ansible/roles/edge-host/defaults/main.yml

@@ -41,6 +41,14 @@ edge_open3e_devices:
   vx3: { tx: "0x6a1", dpList: "vx3" }
   vcmu: { tx: "0x68c" }
 
+# --- E3onCAN: passive E380 energy-meter listener (no bus writes, so it
+# coexists with the single open3e instance). The meter broadcasts at
+# ~5 Hz; the gap throttles MQTT to one update per DID per interval.
+edge_e3oncan_repo: https://github.com/MyHomeMyData/E3onCAN.git
+edge_e3oncan_version: 461dcbdf97e8d72d2edb9929c63b39382af6c3a1  # V0.5.2
+edge_e3oncan_gap_seconds: 10
+edge_e3oncan_mqtt_format: "{device}_{didNumber:04d}_{didName}"
+
 # --- Secrets: define these in inventory/group_vars/edge_host/vault.yml
 # (ansible-vault). See README.md for the kubectl one-liners that read the
 # current values out of the cluster during migration.

ansible/roles/edge-host/handlers/main.yml

@@ -17,3 +17,9 @@
     name: open3e
     state: restarted
     daemon_reload: true
+
+- name: Restart e3oncan
+  ansible.builtin.systemd:
+    name: e3oncan
+    state: restarted
+    daemon_reload: true

ansible/roles/edge-host/tasks/main.yml

@@ -152,3 +152,34 @@
     enabled: true
     state: started
     daemon_reload: true
+
+# --- E3onCAN: direct E380 meter reads (passive; per-review decision not
+# to trust the VX3's relayed meter values). Same broker user as open3e;
+# topics land under the same open3e/ prefix as e380_<did>_<name>.
+- name: Check out E3onCAN (pinned)
+  ansible.builtin.git:
+    repo: "{{ edge_e3oncan_repo }}"
+    dest: "{{ edge_base_dir }}/e3oncan/src"
+    version: "{{ edge_e3oncan_version }}"
+  notify: Restart e3oncan
+
+- name: Create E3onCAN venv with requirements
+  ansible.builtin.pip:
+    requirements: "{{ edge_base_dir }}/e3oncan/src/requirements.txt"
+    virtualenv: "{{ edge_base_dir }}/e3oncan/venv"
+    virtualenv_command: python -m venv
+  notify: Restart e3oncan
+
+- name: Deploy e3oncan systemd unit
+  ansible.builtin.template:
+    src: e3oncan.service.j2
+    dest: /etc/systemd/system/e3oncan.service
+    mode: "0644"
+  notify: Restart e3oncan
+
+- name: Enable e3oncan
+  ansible.builtin.systemd:
+    name: e3oncan
+    enabled: true
+    state: started
+    daemon_reload: true

ansible/roles/edge-host/templates/e3oncan.service.j2

@@ -0,0 +1,31 @@
+# Managed by ansible (roles/edge-host).
+# PASSIVE listener for the E380 energy meter's CANopen broadcasts — no
+# writes on the bus, so it may run alongside the (single) open3e
+# instance. Reads the meter directly instead of trusting the VX3's
+# relayed values.
+[Unit]
+Description=E3onCAN E380 energy-meter CAN listener (read-only)
+BindsTo=sys-subsystem-net-devices-{{ edge_can_interface }}.device
+After=sys-subsystem-net-devices-{{ edge_can_interface }}.device network-online.target
+Wants=network-online.target
+
+[Service]
+User=open3e
+EnvironmentFile={{ edge_base_dir }}/open3e/open3e.env
+WorkingDirectory={{ edge_base_dir }}/e3oncan
+# Journald-friendly (python block-buffers pipes; lost on restarts).
+Environment=PYTHONUNBUFFERED=1
+ExecStart={{ edge_base_dir }}/e3oncan/venv/bin/python {{ edge_base_dir }}/e3oncan/src/E3onCANcollect.py \
+  -c {{ edge_can_interface }} \
+  -dev e380 \
+  -g {{ edge_e3oncan_gap_seconds }} \
+  -m {{ edge_mqtt_host }}:{{ edge_mqtt_port }}:{{ edge_open3e_mqtt_topic }} \
+  -muser {{ edge_open3e_mqtt_user }} \
+  -mpass ${OPEN3E_MQTT_PASSWORD} \
+  -mfstr "{{ edge_e3oncan_mqtt_format }}" \
+  -j
+Restart=on-failure
+RestartSec=10
+
+[Install]
+WantedBy=multi-user.target

ansible/roles/edge-host/templates/open3e.env.j2

@@ -1,4 +1,7 @@
-# Managed by ansible (roles/edge-host). Read by open3e.service.
-# Full user:password pair as one variable so the unit can pass it as a
-# single -muser argument without exposing it in the unit file.
+# Managed by ansible (roles/edge-host). Read by open3e.service and
+# e3oncan.service.
+# Full user:password pair as one variable so the open3e unit can pass it
+# as a single -muser argument without exposing it in the unit file;
+# e3oncan takes user and password separately (-muser/-mpass).
 OPEN3E_MUSER={{ edge_open3e_mqtt_user }}:{{ edge_open3e_mqtt_password }}
+OPEN3E_MQTT_PASSWORD={{ edge_open3e_mqtt_password }}