter
+#                  does see, unlike manual-run variables on Woodpecker 3.18
+#                  (#582).
 when:
  - event: cron
-    evaluate: 'PIPELINE == "security-scan"'
-  - event: manual
-    evaluate: 'PIPELINE == "security-scan"'
+    cron: daily-security-scan
+  - event: deployment
+    evaluate: 'CI_PIPELINE_DEPLOY_TARGET == "security-scan"'

 steps:
  - name: iac-scan
@@ -28,12 +40,28 @@ steps:
        cat /tmp/images.txt
        echo "---"
        i=0
+        failed=0
+        failed_names=""
        while IFS= read -r img; do
          i=$$((i+1))
          out="trivy-image-$$i.json"
          echo "=== [$$i] $$img -> $$out ==="
-          trivy image --skip-db-update --scanners vuln --timeout 15m --severity CRITICAL,HIGH --ignore-unfixed --format json -o "$$out" "$$img" || true
+          # Keep going on a bad image so one unpullable reference cannot cost
+          # the scan of every image after it, but record that it happened.
+          if ! trivy image --skip-db-update --scanners vuln --timeout 15m --severity CRITICAL,HIGH --ignore-unfixed --format json -o "$$out" "$$img"; then
+            failed=$$((failed+1))
+            failed_names="$$failed_names $$img"
+          fi
        done < /tmp/images.txt
+        echo "--- scanned $$((i - failed)) of $$i images ---"
+        if [ "$$failed" -gt 0 ]; then
+          echo "NOT SCANNED:$$failed_names"
+          exit 1
+        fi
+    # Non-zero above turns this step red without failing the workflow, so the
+    # fix agent still runs on what was scanned. Coverage is reported, not
+    # enforced: an incomplete scan is visible in the step status instead of
+    # being indistinguishable from a clean one.
    failure: ignore

  - name: security-fix-agent
@@ -42,7 +70,7 @@ steps:
    # this step is skipped — otherwise we'd fork-bomb PRs.
    when:
      - branch: master
-    image: gitea.renner.uno/gitea_admin/ci-claude:2.1.247
+    image: gitea.renner.uno/gitea_admin/ci-claude:2.1.250
    environment:
      CLAUDE_CODE_OAUTH_TOKEN:
        from_secret: claude_code_oauth_token
@@ -10,14 +10,14 @@
 # report; the pipeline posts it to a single persistent Gitea issue.
 #
 # Triggering:
-#   - cron   : a cron NAMED exactly "update-audit". Unlike the other pipelines
-#              here (which gate on an injected `PIPELINE` var set at cron-create
-#              time in the UI), this uses Woodpecker's documented `cron:` name
-#              filter so the schedule can be created entirely from the CLI:
+#   - cron   : a cron NAMED exactly "update-audit". Crons carry no variables —
+#              `repo cron add` takes name, branch, schedule and enabled — so the
+#              name filter is the only thing that can select a workflow for a
+#              scheduled run:
 #                woodpecker repo cron add --repo k.renner/homelab \
 #                  --name update-audit --branch master --schedule '@weekly'
-#   - manual : woodpecker pipeline create --branch master \
-#                --var PIPELINE=update-audit k.renner/homelab
+#   - deploy : woodpecker-cli pipeline deploy k.renner/homelab <n> update-audit
+#              where <n> is an existing pipeline to promote.
 #
 # NOTE: e2e.yml runs on an explicit list of cron names that includes this one,
 # so a weekly e2e run piggybacks on the audit (it was a bare `event: cron`
@@ -25,12 +25,12 @@
 when:
  - event: cron
    cron: update-audit
-  - event: manual
-    evaluate: 'PIPELINE == "update-audit"'
+  - event: deployment
+    evaluate: 'CI_PIPELINE_DEPLOY_TARGET == "update-audit"'

 steps:
  - name: update-audit-agent
-    image: gitea.renner.uno/gitea_admin/ci-claude:2.1.247
+    image: gitea.renner.uno/gitea_admin/ci-claude:2.1.250
    environment:
      CLAUDE_CODE_OAUTH_TOKEN:
        from_secret: claude_code_oauth_token
@@ -1,37 +0,0 @@
---
-# PBS Client configuration for nas-1
-pbs_backup_paths:
-  - /volume1/Documents
-  - /volume1/homes
-  - /volume1/Homeassistant Backup
-  - /volume1/Games
-  - /volume1/Media
-  - /volume1/Music
-  - /volume1/video
-  - /volume2/Backup
-  - /volume1/Movies
-
-  # Add more paths as needed:
-  # - /volume1/photos
-  # - /volume1/music
-
-# PBS Server connection
-pbs_server_host: "pbs2.renner.uno"
-pbs_server_port: 8007
-pbs_datastore: "pool"
-pbs_backup_id: "nas-1"
-
-# PBS Authentication - credentials in vault.yml
-pbs_username: "root@pam!nas-1"
-
-# Garage S3 (K8s backup target)
-garage_image: "dxflrs/garage:v2.3.0"
-garage_zone: "dsm"
-garage_capacity: "2T"
-
-# SSH connection - use password auth (key not supported by DSM)
-ansible_ssh_pass: "{{ nas_ssh_password }}"
-ansible_become_pass: "{{ nas_ssh_password }}"
-
-# Python 3.9+ from Synology package
-ansible_python_interpreter: /usr/local/bin/python3.9
@@ -1,27 +0,0 @@
-$ANSIBLE_VAULT;1.1;AES256
-34663462636437633437613863366266306334666635643839313737343739643864613136613938
-3138393966306561656366396465383539303137333036300a376237376636356230343834386362
-36636535396330333732383233323263613132333166343739396137636538653435336662353138
-6565643866623235610a316266383933303830323936303735623338623165386339383733373435
-62366461363833616438373237383132366438326364363462333265366533323861376630643365
-39343036343838333639363432643738666630363063323636646661313539643465366532363438
-33303837623234613434633563666562346536346435353461373536323737376233386163326537
-61383963343737656438356136613537623538333163343466343739346135333439616432663763
-36663962633037376561326434303035333938646436663832303432346365353439666435613337
-34363636326530333233313231343566306432376532396666643761633136316333376337666135
-65363338623035663438323338663863366362653131336434323865326530326534623631336263
-36633063383031386161363131333636393364623436613331353733313235383062656131313164
-63393665633361313961363637663237616364643236383835393736643937393564656238376362
-31393465383361326264376133393233616264663636383337363962356532613438663637616536
-33653137656335323763313461323633616635346232303062323062333766383931313965346361
-66656461313239633366636463633465636463663937393932636337643861383937663662306466
-32353166643832303234643264633062616330393963333034623432613730366339306637613239
-34626161663666316339323762373639353335653663353635366664643063393432623039306237
-38363161343930363763393364663364353735343236313665313461626165636135303839363164
-37336638396564326166376233353730346563656266323535666265323062646232323938353732
-32636235333839623166633761376334316434613235333730353439343262393537363461333238
-32653435623362666662336532643832356163326332636436346132643237643030343761663332
-36663530356539303636663438646430363335353135323932613863666264363533326137353164
-31663032346236616263343637396439663334396166656364623637666535386530383535663435
-66303037303265616634373763616437333835333136336563323339666563663931396133633131
-3963653266633535303630653335666166313336653831623362
@@ -8,6 +8,8 @@
 #   pve_cluster (jupiter/neptune/saturn)  run Talos on bare metal; no SSH at all
 #   authentik_db / authentik_app          authentik runs in-cluster (CNPG)
 #   grafana                               runs in-cluster
+#   synology_nas (nas-1)                  powered off; Garage and the PBS client
+#                                         it hosted are gone with it
 # Their hosts no longer resolve, except the three that resolve to Talos nodes.

 [netbird_server]
@@ -17,10 +19,6 @@ netbird.renner.uno ansible_user=root
 proxy-1.renner.uno ansible_user=root
 proxy-2.renner.uno ansible_user=root

-
-[synology_nas]
-nas-1.renner.uno ansible_user=ladmin ansible_python_interpreter=/usr/bin/python3
-
 # Every bare-metal edge thin client. Gets the host-generic roles only:
 # flash-wear handling, the log shipper, the MQTT bridge, the VLAN
 # sub-interface. Nothing here assumes any peripheral is attached.
@@ -1,313 +0,0 @@
---
-# Synology-specific playbook using raw module (Python 3.8 workaround)
-# Deploys Garage (https://garagehq.deuxfleurs.fr) as a single-node S3 target
-# for K8s backups (Velero + CNPG Barman Cloud Plugin).
-#
-# Required secrets in host_vars/nas-1.renner.uno/vault.yml:
-#   garage_rpc_secret:     "<openssl rand -hex 32>"
-#   garage_admin_token:    "<openssl rand -base64 32>"
-#   garage_metrics_token:  "<openssl rand -base64 32>"
-#
-# Post-install bootstrap (run once, record the returned secret keys):
-#   docker exec garaged /garage status
-#   docker exec garaged /garage bucket create k8s-velero
-#   docker exec garaged /garage bucket create k8s-cnpg
-#   docker exec garaged /garage bucket create k8s-secrets
-#   docker exec garaged /garage bucket create k8s-migration
-#   docker exec garaged /garage key create velero-key
-#   docker exec garaged /garage key create cnpg-key
-#   docker exec garaged /garage key create secrets-key
-#   docker exec garaged /garage key create migration-key
-#   docker exec garaged /garage bucket allow --read --write --owner k8s-velero    --key velero-key
-#   docker exec garaged /garage bucket allow --read --write --owner k8s-cnpg      --key cnpg-key
-#   docker exec garaged /garage bucket allow --read --write --owner k8s-secrets   --key secrets-key
-#   docker exec garaged /garage bucket allow --read --write --owner k8s-migration --key migration-key
- name: Install Garage S3 on Synology NAS
-  hosts: synology_nas
-  gather_facts: false
-
-  vars:
-    garage_data_dir: "/volume1/docker/garage"
-
-  tasks:
-    - name: Create Garage directory tree
-      ansible.builtin.raw: |
-        mkdir -p {{ garage_data_dir }}/config \
-                 {{ garage_data_dir }}/meta \
-                 {{ garage_data_dir }}/data
-      changed_when: true
-
-    # Secret writes use the same compare-then-write pattern as garage.toml so
-    # rotation is idempotent AND a real change can drive force-recreate below.
-    # Garage reads these files once at startup; without container restart, a
-    # rotated token leaves the running process holding the previous value.
-    - name: Write rpc_secret
-      ansible.builtin.raw: |
-        cat > {{ garage_data_dir }}/config/rpc_secret.new << 'SECRET_EOF'
-        {{ garage_rpc_secret }}
-        SECRET_EOF
-        chmod 600 {{ garage_data_dir }}/config/rpc_secret.new
-        if [ ! -f {{ garage_data_dir }}/config/rpc_secret ] \
-        || ! cmp -s {{ garage_data_dir }}/config/rpc_secret.new {{ garage_data_dir }}/config/rpc_secret; then
-          mv {{ garage_data_dir }}/config/rpc_secret.new {{ garage_data_dir }}/config/rpc_secret
-          echo RPC_SECRET_CHANGED
-        else
-          rm {{ garage_data_dir }}/config/rpc_secret.new
-        fi
-      register: rpc_secret_write
-      changed_when: "'RPC_SECRET_CHANGED' in rpc_secret_write.stdout"
-      no_log: true
-
-    - name: Write admin_token
-      ansible.builtin.raw: |
-        cat > {{ garage_data_dir }}/config/admin_token.new << 'SECRET_EOF'
-        {{ garage_admin_token }}
-        SECRET_EOF
-        chmod 600 {{ garage_data_dir }}/config/admin_token.new
-        if [ ! -f {{ garage_data_dir }}/config/admin_token ] \
-        || ! cmp -s {{ garage_data_dir }}/config/admin_token.new {{ garage_data_dir }}/config/admin_token; then
-          mv {{ garage_data_dir }}/config/admin_token.new {{ garage_data_dir }}/config/admin_token
-          echo ADMIN_TOKEN_CHANGED
-        else
-          rm {{ garage_data_dir }}/config/admin_token.new
-        fi
-      register: admin_token_write
-      changed_when: "'ADMIN_TOKEN_CHANGED' in admin_token_write.stdout"
-      no_log: true
-
-    - name: Write metrics_token
-      ansible.builtin.raw: |
-        cat > {{ garage_data_dir }}/config/metrics_token.new << 'SECRET_EOF'
-        {{ garage_metrics_token }}
-        SECRET_EOF
-        chmod 600 {{ garage_data_dir }}/config/metrics_token.new
-        if [ ! -f {{ garage_data_dir }}/config/metrics_token ] \
-        || ! cmp -s {{ garage_data_dir }}/config/metrics_token.new {{ garage_data_dir }}/config/metrics_token; then
-          mv {{ garage_data_dir }}/config/metrics_token.new {{ garage_data_dir }}/config/metrics_token
-          echo METRICS_TOKEN_CHANGED
-        else
-          rm {{ garage_data_dir }}/config/metrics_token.new
-        fi
-      register: metrics_token_write
-      changed_when: "'METRICS_TOKEN_CHANGED' in metrics_token_write.stdout"
-      no_log: true
-
-    - name: Write garage.toml
-      ansible.builtin.raw: |
-        cat > {{ garage_data_dir }}/config/garage.toml.new << 'TOML_EOF'
-        metadata_dir = "/var/lib/garage/meta"
-        data_dir     = "/var/lib/garage/data"
-
-        # SQLite chosen over LMDB: single-node deployment has no peers to
-        # rebuild metadata from on unclean-shutdown corruption. SQLite is
-        # slower but portable and has no LMDB corruption window.
-        db_engine = "sqlite"
-
-        # 6-hour auto-snapshot of the metadata DB as a backstop against
-        # corruption; last two snapshots retained.
-        metadata_auto_snapshot_interval = "6h"
-
-        # Single-zone, single-node: only coherent replication factor.
-        replication_factor = 1
-
-        rpc_bind_addr    = "[::]:3901"
-        rpc_secret_file  = "/etc/garage/rpc_secret"
-
-        compression_level = 2
-
-        # 64 MB blocks (default 1 MB; previously 20 MB). On the 5 × 7 TB
-        # Btrfs RAID 5 volume the per-block fixed cost (SQLite lookup,
-        # dir traversal, hash verify, zstd decompress, nginx buffering)
-        # is the dominant overhead per object; larger blocks amortize
-        # it. block_size is a maximum, so 16 MiB CNPG WAL segments
-        # still upload as one block each. Only applies to NEW uploads;
-        # existing objects keep their original chunking until re-uploaded.
-        block_size = "64M"
-
-        [s3_api]
-        api_bind_addr = "[::]:3900"
-        s3_region     = "garage"
-        root_domain   = ".s3.{{ inventory_hostname }}"
-
-        [s3_web]
-        bind_addr   = "[::]:3902"
-        root_domain = ".web.{{ inventory_hostname }}"
-
-        [admin]
-        api_bind_addr      = "[::]:3903"
-        admin_token_file   = "/etc/garage/admin_token"
-        metrics_token_file = "/etc/garage/metrics_token"
-        TOML_EOF
-        if [ ! -f {{ garage_data_dir }}/config/garage.toml ] \
-        || ! cmp -s {{ garage_data_dir }}/config/garage.toml.new {{ garage_data_dir }}/config/garage.toml; then
-          mv {{ garage_data_dir }}/config/garage.toml.new {{ garage_data_dir }}/config/garage.toml
-          echo GARAGE_TOML_CHANGED
-        else
-          rm {{ garage_data_dir }}/config/garage.toml.new
-        fi
-      register: garage_toml_write
-      changed_when: "'GARAGE_TOML_CHANGED' in garage_toml_write.stdout"
-
-    - name: Write docker-compose.yml
-      ansible.builtin.raw: |
-        cat > {{ garage_data_dir }}/docker-compose.yml << 'COMPOSE_EOF'
-        services:
-          garage:
-            image: {{ garage_image }}
-            container_name: garaged
-            restart: unless-stopped
-            # HTTP services (3900/3902/3903) bind to loopback; DSM
-            # reverse proxy fronts and TLS-terminates them. RPC 3901
-            # is exposed directly — the Noise handshake is raw TCP,
-            # so DSM RP cannot front it. rpc_secret gates auth.
-            ports:
-              - "3901:3901"
-              - "127.0.0.1:3900:3900"
-              - "127.0.0.1:3902:3902"
-              - "127.0.0.1:3903:3903"
-            volumes:
-              - {{ garage_data_dir }}/config/garage.toml:/etc/garage.toml:ro
-              - {{ garage_data_dir }}/config/rpc_secret:/etc/garage/rpc_secret:ro
-              - {{ garage_data_dir }}/config/admin_token:/etc/garage/admin_token:ro
-              - {{ garage_data_dir }}/config/metrics_token:/etc/garage/metrics_token:ro
-              - {{ garage_data_dir }}/meta:/var/lib/garage/meta
-              - {{ garage_data_dir }}/data:/var/lib/garage/data
-        COMPOSE_EOF
-      changed_when: true
-
-    - name: Pull image and start Garage container
-      ansible.builtin.shell: |
-        export PATH=$PATH:/usr/local/bin
-        cd {{ garage_data_dir }} && docker compose pull && docker compose up -d
-      become: true
-      changed_when: true
-
-    # Garage does not reload config on SIGHUP and compose does not notice
-    # when a bind-mounted host file changes. Force-recreate the container
-    # when garage.toml OR any of the three secret files changed so the new
-    # config / rotated tokens are picked up.
-    - name: Force-recreate garaged when garage.toml or secrets changed
-      ansible.builtin.shell: |
-        export PATH=$PATH:/usr/local/bin
-        cd {{ garage_data_dir }} && docker compose up -d --force-recreate garage
-      become: true
-      when: garage_toml_write.changed
-            or rpc_secret_write.changed
-            or admin_token_write.changed
-            or metrics_token_write.changed
-      changed_when: true
-
-    - name: Wait for Garage to accept CLI calls
-      ansible.builtin.shell: |
-        export PATH=$PATH:/usr/local/bin
-        for i in $(seq 1 30); do
-          if docker exec garaged /garage status >/dev/null 2>&1; then
-            exit 0
-          fi
-          sleep 2
-        done
-        exit 1
-      become: true
-      changed_when: false
-
-    - name: Check whether cluster layout is already applied
-      ansible.builtin.shell: |
-        export PATH=$PATH:/usr/local/bin
-        docker exec garaged /garage status
-      become: true
-      register: garage_status
-      changed_when: false
-
-    - name: Apply single-node layout (idempotent — only on first run)
-      when: "'NO ROLE ASSIGNED' in garage_status.stdout"
-      ansible.builtin.shell: |
-        export PATH=$PATH:/usr/local/bin
-        NODE_ID=$(docker exec garaged /garage node id | head -n 1 | cut -d@ -f1)
-        docker exec garaged /garage layout assign "$NODE_ID" \
-          -z {{ garage_zone }} \
-          -c {{ garage_capacity }} \
-          -t {{ inventory_hostname_short }}
-        docker exec garaged /garage layout apply --version 1
-      become: true
-      changed_when: true
-
-    - name: Report Garage status
-      ansible.builtin.shell: |
-        export PATH=$PATH:/usr/local/bin
-        docker exec garaged /garage status
-      become: true
-      register: garage_status_final
-      changed_when: false
-
-    - name: Show Garage status
-      ansible.builtin.debug:
-        var: garage_status_final.stdout_lines
-
-    # Bootstrap buckets + keys. Idempotent: bucket_info / key_info return
-    # non-zero when missing, so we only create on first run. Access-key
-    # secrets are captured at create time and persisted to chmod-600 files
-    # under {{ garage_data_dir }}/config/keys/<key>.creds on nas-1. These
-    # files are the only post-install record of the secrets — Garage does
-    # not expose them again.
-    - name: Bootstrap Garage buckets, keys, and grants
-      ansible.builtin.shell: |
-        set -e
-        export PATH=$PATH:/usr/local/bin
-        KEYS_DIR={{ garage_data_dir }}/config/keys
-        mkdir -p "$KEYS_DIR"
-        chmod 700 "$KEYS_DIR"
-
-        bootstrap_pair() {
-          local BUCKET="$1"
-          local KEY="$2"
-          local CREDS_FILE="$KEYS_DIR/$KEY.creds"
-
-          if ! docker exec garaged /garage bucket info "$BUCKET" >/dev/null 2>&1; then
-            docker exec garaged /garage bucket create "$BUCKET"
-          fi
-
-          if ! docker exec garaged /garage key info "$KEY" >/dev/null 2>&1; then
-            CREATE_OUT=$(docker exec garaged /garage key create "$KEY")
-            KEY_ID=$(echo "$CREATE_OUT"   | awk '/^Key ID:/     {print $3}')
-            SECRET=$(echo "$CREATE_OUT"   | awk '/^Secret key:/ {print $3}')
-            umask 177
-            printf 'KEY_ID=%s\nSECRET_KEY=%s\n' "$KEY_ID" "$SECRET" > "$CREDS_FILE"
-          fi
-
-          docker exec garaged /garage bucket allow \
-            --read --write --owner \
-            "$BUCKET" --key "$KEY"
-        }
-
-        bootstrap_pair k8s-velero    velero-key
-        bootstrap_pair k8s-cnpg      cnpg-key
-        bootstrap_pair k8s-secrets   secrets-key
-        bootstrap_pair k8s-migration migration-key
-        bootstrap_pair tfstate       tfstate-key
-      become: true
-      changed_when: true
-      no_log: true
-
-    - name: Report bucket + key state (no secrets)
-      ansible.builtin.shell: |
-        export PATH=$PATH:/usr/local/bin
-        docker exec garaged /garage bucket list
-        echo "---"
-        docker exec garaged /garage key list
-        echo "---"
-        ls -l {{ garage_data_dir }}/config/keys/ 2>&1
-      become: true
-      register: garage_bootstrap_state
-      changed_when: false
-
-    - name: Show bucket + key state
-      ansible.builtin.debug:
-        var: garage_bootstrap_state.stdout_lines
-
-    - name: Post-install note
-      ansible.builtin.debug:
-        msg:
-          - "Buckets: k8s-velero, k8s-cnpg, k8s-secrets, k8s-migration, tfstate"
-          - "Keys:    velero-key, cnpg-key, secrets-key, migration-key, tfstate-key"
-          - "Secrets are written to {{ garage_data_dir }}/config/keys/<key>.creds on nas-1 (chmod 600, root-owned)."
-          - "SSH to nas-1 and `sudo cat` the file to retrieve KEY_ID + SECRET_KEY for Velero / CNPG / migration / tfstate config."
@@ -1,104 +0,0 @@
---
-# Synology-specific playbook using raw module (Python 3.8 workaround)
- name: Install PBS Client on Synology NAS
-  hosts: synology_nas
-  gather_facts: false
-
-  vars:
-    pbs_client_data_dir: "/volume1/docker/pbs-client"
-
-  tasks:
-    - name: Create PBS client directory
-      ansible.builtin.raw: |
-        mkdir -p {{ pbs_client_data_dir }}/state
-      changed_when: true
-
-    - name: Create docker-compose.yml
-      ansible.builtin.raw: |
-        cat > {{ pbs_client_data_dir }}/docker-compose.yml << 'COMPOSE_EOF'
-        services:
-          pbs-client:
-            image: proxmox/proxmox-backup-client:latest
-            container_name: pbs-client
-            restart: unless-stopped
-            hostname: {{ pbs_backup_id }}
-            env_file:
-              - .env
-            volumes:
-              - {{ pbs_client_data_dir }}/state:/root/.proxmox-backup
-        {% for path in pbs_backup_paths %}
-              - "{{ path }}:{{ path }}:ro"
-        {% endfor %}
-            mem_limit: 2g
-            command: ["sleep", "infinity"]
-        COMPOSE_EOF
-      changed_when: true
-
-    - name: Create .env file
-      ansible.builtin.raw: |
-        cat > {{ pbs_client_data_dir }}/.env << 'ENV_EOF'
-        PBS_REPOSITORY={{ pbs_username }}@{{ pbs_server_host }}:{{ pbs_server_port }}:{{ pbs_datastore }}
-        PBS_PASSWORD={{ pbs_password }}
-        ENV_EOF
-        chmod 600 {{ pbs_client_data_dir }}/.env
-      changed_when: true
-
-    - name: Create backup script
-      ansible.builtin.raw: |
-        cat > {{ pbs_client_data_dir }}/backup.sh << 'SCRIPT_EOF'
-        #!/bin/bash
-        set -e
-        source {{ pbs_client_data_dir }}/.env
-
-        BACKUP_SOURCES=""
-        {% for path in pbs_backup_paths %}
-        BACKUP_SOURCES="$BACKUP_SOURCES {{ path | basename }}.pxar:{{ path }}"
-        {% endfor %}
-
-        echo "[$(date '+%Y-%m-%d %H:%M:%S')] Starting backup for {{ pbs_backup_id }}"
-        docker exec pbs-client proxmox-backup-client backup \
-            $BACKUP_SOURCES \
-            --backup-id {{ pbs_backup_id }} \
-            --repository "${PBS_REPOSITORY}"
-
-        echo "[$(date '+%Y-%m-%d %H:%M:%S')] Backup completed, pruning..."
-        docker exec pbs-client proxmox-backup-client prune \
-            --repository "${PBS_REPOSITORY}" \
-            --backup-id {{ pbs_backup_id }} \
-            --keep-last {{ pbs_keep_last | default(3) }} \
-            --keep-daily {{ pbs_keep_daily | default(7) }} \
-            --keep-weekly {{ pbs_keep_weekly | default(4) }} \
-            --keep-monthly {{ pbs_keep_monthly | default(6) }}
-
-        echo "[$(date '+%Y-%m-%d %H:%M:%S')] Done"
-        SCRIPT_EOF
-        chmod 755 {{ pbs_client_data_dir }}/backup.sh
-      changed_when: true
-
-    - name: Start PBS client container
-      ansible.builtin.shell: |
-        export PATH=$PATH:/usr/local/bin
-        cd {{ pbs_client_data_dir }} && docker compose pull && docker compose up -d
-      become: true
-      changed_when: true
-
-    - name: Setup cron job for daily backup at 2 AM (root crontab)
-      ansible.builtin.shell: |
-        # Remove existing entry if present
-        crontab -l 2>/dev/null | grep -v "pbs-client/backup.sh" | crontab - 2>/dev/null || true
-        # Add new entry
-        (crontab -l 2>/dev/null; echo "0 2 * * * {{ pbs_client_data_dir }}/backup.sh >> /var/log/pbs-backup.log 2>&1") | crontab -
-      become: true
-      changed_when: true
-
-    - name: Verify container is running
-      ansible.builtin.shell: |
-        export PATH=$PATH:/usr/local/bin
-        docker ps --filter name=pbs-client --format "{{ '{{' }}.Status{{ '}}' }}"
-      become: true
-      register: container_status
-      changed_when: false
-
-    - name: Show container status
-      ansible.builtin.debug:
-        msg: "PBS client container status: {{ container_status.stdout }}"
@@ -1,11 +0,0 @@
---
- name: Install PBS Client on Synology NAS
-  hosts: synology_nas
-  become: true
-  # Variables are set in:
-  # - Role defaults: ansible/roles/pbs-client/defaults/main.yml
-  # - Host overrides: ansible/inventory/host_vars/<hostname>/vars.yml
-  # - Secrets: ansible/inventory/host_vars/<hostname>/vault.yml
-
-  roles:
-    - pbs-client
@@ -1,18 +0,0 @@
-#!/bin/sh
-# Forced-command target for the netbird-backup SSH key (see the
-# "Authorize the cluster backup key" task): takes a CONSISTENT snapshot
-# of the management SQLite store via the online-backup API (safe against
-# a live writer, unlike copying store.db) and streams a gzipped tar to
-# stdout. The key's authorized_keys entry is restricted to exactly this
-# script — the in-cluster puller cannot run anything else.
-#
-# Deliberately store.db ONLY: /opt/netbird/config is fully regenerable
-# from the netbird-server role's templates + vault, and including it
-# would put the plaintext TURN secret (turnserver.conf) into every
-# nightly tarball. Restore = re-run the role (rebuilds config), then
-# untar this dump into /opt/netbird/management/.
-set -eu
-tmp=$(mktemp -d)
-trap 'rm -rf "$tmp"' EXIT
-sqlite3 /opt/netbird/management/store.db ".backup '$tmp/store.db'"
-tar -C "$tmp" -czf - store.db
@@ -77,29 +77,22 @@
  register: docker_compose_result
  changed_when: "'Started' in docker_compose_result.stdout or 'Creating' in docker_compose_result.stdout"

-# Off-VPS backup of the management store (SPOF assessment 2026-07-25:
-# this SQLite DB — peers, setup keys, groups, routes — had zero backup
-# coverage; losing the VPS meant re-enrolling the entire mesh). The VPS
-# cannot reach any PBS (both PBS names resolve to the public proxy,
-# ports closed), so the CLUSTER pulls: a CronJob
-# (kubernetes/infrastructure/netbird-backup) ssh's in with a dedicated
-# key that is locked to the dump script below, and lands the tarball on
-# a Ceph PVC that Velero ships offsite. The dump is store.db ONLY —
-# /opt/netbird/config is regenerable from this role's templates + vault
-# and would otherwise leak the TURN secret into every tarball. Restore:
-# re-run this role (rebuilds config), then untar the dump into
-# /opt/netbird/management/.
- name: Install the backup dump script
-  ansible.builtin.copy:
-    src: netbird-backup-dump
-    dest: /usr/local/bin/netbird-backup-dump
-    mode: "0755"
+# The management store has no cluster-side backup. Pulling one put a root
+# key on this host that the cluster held, and this server's own state is
+# its own business to protect rather than the cluster's. Dropping the two
+# tasks that placed them would only stop ansible managing the key and the
+# script — the pair below revokes them instead, and can go once the role
+# has run against every host that ever carried them.
+- name: Remove the backup dump script
+  ansible.builtin.file:
+    path: /usr/local/bin/netbird-backup-dump
+    state: absent

- name: Authorize the cluster backup key (forced command, no shell)
+- name: Revoke the cluster backup key
  ansible.posix.authorized_key:
    user: root
    key: "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIFeW/L9bHMTSa5/Qb0ClppCf4Z0hL39JwzI6tBmKd2FG netbird-backup@homelab-cluster"
-    key_options: 'restrict,command="/usr/local/bin/netbird-backup-dump"'
+    state: absent

 - name: Wait for management container to be ready
  ansible.builtin.pause:
@@ -1,32 +0,0 @@
---
-# PBS Client configuration
-pbs_client_version: "latest"
-pbs_client_data_dir: "/opt/pbs-client"
-
-# PBS Server connection (override in host_vars)
-pbs_server_host: "pbs.obg.renner.uno"
-pbs_server_port: 8007
-pbs_datastore: "backups"
-
-# Authentication (override in vault!)
-pbs_username: "backup@pbs"
-pbs_password: ""
-# pbs_fingerprint: ""  # Optional - omit for Let's Encrypt certs
-
-# Backup configuration
-pbs_backup_id: "nas-1"
-pbs_backup_paths:
-  - /volume1/docker
-  - /volume1/homes
-
-# Schedule (cron format)
-pbs_backup_schedule: "0 2 * * *"  # 2 AM daily
-
-# Retention policy (prune settings)
-pbs_keep_last: 3
-pbs_keep_daily: 7
-pbs_keep_weekly: 4
-pbs_keep_monthly: 6
-
-# Container resource limits
-pbs_memory_limit: "2g"
@@ -1,6 +0,0 @@
---
- name: Restart PBS client
-  community.docker.docker_compose_v2:
-    project_src: "{{ pbs_client_data_dir }}"
-    state: restarted
-    docker_cli: "{{ docker_cli | default('/usr/local/bin/docker') }}"
@@ -1,23 +0,0 @@
---
- name: Create PBS client directories
-  ansible.builtin.file:
-    path: "{{ item }}"
-    state: directory
-    mode: '0755'
-  loop:
-    - "{{ pbs_client_data_dir }}"
-    - "{{ pbs_client_data_dir }}/state"
-
- name: Copy PBS client docker-compose file
-  ansible.builtin.template:
-    src: docker-compose.yml.j2
-    dest: "{{ pbs_client_data_dir }}/docker-compose.yml"
-    mode: '0644'
-  notify: Restart PBS client
-
- name: Start PBS client via Docker Compose
-  community.docker.docker_compose_v2:
-    project_src: "{{ pbs_client_data_dir }}"
-    state: present
-    pull: always
-    docker_cli: "{{ docker_cli | default('/usr/local/bin/docker') }}"
@@ -1,6 +0,0 @@
-# PBS Client Environment Configuration
-PBS_REPOSITORY={{ pbs_username }}@{{ pbs_server_host }}:{{ pbs_server_port }}:{{ pbs_datastore }}
-PBS_PASSWORD={{ pbs_password }}
-{% if pbs_fingerprint | default('') != '' %}
-PBS_FINGERPRINT={{ pbs_fingerprint }}
-{% endif %}
@@ -1,36 +0,0 @@
-#!/bin/bash
-# PBS Backup Script for {{ pbs_backup_id }}
-# Managed by Ansible - do not edit manually
-
-set -e
-
-# Load environment
-source {{ pbs_client_data_dir }}/.env
-
-# Build backup command with all paths
-BACKUP_SOURCES=""
-{% for path in pbs_backup_paths %}
-BACKUP_SOURCES="$BACKUP_SOURCES {{ path | basename }}.pxar:{{ path }}"
-{% endfor %}
-
-echo "[$(date '+%Y-%m-%d %H:%M:%S')] Starting backup for {{ pbs_backup_id }}"
-
-# Run backup via Docker
-docker exec pbs-client proxmox-backup-client backup \
-    $BACKUP_SOURCES \
-    --backup-id {{ pbs_backup_id }} \
-    --repository "${PBS_REPOSITORY}"
-
-echo "[$(date '+%Y-%m-%d %H:%M:%S')] Backup completed"
-
-# Prune old backups
-echo "[$(date '+%Y-%m-%d %H:%M:%S')] Pruning old backups"
-docker exec pbs-client proxmox-backup-client prune \
-    --repository "${PBS_REPOSITORY}" \
-    --backup-id {{ pbs_backup_id }} \
-    --keep-last {{ pbs_keep_last }} \
-    --keep-daily {{ pbs_keep_daily }} \
-    --keep-weekly {{ pbs_keep_weekly }} \
-    --keep-monthly {{ pbs_keep_monthly }}
-
-echo "[$(date '+%Y-%m-%d %H:%M:%S')] Prune completed"
@@ -1,30 +0,0 @@
-services:
-  pbs-client:
-    image: aterfax/pbs-client:{{ pbs_client_version }}
-    container_name: pbs-client
-    restart: unless-stopped
-    hostname: {{ pbs_backup_id }}
-    environment:
-      - PBS_ENDPOINT={{ pbs_server_host }}:{{ pbs_server_port }}
-      - PBS_DATASTORE={{ pbs_datastore }}
-      - PBS_API_KEY_NAME={{ pbs_username }}
-      - PBS_API_KEY_SECRET={{ pbs_password }}
-      - PBS_PASSWORD={{ pbs_password }}
-      - PBS_ENCRYPTION_PASSWORD={{ pbs_encryption_password | default(pbs_password) }}
-      - PBS_REPOSITORY={{ pbs_username }}@{{ pbs_server_host }}:{{ pbs_server_port }}:{{ pbs_datastore }}
-      - PBS_BACKUP_ID={{ pbs_backup_id }}
-      - CRON_SCHEDULE={{ pbs_backup_schedule }}
-      - PBS_BACKUP_CMD_APPEND_EXTRA_OPTS=--crypt-mode=none
-      - PRUNE_KEEP_LAST={{ pbs_keep_last | default(3) }}
-      - PRUNE_KEEP_DAILY={{ pbs_keep_daily | default(7) }}
-      - PRUNE_KEEP_WEEKLY={{ pbs_keep_weekly | default(4) }}
-      - PRUNE_KEEP_MONTHLY={{ pbs_keep_monthly | default(6) }}
-      - CRON_BACKUP_ONLY=1
-    volumes:
-      - {{ pbs_client_data_dir }}/state:/root/.config/proxmox-backup
-{% for path in pbs_backup_paths %}
-      - "{{ path }}:/backups/{{ path | basename | replace(' ', '_') }}:ro"
-{% endfor %}
-    tmpfs:
-      - /tmp
-    mem_limit: {{ pbs_memory_limit }}
@@ -0,0 +1,111 @@
+# Cilium: one owner
+
+## The rule
+
+Cilium is owned by **Flux**, through `infrastructure/cilium/helmrelease.yaml`.
+Talos provides the conditions for a CNI and nothing else. Never both.
+
+Talos-only would also be a valid answer — it is the simpler one, and it keeps a
+cold rebuild self-forming. It is rejected here only because it costs Flux's
+reconciliation, image automation and value ergonomics for the one component
+most likely to need a careful, reviewed change.
+
+## Where we are
+
+Both own it, which is the state this document exists to end.
+
+- 22 Cilium objects are listed in the `talos-bootstrap-manifests-inventory`
+  ConfigMap: both DaemonSets, the operator Deployment, both ConfigMaps, the
+  ServiceAccounts, the ClusterRoles/Bindings and the `cilium-secrets`
+  namespace. That is the whole installation, not a fragment.
+- The same objects carry `meta.helm.sh/release-name: cilium`.
+- `cilium-config` has three field managers: `helm-controller`, `talos` and
+  `kubectl-patch`.
+
+The consequences are not theoretical. The seed sat at Cilium 1.19.2 for twelve
+days while the chart was on 1.20.1, and `upgrade-k8s --dry-run` shows that a
+Kubernetes upgrade in that state downgrades the CNI and switches off socket
+load balancing. Separately, `enable-bgp-control-plane` and the two
+native-routing CIDRs exist in no file at all — applied by hand, so a cold
+rebuild would have come up with BGP off while the peering CRDs in git made it
+look configured.
+
+Nothing fails when these drift. That is the whole problem.
+
+## Target state
+
+**Talos** keeps exactly this, in `talos/patches/cluster.yaml`, and gains nothing
+else:
+
+```yaml
+cluster:
+  network:
+    cni:
+      name: none
+  proxy:
+    disabled: true
+```
+
+No `inlineManifests` entry for cilium. `talos/patches/cilium-cni.yaml` is
+deleted.
+
+**Flux** owns everything else. `helmrelease.yaml` is the single source for
+every Cilium setting, including the three that were hand-patched.
+
+**A cold rebuild** installs Cilium once, by hand, between `talosctl bootstrap`
+and the Flux phase, from the same HelmRelease values. This is the cost of the
+decision and it is deliberate: the cluster no longer forms itself from the
+machine config alone. Given `bootstrap.sh talos` is already dead and Step 2 of
+RUNBOOK-cold-rebuild.md is already a manual procedure, the marginal cost is one
+documented command.
+
+## Transition
+
+The order matters, because Talos prunes what its inventory used to list and no
+longer does — removing the manifest naively deletes the CNI.
+
+1. **Track the untracked settings first.** `bgpControlPlane.enabled`,
+   `ipv4NativeRoutingCIDR`, `ipv6NativeRoutingCIDR` into the HelmRelease. Note
+   this is not a pure change of ownership: enabling bgpControlPlane through the
+   chart also emits five companion keys the hand-patch never set, so Cilium has
+   been running on its own defaults for router-id allocation. Verify the BGP
+   sessions after Flux applies it.
+
+2. **Remove cilium from `cluster.inlineManifests`.** This has no immediate
+   effect. Evidence: Talos was upgraded to 1.13.9 four days ago and Cilium
+   stayed at 1.20.1 — an OS upgrade does not reconcile bootstrap manifests.
+   Only `upgrade-k8s` does.
+
+3. **Prove the prune before running it.** `upgrade-k8s --dry-run
+   --manifests-no-prune` and confirm the 22 objects are not listed for
+   deletion. `NoPrune` is honoured by the dry run as well as the apply
+   (`pkg/cluster/kubernetes/talos_managed.go`), so this is a real test and not
+   a reading of the flag description.
+
+4. **Run `upgrade-k8s --manifests-no-prune`.** The inventory is rewritten
+   without Cilium and the objects survive. Helm is then sole owner. This is the
+   same run that takes Kubernetes 1.35.2 → 1.36.3.
+
+5. **Verify** the inventory lists no Cilium, the agents did not restart, and
+   the BGP sessions are still established.
+
+6. **Delete `talos/patches/cilium-cni.yaml`** and add the install step to
+   RUNBOOK-cold-rebuild.md.
+
+## Not part of this, and not a defect either
+
+The cluster runs `routingMode: tunnel` (the chart default, set nowhere) while
+also advertising pod CIDRs over BGP. That is not one layer too many — the two
+carry different directions:
+
+- **VXLAN** carries pod-to-pod between nodes, directly, node to node.
+- **BGP** gives the UDM routes into the pod CIDRs so traffic from the LAN can
+  reach pods. That path goes through the router by definition.
+
+Dropping the encapsulation in favour of native routing would not simplify
+anything; it would push inter-node pod traffic onto the underlay path and
+through the UDM, replacing a direct node-to-node hop with a router hop.
+
+`routingMode` being unset is still worth knowing — the current behaviour is a
+default nobody chose rather than a decision anyone recorded — but the default
+is the right one here, and this document is not the place to revisit it.
@@ -198,8 +198,7 @@ talosctl gen secrets --from-controlplane-config cp.yaml -o secrets.yaml
 talosctl gen config homelab https://k8s.renner.uno:6443 \
  --with-secrets secrets.yaml --output-types controlplane \
  --config-patch @talos/patches/cluster.yaml \
-  --config-patch @<cilium additive half> \
-  --config-patch @talos/patches/registry-mirror.yaml \
+  --config-patch @talos/patches/containerd-layer-retention.yaml \
  --config-patch @talos/patches/k8s-N.yaml -o install.yaml
 ```

@@ -208,9 +207,11 @@ Confirm `cluster.id` matches the running cluster before applying.
 Strip the generated `HostnameConfig` document — it collides with
 `machine.network.hostname` from the per-node patch. `bootstrap.sh` does the same.

-`cilium-cni.yaml` cannot be passed whole: its `$patch: delete` document fails
-against a base with no `inlineManifests` (issue #581). Use only the additive
-second document.
+There is no CNI patch to pass any more. Talos supplies only `cni: none` and
+`proxy: disabled`; Cilium is installed from its HelmRelease values, which is
+Step 2b of RUNBOOK-cold-rebuild.md. A node converted into an existing cluster
+gets its CNI from the Cilium DaemonSet already running there, so nothing extra
+is needed here.

 Validate:

@@ -119,9 +119,11 @@ against do not exist, and the node ends up with no address on any interface.
 Beyond that it carries:

 - `siderolabs/intel-ucode` — no hypervisor supplies microcode here
- `siderolabs/i915` — the Alder Lake-P Iris Xe. Nothing requests `/dev/dri`
-  today; present so wanting hardware transcoding later is a config change
-  rather than another rolling reinstall
+- `siderolabs/i915` — the Alder Lake-P Iris Xe. The Intel GPU device plugin
+  (`infrastructure/intel-gpu-plugin`) turns this into the schedulable resource
+  `gpu.intel.com/i915`, which `apps/llama-server` requests for LLM inference
+  and which any hardware-transcoding workload would use too. Without the
+  extension the plugin finds no `/dev/dri` and advertises nothing
 - `siderolabs/thunderbolt` — inert until `machine.kernel.modules` requests
  `thunderbolt`/`thunderbolt_net`, present for the same reason. Note its udev
  rule auto-authorises any Thunderbolt device attached once those modules load
@@ -136,11 +138,18 @@ in `talos/patches/k8s-N.yaml`.

 ## Step 2 — talos: form the cluster + get kubeconfig

-**Do not use `kubernetes/bootstrap.sh talos`.** That phase cannot generate a
-config: it passes `talos/patches/cilium-cni.yaml` whole, and that file's
-`$patch: delete` document fails against a base with no `inlineManifests`
-(#581). Its other phases — `flux`, `wait-apps` — are still used, in Steps 3, 5
-and 6; only config generation is broken.
+`kubernetes/bootstrap.sh talos` does this, including the CNI install that used
+to be a hand-typed step. It was unusable for months because it passed
+`cilium-cni.yaml` whole and the file's `$patch: delete` document failed against
+a fresh config (#581); that file no longer exists, so the failure is gone with
+it.
+
+Verified as far as it can be without wiping a cluster: `talosctl gen config`
+with exactly the patches the script passes produces a config carrying
+`cni: none` and `proxy: disabled` that passes `talosctl validate --mode metal`.
+The apply-and-bootstrap half has not been exercised since the rewrite. Read the
+manual procedure below before running the script, so you know what it is doing
+and can take over at any step if it stops.

 The procedure below is what actually works, and is the same one
 `RUNBOOK-baremetal-conversion.md` uses.
@@ -160,17 +169,17 @@ for N in 1 2 3; do
  talosctl gen config homelab https://k8s.renner.uno:6443 \
    --with-secrets secrets.yaml --output-types controlplane \
    --config-patch @talos/patches/cluster.yaml \
-    --config-patch @<cilium additive half> \
-    --config-patch @talos/patches/registry-mirror.yaml \
+    --config-patch @talos/patches/containerd-layer-retention.yaml \
    --config-patch @talos/patches/k8s-$N.yaml -o install-k8s-$N.yaml
 done
 ```

-Two things the generator gets wrong for this repo, both of which will bite
-silently:
+There is no CNI patch here any more. Talos supplies `cni: none` and
+`proxy: disabled` from `cluster.yaml` and nothing else; Cilium is installed in
+Step 2b below. See PROPOSAL-cilium-single-owner.md.
+
+One thing the generator gets wrong for this repo, and it bites silently:

- **`cilium-cni.yaml` cannot be passed whole** — extract only its additive
-  second document. See issue #581.
 - **Strip the generated `HostnameConfig`** — it collides with
  `machine.network.hostname` from the per-node patch.

@@ -209,8 +218,53 @@ talosctl -n k8s-1.srv.renner.uno bootstrap
 talosctl -n k8s-1.srv.renner.uno kubeconfig .
 ```

-Ends when all three nodes are `Ready`. `scripts/import-cluster-access.sh` is the
-supported way to get the kubeconfig into place afterwards.
+`scripts/import-cluster-access.sh` is the supported way to get the kubeconfig
+into place afterwards.
+
+The nodes will **not** reach `Ready` here. Talos is configured with `cni: none`,
+so there is no pod network until Step 2b — expect `NotReady` with
+`container runtime network not ready` and carry on.
+
+## Step 2b — cilium: install the CNI
+
+Nothing schedules without it, Flux included, so this comes before Step 3. Talos
+no longer carries a rendered copy of Cilium; `helmrelease.yaml` is the only
+place it is configured, and this installs from those same values so the cluster
+comes up on what git describes rather than on a second, drifting copy. See
+PROPOSAL-cilium-single-owner.md for why it works this way.
+
+`bootstrap.sh talos` already did this. What follows is the same thing by hand,
+for when the script stopped partway or you are not using it.
+
+Every input is read out of `helmrelease.yaml`. Nothing here is a version or a
+URL you have to keep in step with anything — copy the block as it stands:
+
+```sh
+HR=kubernetes/infrastructure/cilium/helmrelease.yaml
+
+helm repo add cilium "$(yq -r 'select(.kind == "HelmRepository") | .spec.url' "$HR")"
+helm repo update cilium
+
+yq 'select(.kind == "HelmRelease") | .spec.values' "$HR" > /tmp/cilium-values.yaml
+
+helm install cilium cilium/cilium \
+  --version "$(yq -r 'select(.kind == "HelmRelease") | .spec.chart.spec.version' "$HR")" \
+  --namespace kube-system \
+  -f /tmp/cilium-values.yaml \
+  --set prometheus.serviceMonitor.enabled=false
+```
+
+`--version` takes the HelmRelease's range verbatim; helm resolves it to the same
+release Flux would pick, so the two cannot diverge. That is the point of writing
+it this way — a pinned version in a runbook is a copy nobody maintains, and the
+next rebuild installs something the HelmRelease will immediately fight.
+
+The one literal is `serviceMonitor`, disabled for this install only: its CRD
+arrives with the monitoring stack much later and the object would fail to apply.
+Flux adds the real one once it owns the release. Nothing else is overridden,
+which is what lets helm-controller adopt this release rather than replace it.
+
+Ends when all three nodes are `Ready`.

 ## Step 3 — flux: bootstrap GitOps **from the GitHub mirror** (break-glass)

@@ -1,18 +0,0 @@
-apiVersion: external-secrets.io/v1
-kind: ExternalSecret
-metadata:
-  name: barman-cloud-creds
-  namespace: authentik
-  annotations:
-    # Prune-disabled — a standing guard kept from the seed->authentik-KS handoff (barman creds).
-    kustomize.toolkit.fluxcd.io/prune: disabled
-spec:
-  refreshInterval: 1h
-  secretStoreRef:
-    kind: ClusterSecretStore
-    name: openbao
-  target:
-    name: barman-cloud-creds # keeps the old Secret's name — consumers unchanged
-  dataFrom:
-    - extract:
-        key: seed/authentik/barman-creds
@@ -25,20 +25,13 @@ data:
        attrs:
          local: true

-      # Retired OIDC layer. Paperless's URL-level access is gated by the
-      # paperless-gate ProxyProvider (below); user identity is forwarded
-      # from the gate to paperless via the X-authentik-* request headers
-      # and consumed by paperless via PAPERLESS_ENABLE_HTTP_REMOTE_USER
-      # (see kubernetes/apps/paperless/paperless.yaml). One Authentik
-      # Application, one Provider — the dual-OAuth2-flow setup with a
-      # separate paperless OIDC client + django-allauth callback was
-      # structurally fine but added a second consent screen on first
-      # login for no real defense-in-depth gain.
+      # Retired OIDC layer. Access is gated by the paperless-gate
+      # ProxyProvider below, which forwards identity as X-authentik-* headers
+      # consumed via PAPERLESS_ENABLE_HTTP_REMOTE_USER.
      #
-      # Order matters: delete the Application BEFORE the OAuth2Provider
-      # because Application.provider is on_delete=PROTECT, so the
-      # OAuth2Provider can't be removed while the Application still
-      # references it.
+      # ORDER MATTERS: delete the Application BEFORE the OAuth2Provider.
+      # Application.provider is on_delete=PROTECT, so the provider cannot be
+      # removed while an Application still references it.
      - model: authentik_core.application
        identifiers:
          slug: paperless
@@ -49,22 +42,15 @@ data:
          name: Paperless
        state: absent

-      # Also clean up the very-early orphan `paperless` ProxyProvider
-      # left behind from this session's first attempts. It's not bound
-      # to anything any more, just leftover state in the DB.
+      # Orphan ProxyProvider, unbound — leftover DB state.
      - model: authentik_providers_proxy.proxyprovider
        identifiers:
          name: paperless
        state: absent

-      # Dedicated forward-auth gate for paperless. This is a SEPARATE
-      # outpost (its own Deployment + Service `ak-outpost-paperless-
-      # gate`) running in front of paperless so every request is
-      # authenticated and authorized by Authentik before it reaches
-      # paperless's own attack surface. The gate sits on top of, and
-      # separate from, the OIDC OAuth2Provider above (which is what
-      # paperless's django-allauth uses for SSO once a request makes
-      # it through the gate).
+      # Dedicated forward-auth gate for paperless: its own outpost
+      # Deployment + Service, so every request is authenticated before it
+      # reaches paperless.
      - id: paperless-gate-provider
        model: authentik_providers_proxy.proxyprovider
        identifiers:
@@ -73,16 +59,13 @@ data:
        attrs:
          authorization_flow: !Find [authentik_flows.flow, [slug, default-provider-authorization-implicit-consent]]
          invalidation_flow: !Find [authentik_flows.flow, [slug, default-provider-invalidation-flow]]
-          # Proxy (not forward_domain) so the outpost itself terminates
-          # the request and forwards to paperless — moving the trust
-          # boundary off ingress-nginx and onto paperless-gate. ingress-
-          # nginx now only routes paperless.renner.uno to the outpost
-          # service; it never talks to paperless directly. The outpost
-          # is what populates X-Authentik-Username on the upstream
-          # request, and the NetworkPolicy in the paperless namespace
-          # only allows traffic to paperless from the gate outpost pod
-          # itself, so ingress-nginx (or any other in-cluster workload)
-          # cannot bypass the gate to inject headers.
+          # Proxy, NOT forward_domain: the outpost terminates the request
+          # itself, so the trust boundary sits here rather than at the ingress
+          # controller, which only routes to the outpost Service and never
+          # reaches paperless directly. The outpost populates
+          # X-Authentik-Username, and the paperless NetworkPolicy admits
+          # traffic only from this outpost — so nothing else in the cluster
+          # can bypass the gate and inject those headers.
          mode: proxy
          internal_host: http://paperless.paperless.svc.cluster.local
          internal_host_ssl_validation: false
@@ -91,19 +74,12 @@ data:
          access_token_validity: hours=24
          refresh_token_validity: days=30
          intercept_header_auth: true
-          # Pass paperless's entire static-asset tree through anonymously.
-          # Two reasons:
-          # 1. <link rel="manifest"> is fetched with `credentials: 'omit'`
-          #    (W3C spec, no crossorigin attr) so the cookie is never sent
-          #    — every page load and every SPA navigation turned into a
-          #    302 → auth.renner.uno round-trip with an orphan session JWT.
-          #    Same root cause as the retired music-assistant-gate (see
-          #    comment further below); paperless can't retire the gate so
-          #    it carves out the offending paths instead.
-          # 2. Every CSS/JS/icon fetch otherwise validates the cookie at
-          #    the outpost — pure overhead on assets that carry no
-          #    authentication value. Django's STATIC tree is public by
-          #    design; MEDIA (under /api/documents/*) stays gated.
+          # The static-asset tree passes anonymously, and must. A
+          # <link rel="manifest"> is fetched with `credentials: 'omit'` per
+          # the W3C spec, so the session cookie is never sent and every page
+          # load turns into a redirect loop through the login origin. Django's
+          # STATIC tree is public by design; MEDIA under /api/documents/*
+          # stays gated.
          skip_path_regex: ^/static/.*

      - model: authentik_core.application
@@ -130,18 +106,14 @@ data:
          negate: false
          failure_result: false

-      # Retired: the music-assistant-gate ProxyProvider, Application,
-      # and dedicated Outpost. The gate fundamentally conflicted with
-      # MA's PWA model — Chrome fetches manifest.webmanifest / sw.js /
-      # icons with `credentials: 'omit'` (per W3C spec, no crossorigin
-      # attribute on MA's <link rel="manifest">), and the cached
-      # service worker bypasses fresh navigations on PWA cold-start so
-      # the Authentik cookie never lands in the WebAPK's cookie jar.
-      # MA has its own auth (delegated to Home Assistant); the gate's
-      # marginal value didn't justify the recurring breakage.
-      # Order matters: Application before Provider before Outpost.
-      # Application.provider is on_delete=PROTECT, so the Provider
-      # can't be removed while the Application still references it.
+      # Retired: the music-assistant gate. A forward-auth gate cannot work in
+      # front of a PWA — the manifest and service worker are fetched with
+      # `credentials: 'omit'`, and a cached service worker bypasses fresh
+      # navigations, so the session cookie never reaches the installed app.
+      # Do not reintroduce one there; MA delegates auth to Home Assistant.
+      #
+      # ORDER MATTERS: Application before Provider before Outpost, because
+      # Application.provider is on_delete=PROTECT.
      - model: authentik_core.application
        identifiers:
          slug: music-assistant-gate
@@ -157,18 +129,13 @@ data:
          name: music-assistant-gate
        state: absent

-      # Dedicated outpost: its ONLY job is to serve the in-cluster
-      # /outpost.goauthentik.io/auth/nginx endpoint that nginx
-      # auth_request hits for every request to paperless. The
-      # browser-facing legs of the OAuth flow (/start, /callback, the
-      # `/if/...` login UI, /application/o/authorize, /api, etc.) all
-      # need to happen on auth.renner.uno because that's the origin
-      # WebAuthn/FIDO/TOTP credentials are bound to. So we attach the
-      # ProxyProvider to BOTH outposts (see embedded outpost below) and
-      # set authentik_host_browser to auth.renner.uno here too — the
-      # nginx auth_request happens server-to-server, but if the
-      # dedicated outpost ever does emit a redirect URL, it points at
-      # the right host.
+      # Dedicated outpost, serving the in-cluster auth endpoint only.
+      #
+      # The browser-facing legs of the OAuth flow must happen on
+      # auth.renner.uno, because that is the origin WebAuthn credentials are
+      # bound to. Hence the ProxyProvider is attached to BOTH this outpost and
+      # the embedded one, and authentik_host_browser points at auth.renner.uno
+      # here too — so any redirect this outpost emits names the right host.
      - model: authentik_outposts.outpost
        identifiers:
          name: paperless-gate
@@ -196,12 +163,7 @@ data:
            kubernetes_ingress_secret_name: "authentik-outpost-tls"
            kubernetes_json_patches: null

-      # Tear down the leftover paperless-proxy Application from an
-      # earlier experiment. The orphan `paperless` ProxyProvider that
-      # used to back paperless.app is left in place — it's PROTECTed
-      # by Application.provider as long as anything references it, and
-      # leftover orphans don't break anything. Delete via the Authentik
-      # UI once everything's confirmed working.
+      # Leftover Application from an earlier experiment.
      - model: authentik_policies.policybinding
        identifiers:
          target: !Find [authentik_core.application, [slug, paperless-proxy]]
@@ -217,15 +179,11 @@ data:
      # ------------------------------------------------------------------
      # vscode config-editor gate
      #
-      # code-server (the HA /config editor sidecar) runs with --auth=none,
-      # as root, mounting the whole HA /config incl. plaintext secrets.yaml
-      # and .storage. This gate moves it behind Authentik with a passkey
-      # step-up, mirroring the paperless-gate proxy-outpost pattern above:
-      # the dedicated ak-outpost-vscode-gate terminates the request,
-      # enforces the session, and forwards to the code-server Service.
-      # Traefik only ever routes vscode.home.renner.uno to the outpost; the
-      # home-assistant CNP is tightened so ONLY the gate outpost may reach
-      # :8080 (see home-assistant-ns.yaml + vscode-gate-egress.yaml).
+      # code-server runs with --auth=none, as root, mounting the whole HA
+      # /config including plaintext secrets.yaml and .storage. This gate is
+      # the only thing in front of it: the outpost terminates the request and
+      # enforces a passkey step-up, Traefik routes only to the outpost, and
+      # the home-assistant CNP admits :8080 from the gate alone.
      # ------------------------------------------------------------------
      - id: vscode-config-editors-group
        model: authentik_core.group
@@ -265,17 +223,14 @@ data:
          access_token_validity: hours=24
          refresh_token_validity: days=30
          intercept_header_auth: true
-          # code-server is a service-worker app: <link rel="manifest"> and
-          # the service worker are fetched with credentials:'omit', which
-          # turned into a /authorize redirect loop and forced the RETIREMENT
-          # of the music-assistant gate (see comment above). Carve its
-          # static/manifest/SW tree out so those cookieless fetches pass
-          # through instead of 302-looping; the editor's actual content
-          # (the /config tree) is served over authenticated websocket/API
-          # paths, which stay gated.
-          # NOTE: the exact skip set is code-server-version-specific and
-          # MUST be confirmed post-deploy against the real redirect-loop
-          # behaviour (see the PR validation checklist).
+          # code-server is a service-worker app, so its manifest and SW are
+          # fetched with credentials:'omit' and 302-loop unless carved out.
+          # The editor's actual content rides authenticated websocket/API
+          # paths and stays gated.
+          #
+          # This skip set is version-specific: re-check it after a
+          # code-server bump, because a renamed asset path reintroduces the
+          # loop silently.
          skip_path_regex: ^/(_static/|manifest\.json|.*\.webmanifest|.*serviceWorker\.js).*

      - model: authentik_core.application
@@ -331,16 +286,11 @@ data:
      # ------------------------------------------------------------------
      # shelly-manager gate
      #
-      # shelly-manager has no authentication of its own: anything that can
-      # reach :8080 can rewrite Shelly device config, push scripts, and read
-      # the stored per-device AdminPassword values. Until now the only
-      # control was reachability of shelly-manager.home.renner.uno.
-      #
-      # Same shape as the vscode-gate above: a dedicated outpost terminates
-      # the request, enforces a passkey step-up, and forwards to the
-      # shelly-manager Service. Traefik only ever routes the hostname to the
-      # outpost; the home-assistant CNP allows ONLY this outpost to reach
-      # :8080 (see home-assistant-ns.yaml + shelly-manager-gate-egress.yaml).
+      # shelly-manager has no authentication of its own: anything that reaches
+      # :8080 can rewrite device config, push scripts and read the stored
+      # per-device AdminPassword values. Same shape as the vscode gate — the
+      # outpost is the only control, Traefik routes only to it, and the CNP
+      # admits :8080 from this outpost alone.
      # ------------------------------------------------------------------
      - id: shelly-managers-group
        model: authentik_core.group
@@ -927,6 +877,105 @@ data:
            kubernetes_ingress_secret_name: "authentik-outpost-tls"
            kubernetes_json_patches: null

+      # llama-server WebUI gate
+      #
+      # llama-server has no authentication of its own — it serves its chat UI
+      # and a full OpenAI-compatible API to anyone who can reach the port. That
+      # is why it was LAN-only until now. This gate is what makes a public
+      # hostname defensible: the outpost terminates every request, enforces the
+      # session, and only then forwards to llama-server.
+      #
+      # Same reasoning as vscode-gate, and the same passkey step-up: what sits
+      # behind the gate is entirely unprotected, so the gate is the whole of the
+      # access control rather than a second factor on top of an app login.
+      #
+      # In-cluster consumers (Home Assistant, Paperless, CI) are unaffected:
+      # they address llama-server.ai.svc.cluster.local directly and never pass
+      # through Traefik or this outpost.
+      #
+      # No group and no policy binding: any user who can authenticate gets in,
+      # as with Immich, Audiobookshelf, Home Assistant and Music Assistant. The
+      # gates that pin membership to a named user in git — vscode, esphome,
+      # zigbee2mqtt, shelly-manager, prometheus — are admin interfaces, where
+      # the allowlist is the point. A chat UI is not one of those, and deciding
+      # its membership here would put an access-control choice in a manifest
+      # instead of leaving it where the user directory belongs.
+      # ------------------------------------------------------------------
+      - id: llama-gate-provider
+        model: authentik_providers_proxy.proxyprovider
+        identifiers:
+          name: llama-gate
+        state: present
+        attrs:
+          # Both flows, mirroring the Audiobookshelf provider. Setting only
+          # authorization_flow leaves authentication on Authentik's default
+          # flow, which is what made the first login clumsy — the step-up ran
+          # on top of a password prompt instead of replacing it. With the
+          # passwordless flow named explicitly, signing in is the passkey
+          # itself.
+          #
+          # Referenced by !Find rather than !KeyOf: both flows are defined in
+          # the passkey-stepup document of this ConfigMap, and !KeyOf only
+          # resolves within one document.
+          authentication_flow: !Find [authentik_flows.flow, [slug, passkey-passwordless-authentication]]
+          authorization_flow: !Find [authentik_flows.flow, [slug, passkey-stepup-authorization]]
+          invalidation_flow: !Find [authentik_flows.flow, [slug, default-provider-invalidation-flow]]
+          mode: proxy
+          internal_host: http://llama-server.ai.svc.cluster.local:8080
+          internal_host_ssl_validation: false
+          external_host: https://llm.renner.uno
+          cookie_domain: renner.uno
+          access_token_validity: hours=24
+          refresh_token_validity: days=30
+          intercept_header_auth: true
+          # The WebUI ships `<link rel="manifest">` and registers a service
+          # worker. Per the W3C spec a manifest is fetched with
+          # `credentials: 'omit'`, so it carries no session cookie and the gate
+          # answers it with a 302 to auth.renner.uno — which turns every page
+          # load into a redirect round-trip. This is the failure that forced
+          # paperless-gate's own carve-out and that retired music-assistant-gate
+          # outright. Both paths serve no authenticated content, so letting them
+          # through anonymously costs nothing.
+          skip_path_regex: ^/(manifest\.webmanifest|sw\.js)$
+
+      - model: authentik_core.application
+        identifiers:
+          slug: llama-gate
+        state: present
+        attrs:
+          name: Local LLM (Gate)
+          slug: llama-gate
+          provider: !KeyOf llama-gate-provider
+          meta_launch_url: https://llm.renner.uno
+          meta_description: "Forward-auth gate in front of the local llama-server WebUI"
+
+      - model: authentik_outposts.outpost
+        identifiers:
+          name: llama-gate
+        state: present
+        attrs:
+          type: proxy
+          service_connection: !KeyOf k8s-conn
+          providers:
+            - !KeyOf llama-gate-provider
+          config:
+            log_level: info
+            authentik_host: "http://authentik-server.authentik.svc.cluster.local"
+            authentik_host_insecure: false
+            authentik_host_browser: "https://auth.renner.uno/"
+            refresh_interval: "minutes=5"
+            container_image: null
+            object_naming_template: "ak-outpost-%(name)s"
+            kubernetes_namespace: authentik
+            kubernetes_replicas: 1
+            kubernetes_service_type: ClusterIP
+            kubernetes_disabled_components: ["ingress"]
+            kubernetes_image_pull_secrets: []
+            kubernetes_ingress_annotations: {}
+            kubernetes_ingress_class_name: null
+            kubernetes_ingress_secret_name: "authentik-outpost-tls"
+            kubernetes_json_patches: null
+
      - model: authentik_outposts.outpost
        identifiers:
          name: authentik Embedded Outpost
@@ -15,4 +15,4 @@ spec:
    name: hetzner-s3-creds # keeps the old Secret's name — consumers unchanged
  dataFrom:
    - extract:
-        key: seed/authentik/hetzner-creds
+        key: infrastructure/hetzner-s3
@@ -15,6 +15,7 @@ resources:
  - alertmanager-gate-egress.yaml
  - prometheus-gate-egress.yaml
  - wordpress-gate-egress.yaml
+  - llama-gate-egress.yaml
  - outpost-servicemonitors.yaml
  - ldap-outpost-cert.yaml
  - ldap-outpost-lb.yaml
@@ -27,5 +28,4 @@ resources:
  - cluster.yaml
  - objectstore.yaml
  - scheduled-backup.yaml
-  - barman-creds-externalsecret.yaml
  - hetzner-creds-externalsecret.yaml
@@ -0,0 +1,30 @@
+---
+# Lets the llama-gate outpost reach llama-server. The cluster baseline CNP
+# (kubernetes/infrastructure/network-policies/authentik-ns.yaml) otherwise stops
+# any authentik-namespace pod from entering the ai namespace.
+#
+# The outpost is the trust boundary: it forwards to llama-server only after
+# validating the Authentik session, and the matching ingress rule in
+# ai-ns.yaml admits nothing else — so nothing in the cluster can route around
+# the gate to reach the unauthenticated API through the public hostname.
+#
+# Scoped to this outpost's pod label rather than the whole namespace, so the
+# other gates cannot reach llama-server either.
+apiVersion: cilium.io/v2
+kind: CiliumNetworkPolicy
+metadata:
+  name: llama-gate-egress
+  namespace: authentik
+spec:
+  endpointSelector:
+    matchLabels:
+      goauthentik.io/outpost-name: llama-gate
+  egress:
+    - toEndpoints:
+        - matchLabels:
+            "k8s:io.kubernetes.pod.namespace": ai
+            app.kubernetes.io/name: llama-server
+      toPorts:
+        - ports:
+            - port: "8080"
+              protocol: TCP
@@ -1,50 +1,10 @@
 ---
-# The goauthentik.io operator (inside authentik-worker) auto-creates a
-# ServiceMonitor per outpost, but it does not stamp the
-# `release: kube-prometheus-stack` label that this cluster's Prometheus
-# requires on serviceMonitorSelector. Those operator-owned SMs are
-# silently ignored. Declare standalone SMs here with the correct label
-# so the outposts actually get scraped.
-apiVersion: monitoring.coreos.com/v1
-kind: ServiceMonitor
-metadata:
-  name: authentik-outpost-ldap
-  namespace: authentik
-  labels:
-    release: kube-prometheus-stack
-spec:
-  namespaceSelector:
-    matchNames:
-      - authentik
-  selector:
-    matchLabels:
-      goauthentik.io/outpost-name: ldap-outpost
-      goauthentik.io/outpost-type: ldap
-  endpoints:
-    - port: http-metrics
-      path: /metrics
-      interval: 30s
---
-apiVersion: monitoring.coreos.com/v1
-kind: ServiceMonitor
-metadata:
-  name: authentik-outpost-paperless-gate
-  namespace: authentik
-  labels:
-    release: kube-prometheus-stack
-spec:
-  namespaceSelector:
-    matchNames:
-      - authentik
-  selector:
-    matchLabels:
-      goauthentik.io/outpost-name: paperless-gate
-      goauthentik.io/outpost-type: proxy
-  endpoints:
-    - port: http-metrics
-      path: /metrics
-      interval: 30s
---
+# Only radius needs a hand-written ServiceMonitor. The goauthentik.io operator
+# creates one per outpost and Prometheus discovers those directly, because
+# serviceMonitorSelector here is empty (see monitoring/helmrelease-prometheus.yaml).
+# Standalone copies for ldap and paperless-gate used to live here as well; they
+# duplicated the operator's and were removed.
+#
 # Radius requires extra plumbing. The radius binary listens on :9300 just
 # like ldap/proxy (hardcoded in authentik/lib/default.yml), but authentik's
 # Python operator (`providers/radius/controllers/kubernetes.py`) omits the
@@ -53,6 +13,11 @@ spec:
 # it, radius does not. Result: the operator-managed `ak-outpost-local-radius`
 # Service exposes only UDP 1812. Add a sibling Service here that selects the
 # same pod labels and exposes 9300/TCP, then a ServiceMonitor for it.
+#
+# The operator's own `ak-outpost-local-radius` ServiceMonitor cannot cover
+# this: it selects on `app.kubernetes.io/managed-by: goauthentik.io` together
+# with `goauthentik.io/service-type: metrics`, and no Service carries both —
+# the operator's has the first, the one below has the second.
 apiVersion: v1
 kind: Service
 metadata:
@@ -86,6 +51,8 @@ spec:
    matchNames:
      - authentik
  selector:
+    # Pinned to the Service above. Without managed-by this would also match the
+    # operator's Service and scrape the same endpoint twice.
    matchLabels:
      app.kubernetes.io/managed-by: homelab
      goauthentik.io/outpost-name: local-radius
@@ -1,31 +0,0 @@
-apiVersion: networking.k8s.io/v1
-kind: Ingress
-metadata:
-  name: file
-  namespace: apps
-  labels:
-    app.kubernetes.io/name: file
-  annotations:
-    cert-manager.io/cluster-issuer: letsencrypt-cluster
-    # Backend serves HTTPS with a self-signed cert; re-encrypt + skip
-    # verify via the shared insecure-backend ServersTransport (see
-    # apps/insecure-backend-serverstransport.yaml).
-    traefik.ingress.kubernetes.io/service.serversscheme: https
-    traefik.ingress.kubernetes.io/service.serverstransport: insecure-backend@kubernetescrd
-spec:
-  ingressClassName: traefik
-  rules:
-    - host: file.renner.uno
-      http:
-        paths:
-          - path: /
-            pathType: Prefix
-            backend:
-              service:
-                name: file
-                port:
-                  number: 7001
-  tls:
-    - secretName: file-tls
-      hosts:
-        - file.renner.uno
@@ -1,18 +0,0 @@
-apiVersion: v1
-kind: Service
-metadata:
-  name: file
-  namespace: apps
-  labels:
-    app.kubernetes.io/name: file
-spec:
-  # Caddy reverse-proxied https://nas.renner.uno:7001. nas.renner.uno
-  # is a CNAME -> nas-1.renner.uno owned by UniFi DNS, k8s-gateway
-  # forwards srv lookups so this resolves cluster-side.
-  type: ExternalName
-  externalName: nas.renner.uno
-  ports:
-    - name: https
-      port: 7001
-      targetPort: 7001
-      protocol: TCP
@@ -18,15 +18,18 @@ metadata:
 #
 # Opaque-label map (maintainer reference only — NOT served publicly):
 #   services group                   infrastructure group
-#     Web Service 1 = Authentik        Infrastructure 1 = PBS 2 (pbs2.renner.uno)
+#     Web Service 1 = Authentik        Infrastructure 1 = retired (was PBS 2)
 #     Web Service 2 = Gitea            Infrastructure 2 = retired (was Proxmox VE)
 #     Web Service 3 = Immich           Infrastructure 3 = UDM DNS (10.2.40.1)
 #     Web Service 4 = Woodpecker CI    Infrastructure 4 = Mosquitto MQTT broker
 #     Web Service 5 = Grafana
 #     Web Service 6 = Home Assistant
-#     Web Service 7 = Paperless
+#     Web Service 7 = retired (was the NAS file UI; never Paperless, which
+#                     this map claimed and which nothing here checks)
 #     Web Service 8 = Audiobookshelf
 #     Web Service 9 = Music Assistant
+#     Web Service 10 = TRMNL
+#     Web Service 11 = Paperless (gate-level only, see its entry)
 data:
  config.yaml: |
    storage:
@@ -121,18 +124,10 @@ data:
        conditions:
          - "[STATUS] == any(200, 301, 302)"

-      - name: Web Service 7
-        group: services
-        url: https://file.renner.uno
-        interval: 60s
-        ui:
-          hide-hostname: true
-          hide-url: true
-          hide-port: true
-          hide-conditions: true
-          hide-errors: true
-        conditions:
-          - "[STATUS] == any(200, 301, 302)"
+      # Removed 2026-08-28: the NAS file UI (file.renner.uno). Its Ingress and
+      # ExternalName Service were deleted in #696 because they pointed at
+      # nas-1, which is powered off; this check outlived them and had been
+      # reporting failure on the public page since.

      - name: Web Service 8
        group: services
@@ -178,6 +173,29 @@ data:
        conditions:
          - "[STATUS] == any(200, 301, 302)"

+      # Paperless sits entirely behind the Authentik gate — every path,
+      # including /api/, answers 302 to unauthenticated callers, so there is no
+      # endpoint that proves the app rather than the gate. This check is
+      # therefore reachability only: DNS, TLS, Traefik and the outpost. It
+      # stays green if paperless itself is dead behind a live gate.
+      #
+      # Closing that blind spot needs an in-cluster probe of the paperless
+      # ClusterIP, which crosses a namespace boundary and so needs a
+      # CiliumNetworkPolicy first — the monitoring probes get away without one
+      # only because their targets share a namespace with the prober.
+      - name: Web Service 11
+        group: services
+        url: https://paperless.renner.uno
+        interval: 60s
+        ui:
+          hide-hostname: true
+          hide-url: true
+          hide-port: true
+          hide-conditions: true
+          hide-errors: true
+        conditions:
+          - "[STATUS] == any(200, 301, 302)"
+
      # Removed 2026-05-21: Jellyfin (media.renner.uno), Wiki (wiki.renner.uno),
      # InfluxDB (influx.renner.uno) — hostnames NXDOMAIN, no Ingress; services
      # no longer deployed. Re-add when/if they come back.
@@ -191,20 +209,11 @@ data:
      # NoData). Monitor the offsite PBS from the offsite side or via a
      # check that doesn't depend on this cluster's DNS path.

-      - name: Infrastructure 1
-        group: infrastructure
-        url: https://pbs2.renner.uno:8007
-        interval: 60s
-        client:
-          insecure-skip-verify: true
-        ui:
-          hide-hostname: true
-          hide-url: true
-          hide-port: true
-          hide-conditions: true
-          hide-errors: true
-        conditions:
-          - "[STATUS] == any(200, 301, 302)"
+      # Removed 2026-08-28: PBS 2 (pbs2.renner.uno:8007) — it has no clients
+      # left. Its two were the PVE cluster, retired to bare-metal Talos, and
+      # nas-1, powered off and dropped from the repo. Checking the liveness of
+      # a backup server that nothing backs up to reports on nothing. Re-add
+      # alongside the first host that is declared to back up to it.

      - name: Infrastructure 3
        group: infrastructure
@@ -5,6 +5,12 @@ metadata:
  namespace: apps
  labels:
    app: gatus
+  annotations:
+    # Gatus reads its config once at startup and never re-reads the file, so
+    # without this a ConfigMap change reconciles cleanly and then does nothing:
+    # git and the running checks drift apart silently, with no failed resource
+    # to notice. Adding a check would not take effect either.
+    configmap.reloader.stakater.com/reload: gatus-config
 spec:
  replicas: 1
  # RWO PVC (`gatus-data`, ceph-block) — RollingUpdate's default 25% surge
@@ -22,9 +28,30 @@ spec:
      labels:
        app: gatus
    spec:
+      # The upstream image is FROM scratch with no USER, so without this the
+      # pod runs as root and trips PodSecurity restricted on four counts.
+      #
+      # The uid is numeric because a scratch image carries no /etc/passwd for
+      # the kubelet to resolve a name against. fsGroup is what makes the switch
+      # survivable: the only write path is the sqlite store on the RWO volume
+      # (/data/gatus.db, see the storage stanza in the ConfigMap), and fsGroup
+      # both chowns the existing volume and leaves the directory group-writable
+      # so sqlite can create its -wal and -journal siblings next to the db.
+      securityContext:
+        runAsNonRoot: true
+        runAsUser: 65532
+        runAsGroup: 65532
+        fsGroup: 65532
+        seccompProfile:
+          type: RuntimeDefault
      containers:
        - name: gatus
          image: twinproduction/gatus:v5.36.0 # {"$imagepolicy": "flux-system:gatus"}
+          securityContext:
+            allowPrivilegeEscalation: false
+            capabilities:
+              drop:
+                - ALL
          ports:
            - containerPort: 8080
              name: http
@@ -210,6 +210,28 @@ spec:
            - name: vscode
              containerPort: 8080
              protocol: TCP
+          # /healthz answers 200 whenever the HTTP server is up; its body
+          # reports session heartbeat state, which is not health — an idle
+          # editor reports "expired" and is perfectly fine. So this asserts
+          # that code-server is serving, not that anyone is using it.
+          #
+          # Liveness matters here more than elsewhere in this pod: code-server
+          # shares the Home Assistant config volume, and a wedged editor is
+          # otherwise invisible until someone tries to open it.
+          livenessProbe:
+            httpGet:
+              path: /healthz
+              port: vscode
+            initialDelaySeconds: 30
+            periodSeconds: 30
+            timeoutSeconds: 5
+          readinessProbe:
+            httpGet:
+              path: /healthz
+              port: vscode
+            initialDelaySeconds: 10
+            periodSeconds: 10
+            timeoutSeconds: 5
          volumeMounts:
            - name: config
              mountPath: /config
@@ -1,21 +1,8 @@
 ---
 # Barman S3 credentials for ha-pg.
 #
-# FOLLOW-UP (#397): sourced from seed/paperless/hetzner-creds, which is not where
-# they belong. woodpecker/hetzner-creds-externalsecret.yaml has the identical
-# problem and the same note. The values are the same today, so this is correct
-# but coupled: rotating paperless's Hetzner credentials would silently change
-# the backup credentials for Home Assistant and Woodpecker too.
-#
-# The fix is one dedicated path per consumer (seed/home-assistant/hetzner-creds)
-# and a one-line change to the `key:` below. Creating it needs an OpenBao write:
-#
-#   bao kv put homelab/seed/home-assistant/hetzner-creds \
-#     @<(bao kv get -format=json homelab/seed/paperless/hetzner-creds | jq '.data.data')
-#
-# Note the mount is `homelab`, so the path is homelab/seed/... — #397 records a
-# 403 on `bao kv list seed`, which was a wrong-path error rather than a
-# permissions problem.
+# One shared path for one shared credential — see the note in
+# ../paperless/hetzner-creds-externalsecret.yaml.
 #
 # The namespace allowlist on the openbao ClusterSecretStore
 # (infrastructure/post-crds/openbao-clustersecretstore.yaml) must include this
@@ -35,4 +22,4 @@ spec:
    name: hetzner-s3-creds
  dataFrom:
    - extract:
-        key: seed/paperless/hetzner-creds
+        key: infrastructure/hetzner-s3
@@ -1,80 +1,22 @@
 ---
-# mDNS relay: gives Home Assistant sight of the IoT VLAN's mDNS announcements
-# without putting a macvlan on the HA pod itself.
+# mDNS relay: holds the multicast membership on the IoT VLAN through its own
+# macvlan and forwards each datagram to Home Assistant as ordinary UNICAST UDP.
 #
-# THE PROBLEM
+# It must stay unicast. An avahi-style reflector cannot work here — Cilium runs
+# in tunnel mode without enable-multicast, so re-emitted multicast is dropped by
+# the CNI. Unicast is carried, and python-zeroconf accepts it: its datagram
+# handler checks size and duplicates but never the destination or source
+# address. RFC 6762's QU bit makes this protocol-legal rather than a trick.
 #
-# HA's zeroconf listener joins both mDNS groups on eth0 — 224.0.0.251 and
-# ff02::fb — and never hears anything on either.
-# Multicast is link-local, so IoT-VLAN announcements do not reach the pod
-# CIDR; and Cilium runs in tunnel mode (VXLAN) without `enable-multicast`, so
-# it does not replicate multicast between pods either. Both halves of the path
-# are dead, which is why an avahi-style reflector — receive on one interface,
-# re-emit as multicast on the other — cannot work here: the re-emitted packets
-# would be dropped by the CNI.
+# This restores passive reception only — announcements, including the
+# re-announce a device sends when its address changes. HA-initiated browsing
+# still dies on eth0; that would need a querier on the VLAN side, which this
+# deliberately is not.
 #
-# Consequence for HA: the ESPHome integration dials devices at the address
-# cached in its config entry. When a lease rotates, every attempt fails with
-# `[Errno 113] Connect call failed` and the device stays unreachable, because
-# the mDNS announcement that would carry the new address never arrives. New
-# devices are never discovered at all.
-#
-# THE MECHANISM
-#
-# This relay holds the multicast membership on the IoT VLAN through its own
-# macvlan (mdns-relay-network-attachment.yaml) and forwards each datagram it
-# receives to HA as ordinary UNICAST UDP. That is the one direction of travel
-# the CNI will carry.
-#
-# It works because python-zeroconf does not filter on how a packet arrived:
-# its datagram handler validates size, deduplicates, and parses, but performs
-# no check on destination address, source address, or source port. A unicast
-# datagram delivered to :5353 is processed exactly like a multicast one. (mDNS
-# unicast responses are part of RFC 6762 — the QU bit — so this is within the
-# protocol, not a trick.)
-#
-# WHAT THIS DOES AND DOES NOT RESTORE
-#
-# Restored: passive reception. RFC 6762 requires a responder to re-announce
-# when its address changes, so a device that moves to a new lease announces
-# the move, HA sees it, and the ESPHome integration updates the config entry.
-# That is the failure this exists to fix. New devices announcing themselves
-# are likewise seen.
-#
-# NOT restored: HA-initiated browsing. Queries HA sends leave on eth0 as
-# multicast and die there, so HA cannot actively solicit a response. Anything
-# depending on a query rather than an announcement stays broken. Making that
-# work needs a querier on the VLAN side, which this relay deliberately is not.
-#
-# EXPOSURE
-#
-# The receive sockets carry so-bindtodevice=net1, so only datagrams that
-# actually arrived on the IoT VLAN interface are delivered. Binding to net1's
-# address instead is not possible — it is DHCP-leased and unknown at exec time
-# — but binding to the device achieves the same confinement without needing to
-# know the address, and needs no capability: SO_BINDTODEVICE succeeds as an
-# unprivileged uid here.
-#
-# Without it socat would bind the wildcard, and since the namespace CNP grants
-# every pod in home-assistant unrestricted access to every other pod on every
-# port, any sibling pod could reach :5353 over the cluster network and have
-# records forwarded into HA's zeroconf cache.
-#
-# What remains, and cannot be closed here: any host on the IoT VLAN can send
-# this port a datagram. That is the same trust already extended to genuine
-# mDNS from that segment, which any device there can equally forge — the relay
-# widens who can reach HA's listener, not what can be claimed. macvlan traffic
-# bypasses Cilium policy entirely, so the namespace CNP does not constrain
-# this interface either way.
-#
-# Note that the relay is not what makes HA's zeroconf reachable from inside
-# the cluster: HA binds :5353 on the pod address (v4) and the wildcard (v6),
-# and the namespace CNP already permits any sibling pod to reach it directly.
-# Confining the relay removes a second route to that listener; it does not
-# remove the first.
-#
-# Nothing else is exposed: the containers run socat and only socat, with no
-# second listener to reach.
+# so-bindtodevice=net1 on both receive sockets is load-bearing: without it
+# socat binds the wildcard, and the namespace CNP lets any sibling pod reach
+# :5353 and inject records into HA's zeroconf cache. Binding net1's address
+# instead is impossible — it is DHCP-leased and unknown at exec time.
 apiVersion: apps/v1
 kind: Deployment
 metadata:
@@ -6,32 +6,23 @@ metadata:
  labels:
    app.kubernetes.io/name: mosquitto
  annotations:
-    # REQUIRED for credential rotation to take effect at all. The startup shim
-    # rebuilds /mosquitto/auth/passwd from these Secrets on every pod start, so
-    # a rotated Secret is inert until the pod restarts — without this the new
-    # password would sit unused until some unrelated restart, while the old one
-    # stayed valid indefinitely.
+    # REQUIRED for credential rotation to take effect. The startup shim rebuilds
+    # the password file only on pod start, so without this a rotated Secret sits
+    # inert while the old password stays valid indefinitely.
    #
-    # Listed per-Secret rather than using the blanket `reloader.stakater.com/
-    # auto: "true"`, so that enrolling each remaining broker user in rotation is
-    # a visible, reviewable edit to this line rather than something that starts
-    # happening implicitly.
+    # Listed per-Secret rather than with the blanket auto annotation, so that
+    # enrolling another broker user is a visible edit to this line.
    secret.reloader.stakater.com/reload: mosquitto-health-credentials
 spec:
  replicas: 1
  strategy:
-    # No PVC anymore, so nothing to fence: the new broker can come up and pass
-    # its readiness probe before the old one is torn down. maxUnavailable:0 keeps
-    # a broker serving throughout an image bump / reschedule (clients on the old
-    # pod just reconnect to the new one); maxSurge:1 permits the brief two-pod
-    # overlap — two independent stateless brokers behind the LB, fine since there
-    # is no shared state.
+    # No PVC, so nothing to fence — the new broker can serve before the old one
+    # is torn down. Two stateless brokers overlapping behind the LB is fine.
    #
-    # NOTE: connectivity survives the roll, but RETAINED STATE DOES NOT — the
-    # new pod starts with an empty retained store, so a roll is equivalent to a
-    # broker restart for every client that depends on retention. Zigbee2MQTT
-    # does not recover from that on its own; see mosquitto-config.yaml and
-    # gitea issue #381.
+    # Connectivity survives a roll but RETAINED STATE DOES NOT: the new pod
+    # starts with an empty retained store, so every roll is a broker restart
+    # for clients that depend on retention. Zigbee2MQTT does not recover from
+    # that on its own (#381).
    type: RollingUpdate
    rollingUpdate:
      maxUnavailable: 0
@@ -44,14 +35,10 @@ spec:
      labels:
        app.kubernetes.io/name: mosquitto
    spec:
-      # Runs on any node (no nodeSelector); the mosquitto-iot LB forwards
-      # IoT-VLAN traffic to the broker wherever it lands.
-      # Availability: home-critical priority (never preempted, reschedules
-      # first) + short fault tolerations so a node failure reschedules the
-      # broker in ~30s instead of the default ~5min. With persistence off there
-      # is no PVC to fence/detach/reattach, so the broker can (re)start anywhere
-      # instantly, no longer depends on Ceph being healthy, and rolls without a
-      # tear-down-first gap (see the RollingUpdate strategy above).
+      # Runs anywhere; the mosquitto-iot LB finds it. Short fault tolerations
+      # reschedule the broker in ~30s rather than the default ~5min, which is
+      # only possible because there is no PVC to fence — so it also does not
+      # depend on Ceph being healthy.
      priorityClassName: home-critical
      terminationGracePeriodSeconds: 10
      tolerations:
@@ -6,12 +6,9 @@ metadata:
  labels:
    app.kubernetes.io/name: zigbee2mqtt
 spec:
-  # CUTOVER DONE (2026-07-23): ZHA disabled, the coordinator-backup Secret is
-  # populated in OpenBao, and Z2M is now the live Zigbee stack — so replicas is
-  # 1. It shipped at 0 as a safety interlock (Z2M contends with ZHA for the
-  # coordinator's single TCP session, and starting without the restored backup
-  # would form a NEW network and drop every device); that interlock is spent
-  # once the migration is committed. To roll back, set 0 and re-enable ZHA.
+  # Z2M is the live Zigbee stack. Never run it alongside ZHA: they contend for
+  # the coordinator's single TCP session, and a Z2M start without the restored
+  # coordinator backup forms a NEW network and drops every paired device.
  replicas: 1
  # RWO PVC → single writer; never run two pods against the same /app/data.
  strategy:
@@ -39,14 +36,10 @@ spec:
        # network_key, the latter extracted from the OpenBao coordinator backup
        # as a natural-byte-order int array.
        - name: seed-data
-          # alpine + jq, built by .woodpecker/build-ci-images.yml from
-          # ci/images/alpine-jq/. Replaces `apk add --no-cache jq` on every pod
-          # start: tools belong in the image, not installed at runtime.
-          # Referenced by tag rather than digest — these are our own images.
-          # DATED tag, not :latest, matching the ci-ansible:2026-04-29 precedent
-          # in kubernetes/infrastructure/netbird-backup/cronjob.yaml. With
-          # :latest, rebuilding this base for some unrelated consumer would
-          # silently change what this init container runs on its next pod
+          # Our own alpine + jq image, built by build-ci-images.yml. DATED tag,
+          # never :latest — rebuilding this base for an unrelated consumer
+          # would otherwise silently change what this init container runs on
+          # its next pod
          # restart, with no diff here to review — and this is the container that
          # renders the Zigbee network key. Bumping the tag is a deliberate,
          # reviewable act; the cost is remembering to bump it.
@@ -1,18 +0,0 @@
-apiVersion: external-secrets.io/v1
-kind: ExternalSecret
-metadata:
-  name: barman-cloud-creds
-  namespace: immich
-  annotations:
-    # Prune-disabled — a standing guard kept from the seed->immich-KS handoff (barman creds).
-    kustomize.toolkit.fluxcd.io/prune: disabled
-spec:
-  refreshInterval: 1h
-  secretStoreRef:
-    kind: ClusterSecretStore
-    name: openbao
-  target:
-    name: barman-cloud-creds # keeps the old Secret's name — consumers unchanged
-  dataFrom:
-    - extract:
-        key: seed/immich/barman-creds
@@ -15,4 +15,4 @@ spec:
    name: hetzner-s3-creds # keeps the old Secret's name — consumers unchanged
  dataFrom:
    - extract:
-        key: seed/immich/hetzner-creds
+        key: infrastructure/hetzner-s3
@@ -13,6 +13,5 @@ resources:
  - cluster.yaml
  - objectstore.yaml
  - scheduled-backup.yaml
-  - barman-creds-externalsecret.yaml
  - hetzner-creds-externalsecret.yaml
  - pvcs.yaml
@@ -1,20 +0,0 @@
-# Shared Traefik ServersTransport for ingresses that re-encrypt to a
-# backend serving HTTPS with a self-signed / hostname-mismatched cert:
-#
-#   apps/file       — NAS web UI on a self-signed cert
-#
-# Replaces the nginx `backend-protocol: HTTPS` + `proxy-ssl-verify: off`
-# annotation pair. Each Ingress that wants this behaviour sets
-#   traefik.ingress.kubernetes.io/service.serversscheme: https
-#   traefik.ingress.kubernetes.io/service.serverstransport: insecure-backend
-#
-# (bare name — kubernetesIngress provider resolves ServersTransport in
-# the same namespace as the Ingress; the `<ns>-<name>@kubernetescrd`
-# qualified form is for IngressRoute CRDs only).
-apiVersion: traefik.io/v1alpha1
-kind: ServersTransport
-metadata:
-  name: insecure-backend
-  namespace: apps
-spec:
-  insecureSkipVerify: true
@@ -1,10 +1,8 @@
 apiVersion: kustomize.config.k8s.io/v1beta1
 kind: Kustomization
 resources:
-  - insecure-backend-serverstransport.yaml
  - gatus/
  - external-dns/
-  - file/
  - gitea/
  - ical-proxy/
  # woodpecker/ moved to its own dedicated `woodpecker` Kustomization
@@ -0,0 +1,190 @@
+---
+# The chat endpoint, and the only one behind the ingress.
+#
+# Single-model rather than router mode. Router mode served chat and embeddings
+# from one port, but two things made that wrong here:
+#
+#   1. Its /health answers 200 as soon as the router process listens, while the
+#      models are still downloading behind it. Kubernetes marked the pod Ready
+#      within seconds of start, so traffic arrived at a server that could not
+#      answer. In single-model mode /health returns 503 until the model is
+#      resident, which is what the probes below actually need.
+#   2. Every model on the port is selectable in the built-in WebUI, including
+#      the embedding model. Asking an embedding model to chat returns fluent
+#      nonsense ("capital capital capital ...") rather than an error, and
+#      `--embeddings` does not prevent it. There is no flag to hide a model
+#      from the list — `--tags` is informational and `--ui-config` only sets UI
+#      preferences — so the only way to keep it out of the picker is to keep it
+#      off this endpoint. It runs in embed.yaml instead.
+apiVersion: apps/v1
+kind: Deployment
+metadata:
+  name: llama-server
+  namespace: ai
+  labels:
+    app.kubernetes.io/name: llama-server
+spec:
+  replicas: 1
+  # A rolling update would load a second copy of the weights onto the same
+  # iGPU and into the same node's RAM before releasing the first.
+  strategy:
+    type: Recreate
+  selector:
+    matchLabels:
+      app.kubernetes.io/name: llama-server
+  template:
+    metadata:
+      labels:
+        app.kubernetes.io/name: llama-server
+    spec:
+      securityContext:
+        runAsNonRoot: true
+        runAsUser: 1000
+        runAsGroup: 1000
+        # Makes the CephFS volume group-writable so the weights can be cached.
+        fsGroup: 1000
+        seccompProfile:
+          type: RuntimeDefault
+      containers:
+        - name: llama-server
+          image: ghcr.io/ggml-org/llama.cpp:server-vulkan-b10731
+          args:
+            # The one place this model is named; llama-server resolves the repo
+            # and downloads it itself, so there is nothing to keep in sync.
+            #
+            # A 35B mixture-of-experts with only ~3B parameters active per
+            # token. Decode on this hardware is bound by how many bytes are read
+            # per token rather than by parameter count, and this model reads
+            # ~1.85 GB/token where a dense 27B reads ~16.5 GB — so it is both
+            # far larger and faster than any dense model that would fit.
+            #
+            # Measured here (llama-bench, k8s-1, this image): tg128 11.59 tok/s,
+            # against 10.78 for a dense 8B. Prefill 120.9 t/s at 512 tokens and
+            # 69.8 at 16384 — a sublinear falloff, so the Gated Delta Net
+            # prefill collapse of llama.cpp#27638 does not occur on this stack.
+            - --hf-repo
+            - ggml-org/Qwen3.6-35B-A3B-GGUF:Q4_K_M
+            # Every layer on the Intel iGPU. Full offload matches CPU throughput
+            # while leaving the node's 14 cores free for the rest of the
+            # cluster; the iGPU is here for that isolation, not for a speed-up.
+            - --n-gpu-layers
+            - "99"
+            # Decode runs on the GPU, so extra threads buy nothing. At 11.59
+            # tok/s this model moves 21.4 GB/s against the 53.9 GB/s a dense
+            # model sustains here, so it is the iGPU's 96 EUs working through
+            # many small per-expert matmuls that sets the pace, not bandwidth.
+            - --threads
+            - "4"
+            # 16k rather than 8k because the measured prefill falloff is mild
+            # and this model's KV cache is unusually cheap — only 10 of its 40
+            # layers use full attention.
+            - --ctx-size
+            - "16384"
+            # A micro-batch of 2048 or more makes this Vulkan/Mesa stack fail
+            # with ErrorDeviceLost.
+            - --ubatch-size
+            - "1024"
+            # The server otherwise allows every CORS origin and warns about it
+            # at startup. Without this, any page a LAN browser visits could call
+            # this unauthenticated API from the user's machine. Consumers talk
+            # to it server-side; the WebUI is same-origin and unaffected.
+            - --cors-origins
+            - localhost
+            # Two names for one model. Without this the id is the whole
+            # --hf-repo string, which is unreadable in a model picker and in
+            # logs.
+            #
+            # Exactly one name, because a second one cannot be had usefully:
+            # llama-server keeps aliases in a sorted set and reports the first as
+            # the model's `id`, so with `chat` alongside this the picker always
+            # showed `chat` — in either flag order, since "chat" sorts first.
+            #
+            # Dropping it costs nothing. A second name would only be worth
+            # having as a stable handle for machine consumers, and there is
+            # nothing to stabilise: a single-model server ignores the request's
+            # `model` field entirely and answers to any string, verified against
+            # this endpoint. So no consumer config can break on a model swap,
+            # with or without an alias. The name exists purely to be advertised
+            # on /v1/models, which is what a client reads to build its picker.
+            - --alias
+            - qwen3.6-35b-a3b
+            # Qwen3.6 enables thinking by default. At ~11.6 tok/s that spends
+            # minutes reasoning before answering, and a request with a modest
+            # max_tokens returns an empty `content` with finish_reason "length"
+            # because the whole budget went to reasoning_content. Off by default
+            # keeps answers usable; a client that wants it can send
+            # chat_template_kwargs per request.
+            - --chat-template-kwargs
+            - '{"enable_thinking": false}'
+          env:
+            # Where --hf-repo caches the weights. Pointing it at the PVC makes
+            # the download a one-time cost, shared with llama-embed, and keeps
+            # the server off a home directory it cannot write as UID 1000.
+            - name: LLAMA_CACHE
+              value: /models
+          ports:
+            - name: http
+              containerPort: 8080
+          securityContext:
+            allowPrivilegeEscalation: false
+            capabilities:
+              drop:
+                - ALL
+          # Vulkan allocates the iGPU's working set from system RAM, and that
+          # counts against the pod's cgroup: a 5.2 GiB model measured 7.54 GiB
+          # RSS. Sized as the 19 GiB of weights plus that overhead, plus the KV
+          # cache — which is unusually cheap here, since only 10 of the 40
+          # layers use full attention.
+          resources:
+            requests:
+              cpu: 500m
+              memory: 24Gi
+              gpu.intel.com/i915: "1"
+            limits:
+              cpu: "6"
+              memory: 32Gi
+              gpu.intel.com/i915: "1"
+          # /health is 503 while the model loads and 200 once it is resident, so
+          # the pod only goes Ready when it can actually answer. On a cold PVC
+          # that includes pulling ~19 GiB from Hugging Face, hence the long
+          # startup budget (40 min); liveness takes over only after that.
+          startupProbe:
+            httpGet:
+              path: /health
+              port: http
+            periodSeconds: 10
+            failureThreshold: 240
+          readinessProbe:
+            httpGet:
+              path: /health
+              port: http
+            periodSeconds: 10
+          livenessProbe:
+            httpGet:
+              path: /health
+              port: http
+            periodSeconds: 30
+            timeoutSeconds: 10
+            failureThreshold: 6
+          volumeMounts:
+            - name: models
+              mountPath: /models
+      volumes:
+        - name: models
+          persistentVolumeClaim:
+            claimName: llama-server-models
+---
+apiVersion: v1
+kind: Service
+metadata:
+  name: llama-server
+  namespace: ai
+  labels:
+    app.kubernetes.io/name: llama-server
+spec:
+  selector:
+    app.kubernetes.io/name: llama-server
+  ports:
+    - name: http
+      port: 8080
+      targetPort: http
@@ -0,0 +1,119 @@
+---
+# The embedding endpoint, for RAG and semantic search.
+#
+# Deliberately separate from llama-server and deliberately not behind the
+# ingress: an embedding model has no generative training, and when it shares a
+# port with the chat model the built-in WebUI lists it as a choice. Selecting it
+# returns fluent nonsense rather than an error, because `--embeddings` does not
+# actually refuse chat completions. Keeping it on its own ClusterIP-only Service
+# is what makes it unselectable, since llama.cpp has no way to hide a model from
+# the picker.
+#
+# Reachable in-cluster at http://llama-embed.ai.svc.cluster.local:8080/v1/embeddings.
+apiVersion: apps/v1
+kind: Deployment
+metadata:
+  name: llama-embed
+  namespace: ai
+  labels:
+    app.kubernetes.io/name: llama-embed
+spec:
+  replicas: 1
+  strategy:
+    type: Recreate
+  selector:
+    matchLabels:
+      app.kubernetes.io/name: llama-embed
+  template:
+    metadata:
+      labels:
+        app.kubernetes.io/name: llama-embed
+    spec:
+      securityContext:
+        runAsNonRoot: true
+        runAsUser: 1000
+        runAsGroup: 1000
+        fsGroup: 1000
+        seccompProfile:
+          type: RuntimeDefault
+      containers:
+        - name: llama-embed
+          image: ghcr.io/ggml-org/llama.cpp:server-vulkan-b10731
+          args:
+            - --hf-repo
+            - Qwen/Qwen3-Embedding-0.6B-GGUF:Q8_0
+            # Serves POST /v1/embeddings.
+            - --embeddings
+            - --n-gpu-layers
+            - "99"
+            - --threads
+            - "2"
+            - --ctx-size
+            - "2048"
+            # No browser ever talks to this Service, so the WebUI is dead weight
+            # and one more unauthenticated surface.
+            - --no-webui
+          env:
+            # Same cache as llama-server, so the two share one copy of anything
+            # they have in common and neither re-downloads the other's weights.
+            - name: LLAMA_CACHE
+              value: /models
+          ports:
+            - name: http
+              containerPort: 8080
+          securityContext:
+            allowPrivilegeEscalation: false
+            capabilities:
+              drop:
+                - ALL
+          resources:
+            requests:
+              cpu: 250m
+              memory: 2Gi
+              gpu.intel.com/i915: "1"
+            limits:
+              cpu: "2"
+              memory: 4Gi
+              gpu.intel.com/i915: "1"
+          # ~600 MiB rather than ~5 GiB, so a much shorter budget than the chat
+          # model needs, but still sized for a cold download.
+          startupProbe:
+            httpGet:
+              path: /health
+              port: http
+            periodSeconds: 10
+            failureThreshold: 60
+          readinessProbe:
+            httpGet:
+              path: /health
+              port: http
+            periodSeconds: 10
+          livenessProbe:
+            httpGet:
+              path: /health
+              port: http
+            periodSeconds: 30
+            timeoutSeconds: 10
+            failureThreshold: 6
+          volumeMounts:
+            - name: models
+              mountPath: /models
+      volumes:
+        - name: models
+          persistentVolumeClaim:
+            claimName: llama-server-models
+---
+apiVersion: v1
+kind: Service
+metadata:
+  name: llama-embed
+  namespace: ai
+  labels:
+    app.kubernetes.io/name: llama-embed
+spec:
+  selector:
+    app.kubernetes.io/name: llama-embed
+  ports:
+    - name: http
+      port: 8080
+      targetPort: http
@@ -0,0 +1,23 @@
+---
+# ExternalName mirror so the ai-namespace Ingress can backend to the llama-gate
+# outpost that Authentik deploys into the authentik namespace (cross-namespace
+# Service references are not supported in a standard Ingress).
+#
+# Traffic path:
+#   browser → traefik (llm.renner.uno)
+#           → ak-outpost-llama-gate (ExternalName → authentik ns)
+#           → outpost validates the session + passkey step-up
+#           → http://llama-server.ai.svc.cluster.local:8080
+#
+# In-cluster consumers skip all of this and address llama-server directly.
+apiVersion: v1
+kind: Service
+metadata:
+  name: ak-outpost-llama-gate
+  namespace: ai
+spec:
+  type: ExternalName
+  externalName: ak-outpost-llama-gate.authentik.svc.cluster.local
+  ports:
+    - port: 9000
+      targetPort: 9000
@@ -0,0 +1,47 @@
+---
+# llm.renner.uno — the chat WebUI, public and behind Authentik.
+#
+# Traefik no longer reaches llama-server directly. This Ingress backends the
+# llama-gate proxy outpost (ExternalName → authentik ns), which enforces a
+# passkey step-up and forwards only after the session validates. The ai
+# CiliumNetworkPolicy is tightened so ONLY that outpost pod may reach
+# llama-server, so nothing in the cluster can route around the gate. Pattern
+# mirrors kubernetes/apps/home-assistant/vscode-ingress.yaml.
+#
+# The gate is the entire access control here: llama-server has no
+# authentication of its own and serves a full OpenAI-compatible API on the same
+# port as the UI. That is what kept this hostname LAN-only until now.
+#
+# In-cluster consumers — Home Assistant, Paperless, CI — address
+# llama-server.ai.svc.cluster.local:8080 directly and never pass through
+# Traefik or the outpost, so they need no credentials and are unaffected by the
+# gate.
+apiVersion: networking.k8s.io/v1
+kind: Ingress
+metadata:
+  name: llama-server
+  namespace: ai
+  labels:
+    # Public: Cloudflare wildcard → tunnel → NetBird proxy → Traefik. The UDM
+    # external-dns instance skips anything carrying this, and LAN clients reach
+    # the same hostname through the hairpin NAT.
+    dns.renner.uno/public: "true"
+  annotations:
+    cert-manager.io/cluster-issuer: letsencrypt-cluster
+spec:
+  ingressClassName: traefik
+  tls:
+    - hosts:
+        - llm.renner.uno
+      secretName: llama-server-tls
+  rules:
+    - host: llm.renner.uno
+      http:
+        paths:
+          - path: /
+            pathType: Prefix
+            backend:
+              service:
+                name: ak-outpost-llama-gate
+                port:
+                  number: 9000
@@ -0,0 +1,8 @@
+apiVersion: kustomize.config.k8s.io/v1beta1
+kind: Kustomization
+resources:
+  - pvc.yaml
+  - deployment.yaml
+  - embed.yaml
+  - gate-service.yaml
+  - ingress.yaml
@@ -0,0 +1,21 @@
+---
+# Holds the GGUF weights, downloaded once by the Deployment's initContainer.
+# Prune-disabled so retiring this Kustomization does not throw away several
+# GiB of model files that would have to be pulled from Hugging Face again.
+#
+# ReadWriteMany so a second replica or a one-off benchmark Job can mount the
+# same weights; the models are read-only at inference time.
+apiVersion: v1
+kind: PersistentVolumeClaim
+metadata:
+  name: llama-server-models
+  namespace: ai
+  annotations:
+    kustomize.toolkit.fluxcd.io/prune: disabled
+spec:
+  accessModes:
+    - ReadWriteMany
+  storageClassName: ceph-filesystem
+  resources:
+    requests:
+      storage: 40Gi
@@ -5,9 +5,8 @@ metadata:
  namespace: monitoring
  labels:
    app.kubernetes.io/name: alloy
-    # kube-prometheus-stack's Prometheus resource selects ServiceMonitors
-    # by this label; without it the resource exists but is never
-    # discovered.
+    # Not required for discovery — serviceMonitorSelector is empty — but kept
+    # for consistency with the other monitors.
    release: kube-prometheus-stack
 spec:
  selector:
@@ -1,7 +1,8 @@
 # Scrape the CNPG Postgres instances (port 9187, built-in exporter).
-# CNPG's own enablePodMonitor would generate PodMonitors without the
-# `release: kube-prometheus-stack` label, which this Prometheus requires
-# (podMonitorSelector), so we define them here instead.
+# Defined here rather than via CNPG's own enablePodMonitor so the scrape
+# config lives with the other monitors. The `release` label below is not
+# required for discovery — podMonitorSelector is empty — but kept for
+# consistency.
 apiVersion: monitoring.coreos.com/v1
 kind: PodMonitor
 metadata:
@@ -5,9 +5,8 @@ metadata:
  namespace: home-assistant
  labels:
    app.kubernetes.io/name: home-assistant
-    # kube-prometheus-stack's Prometheus resource selects ServiceMonitors
-    # by this label; without it the resource exists but is never
-    # discovered. Same trap the garage PrometheusRule documents.
+    # Not required for discovery — serviceMonitorSelector is empty — but kept
+    # for consistency with the other monitors.
    release: kube-prometheus-stack
 spec:
  selector:
@@ -4,13 +4,15 @@ kind: Kustomization
 # come from the kube-prometheus-stack chart. Flux applies this Kustomization
 # only after `monitoring` is Ready (chart installed → CRDs present).
 resources:
+  - prometheusrule-blackbox.yaml
  - prometheusrule-ceph.yaml
+  - prometheusrule-ci-openbao.yaml
  - prometheusrule-cilium.yaml
+  - prometheusrule-disk-wear.yaml
  - prometheusrule-hetzner-backup.yaml
  - prometheusrule-loki.yaml
  - prometheusrule-mariadb-backup.yaml
  - prometheusrule-netbird-availability.yaml
-  - prometheusrule-netbird-backup.yaml
  - prometheusrule-netbird-ingress.yaml
  - prometheusrule-openbao.yaml
  - prometheusrule-velero.yaml
@@ -24,4 +26,5 @@ resources:
  - home-assistant-servicemonitor.yaml
  - immich-servicemonitor.yaml
  - loki-servicemonitor.yaml
+  - smartctl-exporter-servicemonitor.yaml
  - probes-blackbox.yaml
@@ -5,9 +5,8 @@ metadata:
  namespace: monitoring
  labels:
    app.kubernetes.io/name: loki
-    # kube-prometheus-stack's Prometheus resource selects ServiceMonitors
-    # by this label; without it the resource exists but is never
-    # discovered.
+    # Not required for discovery — serviceMonitorSelector is empty — but kept
+    # for consistency with the other monitors.
    release: kube-prometheus-stack
 spec:
  # Matches the `loki` (single-binary) and `loki-canary` services, but
@@ -1,5 +1,9 @@
 # HTTP probes — fan out to blackbox-exporter. Probe targets mirror the
 # legacy Ansible role's blackbox_http_targets list.
+#
+# The `release` label on every Probe here IS load-bearing: probeSelector still
+# matches on it, unlike serviceMonitorSelector and podMonitorSelector, which
+# are empty. Removing it silently stops the probe from being discovered.
 apiVersion: monitoring.coreos.com/v1
 kind: Probe
 metadata:
@@ -45,6 +49,28 @@ spec:
        # ports outside the hairpin's 80/443 — real WAN path.
        - http://proxy-1.renner.uno:9000/health
        - http://proxy-2.renner.uno:9000/health
+        # Woodpecker. Ungated, root returns 200 with no redirect. Every
+        # scheduled job in this repo runs here — the alert-monitor cron, the
+        # nightly scans, the deploy targets — so an outage here is silent by
+        # construction: the thing that would have told you is the thing that
+        # is down.
+        - https://ci.renner.uno
+        # OpenBao. Probes the health API rather than the UI on purpose: a
+        # SEALED instance still serves the UI (307 -> /ui/ -> 200) while every
+        # ExternalSecret in the cluster fails, which is exactly the
+        # green-while-broken shape this file warns about elsewhere.
+        #
+        # standbyok=true because the endpoint answers 200 only on the ACTIVE
+        # node and 429 on a standby — the external route currently lands on a
+        # standby, so the bare path would be permanently red. With the
+        # parameter, 200 means initialized, unsealed and serving, on whichever
+        # node answers; 503 sealed and 501 uninitialized both stay red.
+        - https://openbao.renner.uno/v1/sys/health?standbyok=true
+        # ical-proxy serves an unauthenticated /health that answers 200 with
+        # {"status":"healthy"}. Unlike the gated hostnames this is real app
+        # health, not reachability — the root path returns 404 by design, since
+        # the service only answers on calendar paths.
+        - https://ical-proxy.renner.uno/health
        # APP-HEALTH probes for the gated monitoring UIs, from the correct
        # in-cluster vantage (monitoring-vantage-point-rule): the gate is
        # only on the ingress, so the ClusterIP /-/healthy endpoints are
@@ -57,6 +83,11 @@ spec:
        # external reachability probe above; it is not the health vantage.)
        - http://kube-prometheus-stack-alertmanager.monitoring.svc.cluster.local:9093/-/healthy
        - http://kube-prometheus-stack-prometheus.monitoring.svc.cluster.local:9090/-/healthy
+        # Loki has no external vantage at all: its ingress requires auth on
+        # every path, so an outside probe can only ever report 401. In-cluster
+        # /ready answers 200 unauthenticated and is in this namespace, so the
+        # same intra-namespace allowance the two above rely on covers it.
+        - http://loki.monitoring.svc.cluster.local:3100/ready
 # WAN-path probes of the public edge BY PROXY IP. The name-based
 # home.renner.uno probe above resolves in-cluster (CoreDNS/k8s_gateway)
 # and never leaves the LAN — the vantage-point blind spot that let the
@@ -0,0 +1,59 @@
+apiVersion: monitoring.coreos.com/v1
+kind: PrometheusRule
+metadata:
+  name: blackbox
+  namespace: monitoring
+  labels:
+    # kube-prometheus-stack's Prometheus resource selects on this label;
+    # without it the rule is created but never loaded into Prometheus.
+    release: kube-prometheus-stack
+spec:
+  groups:
+    - name: blackbox.rules
+      rules:
+        # Catch-all for every blackbox-http target that has no rule of its own.
+        # Before this existed, a target could be probed, graphed and completely
+        # unalerted — which is how file.renner.uno served 502 for months.
+        #
+        # THE EXCLUSION LIST AND THE DEDICATED RULES ARE ONE INVARIANT: an
+        # instance belongs here only while a rule elsewhere covers it, and
+        # adding a dedicated rule means adding its instance here. Get it wrong
+        # in one direction and the alert fires twice; wrong in the other and it
+        # never fires at all. Currently excluded:
+        #
+        #   fsn1.your-objectstorage.com   HetznerBackupEndpointDown (critical)
+        #   netbird.renner.uno            prometheusrule-netbird-availability
+        #   proxy-1/2:9000/health         same file, relay redundancy
+        #   ci.renner.uno                 WoodpeckerDown
+        #   openbao .../sys/health        OpenBaoUnavailable
+        #
+        # Warning, not critical, on purpose: this rule cannot know what a given
+        # target means. A target whose loss deserves a critical page gets its
+        # own rule — and lands in the list above. That is what keeps the
+        # exclusion list from being arbitrary.
+        - alert: BlackboxProbeFailing
+          expr: probe_success{job="blackbox-http", instance!~"https://fsn1\\.your-objectstorage\\.com|https://netbird\\.renner\\.uno|http://proxy-[12]\\.renner\\.uno:9000/health|https://ci\\.renner\\.uno|https://openbao\\.renner\\.uno/v1/sys/health.*"} == 0
+          for: 10m
+          annotations:
+            summary: "Blackbox probe of {{ $labels.instance }} has been failing for 10 minutes"
+            description: >-
+              The endpoint is not answering as expected. For the Authentik-gated
+              hostnames this is a reachability check covering DNS, TLS, Traefik
+              and the gate outpost — it says nothing about the app behind the
+              gate, which the internal /-/healthy probes cover separately.
+          labels:
+            severity: warning
+        # The check that the checks are running. Every rule above reads
+        # probe_success; if the series stop being produced at all, none of them
+        # can fire and the silence looks exactly like health.
+        - alert: BlackboxProbesAbsent
+          expr: absent(probe_success{job="blackbox-http"})
+          for: 15m
+          annotations:
+            summary: "No blackbox-http probe results are reaching Prometheus"
+            description: >-
+              Either the blackbox exporter is down or the Probe objects stopped
+              being discovered. Every endpoint alert depends on this job, so
+              they are all blind until it returns.
+          labels:
+            severity: critical
@@ -0,0 +1,47 @@
+apiVersion: monitoring.coreos.com/v1
+kind: PrometheusRule
+metadata:
+  name: ci-openbao
+  namespace: monitoring
+  labels:
+    # kube-prometheus-stack's Prometheus resource selects on this label;
+    # without it the rule is created but never loaded into Prometheus.
+    release: kube-prometheus-stack
+spec:
+  groups:
+    - name: ci-openbao.rules
+      rules:
+        - alert: WoodpeckerDown
+          # Probe target defined in probes-blackbox.yaml. Root, ungated, 200.
+          expr: probe_success{job="blackbox-http", instance="https://ci.renner.uno"} == 0
+          for: 5m
+          labels:
+            severity: warning
+          annotations:
+            summary: "Woodpecker is not answering on ci.renner.uno"
+            description: >-
+              Every scheduled job in this repo runs here: the alert-monitor
+              cron that files these issues, the nightly scans, and every deploy
+              target. Nothing else reports this outage, because the component
+              that would have reported it is the one that is down. Alertmanager
+              itself is unaffected, which is why this alert exists.
+        - alert: OpenBaoUnavailable
+          # Probes /v1/sys/health?standbyok=true — 200 on any unsealed node,
+          # 503 sealed, 501 uninitialized. The UI stays up when sealed, so a
+          # root probe would not catch this.
+          #
+          # Matched by prefix rather than the full string: the target carries a
+          # query parameter, and an exact match would break silently if the
+          # instance label ever encodes it differently.
+          expr: probe_success{job="blackbox-http", instance=~"https://openbao\\.renner\\.uno/v1/sys/health.*"} == 0
+          for: 5m
+          labels:
+            severity: critical
+          annotations:
+            summary: "OpenBao is sealed, uninitialized or unreachable"
+            description: >-
+              Every ExternalSecret in the cluster resolves through OpenBao.
+              Existing Secrets keep working, so nothing breaks at once — the
+              damage shows up at the next refresh interval or the next pod that
+              needs a fresh credential. Check whether it is sealed before
+              assuming a network fault.
@@ -11,25 +11,22 @@ spec:
  groups:
    - name: cnpg-backup.rules
      rules:
-        # WHY THIS FILE EXISTS
-        # Seven Postgres clusters back up to Hetzner and NOTHING alerted if that
-        # stopped. The only related rule was HetznerBackupEndpointDown, which
-        # probes the S3 endpoint — it proves the bucket is reachable, not that
-        # anything was written to it. Same failure shape as the WordPress backup
-        # that failed nightly for three days against a bucket that was declared
-        # in tofu but never applied: the status surface looked fine because
-        # nothing checked the thing that mattered.
+        # The Postgres clusters back up to Hetzner. HetznerBackupEndpointDown
+        # probes that S3 endpoint, which proves the bucket is reachable and
+        # nothing more — these two rules check that something is actually being
+        # written to it.

        - alert: CNPGWalArchiveBacklog
          # `ready` counts WAL segments sitting in pg_wal/archive_status waiting
-          # to be archived. Steady state is 0 across every cluster (verified
-          # 2026-08-19). A sustained backlog means the archiver is failing:
-          # point-in-time recovery is silently broken from that moment, and
-          # pg_wal keeps growing until it fills the PVC and takes Postgres down.
+          # to be archived. Steady state is 0. A sustained backlog means the
+          # archiver is failing: point-in-time recovery is silently broken from
+          # that moment, and pg_wal keeps growing until it fills the PVC and
+          # takes Postgres down.
          #
-          # This is the load-bearing alert of the two. It depends only on the
-          # instance-level collector, so unlike the backup-age metrics below it
-          # is unaffected by the missing Backup CRs (#522).
+          # This is the load-bearing alert of the two. It reads the
+          # instance-level collector directly, so unlike the backup-age metric
+          # discussed below it does not depend on Cluster status being
+          # populated.
          #
          # Threshold: >5 segments sustained for 30m. Brief non-zero values are
          # normal under write bursts — a segment is 16 MiB, so 5 is roughly
@@ -63,16 +60,17 @@ spec:
        #
        # The natural expression is
        #   (time() - cnpg_collector_last_available_backup_timestamp) > 48*3600
-        # and it CANNOT be used today: that metric reads exactly 0 on every
-        # instance in the cluster (verified 2026-08-19 across gf-pg, ak-pg-1/2,
-        # pprl-pg-2/3, im-pg, wp-pg, ha-pg). CNPG has no record of any
-        # successful backup anywhere, because the Backup CRs it derives that
-        # from are being deleted within a minute of completing — see #522.
+        # and it cannot be used, because that metric reads exactly 0 on every
+        # instance. The collector derives it from `Cluster.status
+        # .lastSuccessfulBackup`, and that field is absent on every Cluster
+        # here: all of them back up with `method: plugin` (barman-cloud), and
+        # the plugin path does not write it back.
        #
-        # Backups themselves DO work; that was verified independently by
-        # listing the bucket with barman-cloud-backup-list and restoring a WAL
-        # segment back out of S3. The gap is in the record, not the data.
+        # The backups themselves run and are retained — completed Backup CRs
+        # going back weeks exist for every scheduled cluster. The gap is in the
+        # status field the metric reads, not in the data.
        #
-        # Adding the rule now would fire permanently for all seven clusters and
-        # be silenced within a day, which is worse than not having it. Add it as
-        # part of resolving #522, once the metric reflects reality.
+        # Adding the rule against that metric would fire permanently for every
+        # cluster, which is worse than not having it. Either the plugin starts
+        # populating the field, or the alert has to be built on the Backup CRs
+        # directly, which Prometheus does not see today.
@@ -0,0 +1,125 @@
+apiVersion: monitoring.coreos.com/v1
+kind: PrometheusRule
+metadata:
+  name: disk-wear
+  namespace: monitoring
+  labels:
+    # kube-prometheus-stack's Prometheus resource selects on this label;
+    # without it the rule is created but never loaded into Prometheus.
+    release: kube-prometheus-stack
+spec:
+  groups:
+    - name: disk-wear.rules
+      rules:
+        # Wear percentages are self-reported: 100 means the rated endurance is
+        # spent, not that the drive stops.
+        #
+        # Wear alone is not a signal. It only ever rises, so a plain threshold
+        # starts firing the day a drive crosses it and never stops — a status
+        # dressed as an alert (#673, #675, #682, #686 were all one drive set
+        # crossing 80%). What matters is wear that is high AND still climbing,
+        # so the alert below is a projection: at the write rate of the last
+        # week, when does this drive reach 95%?
+        #
+        # The rate is self-calibrating. Each drive reports both its lifetime
+        # bytes written and its own wear percentage, so bytes-per-percent comes
+        # from the drive itself and no rated-endurance table has to be kept in
+        # sync with the hardware. percentage_used is a whole-number percent and
+        # advances only every few weeks here, which is far too coarse to
+        # differentiate; bytes_written moves on every scrape.
+        - alert: NvmeDriveWearProjectedExhaustion
+          # The >= 80 gate is numerical, not editorial: bytes-per-percent is
+          # derived by dividing by an integer percentage, so on a lightly worn
+          # drive a half-percent rounding error swings the projection by tens
+          # of percent. Above 80 the same rounding is under one percent.
+          # Idle drives divide by a zero rate and yield +Inf, which is not < the
+          # threshold, so they stay silent on their own.
+          expr: >-
+            (
+              (95 - smartctl_device_percentage_used)
+              /
+              (
+                rate(smartctl_device_bytes_written[7d]) * 86400
+                  * smartctl_device_percentage_used
+                  / smartctl_device_bytes_written
+              )
+            ) < 180
+            and smartctl_device_percentage_used >= 80
+          # Long, because a projection off a 7d rate should not react to a day.
+          for: 6h
+          labels:
+            severity: warning
+          annotations:
+            summary: "NVMe {{ $labels.device }} on {{ $labels.instance }} projects to 95% wear in {{ $value | printf \"%.0f\" }} days"
+            description: >-
+              The drive is past 80% of its rated endurance and the write rate
+              of the last week would spend the rest within six months. This is
+              a lead-time warning, not a fault: decide whether to replace the
+              drive or move what is writing to it. The Disk Health dashboard
+              shows which drives carry which role.
+        # Kept as a flat threshold on purpose: past rated endurance the drive
+        # runs outside what the manufacturer stands behind regardless of how
+        # fast it got there, and the alert clears by replacing it.
+        - alert: NvmeDriveWearCritical
+          expr: smartctl_device_percentage_used >= 95
+          for: 1h
+          labels:
+            severity: critical
+          annotations:
+            summary: "NVMe {{ $labels.device }} on {{ $labels.instance }} is at {{ $value }}% rated wear"
+            description: >-
+              The drive is at or past the end of its rated endurance. It will
+              likely keep working for a while, but it is now operating outside
+              what the manufacturer stands behind, and replacement should be
+              scheduled rather than considered.
+        # Wear is a budget; spare exhaustion is damage.
+        - alert: NvmeDriveSpareExhausted
+          expr: smartctl_device_available_spare <= smartctl_device_available_spare_threshold
+          for: 15m
+          labels:
+            severity: critical
+          annotations:
+            summary: "NVMe {{ $labels.device }} on {{ $labels.instance }} has exhausted its spare area"
+            description: >-
+              Available spare has fallen to the manufacturer's threshold. The
+              drive has run out of reserve blocks to remap failures into.
+              Replace it.
+        - alert: NvmeDriveCriticalWarning
+          expr: smartctl_device_critical_warning > 0
+          for: 5m
+          labels:
+            severity: critical
+          annotations:
+            summary: "NVMe {{ $labels.device }} on {{ $labels.instance }} reports critical warning {{ $value }}"
+            description: >-
+              The drive has raised its own critical warning flag. Read the
+              detail with `smartctl -a` on the node; the value is a bitfield,
+              not a count.
+        - alert: NvmeDriveMediaErrors
+          # On the increase, not the total: pre-existing errors would otherwise
+          # alert forever. Standing counts are visible on the dashboard only.
+          expr: increase(smartctl_device_media_errors[6h]) > 0
+          for: 5m
+          labels:
+            severity: warning
+          annotations:
+            summary: "NVMe {{ $labels.device }} on {{ $labels.instance }} recorded {{ $value }} new media errors"
+            description: >-
+              The drive reported unrecoverable data-integrity errors in the
+              last six hours. A healthy drive never increments this. Check
+              whether Ceph has logged scrub errors on the same node.
+        # The check that the checks are running: no series fires no alert.
+        # Counted against node-exporter's inventory, not a fixed fleet size.
+        - alert: SmartctlExporterIncomplete
+          expr: count(smartctl_device_percentage_used) < count(node_nvme_info) or absent(smartctl_device_percentage_used)
+          for: 30m
+          labels:
+            severity: warning
+          annotations:
+            summary: "Fewer NVMe drives report SMART than node-exporter can see"
+            description: >-
+              Some drives visible to node-exporter are not reporting SMART, or
+              none are. Either a DaemonSet pod is down or a drive stopped
+              answering — both mean the wear alerts above have stopped watching
+              part of the fleet, which looks identical to everything being
+              fine.
@@ -17,11 +17,12 @@ spec:
          # drains on recovery) and Velero backups fail. Replaces the old
          # GarageDown alert now that backups live on Hetzner, not nas-1.
          #
-          # CNPG has no metric-based archiving alert yet — its pod metrics
-          # are not scraped (enablePodMonitor=false). Enabling CNPG
-          # PodMonitors for a granular "archiving falling behind" alert is
-          # a follow-up. Velero's own VeleroBackupValidationFailure /
-          # VeleroBackupStale rules already cover backup-level failures.
+          # The granular counterpart is CNPGWalArchiveBacklog in
+          # prometheusrule-cnpg-backup.yaml, reading the instance collector
+          # scraped by cnpg-podmonitors.yaml: this alert says the target is
+          # unreachable, that one says archiving is falling behind whatever the
+          # cause. Velero's VeleroBackupValidationFailure / VeleroBackupStale
+          # cover backup-level failures.
          expr: probe_success{instance="https://fsn1.your-objectstorage.com"} == 0
          for: 10m
          labels:
@@ -1,44 +0,0 @@
-apiVersion: monitoring.coreos.com/v1
-kind: PrometheusRule
-metadata:
-  name: netbird-backup
-  namespace: monitoring
-  labels:
-    # kube-prometheus-stack's Prometheus selects on this label.
-    release: kube-prometheus-stack
-spec:
-  groups:
-    - name: netbird-backup.rules
-      rules:
-        - alert: NetbirdVpsBackupStale
-          # The nightly pull of the controller VPS's management store
-          # hasn't succeeded in over 26 h (one missed cycle + slack).
-          # This dump is the only copy of the mesh state (peers, setup
-          # keys, routes) that survives losing the Hetzner VPS — a
-          # silently dead backup is exactly the failure mode the SPOF
-          # assessment flagged.
-          expr: |
-            time() - kube_cronjob_status_last_successful_time{namespace="netbird-backup", cronjob="netbird-vps-backup"} > 26 * 3600
-          for: 30m
-          labels:
-            severity: critical
-          annotations:
-            summary: "NetBird VPS backup has not succeeded in 26h+"
-            description: "The netbird-vps-backup CronJob's last successful run is over 26 hours old. Check the job logs in the netbird-backup namespace (ssh reachability of netbird.renner.uno, the netbird-backup-ssh ExternalSecret, PVC space)."
-
-        - alert: NetbirdVpsBackupNeverRan
-          # The CronJob exists but has never succeeded — most likely the
-          # one-time OpenBao provisioning step
-          # (bao kv put homelab/infrastructure/netbird-backup ssh-key=@…)
-          # hasn't been done, so the ExternalSecret cannot sync and the
-          # job pod fails on the missing secret mount.
-          expr: |
-            kube_cronjob_created{namespace="netbird-backup", cronjob="netbird-vps-backup"}
-            unless
-            kube_cronjob_status_last_successful_time{namespace="netbird-backup", cronjob="netbird-vps-backup"}
-          for: 6h
-          labels:
-            severity: warning
-          annotations:
-            summary: "NetBird VPS backup has never succeeded"
-            description: "The netbird-vps-backup CronJob exists but has no successful run. If this is the initial rollout: the private key must be provisioned once by hand — bao kv put homelab/infrastructure/netbird-backup ssh-key=@<keyfile> — before the ExternalSecret can sync."
@@ -0,0 +1,24 @@
+apiVersion: monitoring.coreos.com/v1
+kind: ServiceMonitor
+metadata:
+  name: smartctl-exporter
+  namespace: monitoring
+  labels:
+    app.kubernetes.io/name: smartctl-exporter
+    # Not required for discovery — serviceMonitorSelector is empty — but kept
+    # for consistency with the other monitors.
+    release: kube-prometheus-stack
+spec:
+  selector:
+    matchLabels:
+      app.kubernetes.io/name: smartctl-exporter
+  endpoints:
+    # smartctl polls the drives every 60s; scraping faster gains nothing.
+    - port: http-metrics
+      path: /metrics
+      interval: 60s
+      relabelings:
+        # Without this a series carries only the exporter pod's IP, which does
+        # not identify the machine the drive is in.
+        - sourceLabels: [__meta_kubernetes_pod_node_name]
+          targetLabel: node
@@ -1,6 +1,6 @@
 {
  "annotations": {"list": []},
-  "description": "NVMe throughput, latency and temperature per node. Every panel joins node_disk_* to node_nvme_info and node_uname_info on purpose: device names are NOT stable across nodes (nvme0 is the Kingston system disk on k8s-1 and k8s-3, but the Crucial on k8s-2), so a legend keyed on the device alone compares different hardware. Endurance/wear is deliberately absent — see the note at the bottom and issue #549.",
+  "description": "NVMe health and performance per node. The top row answers 'is anything wrong'; the graphs below answer 'why'. Panels resolve each drive through node_nvme_info and node_uname_info rather than plotting the Linux device name, because NVMe enumeration order is not guaranteed to agree across machines — the same name can be a different drive on the next node. Which drive currently holds which role is in the inventory table, deliberately not in this text. Endurance comes from smartctl_exporter, whose series are labelled by node rather than by the exporter pod's IP — see the note at the bottom for what it still cannot tell you.",
  "editable": true,
  "fiscalYearStartMonth": 0,
  "graphTooltip": 1,
@@ -9,7 +9,89 @@
  "panels": [
    {
      "datasource": {"type": "prometheus", "uid": "prometheus"},
-      "description": "Which physical drive is which, resolved live rather than written down. The OSD column comes from ceph_disk_occupation, so it follows Rook instead of restating a device list that would go stale the next time a drive is swapped.",
+      "description": "Ceph's overall verdict. A HEALTH_WARN is frequently raised by something unrelated to the drives, so read the detail before treating it as a storage problem.",
+      "fieldConfig": {
+        "defaults": {
+          "color": {"mode": "thresholds"},
+          "mappings": [{"options": {"0": {"color": "green", "index": 0, "text": "HEALTH_OK"}, "1": {"color": "orange", "index": 1, "text": "HEALTH_WARN"}, "2": {"color": "red", "index": 2, "text": "HEALTH_ERR"}}, "type": "value"}],
+          "thresholds": {"mode": "absolute", "steps": [{"color": "green", "value": null}, {"color": "orange", "value": 1}, {"color": "red", "value": 2}]},
+          "unit": "short"
+        },
+        "overrides": []
+      },
+      "gridPos": {"h": 4, "w": 5, "x": 0, "y": 0},
+      "id": 10,
+      "options": {"colorMode": "background", "graphMode": "none", "justifyMode": "auto", "orientation": "auto", "reduceOptions": {"calcs": ["lastNotNull"], "fields": "", "values": false}, "textMode": "auto"},
+      "targets": [{"datasource": {"type": "prometheus", "uid": "prometheus"}, "expr": "ceph_health_status", "legendFormat": "", "refId": "A"}],
+      "title": "Ceph health",
+      "type": "stat"
+    },
+    {
+      "datasource": {"type": "prometheus", "uid": "prometheus"},
+      "description": "OSDs the cluster knows about but which are not up. Should read zero. Counted as a difference against ceph_osd_metadata rather than compared to a fixed number, so adding or removing an OSD does not turn this panel into a false alarm. An OSD that is up but out shows as a Ceph health warning instead — it is a state, not a fault, and it does not belong in a red-or-green box.",
+      "fieldConfig": {
+        "defaults": {
+          "color": {"mode": "thresholds"},
+          "mappings": [],
+          "thresholds": {"mode": "absolute", "steps": [{"color": "green", "value": null}, {"color": "red", "value": 1}]},
+          "unit": "short"
+        },
+        "overrides": []
+      },
+      "gridPos": {"h": 4, "w": 5, "x": 5, "y": 0},
+      "id": 11,
+      "options": {"colorMode": "background", "graphMode": "none", "justifyMode": "auto", "orientation": "auto", "reduceOptions": {"calcs": ["lastNotNull"], "fields": "", "values": false}, "textMode": "auto"},
+      "targets": [
+        {"datasource": {"type": "prometheus", "uid": "prometheus"}, "expr": "sum(ceph_osd_metadata) - sum(ceph_osd_up)", "legendFormat": "", "refId": "A"}
+      ],
+      "title": "OSDs down",
+      "type": "stat"
+    },
+    {
+      "datasource": {"type": "prometheus", "uid": "prometheus"},
+      "description": "Raw Ceph capacity in use. The cluster average is the optimistic number: Ceph stops writing when a single OSD crosses the full ratio, so per-OSD headroom is what actually bites.",
+      "fieldConfig": {
+        "defaults": {
+          "color": {"mode": "thresholds"},
+          "mappings": [],
+          "max": 1,
+          "min": 0,
+          "thresholds": {"mode": "absolute", "steps": [{"color": "green", "value": null}, {"color": "orange", "value": 0.75}, {"color": "red", "value": 0.85}]},
+          "unit": "percentunit"
+        },
+        "overrides": []
+      },
+      "gridPos": {"h": 4, "w": 5, "x": 10, "y": 0},
+      "id": 12,
+      "options": {"colorMode": "background", "graphMode": "area", "justifyMode": "auto", "orientation": "auto", "reduceOptions": {"calcs": ["lastNotNull"], "fields": "", "values": false}, "textMode": "auto"},
+      "targets": [{"datasource": {"type": "prometheus", "uid": "prometheus"}, "expr": "ceph_cluster_total_used_bytes / ceph_cluster_total_bytes", "legendFormat": "", "refId": "A"}],
+      "title": "Ceph capacity used",
+      "type": "stat"
+    },
+    {
+      "datasource": {"type": "prometheus", "uid": "prometheus"},
+      "description": "Fullest EPHEMERAL volume across the fleet — Talos's /var. Its contents are meant to be disposable: container images, kubelet state and pod scratch all rebuild. Filling it is still a problem, because a node with no room to write stops being useful long before anything is lost, and nothing rebalances /var the way Ceph rebalances a full OSD.",
+      "fieldConfig": {
+        "defaults": {
+          "color": {"mode": "thresholds"},
+          "mappings": [],
+          "max": 1,
+          "min": 0,
+          "thresholds": {"mode": "absolute", "steps": [{"color": "green", "value": null}, {"color": "orange", "value": 0.7}, {"color": "red", "value": 0.85}]},
+          "unit": "percentunit"
+        },
+        "overrides": []
+      },
+      "gridPos": {"h": 4, "w": 5, "x": 15, "y": 0},
+      "id": 13,
+      "options": {"colorMode": "background", "graphMode": "area", "justifyMode": "auto", "orientation": "auto", "reduceOptions": {"calcs": ["lastNotNull"], "fields": "", "values": false}, "textMode": "auto"},
+      "targets": [{"datasource": {"type": "prometheus", "uid": "prometheus"}, "expr": "max(1 - node_filesystem_avail_bytes{mountpoint=\"/var\"} / node_filesystem_size_bytes{mountpoint=\"/var\"})", "legendFormat": "", "refId": "A"}],
+      "title": "EPHEMERAL used (worst node)",
+      "type": "stat"
+    },
+    {
+      "datasource": {"type": "prometheus", "uid": "prometheus"},
+      "description": "Which physical drive is which, resolved live rather than written down — this table is the answer to 'what is in the machines', so that no panel description has to be. The OSD column is joined from ceph_disk_occupation, so it follows Rook; a drive with no OSD is carrying either the system disk or EPHEMERAL.",
      "fieldConfig": {
        "defaults": {
          "color": {"mode": "thresholds"},
@@ -19,27 +101,121 @@
        },
        "overrides": []
      },
-      "gridPos": {"h": 9, "w": 24, "x": 0, "y": 0},
+      "gridPos": {"h": 9, "w": 24, "x": 0, "y": 4},
      "id": 1,
      "options": {"cellHeight": "sm", "footer": {"countRows": false, "fields": "", "reducer": ["sum"], "show": false}, "showHeader": true, "sortBy": [{"desc": false, "displayName": "node"}]},
      "targets": [
        {
          "datasource": {"type": "prometheus", "uid": "prometheus"},
-          "expr": "node_nvme_info * on (instance) group_left(nodename) node_uname_info",
+          "expr": "(label_replace(node_nvme_info * on (instance) group_left(nodename) node_uname_info, \"nvmedev\", \"$1\", \"device\", \"(nvme[0-9]+)\") * on (nodename, nvmedev) group_left(ceph_daemon) label_replace(label_replace(ceph_disk_occupation, \"nodename\", \"$1\", \"instance\", \"(.*)\"), \"nvmedev\", \"$1\", \"devices\", \"(nvme[0-9]+)n[0-9]+\")) or (label_replace(node_nvme_info * on (instance) group_left(nodename) node_uname_info, \"nvmedev\", \"$1\", \"device\", \"(nvme[0-9]+)\") unless on (nodename, nvmedev) label_replace(label_replace(ceph_disk_occupation, \"nodename\", \"$1\", \"instance\", \"(.*)\"), \"nvmedev\", \"$1\", \"devices\", \"(nvme[0-9]+)n[0-9]+\"))",
          "format": "table",
          "instant": true,
          "legendFormat": "",
          "refId": "A"
        }
      ],
-      "title": "Drive inventory",
+      "title": "Drive inventory (identity and role)",
      "transformations": [
        {
          "id": "organize",
          "options": {
-            "excludeByName": {"Time": true, "Value": true, "__name__": true, "cntlid": true, "container": true, "endpoint": true, "instance": true, "job": true, "namespace": true, "pod": true, "service": true, "domainname": true, "machine": true, "release": true, "sysname": true, "version": true, "state": true},
+            "excludeByName": {"Time": true, "Value": true, "__name__": true, "cntlid": true, "container": true, "endpoint": true, "instance": true, "job": true, "namespace": true, "pod": true, "service": true, "domainname": true, "machine": true, "release": true, "sysname": true, "version": true, "state": true, "nvmedev": true},
            "indexByName": {},
-            "renameByName": {"nodename": "node", "device": "device", "model": "model", "serial": "serial", "firmware_revision": "firmware"}
+            "renameByName": {"nodename": "node", "device": "device", "model": "model", "serial": "serial", "firmware_revision": "firmware", "ceph_daemon": "ceph OSD"}
+          }
+        }
+      ],
+      "type": "table"
+    },
+    {
+      "datasource": {"type": "prometheus", "uid": "prometheus"},
+      "description": "Rated endurance consumed, worst drive in the fleet. This is the drive's own accounting against what the manufacturer warrants, not a failure prediction — a drive past 100 usually keeps working and starts eating its spare area. Read it for planning; read the SMART table for whether anything is failing now.",
+      "fieldConfig": {
+        "defaults": {
+          "color": {"mode": "thresholds"},
+          "mappings": [],
+          "max": 100,
+          "min": 0,
+          "thresholds": {"mode": "absolute", "steps": [{"color": "green", "value": null}, {"color": "orange", "value": 80}, {"color": "red", "value": 95}]},
+          "unit": "percent"
+        },
+        "overrides": []
+      },
+      "gridPos": {"h": 4, "w": 4, "x": 20, "y": 0},
+      "id": 14,
+      "options": {"colorMode": "background", "graphMode": "area", "justifyMode": "auto", "orientation": "auto", "reduceOptions": {"calcs": ["lastNotNull"], "fields": "", "values": false}, "textMode": "auto"},
+      "targets": [{"datasource": {"type": "prometheus", "uid": "prometheus"}, "expr": "max(smartctl_device_percentage_used)", "legendFormat": "", "refId": "A"}],
+      "title": "Worst NVMe wear",
+      "type": "stat"
+    },
+    {
+      "datasource": {"type": "prometheus", "uid": "prometheus"},
+      "description": "Rated endurance consumed per drive. The line is nearly flat by nature — wear moves on a scale of weeks — so the useful reading is the spread between drives and the slope, not today's value. Joined to smartctl_device for the model name, because the device label alone is not comparable across nodes.",
+      "fieldConfig": {
+        "defaults": {
+          "color": {"mode": "palette-classic"},
+          "custom": {"axisCenteredZero": false, "axisColorMode": "text", "axisPlacement": "auto", "barAlignment": 0, "drawStyle": "line", "fillOpacity": 10, "gradientMode": "none", "hideFrom": {"legend": false, "tooltip": false, "viz": false}, "lineInterpolation": "smooth", "lineWidth": 2, "pointSize": 5, "scaleDistribution": {"type": "linear"}, "showPoints": "never", "spanNulls": false, "stacking": {"group": "A", "mode": "none"}, "thresholdsStyle": {"mode": "dashed"}},
+          "mappings": [],
+          "max": 100,
+          "min": 0,
+          "thresholds": {"mode": "absolute", "steps": [{"color": "green", "value": null}, {"color": "orange", "value": 80}, {"color": "red", "value": 95}]},
+          "unit": "percent"
+        },
+        "overrides": []
+      },
+      "gridPos": {"h": 9, "w": 12, "x": 0, "y": 13},
+      "id": 15,
+      "options": {"legend": {"calcs": ["last"], "displayMode": "table", "placement": "bottom", "showLegend": true}, "tooltip": {"mode": "multi", "sort": "desc"}},
+      "targets": [
+        {
+          "datasource": {"type": "prometheus", "uid": "prometheus"},
+          "expr": "smartctl_device_percentage_used * on (node, device) group_left(model_name) smartctl_device",
+          "legendFormat": "{{node}} {{model_name}}",
+          "refId": "A"
+        }
+      ],
+      "title": "NVMe wear",
+      "type": "timeseries"
+    },
+    {
+      "datasource": {"type": "prometheus", "uid": "prometheus"},
+      "description": "The failure-now signals, as opposed to the endurance budget above. Spare below its threshold means the drive has run out of blocks to remap defects into; media errors are unrecoverable data-integrity failures and should never increment; the critical warning is a bitfield the drive raises itself. Written bytes is the counter behind the wear percentage, useful for projecting when a drive will reach it.",
+      "fieldConfig": {
+        "defaults": {
+          "color": {"mode": "thresholds"},
+          "custom": {"align": "auto", "cellOptions": {"type": "auto"}, "inspect": false},
+          "mappings": [],
+          "thresholds": {"mode": "absolute", "steps": [{"color": "text", "value": null}]}
+        },
+        "overrides": [
+          {"matcher": {"id": "byName", "options": "wear"}, "properties": [{"id": "unit", "value": "percent"}, {"id": "custom.cellOptions", "value": {"type": "color-text"}}, {"id": "thresholds", "value": {"mode": "absolute", "steps": [{"color": "green", "value": null}, {"color": "orange", "value": 80}, {"color": "red", "value": 95}]}}]},
+          {"matcher": {"id": "byName", "options": "spare"}, "properties": [{"id": "unit", "value": "percent"}]},
+          {"matcher": {"id": "byName", "options": "media errors"}, "properties": [{"id": "custom.cellOptions", "value": {"type": "color-text"}}, {"id": "thresholds", "value": {"mode": "absolute", "steps": [{"color": "green", "value": null}, {"color": "red", "value": 1}]}}]},
+          {"matcher": {"id": "byName", "options": "critical warning"}, "properties": [{"id": "custom.cellOptions", "value": {"type": "color-text"}}, {"id": "thresholds", "value": {"mode": "absolute", "steps": [{"color": "green", "value": null}, {"color": "red", "value": 1}]}}]},
+          {"matcher": {"id": "byName", "options": "powered on"}, "properties": [{"id": "unit", "value": "s"}]},
+          {"matcher": {"id": "byName", "options": "written"}, "properties": [{"id": "unit", "value": "bytes"}]}
+        ]
+      },
+      "gridPos": {"h": 9, "w": 12, "x": 12, "y": 13},
+      "id": 16,
+      "options": {"cellHeight": "sm", "footer": {"countRows": false, "fields": "", "reducer": ["sum"], "show": false}, "showHeader": true, "sortBy": [{"desc": true, "displayName": "wear"}]},
+      "targets": [
+        {"datasource": {"type": "prometheus", "uid": "prometheus"}, "expr": "smartctl_device_percentage_used * on (node, device) group_left(model_name) smartctl_device", "format": "table", "instant": true, "refId": "A"},
+        {"datasource": {"type": "prometheus", "uid": "prometheus"}, "expr": "smartctl_device_available_spare * on (node, device) group_left(model_name) smartctl_device", "format": "table", "instant": true, "refId": "B"},
+        {"datasource": {"type": "prometheus", "uid": "prometheus"}, "expr": "smartctl_device_media_errors * on (node, device) group_left(model_name) smartctl_device", "format": "table", "instant": true, "refId": "C"},
+        {"datasource": {"type": "prometheus", "uid": "prometheus"}, "expr": "smartctl_device_critical_warning * on (node, device) group_left(model_name) smartctl_device", "format": "table", "instant": true, "refId": "D"},
+        {"datasource": {"type": "prometheus", "uid": "prometheus"}, "expr": "smartctl_device_power_on_seconds * on (node, device) group_left(model_name) smartctl_device", "format": "table", "instant": true, "refId": "E"},
+        {"datasource": {"type": "prometheus", "uid": "prometheus"}, "expr": "smartctl_device_bytes_written * on (node, device) group_left(model_name) smartctl_device", "format": "table", "instant": true, "refId": "F"}
+      ],
+      "title": "SMART health",
+      "transformations": [
+        {"id": "merge", "options": {}},
+        {
+          "id": "organize",
+          "options": {
+            "excludeByName": {"Time": true, "__name__": true, "container": true, "endpoint": true, "instance": true, "job": true, "namespace": true, "pod": true, "service": true},
+            "indexByName": {},
+            "renameByName": {"node": "node", "device": "device", "model_name": "model", "Value #A": "wear", "Value #B": "spare", "Value #C": "media errors", "Value #D": "critical warning", "Value #E": "powered on", "Value #F": "written"}
          }
        }
      ],
@@ -58,7 +234,7 @@
        },
        "overrides": []
      },
-      "gridPos": {"h": 9, "w": 12, "x": 0, "y": 9},
+      "gridPos": {"h": 9, "w": 12, "x": 0, "y": 22},
      "id": 2,
      "options": {"legend": {"calcs": ["mean", "max"], "displayMode": "table", "placement": "bottom", "showLegend": true}, "tooltip": {"mode": "multi", "sort": "desc"}},
      "targets": [
@@ -91,7 +267,7 @@
        },
        "overrides": []
      },
-      "gridPos": {"h": 9, "w": 12, "x": 12, "y": 9},
+      "gridPos": {"h": 9, "w": 12, "x": 12, "y": 22},
      "id": 3,
      "options": {"legend": {"calcs": ["mean", "max"], "displayMode": "table", "placement": "bottom", "showLegend": true}, "tooltip": {"mode": "multi", "sort": "desc"}},
      "targets": [
@@ -124,7 +300,7 @@
        },
        "overrides": []
      },
-      "gridPos": {"h": 9, "w": 12, "x": 0, "y": 18},
+      "gridPos": {"h": 9, "w": 12, "x": 0, "y": 31},
      "id": 4,
      "options": {"legend": {"calcs": ["mean", "max"], "displayMode": "table", "placement": "bottom", "showLegend": true}, "tooltip": {"mode": "multi", "sort": "desc"}},
      "targets": [
@@ -162,7 +338,7 @@
          }
        ]
      },
-      "gridPos": {"h": 9, "w": 12, "x": 12, "y": 18},
+      "gridPos": {"h": 9, "w": 12, "x": 12, "y": 31},
      "id": 5,
      "options": {"legend": {"calcs": ["mean", "max"], "displayMode": "table", "placement": "bottom", "showLegend": true}, "tooltip": {"mode": "multi", "sort": "desc"}},
      "targets": [
@@ -184,7 +360,7 @@
    },
    {
      "datasource": {"type": "prometheus", "uid": "prometheus"},
-      "description": "Composite temperature reported by each controller, read from hwmon in sysfs. This is the one health value available without an admin ioctl, which is why it is the only SMART-adjacent series on this dashboard.",
+      "description": "Composite temperature reported by each controller, read from hwmon in sysfs. This is the one health value available without an admin ioctl, which is why it is the only SMART-adjacent series on this dashboard. The thresholds are generic NVMe limits rather than any particular drive's rating — check the datasheet before treating a crossing as urgent.",
      "fieldConfig": {
        "defaults": {
          "color": {"mode": "palette-classic"},
@@ -195,7 +371,7 @@
        },
        "overrides": []
      },
-      "gridPos": {"h": 9, "w": 12, "x": 0, "y": 27},
+      "gridPos": {"h": 9, "w": 12, "x": 0, "y": 40},
      "id": 6,
      "options": {"legend": {"calcs": ["mean", "max"], "displayMode": "table", "placement": "bottom", "showLegend": true}, "tooltip": {"mode": "multi", "sort": "desc"}},
      "targets": [
@@ -222,7 +398,7 @@
        },
        "overrides": []
      },
-      "gridPos": {"h": 9, "w": 12, "x": 12, "y": 27},
+      "gridPos": {"h": 9, "w": 12, "x": 12, "y": 40},
      "id": 7,
      "options": {"legend": {"calcs": ["mean", "max"], "displayMode": "table", "placement": "bottom", "showLegend": true}, "tooltip": {"mode": "multi", "sort": "desc"}},
      "targets": [
@@ -244,11 +420,40 @@
    },
    {
      "datasource": {"type": "prometheus", "uid": "prometheus"},
-      "gridPos": {"h": 8, "w": 24, "x": 0, "y": 36},
+      "description": "EPHEMERAL fill level per node. Growth here is usually container images and pod scratch space rather than anything Ceph does.",
+      "fieldConfig": {
+        "defaults": {
+          "color": {"mode": "palette-classic"},
+          "custom": {"axisCenteredZero": false, "axisColorMode": "text", "axisPlacement": "auto", "barAlignment": 0, "drawStyle": "line", "fillOpacity": 10, "gradientMode": "none", "hideFrom": {"legend": false, "tooltip": false, "viz": false}, "lineInterpolation": "smooth", "lineWidth": 2, "pointSize": 5, "scaleDistribution": {"type": "linear"}, "showPoints": "never", "spanNulls": false, "stacking": {"group": "A", "mode": "none"}, "thresholdsStyle": {"mode": "dashed"}},
+          "mappings": [],
+          "max": 1,
+          "min": 0,
+          "thresholds": {"mode": "absolute", "steps": [{"color": "green", "value": null}, {"color": "orange", "value": 0.7}, {"color": "red", "value": 0.85}]},
+          "unit": "percentunit"
+        },
+        "overrides": []
+      },
+      "gridPos": {"h": 8, "w": 24, "x": 0, "y": 49},
+      "id": 9,
+      "options": {"legend": {"calcs": ["last", "max"], "displayMode": "table", "placement": "bottom", "showLegend": true}, "tooltip": {"mode": "multi", "sort": "desc"}},
+      "targets": [
+        {
+          "datasource": {"type": "prometheus", "uid": "prometheus"},
+          "expr": "(1 - node_filesystem_avail_bytes{mountpoint=\"/var\"} / node_filesystem_size_bytes{mountpoint=\"/var\"}) * on (instance) group_left(nodename) node_uname_info",
+          "legendFormat": "{{nodename}} /var",
+          "refId": "A"
+        }
+      ],
+      "title": "EPHEMERAL usage",
+      "type": "timeseries"
+    },
+    {
+      "datasource": {"type": "prometheus", "uid": "prometheus"},
+      "gridPos": {"h": 11, "w": 24, "x": 0, "y": 57},
      "id": 8,
      "options": {
        "code": {"language": "plaintext", "showLineNumbers": false, "showMiniMap": false},
-        "content": "### What this dashboard cannot tell you\n\n**Endurance is missing.** There is no wear, no written-bytes total, no power-on hours and no media-error count here, because no exporter in this cluster produces them. NVMe reports those over an admin ioctl that needs elevated privileges, and temperature is the only health value the kernel publishes through sysfs. Tracked as **#549** — do not read a healthy dashboard as a healthy drive.\n\n**The three roles are not interchangeable.** Each node carries a Kingston OM8PGP41024Q as the Talos system disk, a Samsung PM983 that Rook claims as the Ceph OSD, and a Crucial P3 that was retired from Ceph and now carries the EPHEMERAL volume. The Crucial drives were replaced *because* they were worn, so the drive with the least endurance left is the one holding container state — and it is the one nothing is watching.\n\n**Device names are not identity.** `nvme0` is the Kingston on k8s-1 and k8s-3 and the Crucial on k8s-2. Every panel here resolves the model through `node_nvme_info` for that reason; a query written against a bare device name compares different hardware and will keep doing so silently.",
+        "content": "### What this dashboard cannot tell you\n\nThese notes are about mechanisms, not about the drives currently fitted. The inventory table above is the live answer to what is in the machines; nothing here restates it, because prose does not get re-read when hardware is swapped.\n\n**Wear is a budget, not a prediction.** The percentage is what the drive reports against its own rated endurance. Drives do not stop at 100 — they usually keep working and start consuming spare blocks — so read it for planning, and read available spare and media errors for whether something is failing now. Those are different questions and the alert rules treat them as such.\n\n**A green top row is not a healthy drive.** Endurance says nothing about the drive that dies of a controller fault tomorrow, and this dashboard cannot see one coming.\n\nCeph keeps its own wear figures for OSDs in the devicehealth module, which is a useful cross-check but covers OSDs only: `kubectl -n rook-ceph exec deploy/rook-ceph-tools -- ceph device ls`. A drive removed from Ceph is purged from that registry and its history goes with it.\n\n**Roles are assigned in configuration, not by device name.** Talos selects the system disk and the EPHEMERAL volume by serial, Rook selects the OSD by `/dev/disk/by-id` path. Two consequences outlive any particular set of drives: a broad selector such as `disk.transport == 'nvme'` matches every drive in the box, with the installer taking the OSD as the failure mode — and a drive retired from Ceph is not necessarily out of service, and putting a worn one on EPHEMERAL is a sensible destination rather than a hazard — that volume is built to be rebuilt. Check the inventory table for what a given drive holds before reading its wear as urgent.\n\n**A dying NVMe here hangs rather than errors.** Talos boots with `nvme_core.io_timeout=4294967295`, so NVMe commands never time out. Expect a stall, not an I/O error, and expect the latency panel to go flat rather than spike.\n\n**Kernel messages are not retained.** Talos kernel logs do not reach Loki — the only log jobs are Kubernetes pods and a systemd-journal from elsewhere. `talosctl -n <node> dmesg` is the only source, it is a ring buffer, and a reboot empties it. An NVMe error from before the last reboot left no trace anywhere.",
        "mode": "markdown"
      },
      "title": "Gaps and caveats",
@@ -24,8 +24,10 @@ spec:
      enabled: true
      defaults:
        labels:
-          # Required for kube-prometheus-stack's Prometheus to pick up
-          # this ServiceMonitor (its selector matches release).
+          # Not required for discovery — serviceMonitorSelector is empty — but
+          # kept for consistency with the other monitors. The Probes in
+          # monitoring-rules/probes-blackbox.yaml do need it; probeSelector
+          # still matches on release.
          release: kube-prometheus-stack
        interval: 30s
    # Helm DOES deep-merge this map with the chart's default (that is why
@@ -56,26 +56,21 @@ spec:
        #
        # By default kube-prometheus-stack sets these selectors to
        # `matchLabels: {release: kube-prometheus-stack}`. ServiceMonitors
-        # created at RUNTIME by third-party operators carry that operator's own
-        # labels instead and can never be made to match — no static manifest or
-        # Kustomize patch can relabel an object the operator creates itself.
+        # created at RUNTIME by third-party operators — Rook, goauthentik.io —
+        # carry that operator's own labels instead and can never be made to
+        # match: no static manifest or Kustomize patch can relabel an object
+        # the operator creates itself. Left strict, those targets are dropped
+        # silently, with no failed resource and no gap visible anywhere except
+        # in the missing series.
        #
-        # This was silently dropping 12 of 30 ServiceMonitors (2026-07-27):
-        #   rook-ceph/rook-ceph-mgr, rook-ceph/rook-ceph-exporter  (team: rook)
-        #   authentik/ak-outpost-*  x10                            (goauthentik.io/...)
-        # Consequence: ZERO `ceph_*` series existed in Prometheus for all 79
-        # days of the cluster's life — the entire storage layer had no
-        # telemetry, no history, and any Ceph alerting rule would have had
-        # nothing to fire on. The Rook side is the reason this was found; the
-        # authentik outpost targets come along with it.
+        # Because these two are empty, the `release` label on this repo's own
+        # ServiceMonitors and PodMonitors is decorative. It is still set for
+        # consistency, and the comments there say so.
        #
-        # This is the ServiceMonitor twin of the trap already documented for
-        # rules in monitoring-rules/prometheusrule-velero.yaml ("without this
-        # label the rule is created but never loaded").
-        #
-        # ruleSelector is deliberately NOT loosened: this repo's PrometheusRules
-        # all carry `release: kube-prometheus-stack` on purpose, and keeping
-        # that selector strict stops a stray third-party rule from firing here.
+        # ruleSelector, probeSelector and scrapeConfigSelector are deliberately
+        # NOT loosened: nothing outside this repo creates those, so keeping the
+        # selectors strict stops a stray third-party rule from firing here. For
+        # PrometheusRules and Probes the label IS required.
        serviceMonitorSelectorNilUsesHelmValues: false
        podMonitorSelectorNilUsesHelmValues: false
        # Rewrites the in-cluster URL embedded in alert generatorURLs and
@@ -15,6 +15,7 @@ resources:
  - prometheus-gate-service.yaml
  - prometheus-gate-ingress.yaml
  - ci-diagnostics-rbac.yaml
+  - smartctl-exporter.yaml
  - dashboards/
 # prometheusrule-garage.yaml lives in ./monitoring-rules/ and is applied by a
 # separate Flux Kustomization that dependsOn `monitoring` — otherwise the
@@ -0,0 +1,89 @@
+# SMART/endurance metrics for every NVMe drive in the fleet (#549).
+#
+# Runs privileged: host device access is gated by the container device cgroup,
+# and Kubernetes offers no per-device allowlist. Narrower settings do not work;
+# the alternatives that were tried are in the commit history.
+apiVersion: apps/v1
+kind: DaemonSet
+metadata:
+  name: smartctl-exporter
+  namespace: monitoring
+  labels:
+    app.kubernetes.io/name: smartctl-exporter
+spec:
+  selector:
+    matchLabels:
+      app.kubernetes.io/name: smartctl-exporter
+  template:
+    metadata:
+      labels:
+        app.kubernetes.io/name: smartctl-exporter
+    spec:
+      # Control planes are also the storage nodes here, so the exporter has to
+      # tolerate the control-plane taint or it would cover nothing at all.
+      tolerations:
+        - key: node-role.kubernetes.io/control-plane
+          operator: Exists
+          effect: NoSchedule
+      containers:
+        - name: smartctl-exporter
+          image: quay.io/prometheuscommunity/smartctl-exporter:v0.14.0
+          # No --smartctl.device: the exporter scans and rescans on its own.
+          # Device names are not stable across these machines.
+          args:
+            - --web.listen-address=:9633
+          ports:
+            - name: http-metrics
+              containerPort: 9633
+              protocol: TCP
+          securityContext:
+            runAsUser: 0
+            runAsNonRoot: false
+            privileged: true
+            # The API rejects privileged together with
+            # allowPrivilegeEscalation: false.
+            allowPrivilegeEscalation: true
+            readOnlyRootFilesystem: true
+          volumeMounts:
+            # Not read-only: smartmontools opens NVMe devices read-write.
+            - name: dev
+              mountPath: /dev
+            # Scratch space, because the root filesystem is read-only.
+            - name: tmp
+              mountPath: /tmp
+          resources:
+            requests:
+              cpu: 10m
+              memory: 32Mi
+            limits:
+              memory: 128Mi
+          livenessProbe:
+            httpGet:
+              path: /metrics
+              port: http-metrics
+            initialDelaySeconds: 15
+            periodSeconds: 30
+      volumes:
+        - name: dev
+          hostPath:
+            path: /dev
+            type: Directory
+        - name: tmp
+          emptyDir: {}
+---
+apiVersion: v1
+kind: Service
+metadata:
+  name: smartctl-exporter
+  namespace: monitoring
+  labels:
+    app.kubernetes.io/name: smartctl-exporter
+spec:
+  clusterIP: None
+  selector:
+    app.kubernetes.io/name: smartctl-exporter
+  ports:
+    - name: http-metrics
+      port: 9633
+      targetPort: http-metrics
+      protocol: TCP
@@ -55,7 +55,7 @@ spec:
        # stdlib only; Flux keeps the tag in lockstep via the shared image
        # policy) — no extra dependency.
        - name: reconcile-publish-ip
-          image: ghcr.io/music-assistant/server:2.10.0 # {"$imagepolicy": "flux-system:music-assistant"}
+          image: ghcr.io/music-assistant/server:2.10.1 # {"$imagepolicy": "flux-system:music-assistant"}
          command: ["/app/venv/bin/python", "/scripts/reconcile.py"]
          volumeMounts:
            - name: data
@@ -65,7 +65,7 @@ spec:
              readOnly: true
      containers:
        - name: music-assistant
-          image: ghcr.io/music-assistant/server:2.10.0 # {"$imagepolicy": "flux-system:music-assistant"}
+          image: ghcr.io/music-assistant/server:2.10.1 # {"$imagepolicy": "flux-system:music-assistant"}
          env:
            - name: LOG_LEVEL
              value: info
@@ -24,6 +24,22 @@ spec:
            - name: wyoming
              containerPort: 10400
              protocol: TCP
+          # Wyoming is raw TCP with no HTTP surface and no health verb, so
+          # accepting a connection is all that can be asserted from outside the
+          # process. Weaker than an HTTP probe, but the previous state was none
+          # at all: a dead server stayed Ready and kept being routed to.
+          livenessProbe:
+            tcpSocket:
+              port: wyoming
+            initialDelaySeconds: 60
+            periodSeconds: 30
+            timeoutSeconds: 5
+          readinessProbe:
+            tcpSocket:
+              port: wyoming
+            initialDelaySeconds: 15
+            periodSeconds: 10
+            timeoutSeconds: 5
          resources:
            requests:
              cpu: 100m
@@ -5,25 +5,15 @@ metadata:
  labels:
    app.kubernetes.io/name: otbr
 spec:
-  # Disabled 2026-07-11 (replicas: 0) after otbr broke Matter.
+  # DISABLED (replicas: 0). Running otbr broke Matter: its radio is RF-isolated
+  # enough from the Nest mesh that it forms a rival partition of the same
+  # network, and the two bridge only over Ethernet — fast enough for a ping,
+  # too slow for the fragmented CASE handshake, so devices stay discoverable
+  # while every commissioning attempt times out.
  #
-  # otbr is seeded with the Nest network's dataset so it should join the
-  # existing partition as an additive co-BR. In practice it does not merge
-  # cleanly: its SLZB-06 radio is RF-isolated enough from the Nest mesh that
-  # otbr elects itself leader of a rival partition (or the network re-addresses
-  # under a new OMR prefix, observed fd5f -> fdd5). The two same-network
-  # partitions then bridge only over the Ethernet backbone, which carries a
-  # ping but is too slow for the large fragmented CASE handshake -- every
-  # Matter device stays mDNS-discoverable while CASE times out. Removing otbr
-  # re-merges the mesh onto the Nest hubs and Matter recovers.
-  #
-  # This is NOT a diagnosis of a specific config bug: the DHCP/sbr routing
-  # changes (19a4482, df61407) were investigated and matter-server's IPv6 path
-  # to the mesh works (reaches devices, ping ok); sbr's v6 table 100 is an
-  # inert orphan and otbr's eth0 default is outranked by net1's pref-high RA
-  # default. The instability is at the Thread partition layer. Re-enable only
-  # after the co-BR integration is verified to MERGE (one partition, one OMR,
-  # otbr's router table shows the Nest routers) instead of split.
+  # The instability is at the Thread partition layer, not in the config below.
+  # Re-enable only once co-BR integration is verified to MERGE: one partition,
+  # one OMR prefix, and the Nest routers visible in otbr's router table.
  replicas: 0
  strategy:
    type: Recreate
@@ -46,25 +36,17 @@ spec:
      # (slzb-thread.renner.uno). Dropping the workload-class=pinned
      # toleration lets the edge taint keep it off the tiny edge box.
      containers:
-        # The Thread RCP lives on a SLZB-06 over Ethernet at
-        # slzb-thread.renner.uno:6638 (Serial-over-IP). otbr-agent's
-        # spinel transport supports `spinel+hdlc+forkpty://<exec>?<args>`
-        # which forks an exec whose stdio becomes the spinel-HDLC
-        # transport, but the upstream openthread/otbr image does NOT
-        # ship socat (or any TCP-stream tool), so that URL form ends in
-        # silent ENOENT and otbr-agent dies right after logging the
-        # radio URL.
+        # The Thread RCP is a network-attached radio (Serial-over-IP), so the
+        # spinel transport needs a TCP-to-PTY bridge. Two obvious approaches
+        # do not work and should not be retried:
        #
-        # A sidecar socat won't work either: each container has its own
-        # devpts namespace, so a PTY (e.g. /dev/pts/0) created in a
-        # sibling container is invisible from this container — a shared
-        # emptyDir symlink to /dev/pts/0 is dangling.
+        #   - `spinel+hdlc+forkpty://` needs socat, which the upstream image
+        #     does not ship; the URL fails with a silent ENOENT and otbr-agent
+        #     dies right after logging it.
+        #   - A sidecar cannot provide it either: devpts is per-container, so
+        #     a PTY created next door is invisible here and the symlink dangles.
        #
-        # The bridge has to live in the otbr container's own namespace.
-        # Install socat at startup via apt (Ubuntu 18.04 base, no egress
-        # restrictions on this namespace), run it in the background as
-        # the spinel-HDLC TCP↔PTY bridge, then exec the upstream
-        # entrypoint with RADIO_URL pointing at the PTY symlink.
+        # Hence socat is installed at startup and run inside this container.
        - name: otbr
          image: openthread/otbr:latest
          command:
@@ -1,18 +0,0 @@
-apiVersion: external-secrets.io/v1
-kind: ExternalSecret
-metadata:
-  name: barman-cloud-creds
-  namespace: paperless
-  annotations:
-    # Prune-disabled — a standing guard kept from the seed->paperless-KS handoff (barman creds).
-    kustomize.toolkit.fluxcd.io/prune: disabled
-spec:
-  refreshInterval: 1h
-  secretStoreRef:
-    kind: ClusterSecretStore
-    name: openbao
-  target:
-    name: barman-cloud-creds # keeps the old Secret's name — consumers unchanged
-  dataFrom:
-    - extract:
-        key: seed/paperless/barman-creds
@@ -70,6 +70,27 @@ spec:
            - name: consume
              mountPath: /home/scanner
              subPath: scanner
+          # FTP has no health verb, so the control port accepting a connection
+          # is what can be asserted. It is enough for the failure that matters:
+          # if vsftpd dies the scanner cannot deposit anything and nothing else
+          # in the chain notices, because paperless only ever sees an empty
+          # consume directory — which is indistinguishable from nobody having
+          # scanned.
+          #
+          # Only the control port is probed. The passive range is negotiated
+          # per transfer and is not listening at rest.
+          livenessProbe:
+            tcpSocket:
+              port: ftp-ctrl
+            initialDelaySeconds: 15
+            periodSeconds: 30
+            timeoutSeconds: 5
+          readinessProbe:
+            tcpSocket:
+              port: ftp-ctrl
+            initialDelaySeconds: 5
+            periodSeconds: 10
+            timeoutSeconds: 5
          resources:
            requests:
              cpu: 20m
@@ -1,3 +1,9 @@
+# One Hetzner S3 key, one path, shared by every barman ObjectStore. Separate
+# per-app paths would not make rotation independent — that needs one Hetzner
+# key per consumer (#397).
+#
+# velero reads the same key from infrastructure/velero-hetzner, which holds it
+# as a credentials file rather than these three fields.
 apiVersion: external-secrets.io/v1
 kind: ExternalSecret
 metadata:
@@ -15,4 +21,4 @@ spec:
    name: hetzner-s3-creds # keeps the old Secret's name — consumers unchanged
  dataFrom:
    - extract:
-        key: seed/paperless/hetzner-creds
+        key: infrastructure/hetzner-s3
@@ -20,7 +20,6 @@ resources:
  - cluster.yaml
  - objectstore.yaml
  - scheduled-backup.yaml
-  - barman-creds-externalsecret.yaml
  - hetzner-creds-externalsecret.yaml
  - pvcs.yaml
 configMapGenerator:
@@ -31,12 +31,14 @@ data:
  PAPERLESS_CONSUMER_DELETE_DUPLICATES: "true"
  PAPERLESS_CONSUMER_ENABLE_BARCODES: "true"
  PAPERLESS_CONSUMER_ENABLE_ASN_BARCODE: "true"
-  PAPERLESS_CONSUMER_BARCODE_SCANNER: "ZXING"
+  # No CONSUMER_BARCODE_SCANNER: zxing-cpp is the only backend, so the
+  # setting no longer exists. pyzbar and libzbar are gone from the image.
+  #
  # CephFS does not propagate inotify across nodes — files written
  # via the RWX consume PVC from a pod on a different node than
  # paperless never fire IN_CREATE in paperless's kernel. Polling
  # is the reliable backstop. See wiki: cephfs-inotify-no-cross-node-propagation.
-  PAPERLESS_CONSUMER_POLLING: "10"
+  PAPERLESS_CONSUMER_POLLING_INTERVAL: "10"
  PAPERLESS_REDIS: "redis://redis:6379"
  PAPERLESS_DBENGINE: "postgresql"
  PAPERLESS_DBHOST: "pprl-pg-rw"
@@ -120,7 +122,7 @@ spec:
              drop: ["ALL"]
      containers:
        - name: paperless
-          image: ghcr.io/paperless-ngx/paperless-ngx:2.20.15 # {"$imagepolicy": "flux-system:paperless-ngx"}
+          image: ghcr.io/paperless-ngx/paperless-ngx:3.1.2 # {"$imagepolicy": "flux-system:paperless-ngx"}
          ports:
            - name: http
              containerPort: 8000
@@ -155,21 +157,52 @@ spec:
            - name: bridge-cert
              mountPath: /shared
              readOnly: true
-          # TCP probes — HTTP probes against /api/ flooded the
-          # `paperless.auth` logger every 10 s with "No authentication
-          # provided from private IP …". With ENABLE_HTTP_REMOTE_USER
-          # the middleware logs every unauth API request, and there's
-          # no public health endpoint to probe. TCP confirms gunicorn
-          # is bound; that's the same liveness signal we'd get from
-          # /api/ minus the noise.
+          # /accounts/login/ rather than /api/ or a TCP connect.
+          #
+          # /api/ is unusable as a probe target: with ENABLE_HTTP_REMOTE_USER
+          # the remote-user middleware logs "No authentication provided from
+          # private IP …" for every unauthenticated API request, so probing it
+          # floods `paperless.auth`. Measured: four requests to /api/ produce
+          # four log lines, four to /accounts/login/ produce none — the
+          # middleware only covers the API surface.
+          #
+          # A TCP connect avoids the noise but only proves gunicorn accepted a
+          # socket. /accounts/login/ renders a real Django view, so URL
+          # routing, settings and templating all have to work. It does not
+          # prove Postgres is healthy; nothing cheap here does.
+          #
+          # Safe against ALLOWED_HOSTS: the kubelet sends the pod IP as Host,
+          # and PAPERLESS_ALLOWED_HOSTS is "*". Narrowing that value later
+          # means giving these probes an explicit Host header.
+
+          # The container does not serve until its init sequence finishes:
+          # s6 makes svc-webserver depend on init-migrations and
+          # init-search-index. On the first 3.x start those are the SHA256
+          # checksum backfill, which opens and reads every original and every
+          # archive file, and a full Tantivy index build, since the Whoosh
+          # index cannot be converted. Both scale with the corpus.
+          #
+          # startupProbe holds liveness and readiness off until the webserver
+          # answers, giving that boot 30 * 20s = 10 minutes. Without it the
+          # 120s liveness delay plus three 30s periods kills the pod 210s in,
+          # part-way through a migration, and the next boot starts over.
+          startupProbe:
+            httpGet:
+              path: /accounts/login/
+              port: http
+            periodSeconds: 20
+            timeoutSeconds: 5
+            failureThreshold: 30
          livenessProbe:
-            tcpSocket:
+            httpGet:
+              path: /accounts/login/
              port: http
            initialDelaySeconds: 120
            periodSeconds: 30
            timeoutSeconds: 10
          readinessProbe:
-            tcpSocket:
+            httpGet:
+              path: /accounts/login/
              port: http
            initialDelaySeconds: 30
            periodSeconds: 10
@@ -34,6 +34,32 @@ spec:
            - name: wyoming
              containerPort: 10300
              protocol: TCP
+          # Wyoming is raw TCP with no HTTP surface and no health verb, so
+          # accepting a connection is all that can be asserted from outside the
+          # process — weaker than an HTTP probe, but the previous state was
+          # none at all.
+          #
+          # A startupProbe rather than a long liveness delay: this container
+          # runs with --retrain-on-start, and retraining against the Home
+          # Assistant entity list takes as long as it takes. The startup gate
+          # allows up to 10 minutes (60 x 10s) and only then hands over to
+          # liveness, so a slow retrain cannot be mistaken for a hang, and a
+          # genuine hang after startup is still caught within a minute.
+          startupProbe:
+            tcpSocket:
+              port: wyoming
+            periodSeconds: 10
+            failureThreshold: 60
+          livenessProbe:
+            tcpSocket:
+              port: wyoming
+            periodSeconds: 30
+            timeoutSeconds: 5
+          readinessProbe:
+            tcpSocket:
+              port: wyoming
+            periodSeconds: 10
+            timeoutSeconds: 5
          volumeMounts:
            - name: models
              mountPath: /models
@@ -12,4 +12,4 @@ spec:
    name: hetzner-s3-creds
  dataFrom:
    - extract:
-        key: seed/trmnl/hetzner-creds
+        key: infrastructure/hetzner-s3
@@ -1,20 +1,15 @@
 # Headless renderer: screenshots the Home Assistant e-ink dashboard,
 # dithers it to 16 greys and hands it to Terminus.
 #
-# Upstream ships this as a Home Assistant add-on. Our HA is a plain
-# container with no Supervisor, so it runs standalone here instead —
-# viable because the app prefers HOME_ASSISTANT_URL/ACCESS_TOKEN env
-# vars over /data/options.json and authenticates with an ordinary
-# long-lived token. SUPERVISOR_TOKEN is deliberately NOT set: it only
-# flips an internal isAddOn flag, and setting it would switch the app
-# to add-on behaviour (fixed port, /data assumptions).
+# Upstream ships this as a Home Assistant add-on; it runs standalone here
+# because the app prefers the env vars over /data/options.json. Do NOT set
+# SUPERVISOR_TOKEN — it flips an internal isAddOn flag and switches the app to
+# add-on behaviour (fixed port, /data assumptions).
 #
-# DIRECTION OF TRAVEL, which is the non-obvious part: with the
-# byos-hanami webhook in `uri` delivery mode the renderer does NOT
-# push image bytes. It POSTs a URL pointing at its own /output/<file>
-# endpoint, and TERMINUS FETCHES THE IMAGE BACK from it. That is why
-# both live in this namespace — the pull is intra-namespace and is
-# already permitted by the default-deny-ingress rule.
+# DIRECTION OF TRAVEL, the non-obvious part: in `uri` delivery mode the
+# renderer does not push image bytes. It POSTs a URL to its own /output/<file>
+# and Terminus fetches the image back. Both therefore live in this namespace,
+# where that pull is already permitted.
 apiVersion: v1
 kind: ConfigMap
 metadata:
@@ -27,7 +27,7 @@ spec:
        # Valkey major version tracks upstream's compose.yml (9.x). Sidekiq
        # is the only consumer; a major bump is a separate migration.
        - name: valkey
-          image: valkey/valkey:9.1.1-alpine # {"$imagepolicy": "flux-system:valkey-trmnl"}
+          image: valkey/valkey:9.1.2-alpine # {"$imagepolicy": "flux-system:valkey-trmnl"}
          args:
            - valkey-server
            - --save
@@ -29,6 +29,27 @@ spec:
            - name: wyoming
              containerPort: 10300
              protocol: TCP
+          # Wyoming is a raw TCP protocol with no HTTP surface and no health
+          # verb, so accepting a connection is the only thing that can be
+          # asserted from outside the process. That is weaker than an HTTP
+          # probe but strictly better than the previous state of none at all,
+          # where a dead server stayed Ready and Home Assistant kept routing
+          # speech to it.
+          #
+          # The liveness delay is generous because the model is loaded at
+          # startup from the data volume.
+          livenessProbe:
+            tcpSocket:
+              port: wyoming
+            initialDelaySeconds: 90
+            periodSeconds: 30
+            timeoutSeconds: 5
+          readinessProbe:
+            tcpSocket:
+              port: wyoming
+            initialDelaySeconds: 20
+            periodSeconds: 10
+            timeoutSeconds: 5
          volumeMounts:
            - name: data
              mountPath: /data
@@ -305,7 +305,7 @@ server → agent → step pod → server end to end:

 ```sh
 curl -sS -o /dev/null -w '%{http_code}\n' https://ci.renner.uno/
-woodpecker pipeline create --branch master --var PIPELINE=e2e-test k.renner/homelab
+woodpecker-cli pipeline deploy k.renner/homelab <pipeline-number> e2e-test
 ```

 Step pods must still reach the server on `:8000` while still being unable to
@@ -94,6 +94,31 @@ spec:
          envFrom:
            - secretRef:
                name: woodpecker-secret
+          ports:
+            # WOODPECKER_HEALTHCHECK defaults to true and serves :3000, so this
+            # port already existed; declaring it just lets the probe name it.
+            - name: health
+              containerPort: 3000
+              protocol: TCP
+          # /healthz answers 500 ONLY when a running workflow has passed its own
+          # timeout plus a one-hour buffer (agent/state.go, State.Healthy). An
+          # idle agent always answers 200.
+          #
+          # So this catches a wedged build holding a slot, which is otherwise
+          # invisible — and it does NOT catch an agent that has lost its server
+          # connection, which reports healthy while quietly taking no work. Do
+          # not read a green probe here as "CI is fine".
+          #
+          # Liveness only: the agent fronts no Service, so readiness would gate
+          # nothing. The upstream condition is already debounced by that hour,
+          # which is why the thresholds here are short.
+          livenessProbe:
+            httpGet:
+              path: /healthz
+              port: health
+            initialDelaySeconds: 20
+            periodSeconds: 30
+            timeoutSeconds: 5
          resources:
            requests:
              cpu: 25m
@@ -1,11 +1,8 @@
 ---
 # Barman S3 credentials for wp-pg.
 #
-# Sourced from seed/paperless/hetzner-creds, which is not where they belong.
-# Issue #397 wants woodpecker to own seed/woodpecker/hetzner-creds; creating
-# that path needs OpenBao write access (`bao kv list seed` → 403 for the
-# identities available here), so it stays open. The values are identical, so it
-# is a one-line swap of the `key:` below once the path exists.
+# One shared path for one shared credential — see the note in
+# ../paperless/hetzner-creds-externalsecret.yaml.
 #
 # The namespace allowlist on the openbao ClusterSecretStore
 # (infrastructure/post-crds/openbao-clustersecretstore.yaml) must include this
@@ -24,4 +21,4 @@ spec:
    name: hetzner-s3-creds
  dataFrom:
    - extract:
-        key: seed/paperless/hetzner-creds
+        key: infrastructure/hetzner-s3
@@ -36,11 +36,9 @@ spec:
  target:
    name: hetzner-s3-creds
  dataFrom:
-    # Reuses the paperless copy of the shared Hetzner S3 credentials (identical
-    # ACCESS_KEY_ID / ACCESS_SECRET_KEY / REGION) to avoid seeding a new OpenBao
-    # path for this migration — same approach woodpecker took. FOLLOW-UP: give
-    # wordpress its own seed/wordpress/hetzner-creds path once OpenBao can be
-    # written, and repoint this here (the value is the same, so it's a drop-in
-    # swap).
+    # One shared path for one shared credential. There is a single Hetzner S3
+    # key behind all of these — see the note in
+    # ../paperless/hetzner-creds-externalsecret.yaml for why per-app paths were
+    # the wrong shape and what would have to change for them to be right.
    - extract:
-        key: seed/paperless/hetzner-creds
+        key: infrastructure/hetzner-s3
@@ -8,6 +8,9 @@ set -euo pipefail
 #   ./bootstrap.sh talos        # Talos apply + K8s bootstrap + kubeconfig (writes access-staging/)
 #   ./bootstrap.sh flux         # reads access-staging/, installs flux, waits for infrastructure
 #   ./bootstrap.sh wait-apps    # waits for apps/authentik/paperless to reconcile
+#   ./bootstrap.sh vmtest       # throwaway QEMU VMs, then the talos phase
+#                               # against them unchanged. Needs root for the
+#                               # provisioner and leaves nothing behind.
 #
 # Flux git source (break-glass): the in-cluster Gitea that Flux normally pulls
 # from is itself Flux-managed, so a cold rebuild cannot pull from it until the
@@ -21,6 +24,13 @@ set -euo pipefail

 TALOS_DIR="$(cd "$(dirname "$0")/talos" && pwd)"
 REPO_ROOT="$(cd "$(dirname "$0")/.." && pwd)"
+# Cilium's single source of truth. Talos ships `cni: none` (talos/patches/
+# cluster.yaml) and nothing else, so the CNI has to be installed here, between
+# `talosctl bootstrap` and Flux — Flux's own controllers are pods and cannot
+# reconcile the network they need in order to start. Everything the install
+# needs is read out of this file at run time so there is no second copy of a
+# version or a value to keep in step. See PROPOSAL-cilium-single-owner.md.
+CILIUM_HR="$REPO_ROOT/kubernetes/infrastructure/cilium/helmrelease.yaml"
 ACCESS_STAGING="$REPO_ROOT/kubernetes/access-staging"
 NODES=(k8s-1 k8s-2 k8s-3)
 # No dedicated workers since the k8s-edge VM was retired (2026-07-02) —
@@ -33,6 +43,24 @@ DNS_SERVER="10.2.40.1"  # UDM (old PVE DNS VIP 10.2.40.53 decommissioned)
 # Cluster API endpoint — Talos VIP (10.2.40.60) elected via etcd, fronted by
 # UniFi DNS A record k8s.renner.uno. Defined in talos/patches/k8s-{1,2,3}.yaml.
 K8S_API_HOST="k8s.renner.uno"
+# Which site patch the nodes get: talos/patches/site-$SITE.yaml. The three
+# variables above and this one are everything the vmtest phase has to change in
+# order to run this same code against throwaway VMs — if that list ever grows,
+# the test is drifting away from the thing it claims to exercise.
+SITE="${SITE:-homelab}"
+# Where this script writes the cluster access files. These are the paths
+# talosctl and kubectl read from anyway, so unset they resolve to exactly the
+# old behaviour. Set, the whole run stays out of $HOME — which is what lets the
+# vmtest phase drive a throwaway cluster without replacing the operator's
+# production access with a VM's.
+TALOSCONFIG_PATH="${TALOSCONFIG:-$HOME/.talos/config}"
+KUBECONFIG_PATH="${KUBECONFIG:-$HOME/.kube/config}"
+case "$KUBECONFIG_PATH" in
+    *:*) echo "KUBECONFIG holds multiple paths; set it to a single file" >&2; exit 1 ;;
+esac
+# Addresses to apply to, in the order of NODES. Empty means resolve the node
+# FQDNs, which is right for real hardware on a network that has DNS for it.
+NODE_ADDRS=()
 GITEA_HOST="gitea.renner.uno"
 GITEA_OWNER="gitea_admin"
 GITEA_REPO="homelab"
@@ -44,6 +72,19 @@ FLUX_SOURCE="${FLUX_SOURCE:-gitea}"
 GITHUB_OWNER="${GITHUB_OWNER:-konairius}"
 GITHUB_REPO="${GITHUB_REPO:-Homelab}"
 FLUX_PATH="kubernetes/clusters/homelab"
+# Branch Flux reconciles from, and that `flux bootstrap` commits its own sync
+# manifests into. master for a real rebuild.
+#
+# Overridable so the phase can be rehearsed without writing to master — point it
+# at a throwaway branch, which has to exist already: `flux bootstrap` clones the
+# branch and fails with `couldn't find remote ref` rather than creating it.
+#
+#     git push origin origin/master:refs/heads/rehearsal-1
+#     FLUX_BRANCH=rehearsal-1 ./bootstrap.sh flux
+#
+# Nothing else about the phase changes, which is the point. Delete the branch
+# afterwards.
+FLUX_BRANCH="${FLUX_BRANCH:-master}"
 SOPS_KEY="$HOME/.config/sops/age/keys.txt"

 PHASE="${1:-all}"
@@ -78,43 +119,145 @@ phase_runs() {
    [[ "$PHASE" == "all" || "$PHASE" == "$1" ]]
 }

+# Provision throwaway QEMU VMs, then run the Talos phase below against
+# them unchanged. Deliberately not a copy of that phase: it sets the site
+# variables and falls through, because a rehearsal that runs different code
+# proves less than one that does not. Everything it changes is listed here — if
+# that list grows, the test is drifting away from what it claims to exercise.
+#
+# What it cannot cover, and what therefore still has to be true on hardware:
+# Ceph (the provisioner gives extra disks to workers only), the mgmt and v30iot
+# VLANs and the Layer2 VIP (one flat NIC per VM), and Flux (its own phase).
+#
+# Needs root for the QEMU provisioner (CNI and KVM), and only for that step.
+if [[ "$PHASE" == "vmtest" ]]; then
+    echo -e "${YELLOW}=== Phase: VM rebuild test ===${NC}"
+    command -v talosctl >/dev/null || fail "talosctl not found"
+    command -v yq >/dev/null       || fail "yq not found"
+    # The node patches are the list; the VM count follows from them rather than
+    # being stated twice. vm-1 is the control plane, the rest are the workers
+    # that carry an OSD device — see the comment on NODES below for why.
+    VM_CP_NODES=(vm-1)
+    VM_WORKER_NODES=(vm-2 vm-3 vm-4)
+    VM_CPS=${#VM_CP_NODES[@]}
+    VM_WORKER_COUNT=${#VM_WORKER_NODES[@]}
+    for n in "${VM_CP_NODES[@]}" "${VM_WORKER_NODES[@]}"; do
+        [[ -f "$TALOS_DIR/patches/$n.yaml" ]] || fail "$TALOS_DIR/patches/$n.yaml not found"
+    done
+    [[ -f "$TALOS_DIR/patches/site-qemu.yaml" ]] || fail "site-qemu.yaml not found"
+
+    # Talos version and Image Factory schematic are read out of the installer
+    # image in cluster.yaml. Naming them here would be a second copy to keep in
+    # step, and the day they diverged the test would quietly stop booting the
+    # image a rebuild installs.
+    VM_IMAGE=$(yq -r '.machine.install.image' "$TALOS_DIR/patches/cluster.yaml")
+    VM_SCHEMATIC=${VM_IMAGE#*metal-installer/}
+    VM_SCHEMATIC=${VM_SCHEMATIC%%:*}
+    VM_VERSION=${VM_IMAGE##*:}
+    [[ ${#VM_SCHEMATIC} -eq 64 && "$VM_VERSION" == v* ]] \
+        || fail "could not read a schematic and version out of '$VM_IMAGE'"
+
+    # sun_path caps a unix socket path at 108 bytes and the provisioner puts a
+    # qemu monitor socket under the state directory, so this has to stay short.
+    # A path under the repo or a long mktemp dir silently fails to boot.
+    VM_STATE=/tmp/bootstrap-vmtest
+    VM_CLUSTER=bootstrap-vmtest
+    VM_DIR=$(mktemp -d)
+    TALOSCTL_BIN=$(command -v talosctl)
+
+    # Hard isolation from the production cluster: talosctl and kubectl both
+    # honour these, and the phase below writes to them rather than to $HOME.
+    export TALOSCONFIG="$VM_DIR/talosconfig"
+    export KUBECONFIG="$VM_DIR/kubeconfig"
+    TALOSCONFIG_PATH="$TALOSCONFIG"
+    KUBECONFIG_PATH="$KUBECONFIG"
+
+    cleanup_vmtest() {
+        echo -n "Destroying throwaway VMs... "
+        sudo -E "$TALOSCTL_BIN" cluster destroy --name "$VM_CLUSTER" --state "$VM_STATE" >/dev/null || true
+        # destroy removes the cluster's own directory but leaves the state root.
+        sudo rm -rf "$VM_STATE"
+        rm -rf "$VM_DIR"
+        echo "done"
+    }
+    trap cleanup_vmtest EXIT
+
+    step 0 "Creating $VM_CPS control plane and $VM_WORKER_COUNT workers in maintenance mode..."
+    # maintenance means the provisioner applies no configuration of its own, so
+    # every byte of machine config below comes from talos/patches.
+    sudo -E "$TALOSCTL_BIN" cluster create qemu \
+        --name "$VM_CLUSTER" \
+        --state "$VM_STATE" \
+        --presets iso,maintenance \
+        --controlplanes "$VM_CPS" \
+        --workers "$VM_WORKER_COUNT" \
+        --talos-version "$VM_VERSION" \
+        --schematic-id "$VM_SCHEMATIC" \
+        --memory-controlplanes 2560MiB \
+        --memory-workers 4GiB \
+        --cpus-controlplanes 2 \
+        --cpus-workers 2 \
+        --disks virtio:10GiB,virtio:8GiB \
+        --talosconfig-destination "$TALOSCONFIG" \
+        || fail "could not create the throwaway VMs"
+    sudo chown -R "$(id -u):$(id -g)" "$VM_STATE" "$TALOSCONFIG"
+    ok
+
+    # The provisioner hands out its CIDR sequentially from .2; .1 is the
+    # gateway and the load balancer it puts in front of the API. If that ever
+    # changes, the apply loop below reports which address stopped answering
+    # rather than failing silently.
+    # One control plane and three workers, not three control planes: the
+    # provisioner gives the second disk only to workers ("disks after the first
+    # one are added only to worker machines"), and an OSD needs it. Three of
+    # them because the CephCluster runs three mons with allowMultiplePerNode
+    # false over pools that are replica 3 across failureDomain host.
+    NODES=("${VM_CP_NODES[@]}")
+    WORKERS=("${VM_WORKER_NODES[@]}")
+    ALL_NODES=("${NODES[@]}" "${WORKERS[@]}")
+    NODE_ADDRS=()
+    for i in $(seq 0 $(( ${#ALL_NODES[@]} - 1 ))); do
+        NODE_ADDRS+=("10.5.0.$(( i + 2 ))")
+    done
+    SITE=qemu
+    K8S_API_HOST=10.5.0.1
+    VMTEST=1
+
+    # Run the real phase, not a reimplementation of it.
+    PHASE=talos
+fi
+
 if phase_runs talos; then
    echo -e "${YELLOW}=== Phase: Talos bootstrap ===${NC}"
    command -v talosctl >/dev/null || fail "talosctl not found"
    command -v kubectl >/dev/null  || fail "kubectl not found"
+    command -v helm >/dev/null   || fail "helm not found (needed to install the CNI)"
+    command -v yq >/dev/null     || fail "yq not found (needed to read the Cilium HelmRelease)"
    [[ -f "$TALOS_DIR/patches/cluster.yaml"         ]] || fail "cluster.yaml patch not found"
-    [[ -f "$TALOS_DIR/patches/cilium-cni.yaml"      ]] || fail "cilium-cni.yaml patch not found"
-    [[ -f "$TALOS_DIR/patches/registry-mirror.yaml" ]] || fail "registry-mirror.yaml patch not found"
+    [[ -f "$TALOS_DIR/patches/containerd-layer-retention.yaml" ]] || fail "containerd-layer-retention.yaml patch not found"
+    [[ -f "$CILIUM_HR"                              ]] || fail "cilium helmrelease not found at $CILIUM_HR"

    step 0 "Generating Talos configs..."
    TALOS_GEN_DIR=$(mktemp -d)
    talosctl gen config homelab "https://${K8S_API_HOST}:6443" \
        --output "$TALOS_GEN_DIR" \
        --force
-    # Strip the auto-generated HostnameConfig docs (conflicts with machine.network.hostname in per-node patches)
-    for f in "$TALOS_GEN_DIR"/controlplane.yaml "$TALOS_GEN_DIR"/worker.yaml; do
-        awk '
-          BEGIN { doc="" }
-          /^---[ \t]*$/ {
-            if (doc !~ /\nkind: HostnameConfig\n/ && doc !~ /^kind: HostnameConfig\n/) printf "%s", doc
-            doc=$0 "\n"; next
-          }
-          { doc = doc $0 "\n" }
-          END {
-            if (doc !~ /\nkind: HostnameConfig\n/ && doc !~ /^kind: HostnameConfig\n/) printf "%s", doc
-          }
-        ' "$f" > "$f.tmp" && mv "$f.tmp" "$f"
-    done
-    mkdir -p ~/.talos
-    cp "$TALOS_GEN_DIR/talosconfig" ~/.talos/config
+    mkdir -p "$(dirname "$TALOSCONFIG_PATH")"
+    cp "$TALOS_GEN_DIR/talosconfig" "$TALOSCONFIG_PATH"

    step 0 "Applying Talos configs to nodes..."
    apply_node_config() {
-        local node=$1 base_config=$2
+        local node=$1 base_config=$2 fixed_addr=${3:-}
        local fqdn="${node}.${DOMAIN}"
-        echo "  $fqdn:"
+        echo "  ${fixed_addr:-$fqdn}:"
        for i in $(seq 1 60); do
-            node_ip=$(resolve_node_ip "$fqdn")
+            # A fixed address skips DNS. Real hardware has a name to resolve;
+            # a throwaway VM has an address and nothing else.
+            if [[ -n "$fixed_addr" ]]; then
+                node_ip="$fixed_addr"
+            else
+                node_ip=$(resolve_node_ip "$fqdn")
+            fi
            if [[ -z "$node_ip" ]]; then
                echo "    attempt $i/60: DNS returned no IP"
                sleep 10
@@ -123,73 +266,216 @@ if phase_runs talos; then
            if err=$(talosctl apply-config --insecure -n "$node_ip" \
                --file "$base_config" \
                --config-patch "@$TALOS_DIR/patches/cluster.yaml" \
-                --config-patch "@$TALOS_DIR/patches/cilium-cni.yaml" \
-                --config-patch "@$TALOS_DIR/patches/registry-mirror.yaml" \
+                --config-patch "@$TALOS_DIR/patches/site-${SITE}.yaml" \
+                --config-patch "@$TALOS_DIR/patches/containerd-layer-retention.yaml" \
                --config-patch "@$TALOS_DIR/patches/${node}.yaml" 2>&1); then
-                echo "    applied via $node_ip ${GREEN}(OK)${NC}"
+                echo -e "    applied via $node_ip ${GREEN}(OK)${NC}"
                return 0
            fi
            echo "    attempt $i/60: $node_ip - ${err//$'\n'/ | }"
            sleep 10
        done
-        fail "Timeout waiting for $fqdn"
+        fail "Timeout waiting for ${fixed_addr:-$fqdn}"
    }

-    for node in "${NODES[@]}"; do
-        apply_node_config "$node" "$TALOS_GEN_DIR/controlplane.yaml"
-    done
-    for node in "${WORKERS[@]}"; do
-        apply_node_config "$node" "$TALOS_GEN_DIR/worker.yaml"
+    # One loop over ALL_NODES rather than one per role, so NODE_ADDRS can be a
+    # single list in the same order. Control planes come first in ALL_NODES,
+    # which is what decides the base config each node gets.
+    for idx in "${!ALL_NODES[@]}"; do
+        if [[ $idx -lt ${#NODES[@]} ]]; then
+            base="$TALOS_GEN_DIR/controlplane.yaml"
+        else
+            base="$TALOS_GEN_DIR/worker.yaml"
+        fi
+        apply_node_config "${ALL_NODES[$idx]}" "$base" "${NODE_ADDRS[$idx]:-}"
    done

    echo -n "Configuring talosctl... "
-    talosctl config endpoint "${NODES[@]/%/.${DOMAIN}}"
-    talosctl config node "${NODES[0]}.${DOMAIN}"
+    # `gen config` leaves talosconfig endpoints empty; they are the Talos API
+    # addresses and unrelated to cluster.controlPlane.endpoint.
+    if [[ ${#NODE_ADDRS[@]} -gt 0 ]]; then
+        talosctl config endpoint "${NODE_ADDRS[@]}"
+        talosctl config node "${NODE_ADDRS[0]}"
+    else
+        talosctl config endpoint "${NODES[@]/%/.${DOMAIN}}"
+        talosctl config node "${NODES[0]}.${DOMAIN}"
+    fi
    ok

-    step 0 "Waiting for Talos cluster formation..."
-    for i in $(seq 1 30); do
-        members=$(talosctl get members 2>/dev/null || true)
-        missing=0
-        for node in "${ALL_NODES[@]}"; do
-            grep -q "$node" <<<"$members" || missing=1
+    step 0 "Waiting for every node to come back configured..."
+    # Asks each machine directly, by address, and expects it to answer with the
+    # hostname its patch assigns. That is what has to be true before etcd is
+    # bootstrapped: the config took, the node rebooted into it, and the machine
+    # at that address is the one we think it is.
+    #
+    # This used to wait on `talosctl get members`, which was wrong twice over.
+    # It queried through the configured endpoint list rather than each node, so
+    # apid refused it with `PermissionDenied: no request forwarding` — the same
+    # thing that broke the bootstrap call. And membership comes from the
+    # discovery service, because the Kubernetes registry is disabled: a cold
+    # rebuild would have been waiting on discovery.talos.dev being reachable,
+    # before the cluster it is trying to rebuild even exists.
+    #
+    # Each node installs to disk and reboots first, so the window is generous.
+    for idx in "${!ALL_NODES[@]}"; do
+        want="${ALL_NODES[$idx]}"
+        addr="${NODE_ADDRS[$idx]:-${want}.${DOMAIN}}"
+        echo -n "  $want ($addr)... "
+        node_err=""
+        for i in $(seq 1 60); do
+            got=$(talosctl -n "$addr" -e "$addr" get hostname \
+                    -o jsonpath='{.spec.hostname}' 2>"$TALOS_GEN_DIR/hostname.err") || true
+            node_err=$(cat "$TALOS_GEN_DIR/hostname.err")
+            [[ "$got" == "$want" ]] && break
+            sleep 10
+            if [[ $i -eq 60 ]]; then
+                echo
+                [[ -n "$node_err" ]] && echo "  last talosctl error: $node_err" >&2
+                fail "$addr never came back as $want (last answer: '${got:-none}')"
+            fi
        done
-        [[ $missing -eq 0 ]] && break
-        sleep 5
-        [[ $i -eq 30 ]] && fail "Talos cluster didn't form"
+        ok
    done

    echo -n "Bootstrapping Kubernetes... "
-    talosctl bootstrap 2>/dev/null || true
+    # -n AND -e on one control plane, deliberately. etcd bootstrap is the one
+    # call apid refuses to forward: reached through any other node it fails with
+    # `PermissionDenied: no request forwarding`. Without them talosctl picks an
+    # endpoint from the configured list — with more than one control plane, or a
+    # list that includes workers, that is a coin flip.
+    if [[ ${#NODE_ADDRS[@]} -gt 0 ]]; then
+        bootstrap_target="${NODE_ADDRS[0]}"
+    else
+        bootstrap_target="${NODES[0]}.${DOMAIN}"
+    fi
+    # Re-running against an already-bootstrapped cluster is not an error and is
+    # the reason for `|| true` — but that used to swallow every other reason as
+    # well, and the run carried on to fail somewhere further downstream with no
+    # trace of the actual cause. Anything that is not "already exists" is shown.
+    if ! bootstrap_err=$(talosctl bootstrap -n "$bootstrap_target" -e "$bootstrap_target" 2>&1); then
+        grep -qi 'already\|AlreadyExists' <<<"$bootstrap_err" \
+            || echo -e "\n${YELLOW}bootstrap reported:${NC} ${bootstrap_err//$'\n'/ | }"
+    fi
    ok

    echo -n "Getting kubeconfig... "
+    kubeconfig_err=""
    for i in $(seq 1 30); do
-        if talosctl kubeconfig ~/.kube/config --force 2>/dev/null; then
-            sed -i "s|server:.*|server: https://${K8S_API_HOST}:6443|" ~/.kube/config
+        mkdir -p "$(dirname "$KUBECONFIG_PATH")"
+        if kubeconfig_err=$(talosctl kubeconfig "$KUBECONFIG_PATH" --force 2>&1); then
+            sed -i "s|server:.*|server: https://${K8S_API_HOST}:6443|" "$KUBECONFIG_PATH"
            break
        fi
        sleep 5
-        [[ $i -eq 30 ]] && fail "Couldn't get kubeconfig"
+        # Held back while retrying — the first attempts fail by design — but
+        # printed if it never works, because that message is the diagnosis.
+        [[ $i -eq 30 ]] && { echo; echo "$kubeconfig_err" >&2; fail "Couldn't get kubeconfig"; }
    done
    ok

+    echo -n "Waiting for the Kubernetes API to answer... "
+    # Having a kubeconfig is not the same as having an apiserver. `talosctl
+    # kubeconfig` succeeds as soon as Talos can hand out credentials, which is
+    # before kube-apiserver is serving on the endpoint the file points at — so
+    # the very next command could fail with an EOF against a port nothing is
+    # listening on yet. On hardware the gap usually closes on its own; on a
+    # scratch cluster it does not, which is how this was found.
+    # `get --raw /version` needs the server; `kubectl version` would answer from
+    # the client alone and pass against nothing at all.
+    api_err=""
+    for i in $(seq 1 60); do
+        api_err=$(kubectl get --raw /version 2>&1) && break
+        sleep 5
+        if [[ $i -eq 60 ]]; then
+            echo "$api_err" >&2
+            fail "Kubernetes API at https://${K8S_API_HOST}:6443 never answered"
+        fi
+    done
+    ok
+
+    step 0 "Installing Cilium (CNI)..."
+    # Must run before the node-Ready wait below: with `cni: none` the kubelet
+    # reports NotReady until a CNI is present, so that loop would time out.
+    #
+    # Chart repo, version constraint and values all come out of the HelmRelease
+    # so this cannot drift from what Flux will reconcile minutes later. helm
+    # accepts the semver range verbatim and resolves it the same way Flux does.
+    #
+    # serviceMonitor is the one override, and it is a bootstrap constraint
+    # rather than a value: its CRD arrives with the monitoring stack much
+    # later, and the object would fail to apply. Nothing else is overridden,
+    # which is what lets helm-controller adopt this release instead of
+    # replacing it.
+    CILIUM_VALUES=$(mktemp)
+    yq 'select(.kind == "HelmRelease") | .spec.values' "$CILIUM_HR" > "$CILIUM_VALUES"
+    grep -q 'policyMapMax' "$CILIUM_VALUES" \
+        || fail "extracted Cilium values look wrong (no policyMapMax) — check $CILIUM_HR"
+
+    helm repo add cilium "$(yq -r 'select(.kind == "HelmRepository") | .spec.url' "$CILIUM_HR")" >/dev/null
+    helm repo update cilium >/dev/null
+    helm upgrade --install cilium cilium/cilium \
+        --version "$(yq -r 'select(.kind == "HelmRelease") | .spec.chart.spec.version' "$CILIUM_HR")" \
+        --namespace kube-system \
+        -f "$CILIUM_VALUES" \
+        --set prometheus.serviceMonitor.enabled=false \
+        --wait --timeout 10m
+    rm -f "$CILIUM_VALUES"
+    ok
+
    step 0 "Waiting for K8s nodes..."
    expected=${#ALL_NODES[@]}
+    nodes_err=""
    for i in $(seq 1 60); do
-        ready=$(kubectl get nodes --no-headers 2>/dev/null | grep -c "Ready" || true)
+        # The STATUS column, matched whole. `grep -c Ready` counted NotReady
+        # too — the substring is in it — so this waited for nodes to register
+        # rather than to become ready, and passed while every one of them was
+        # still NotReady.
+        nodes_out=$(kubectl get nodes --no-headers 2>"$TALOS_GEN_DIR/nodes.err") || true
+        nodes_err=$(cat "$TALOS_GEN_DIR/nodes.err")
+        ready=$(awk '$2 == "Ready"' <<<"$nodes_out" | grep -c . || true)
        if [[ "$ready" -eq "$expected" ]]; then
            break
        fi
        sleep 5
-        [[ $i -eq 60 ]] && fail "Not all nodes ready (got $ready/$expected)"
+        if [[ $i -eq 60 ]]; then
+            echo
+            [[ -n "$nodes_err" ]] && echo "last kubectl error: $nodes_err" >&2
+            echo "${nodes_out:-  (no nodes listed)}" >&2
+            fail "Not all nodes ready (got $ready/$expected)"
+        fi
    done

-    # Stash configs for subsequent phases / export-access step
-    mkdir -p "$ACCESS_STAGING"
-    cp ~/.talos/config "$ACCESS_STAGING/talosconfig"
-    cp ~/.kube/config  "$ACCESS_STAGING/kubeconfig"
-    echo -e "${GREEN}Talos phase complete.${NC} Access files in $ACCESS_STAGING/"
+    # Stash configs for subsequent phases / export-access step. Skipped under
+    # vmtest: those are a throwaway cluster's credentials, and writing them here
+    # would leave the flux phase pointed at VMs that no longer exist.
+    if [[ "${VMTEST:-0}" == "1" ]]; then
+        # Nodes being Ready says nothing about storage. The CephCluster picks
+        # OSD nodes by a label out of the machine config and their device by the
+        # partition label RawVolumeConfig creates, so assert both here — running
+        # it by hand afterwards races the teardown, and a test that does not
+        # check its own premise is worth little.
+        step 0 "Checking the OSD prerequisites Ceph selects on..."
+        for idx in $(seq "${#NODES[@]}" $(( ${#ALL_NODES[@]} - 1 ))); do
+            vm_node="${ALL_NODES[$idx]}"
+            vm_addr="${NODE_ADDRS[$idx]}"
+            vols=$(talosctl -n "$vm_addr" -e "$vm_addr" get discoveredvolumes 2>&1) \
+                || fail "could not read volumes from $vm_node ($vm_addr): ${vols//$'\n'/ | }"
+            awk '$NF == "r-ceph-osd" {found=1} END {exit !found}' <<<"$vols" \
+                || fail "$vm_node has no r-ceph-osd partition — RawVolumeConfig did not take"
+            kubectl get node "$vm_node" \
+                -o jsonpath='{.metadata.labels.storage\.renner\.uno/ceph-osd}' \
+                | grep -q true \
+                || fail "$vm_node is missing the storage.renner.uno/ceph-osd label"
+            echo -e "  $vm_node: partition and label ${GREEN}(OK)${NC}"
+        done
+
+        echo -e "${GREEN}VM rebuild test passed.${NC} ${#ALL_NODES[@]} nodes Ready on the repo's own config."
+    else
+        mkdir -p "$ACCESS_STAGING"
+        cp "$TALOSCONFIG_PATH" "$ACCESS_STAGING/talosconfig"
+        cp "$KUBECONFIG_PATH"  "$ACCESS_STAGING/kubeconfig"
+        echo -e "${GREEN}Talos phase complete.${NC} Access files in $ACCESS_STAGING/"
+    fi
 fi

 # Helper: load staged access files into home dir (for later CI steps)
@@ -228,7 +514,7 @@ if phase_runs flux; then
        flux bootstrap github \
            --owner="$GITHUB_OWNER" \
            --repository="$GITHUB_REPO" \
-            --branch=master \
+            --branch="$FLUX_BRANCH" \
            --path="$FLUX_PATH" \
            --components-extra=image-reflector-controller,image-automation-controller \
            --personal \
@@ -239,7 +525,7 @@ if phase_runs flux; then
            --hostname="$GITEA_HOST" \
            --owner="$GITEA_OWNER" \
            --repository="$GITEA_REPO" \
-            --branch=master \
+            --branch="$FLUX_BRANCH" \
            --path="$FLUX_PATH" \
            --components-extra=image-reflector-controller,image-automation-controller \
            --personal \
@@ -0,0 +1,22 @@
+apiVersion: kustomize.toolkit.fluxcd.io/v1
+kind: Kustomization
+metadata:
+  name: llama-server
+  namespace: flux-system
+spec:
+  interval: 10m
+  retryInterval: 1m
+  # On a cold PVC the chat model pulls ~19 GiB of GGUF weights from Hugging
+  # Face and then loads onto the iGPU before /health goes green, so a first
+  # start is far slower than a normal app's.
+  timeout: 60m
+  sourceRef:
+    kind: GitRepository
+    name: flux-system
+  path: ./kubernetes/apps/llama-server
+  prune: true
+  wait: true
+  dependsOn:
+    - name: infrastructure
+    - name: infrastructure-crds
+    - name: infrastructure-ceph-cluster
@@ -524,6 +524,109 @@ check "alertmanager: no severity=critical alerts active" bash -c '
    test "$body" = "[]"
 '

+# ---------------------------------------------------------------------------
+# Local AI inference. Every check here corresponds to a defect that actually
+# shipped, because none of them are catchable by manifest validation — the
+# manifests were valid in each case and the endpoint still misbehaved.
+# ---------------------------------------------------------------------------
+
+export LB_IP
+
+# helper_post: POST JSON from inside e2e-helper, for Services with no ingress.
+# kubectl exec passes argv directly, so the JSON needs no shell quoting.
+helper_post() {
+    local url="$1" data="$2" out body code attempt
+    for attempt in 1 2 3; do
+        out=$(kubectl -n monitoring exec e2e-helper -- \
+              curl -sk --max-time 60 -H 'Content-Type: application/json' \
+              -d "$data" -w $'\n__CODE__:%{http_code}' "$url" 2>&1)
+        body=${out%$'\n'__CODE__:*}
+        code=${out##*__CODE__:}
+        printf 'attempt=%s code=%s body=%s\n' "$attempt" "$code" "${body:0:200}"
+        if [[ "$code" =~ ^2[0-9][0-9]$ ]]; then
+            printf '%s' "$body" > /tmp/helper_body
+            return 0
+        fi
+        sleep 5
+    done
+    return 1
+}
+export -f helper_post
+
+# llm_chat: POST a chat completion to llama-server from inside the cluster.
+# It goes to the Service, not the public hostname: llm.renner.uno now answers
+# with an Authentik redirect, and the API is deliberately in-cluster only —
+# which is also how every real consumer reaches it. Result lands in
+# /tmp/helper_body.
+llm_chat() {
+    local prompt="$1" max="${2:-64}"
+    helper_post "http://llama-server.ai.svc.cluster.local:8080/v1/chat/completions" \
+        "$(jq -nc --arg p "$prompt" --argjson n "$max" \
+            '{model:"qwen3.6-35b-a3b",messages:[{role:"user",content:$p}],max_tokens:$n,temperature:0}')"
+}
+export -f llm_chat
+
+echo "=== Local AI inference ==="
+
+# The gate is the whole of the access control on the public hostname:
+# llama-server has no authentication and serves the API on the same port as the
+# UI. An anonymous request must be bounced to Authentik, never answered. A 200
+# here would mean the ingress is reaching llama-server directly again.
+check "public hostname is gated by authentik" \
+    bash -c 'code=$(curl -sk --resolve "llm.renner.uno:443:$LB_IP" --max-time 15 \
+                 -o /dev/null -w "%{http_code}" "https://llm.renner.uno/v1/models")
+             echo "got=$code"; [[ "$code" =~ ^(302|307|401|403)$ ]]'
+
+# Asserts the id specifically, not merely that the string appears somewhere:
+# every configured name shows up in the `aliases` array regardless of order, so
+# a substring match passes even when the picker is showing the wrong one.
+check "descriptive name is the advertised id" \
+    bash -c 'helper_curl "http://llama-server.ai.svc.cluster.local:8080/v1/models" &&
+             jq -e ".data[0].id == \"qwen3.6-35b-a3b\"" /tmp/helper_body >/dev/null'
+
+# Only one name is configured. A second would be advertised alongside it and,
+# if it sorted first, would take the id — which is what a picker displays.
+check "no second name competes for the id" \
+    bash -c 'jq -e ".data[0].aliases | length == 1" /tmp/helper_body >/dev/null'
+
+# Regression: the embedding model used to share this port. It appeared in the
+# chat picker, and selecting it returned fluent nonsense ("capital capital
+# capital ...") instead of an error, because --embeddings does not refuse chat
+# completions. It now lives on a separate Service; if it ever reappears here,
+# it is selectable again and this must fail.
+check "embedding model absent from chat endpoint" \
+    bash -c '! grep -qi embed /tmp/helper_body'
+
+# Regression: with thinking enabled by default the model spent its whole token
+# budget on reasoning_content and returned an EMPTY content with
+# finish_reason "length" — a 200 response that answers nothing. Asserting on
+# the status code alone would have passed.
+check "chat completion returns non-empty content" \
+    bash -c 'llm_chat "Nenne die Hauptstadt von Frankreich." 64 &&
+             jq -e ".choices[0].message.content | length > 0" /tmp/helper_body >/dev/null'
+
+check "chat completion stops rather than truncating" \
+    bash -c 'jq -e ".choices[0].finish_reason == \"stop\"" /tmp/helper_body >/dev/null'
+
+# Coherence, not just liveness. This is what catches a model answering from the
+# wrong weights or a numerically broken backend — llama-bench measures
+# throughput and would report excellent numbers while emitting garbage.
+check "chat answer is coherent (knows Paris)" \
+    bash -c 'jq -re ".choices[0].message.content" /tmp/helper_body | grep -qi paris'
+
+# Reached from the monitoring namespace, which ai-ns.yaml admits; there is no
+# ingress for this Service by design.
+check "llama-embed returns an embedding vector" \
+    bash -c 'helper_post "http://llama-embed.ai.svc.cluster.local:8080/v1/embeddings" \
+                 "{\"model\":\"embed\",\"input\":\"Testsatz\"}" &&
+             jq -e ".data[0].embedding | length > 0" /tmp/helper_body >/dev/null'
+
+# Guards the resource request silently disappearing: without it the pod still
+# runs, just on CPU, and only a throughput measurement would notice.
+check "llama-server holds an iGPU allocation" \
+    bash -c 'kubectl -n ai get deploy llama-server -o json |
+             jq -e ".spec.template.spec.containers[0].resources.limits[\"gpu.intel.com/i915\"]" >/dev/null'
+
 echo "=== Authentik OIDC discovery (per-app) ==="
 # A reachable, parseable .well-known proves Authentik has an OIDC provider
 # bound to that application slug. If the app config is missing or Authentik
@@ -33,22 +33,21 @@ spec:
    remediation:
      retries: 3
  values:
-    # Roll the agent DaemonSet when cilium-config changes. Cilium reads
-    # datapath options once, at agent start, and the chart puts no config
-    # checksum on the pod template — so a changed ConfigMap leaves every agent
-    # running the previous datapath until something restarts it. Nothing did.
+    # THIS IS THE ONLY PLACE CILIUM IS CONFIGURED. Talos used to carry a
+    # rendered copy as a bootstrap inline manifest, so every setting existed
+    # two or three times and nothing enforced agreement — see
+    # PROPOSAL-cilium-single-owner.md for what that cost. Talos now provides
+    # only `cni: none` and `proxy: disabled`; a cold rebuild installs Cilium
+    # from these values with helm before Flux takes over.
    #
-    # This is not hypothetical. vlan-bpf-bypass reached cilium-config and every
-    # v30iot macvlan workload stayed broken until the agents were deleted by
-    # hand, one node at a time (issue #592). policyMapMax has the same
-    # exposure, and its comment below says "takes effect on agent restart" —
-    # documentation standing in for automation.
+    # Rolls the agent DaemonSet when cilium-config changes. Cilium reads
+    # datapath options once at agent start and the chart puts no config
+    # checksum on the pod template, so without this a changed ConfigMap leaves
+    # every agent on the previous datapath indefinitely (#592).
    #
-    # The trade: any cilium-config change now rolls the CNI cluster-wide,
-    # node by node. That is disruptive-ish, but it is what a datapath change
-    # already required — the difference is that it now happens on its own
-    # instead of being forgotten. Reloader is already deployed for exactly
-    # this pattern; named per-ConfigMap rather than blanket, as elsewhere.
+    # The trade is that any cilium-config change now rolls the CNI node by
+    # node — which is what a datapath change required anyway, only now it is
+    # not forgotten.
    annotations:
      configmap.reloader.stakater.com/reload: cilium-config
    # Which pod labels feed security-identity computation. Patterns are
@@ -58,8 +57,6 @@ spec:
    # and every identity costs one entry per allowed (direction, proto, port)
    # in every endpoint's policy map, cluster-wide. Nothing selects on these
    # labels in policy, so they buy identity churn and nothing else.
-    # Keep in lockstep with kubernetes/talos/patches/cilium-cni.yaml and
-    # kubernetes/talos/cilium.yaml.
    labels: '!woodpecker-ci\.org/.* !step$'
    ipv6:
      enabled: true
@@ -69,57 +66,38 @@ spec:
    socketLB:
      enabled: true
    prometheus:
-      # The agent exported no metrics at all, so BPF map utilisation was
-      # invisible: when per-endpoint policy maps (cilium_policy_v3_*) run out
-      # of space the agent only says "no space left on device" in its log and
-      # pod sandbox creation fails (issue #452). cilium_bpf_map_pressure makes
-      # that observable — and alertable — before it stalls a rollout.
+      # Without agent metrics, BPF map utilisation is invisible: a full policy
+      # map only shows up as "no space left on device" in the log while pod
+      # sandbox creation fails (#452). cilium_bpf_map_pressure makes it
+      # alertable beforehand.
      enabled: true
      serviceMonitor:
        enabled: true
    bpf:
-      # Size of each endpoint's own cilium_policy_v3_<id> map, holding one
-      # entry per (identity, direction, protocol, port) the endpoint is
-      # allowed. When it fills, endpoint regeneration fails with "no space
-      # left on device", the CNI ADD call never returns, and the pod is stuck
-      # in sandbox creation — so this must stay comfortably above the busiest
-      # endpoint's entry count, tracked by cilium_bpf_map_pressure.
-      # Takes effect on agent restart; the map is sized at creation.
-      # Bootstrap installs Cilium from the inline manifest in
-      # kubernetes/talos/patches/cilium-cni.yaml, so bpf-policy-map-max there
-      # must move with this value or a cold rebuild starts with the old size.
-      # kubernetes/talos/cilium.yaml carries a third copy of the same key.
-      # Nothing enforces any of this; grep bpf-policy-map-max before changing it.
+      # Per-endpoint policy map size: one entry per (identity, direction,
+      # protocol, port) allowed. When it fills, endpoint regeneration fails
+      # with "no space left on device" and the pod hangs in sandbox creation.
+      # Keep it comfortably above the busiest endpoint, watched by
+      # cilium_bpf_map_pressure. Sized at map creation, so it takes an agent
+      # restart.
+      #
      policyMapMax: 65536
      # VLAN ids the eBPF datapath is allowed to pass. Without this it drops
      # VLAN-tagged frames, accounted as "VLAN traffic disallowed by VLAN
      # filter" in cilium_drop_count_total.
      #
-      # 30 is v30iot, the macvlan parent for the shelly-manager, matter-server,
-      # otbr and music-assistant attachments. On bare metal it is a VLAN
-      # sub-interface of enp2s0f0np0; inside the former Proxmox guests it was
-      # an untagged virtio NIC, which is why this was not needed before.
+      # Only VLAN 30 (v30iot) needs listing. Cilium attaches to devices that
+      # carry an address, so it sees mgmt0's frames already untagged by the
+      # 8021q layer — nothing for a VLAN filter to match. ens19 is deliberately
+      # address-less, so its frames only meet the filter on the shared parent,
+      # still tagged. Adding 40 would change nothing and would touch the
+      # datapath carrying etcd and the API.
      #
-      # VLAN 40 (mgmt0) is deliberately NOT listed, and the asymmetry is the
-      # interesting part. Cilium attaches to devices that carry an address —
-      # `cilium-dbg status --verbose` lists enp87s0, enp2s0f0np0, enp2s0f1np1
-      # and mgmt0, but NOT ens19. mgmt0 holds the node IP, so Cilium owns it as
-      # a device and sees frames the 8021q layer has already untagged; nothing
-      # for a VLAN filter to match. ens19 is deliberately address-less (see
-      # talos/patches/k8s-1.yaml — host addresses on that L2 make node replies
-      # bypass the UDM), so Cilium never attaches to it and VLAN 30 frames only
-      # meet the filter on the shared parent, still tagged.
+      # The symptom when this is wrong is not a DHCP timeout: a tc-layer drop
+      # reaches an AF_PACKET sender as ENOBUFS, so the CNI dhcp plugin reports
+      # "no buffer space available" (#592).
      #
-      # So the fix belongs on 30 alone. Listing 40 would change nothing, and
-      # would touch the datapath carrying etcd and the API for no reason.
-      #
-      # A tc-layer drop surfaces to an AF_PACKET sender as ENOBUFS, so the
-      # symptom is the CNI dhcp plugin reporting "no buffer space available"
-      # rather than a DHCP timeout. See issue #592.
-      #
-      # Same three-copy problem as policyMapMax above: vlan-bpf-bypass in
-      # kubernetes/talos/cilium.yaml and kubernetes/talos/patches/cilium-cni.yaml
-      # must move with this list. Takes effect on agent restart.
+      # Same three-copy problem as policyMapMax above. Takes an agent restart.
      vlanBypass: [30]
      # Let pods reach the cluster's own LoadBalancer external IPs; Cilium
      # redirects the socket directly to the backend pod instead of sending
@@ -163,3 +141,28 @@ spec:
      enabled: true
    externalIPs:
      enabled: true
+    # BGP to the UDM. The peering itself has always been in git as CRDs in
+    # post-crds/cilium-bgp.yaml — but the switch that starts the control plane
+    # was not, and neither were the CIDRs below. They were applied by hand and
+    # held by the `kubectl-patch` field manager on cilium-config. Server-side
+    # apply left them alone, so nothing broke and nothing noticed; a cold
+    # rebuild would have come up with BGP off while the CRDs said otherwise.
+    #
+    # This is not a free change of ownership. Enabling bgpControlPlane through
+    # the chart also emits companion keys the hand-patch never set —
+    # bgp-secrets-namespace, bgp-router-id-allocation-mode and -ip-pool,
+    # enable-bgp-control-plane-status-report, enable-bgp-legacy-origin-attribute
+    # — so Cilium has been running on its own defaults for those. Router-id
+    # allocation is the one to watch: if the chart's default disagrees with
+    # Cilium's, the sessions re-establish.
+    bgpControlPlane:
+      enabled: true
+    # Masquerading exception, not a routing statement: pod traffic to these
+    # ranges leaves unmasqueraded, so LAN services see real pod IPs. That only
+    # works because BGP advertises the pod CIDRs, which is what gives the UDM a
+    # route back. The two settings are one decision and have to move together.
+    #
+    # Pod CIDRs are 10.244.0.0/16 and fd10:244::/48 (talos/patches/cluster.yaml);
+    # the supernets here cover the LAN as well, which is the point.
+    ipv4NativeRoutingCIDR: 10.0.0.0/8
+    ipv6NativeRoutingCIDR: fd00::/8
@@ -36,25 +36,16 @@ spec:
  values:
    container_runtime: containerd

-    # --- mTLS between agents and the LAPI: the durable fix for the recurring
-    # KubeDaemonSetRolloutStuck auth loop (#340) ---
+    # mTLS between agents and the LAPI. Do not switch back to password auth:
+    # the LAPI runs without persistence, so its machine-registration DB is
+    # wiped on every restart, and password-registered agents then get 401
+    # "machine not found" and crashloop until re-registered by hand — which
+    # wedges the whole `infrastructure` Kustomization behind a HelmRelease
+    # that never goes Ready (#340).
    #
-    # The LAPI runs WITHOUT persistence (see persistentVolume note below), so
-    # its sqlite machine-registration DB is ephemeral and every LAPI pod restart
-    # wiped it. Under the old password flow the agents registered exactly ONCE
-    # (init container running `cscli lapi register --token`) and cached a
-    # password the wiped LAPI no longer recognised -> 401 "machine not found"
-    # -> CrashLoopBackOff on all three agents -> DaemonSet never Ready -> the
-    # crowdsec HelmRelease upgrade `--wait` times out forever -> the whole
-    # `infrastructure` Kustomization (and every app depending on it) stays
-    # unhealthy. That is the #340 outage.
-    #
-    # With client-cert auth the agent init container no longer registers at all
-    # (verified via `helm template`: the `cscli lapi register` step is gone).
-    # The agent presents a cert whose OU (agent-ou) the LAPI trusts, and a
-    # freshly restarted LAPI with an EMPTY DB auto-recreates each machine record
-    # from the presented cert on connect. So the system self-heals across LAPI
-    # restarts with no PVC, no Ceph, and no manual re-registration.
+    # With client certs the agent never registers: a restarted LAPI with an
+    # empty DB recreates each machine record from the presented cert, so this
+    # self-heals with no PVC and no intervention.
    #
    # cert-manager (already reconciled earlier in this same `infrastructure`
    # stage) provisions a fully self-contained self-signed CA (selfSigned
@@ -87,13 +78,10 @@ spec:

    lapi:
      replicas: 1
-      # The chart defaults request 500m. Measured steady-state draw is 2m, and
-      # the request is what the scheduler reserves, so the default parks half a
-      # core of unusable capacity per LAPI. That is affordable on three nodes
-      # and is not on two: with one node out for maintenance the remaining pair
-      # sit at 100% of requested CPU while actually using ~22%, and nothing new
-      # can be placed. The limit stays at the chart default so a log flood can
-      # still burst; only the reservation shrinks.
+      # Far below the chart default, which reserves half a core per LAPI for a
+      # workload that draws single-digit millicores — enough to leave the
+      # cluster unschedulable with one node out. Only the reservation shrinks;
+      # the limit stays at the chart default so a log flood can still burst.
      resources:
        requests:
          cpu: 50m
@@ -33,3 +33,16 @@ spec:
    crds: CreateReplace
    remediation:
      retries: 3
+  values:
+    # The chart ships these disabled, so the controller ran with no probe of
+    # any kind: a wedged reconciler stayed Ready and every ExternalSecret would
+    # simply stop refreshing, which surfaces only when a consumer needs a
+    # credential that has since rotated.
+    #
+    # Enabling them also starts the health server — the chart derives
+    # --health-probe-bind-address from these values, and without them the
+    # controller exposes nothing but its metrics port.
+    livenessProbe:
+      enabled: true
+    readinessProbe:
+      enabled: true
--- a/Show More
+++ b/Show More