kubernetes/infrastructure/cilium/helmrelease.yaml

@@ -95,19 +95,20 @@ spec:
       # VLAN-tagged frames, accounted as "VLAN traffic disallowed by VLAN
       # filter" in cilium_drop_count_total.
       #
-      # Only VLAN 30 (v30iot) needs listing. Cilium attaches to devices that
-      # carry an address, so it sees mgmt0's frames already untagged by the
-      # 8021q layer — nothing for a VLAN filter to match. ens19 is deliberately
-      # address-less, so its frames only meet the filter on the shared parent,
-      # still tagged. Adding 40 would change nothing and would touch the
-      # datapath carrying etcd and the API.
+      # Only the address-less macvlan parents need listing: VLAN 30 (ens19,
+      # v30iot) and VLAN 11 (radius0, freeradius-udm). Cilium attaches to
+      # devices that carry an address, so it sees mgmt0's frames already
+      # untagged by the 8021q layer — nothing for a VLAN filter to match.
+      # ens19 and radius0 are deliberately address-less, so their frames only
+      # meet the filter on the shared parent, still tagged. Adding 40 would
+      # change nothing and would touch the datapath carrying etcd and the API.
       #
       # The symptom when this is wrong is not a DHCP timeout: a tc-layer drop
       # reaches an AF_PACKET sender as ENOBUFS, so the CNI dhcp plugin reports
       # "no buffer space available" (#592).
       #
       # Same three-copy problem as policyMapMax above. Takes an agent restart.
-      vlanBypass: [30]
+      vlanBypass: [30, 11]
       # Let pods reach the cluster's own LoadBalancer external IPs; Cilium
       # redirects the socket directly to the backend pod instead of sending
       # traffic out to the VIP and back (which fails with L2 announcements).

kubernetes/talos/patches/k8s-1.yaml

@@ -8,6 +8,10 @@ machine:
     # 10.2.30.0/24 route makes node replies bypass the UDM and breaks every
     # DNATed flow.
     net.ipv6.conf.ens19.disable_ipv6: "1"
+    # radius0 (VLAN 11) is LINK ONLY as well: the macvlan parent for the
+    # FreeRADIUS attachment. VLAN 11 announces RAs; the node must not
+    # autoconfigure from them.
+    net.ipv6.conf.radius0.disable_ipv6: "1"
     # These two sit on the untagged fallback network, where nothing may run.
     # Left enabled they autoconfigure a ULA and an IPv6 default route from its
     # RAs, which ties with mgmt0's and costs the cluster IPv6 egress.
@@ -168,6 +172,17 @@ vlanID: 30
 parent: uplink
 up: true
 ---
+# VLAN 11, UniFi "(11) RADIUS": link only, no addresses, no DHCP. Macvlan
+# parent of the freeradius-udm attachment
+# (kubernetes/apps/authentik/freeradius-network-attachment.yaml), which names
+# it as `master`; renaming this link means editing that too.
+apiVersion: v1alpha1
+kind: VLANConfig
+name: radius0
+vlanID: 11
+parent: uplink
+up: true
+---
 # Pod network, VLAN 48. Node-to-node only: the VXLAN overlay rides it once the
 # kubelet node IP moves here, and nothing on it is routed off the switch.
 #

kubernetes/talos/patches/k8s-2.yaml

@@ -7,6 +7,8 @@ machine:
     # macvlan parent for the v30iot pod attachments; host addresses on that L2
     # make node replies bypass the UDM and break every UDM-DNATed flow.
     net.ipv6.conf.ens19.disable_ipv6: "1"
+    # radius0 (VLAN 11): link only — see k8s-1.yaml.
+    net.ipv6.conf.radius0.disable_ipv6: "1"
     # Same for the physical ports on the untagged fallback network: left
     # enabled they take an IPv6 default route from its RAs and cost the
     # cluster IPv6 egress.
@@ -115,6 +117,14 @@ vlanID: 30
 parent: uplink
 up: true
 ---
+# VLAN 11, "(11) RADIUS": link only, no host addressing — see k8s-1.yaml.
+apiVersion: v1alpha1
+kind: VLANConfig
+name: radius0
+vlanID: 11
+parent: uplink
+up: true
+---
 # Pod network, VLAN 48. Node-to-node only, statically addressed, no gateway
 # and no DHCP — see k8s-1.yaml.
 apiVersion: v1alpha1

kubernetes/talos/patches/k8s-3.yaml

@@ -4,6 +4,8 @@ machine:
   sysctls:
     # v30iot NIC carries no host addressing — see k8s-1.yaml.
     net.ipv6.conf.ens19.disable_ipv6: "1"
+    # radius0 (VLAN 11): link only — see k8s-1.yaml.
+    net.ipv6.conf.radius0.disable_ipv6: "1"
     # Same for the physical ports on the untagged fallback network — see
     # k8s-1.yaml.
     net.ipv6.conf.uplink.disable_ipv6: "1"
@@ -102,6 +104,14 @@ vlanID: 30
 parent: uplink
 up: true
 ---
+# VLAN 11, "(11) RADIUS": link only, no host addressing — see k8s-1.yaml.
+apiVersion: v1alpha1
+kind: VLANConfig
+name: radius0
+vlanID: 11
+parent: uplink
+up: true
+---
 # Pod network, VLAN 48. Node-to-node only, statically addressed, no gateway
 # and no DHCP — see k8s-1.yaml.
 apiVersion: v1alpha1