chore(llama-server): grow the model cache to 120Gi for candidate evaluation

The embedding model was picked from a recommendation and never compared. MTEB's
German retrieval results put the deployed Qwen3-Embedding-0.6B well down the
field, so a dozen candidates are being measured against the real archive with
scripts/embed-eval-real.sh — and they will not fit in 40Gi alongside the two
deployed models.

Growing the shared cache rather than using a scratch volume is deliberate: on a
slow connection the download is the long pole, and a shared cache lets the large
candidates pull in the background while the small ones are already being
measured. It also means nothing is fetched twice across runs, and a candidate
that wins is already local when it is promoted.

120Gi against 309 GiB currently free in cephfs-data0. CephFS has
allowVolumeExpansion, so this grows online without disturbing the running pods.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>

kubernetes/RUNBOOK-baremetal-conversion.md

@@ -2,7 +2,12 @@
 
 Converts one MS-01 from "Proxmox host running a Talos VM" to "Talos on bare
 metal", and swaps its Ceph OSD onto a Samsung PM983 at the same time. Written
-after doing jupiter on 2026-08-25; saturn and neptune remain.
+after doing jupiter on 2026-08-25.
+
+All three nodes are now on bare metal — `talosctl get systeminformation`
+reports Minisforum MS-01 hardware with distinct chassis serials for k8s-1,
+k8s-2 and k8s-3, with no hypervisor in between. Kept as the procedure for a
+rebuild, not as outstanding work.
 
 Everything here that reads like an over-specific warning is something that
 actually happened. The conversion itself is straightforward — the failures were

kubernetes/apps/home-assistant/MIGRATION-recorder-postgres.md

@@ -111,9 +111,23 @@ statistics             max_id=13323904    max_start_ts=1787162400.0
 statistics_short_term  max_id=159205762   max_start_ts=1787166000.0
 ```
 
-## Phase 2c — cutover (REMAINING)
+## Phase 2c — cutover: DONE
 
-Do not start until phase 1 is verified.
+Verified 2026-09-02 against the live database:
+
+| table | rows | span |
+|---|---|---|
+| `statistics` | 11,092,586 | 2024-03-13 20:00 → current |
+| `statistics_short_term` | 1,883,709 | rolling ~7 days |
+| `statistics_meta` | 1,480 | |
+
+The 2024-03-13 origin is the proof that matters. It is unchanged from the
+pre-migration count in "What is at risk" above, so the history was copied
+across engines rather than started from zero — which is the failure this
+document exists to prevent. `states` carries current rows, so `db_url` points
+at Postgres.
+
+The procedure below is kept as the record of what was done.
 
 **Migrate statistics only.** Copying all 18M `states` rows is slow, needs a long
 HA outage, and buys a table that is discarded within 7 days anyway.

kubernetes/apps/home-assistant/deployment.yaml

@@ -56,10 +56,9 @@ spec:
         # Re-rendered on every pod start, so a CNPG password rotation takes
         # effect rather than silently leaving a stale URI behind.
         #
-        # INERT until the recorder is repointed: nothing reads this key until
-        # `db_url: !secret recorder_db_url` lands in configuration.yaml in the
-        # homeassistant repo. That ordering is required — HA refuses to start
-        # when a referenced secret is missing.
+        # Load-bearing: `db_url: !secret recorder_db_url` in the homeassistant
+        # repo's configuration.yaml reads this key, so HA does not start
+        # without it. Removing this init container takes the recorder down.
         - name: render-db-url
           image: busybox:1.36
           command:

kubernetes/apps/home-assistant/ha-pg-cluster.yaml

@@ -18,12 +18,12 @@
 # That is the point of the move — it attacks the multiplier rather than trimming
 # what gets recorded, which would only hide the problem.
 #
-# STAGING
-# Phase 1 (this manifest): the cluster comes up EMPTY and HA keeps using SQLite.
-# Nothing depends on it, so a failure here is inert. Verify Ready, WAL archiving
-# to Hetzner, and a successful base backup before going further.
-# Phase 2: migrate the statistics tables and repoint recorder.db_url.
-# See MIGRATION-recorder-postgres.md for the sequence and the rollback.
+# This is the live recorder database. HA writes here; the SQLite file is no
+# longer the system of record. The 2.4 years of long-term statistics were
+# copied across engines rather than regenerated — HA does not migrate data
+# between database engines, so an empty Postgres would have silently started
+# from zero and taken the energy dashboard's history with it.
+# MIGRATION-recorder-postgres.md holds the sequence that was followed.
 apiVersion: postgresql.cnpg.io/v1
 kind: Cluster
 metadata:

kubernetes/apps/home-assistant/kustomization.yaml

@@ -60,9 +60,8 @@ resources:
   - zigbee2mqtt-gate-service.yaml
   - zigbee2mqtt-ingress.yaml
   # Postgres backend for the recorder (MIGRATION-recorder-postgres.md).
-  # PHASE 1: this cluster comes up EMPTY and nothing consumes it — HA is still
-  # on SQLite. Deploying it is therefore inert; phase 2 migrates the statistics
-  # tables and repoints recorder.db_url in the homeassistant repo.
+  # Live: recorder.db_url in the homeassistant repo points here, and the
+  # long-term statistics carry their full history from 2024.
   - ha-pg-hetzner-creds-externalsecret.yaml
   - ha-pg-objectstore.yaml
   - ha-pg-cluster.yaml

kubernetes/apps/immich/cluster.yaml

@@ -10,15 +10,15 @@ metadata:
     # Kept permanently as a standing guard.
     kustomize.toolkit.fluxcd.io/prune: disabled
 spec:
-  # Single instance during pgvecto.rs → VectorChord migration window;
-  # pg_basebackup tar format chokes on the long pg_vectors/indexes/<uuid>
-  # paths, blocking replica join. Bump back to 2 once Immich's in-app
-  # vchord migration drops the vectors extension.
-  instances: 1
-  # See ak-pg cluster.yaml for rationale. Single-instance, so no failover, but
-  # the barman-plugin shutdown wedge (cloudnative-pg#9770) takes the whole DB
-  # down until SIGKILL — bounding terminationGracePeriod (stopDelay) matters
-  # even without a standby. smartShutdownTimeout keeps pod restarts quick.
+  # A replica is viable because nothing here writes pg_vectors any more. Both
+  # vector indexes run on vchordrq and the vectors extension is gone, so the
+  # long pg_vectors/indexes/<uuid> paths are absent — pg_basebackup's tar
+  # format cannot represent them, and that is what blocks a replica join.
+  instances: 2
+  # See ak-pg cluster.yaml for rationale. The barman-plugin shutdown wedge
+  # (cloudnative-pg#9770) holds an instance up until SIGKILL, so bounding
+  # terminationGracePeriod (stopDelay) is what keeps a failover from waiting
+  # on it. smartShutdownTimeout keeps pod restarts quick.
   smartShutdownTimeout: 10
   stopDelay: 60
   imageName: ghcr.io/corentingiraud/cnpg-pgvector-vectorchord:16-migration
@@ -36,8 +36,10 @@ spec:
       database: immich
       owner: immich
   postgresql:
+    # vchord only. The image also ships pgvecto.rs (vectors.so), but its
+    # extension is not installed and preloading it would recreate pg_vectors
+    # in PGDATA for nothing. pgvector needs no preloading.
     shared_preload_libraries:
-      - vectors.so
       - vchord.so
     parameters:
       shared_buffers: "512MB"

kubernetes/apps/llama-server/embed.yaml

@@ -44,12 +44,37 @@ spec:
             - Qwen/Qwen3-Embedding-0.6B-GGUF:Q8_0
             # Serves POST /v1/embeddings.
             - --embeddings
+            # A short, stable id for consumers. Without it the model is
+            # advertised as the whole --hf-repo string, which would end up
+            # verbatim in Paperless's config and break on the next model swap.
+            # One name only: llama-server keeps aliases in a sorted set and
+            # reports the first as the id, so a second name can steal it.
+            - --alias
+            - qwen3-embedding-0.6b
+            # Qwen3-Embedding is trained for last-token pooling. Left
+            # unspecified llama-server takes the GGUF's default, which is not
+            # visible from outside and would silently produce vectors the model
+            # was not trained to emit. Set before anything is indexed: changing
+            # pooling later invalidates every stored embedding.
+            - --pooling
+            - last
             - --n-gpu-layers
             - "99"
             - --threads
             - "2"
+            # Paperless chunks documents at 1024 tokens. The defaults are
+            # batch 2048 / ubatch 512, and with --embeddings llama-server
+            # clamps both down to 512 rather than run them mismatched — below
+            # the chunk size. Matching both to 1024 fits a whole chunk in one
+            # pass; 2048 is deliberately avoided, since that is where this
+            # Vulkan stack fails with ErrorDeviceLost.
+            - --batch-size
+            - "1024"
+            - --ubatch-size
+            - "1024"
+            # Room for a full chunk plus overhead rather than exactly one.
             - --ctx-size
-            - "2048"
+            - "4096"
             # No browser ever talks to this Service, so the WebUI is dead weight
             # and one more unauthenticated surface.
             - --no-webui

kubernetes/apps/llama-server/pvc.yaml

@@ -1,10 +1,20 @@
 ---
-# Holds the GGUF weights, downloaded once by the Deployment's initContainer.
-# Prune-disabled so retiring this Kustomization does not throw away several
-# GiB of model files that would have to be pulled from Hugging Face again.
+# Holds the GGUF weights, downloaded once by llama-server itself via --hf-repo.
+# Prune-disabled so retiring this Kustomization does not throw away tens of GiB
+# of model files that would have to be pulled from Hugging Face again.
 #
-# ReadWriteMany so a second replica or a one-off benchmark Job can mount the
-# same weights; the models are read-only at inference time.
+# ReadWriteMany so a second replica, a one-off benchmark Job, or a candidate
+# model being evaluated can mount the same weights; the models are read-only at
+# inference time.
+#
+# Sized well beyond the two deployed models. The cache is shared by every
+# candidate under evaluation (scripts/embed-eval-real.sh), and on a slow
+# connection the download is the long pole — a shared cache lets the large
+# candidates pull in the background while the small ones are already being
+# measured, and means a model is never fetched twice across runs.
+#
+# CephFS supports online expansion (allowVolumeExpansion on the storage class),
+# so growing this does not disturb the running pods.
 apiVersion: v1
 kind: PersistentVolumeClaim
 metadata:
@@ -18,4 +28,4 @@ spec:
   storageClassName: ceph-filesystem
   resources:
     requests:
-      storage: 40Gi
+      storage: 120Gi

kubernetes/apps/paperless/MIGRATION-data-to-block.md

@@ -1,97 +0,0 @@
-# paperless-data: CephFS → RBD
-
-## Why
-
-`paperless-data` is `ReadWriteMany` on `ceph-filesystem`, but **only the paperless
-Deployment mounts it**. Verified 2026-08-20:
-
-```
-$ pods mounting paperless-data
-paperless-68cb8b8744-7hjb8      <- one, and only one
-
-paperless-data     ReadWriteMany  ceph-filesystem
-paperless-media    ReadWriteMany  ceph-filesystem   <- genuinely shared (ftp-scanner)
-paperless-consume  ReadWriteMany  ceph-filesystem   <- genuinely shared (ftp-scanner)
-```
-
-Its contents are single-writer state — the 50 MB Whoosh index,
-`classification_model.pickle`, `celerybeat-schedule.db`, `log/`,
-`migration_lock`, `protonmail.pem`. 75 files. Nothing else reads or writes them.
-
-It is on CephFS by default, not by requirement.
-
-## What it costs
-
-Every access goes through the MDS. Measured with **zero CI pipelines running**:
-
-```
-paperless-data client   request_load_avg 22   (all other sessions 0-1)
-MDS over 180s           4,052 client requests  = 22.5/s
-                        2,718 journal events   = 15/s
-                            2 dir commits      <- almost none: not file writes
-```
-
-So it is cap/inode churn from repeated access, not data being written. That is
-most of the constant **7-8 GB/day** written to `cephfs-metadata`, and since that
-pool is `size: 3`, roughly **21-24 GB/day** reaches the drives.
-
-`cephfs-metadata` deliberately stays at size 3. Losing it destroys the entire
-filesystem rather than the objects on one OSD, and the 275 GiB in `cephfs-data0`
-depends on it. Cutting the writes at source is correct; cutting the replication
-is not.
-
-## Sequence
-
-Staged deliberately: the PVC lands first and empty, so merging it changes
-nothing. The copy and the repoint are separate.
-
-### Phase 1 — provision (this PR)
-
-`paperless-data-block` (RWO, `ceph-block`, 10Gi) is created and mounted by
-nothing. Inert.
-
-Verify: `kubectl -n paperless get pvc paperless-data-block` → Bound.
-
-### Phase 2 — copy
-
-The Whoosh index must come across intact. Paperless *can* rebuild it
-(`document_index reindex`), but that reprocesses every document, so copying is
-both faster and less disruptive.
-
-1. Scale paperless to 0. The source must be quiescent — `celerybeat-schedule.db`
-   and the Whoosh index are both live-written, and copying them under an active
-   writer gives a torn read.
-2. Run a one-off pod that mounts BOTH PVCs and copies:
-   ```
-   cp -a /src/. /dst/
-   ```
-   The RWO target pins the pod to one node; the RWX source will follow.
-3. Verify file count and index size match:
-   ```
-   find /src -type f | wc -l   ==   find /dst -type f | wc -l
-   du -sh /src/index           ==   du -sh /dst/index
-   ```
-
-### Phase 3 — repoint
-
-Change the Deployment's `data` volume to `claimName: paperless-data-block`,
-merge, let it roll.
-
-Verify afterwards:
-- paperless starts, search returns results (proves the Whoosh index survived)
-- `ceph tell mds.cephfs-b session ls` no longer shows a busy `paperless-data`
-  client
-- `rate(ceph_pool_wr_bytes{pool_id="3"})` drops from its 7-8 GB/day baseline
-
-**Do not delete `paperless-data` until search has been confirmed working.** It is
-the rollback, and it is `prune: disabled` so Flux will not remove it.
-
-## Expected effect
-
-~7-8 GB/day off `cephfs-metadata`, so ~21-24 GB/day off the drives once
-replication is counted. Against ~432 GB/day cluster-wide that is roughly 5% —
-worth doing, but it is a correctness fix (a single-writer volume does not belong
-on a shared filesystem) more than a large win.
-
-It also removes 22 req/sec of MDS load, which benefits the workloads that
-genuinely need CephFS — Woodpecker CI workspaces share the same MDS.

kubernetes/apps/paperless/network-policy.yaml

@@ -57,6 +57,20 @@ spec:
               protocol: UDP
             - port: "53"
               protocol: TCP
+    # The cluster's own LLM, for AI suggestions and RAG embeddings. Scoped to
+    # the two pods and the one port rather than the ai namespace as a whole, so
+    # this grant cannot widen if something else is ever placed there.
+    - toEndpoints:
+        - matchLabels:
+            "k8s:io.kubernetes.pod.namespace": ai
+            app.kubernetes.io/name: llama-server
+        - matchLabels:
+            "k8s:io.kubernetes.pod.namespace": ai
+            app.kubernetes.io/name: llama-embed
+      toPorts:
+        - ports:
+            - port: "8080"
+              protocol: TCP
     # External HTTPS only — Tika model downloads, runtime image
     # fetches, etc. RFC1918 + ULA are excluded from `world` via the
     # CIDR-deny pattern. `world` covers public IPs / DNS-resolvable

kubernetes/apps/paperless/paperless.yaml

@@ -31,12 +31,14 @@ data:
   PAPERLESS_CONSUMER_DELETE_DUPLICATES: "true"
   PAPERLESS_CONSUMER_ENABLE_BARCODES: "true"
   PAPERLESS_CONSUMER_ENABLE_ASN_BARCODE: "true"
-  PAPERLESS_CONSUMER_BARCODE_SCANNER: "ZXING"
+  # No CONSUMER_BARCODE_SCANNER: zxing-cpp is the only backend, so the
+  # setting no longer exists. pyzbar and libzbar are gone from the image.
+  #
   # CephFS does not propagate inotify across nodes — files written
   # via the RWX consume PVC from a pod on a different node than
   # paperless never fire IN_CREATE in paperless's kernel. Polling
   # is the reliable backstop. See wiki: cephfs-inotify-no-cross-node-propagation.
-  PAPERLESS_CONSUMER_POLLING: "10"
+  PAPERLESS_CONSUMER_POLLING_INTERVAL: "10"
   PAPERLESS_REDIS: "redis://redis:6379"
   PAPERLESS_DBENGINE: "postgresql"
   PAPERLESS_DBHOST: "pprl-pg-rw"
@@ -44,6 +46,44 @@ data:
   PAPERLESS_TIKA_ENABLED: "1"
   PAPERLESS_TIKA_ENDPOINT: "http://tika:9998"
   PAPERLESS_TIKA_GOTENBERG_ENDPOINT: "http://gotenberg:3000"
+  # AI suggestions against the cluster's own LLM (kubernetes/apps/llama-server).
+  # Nothing leaves the cluster: both endpoints are ClusterIP Services, so
+  # document text is never sent to a third party and there is no API key to
+  # rotate — llama-server has no authentication, and the ai namespace's network
+  # policy is what restricts who may reach it.
+  #
+  # CAVEAT, and it is a real one: paperless reads these from an
+  # ApplicationConfiguration row in the database and falls back to the
+  # environment only when that row is empty. A value set in the admin UI
+  # therefore overrides this ConfigMap silently. Configure AI in ONE place —
+  # here — and leave those fields untouched in the UI.
+  PAPERLESS_AI_ENABLED: "true"
+  PAPERLESS_AI_LLM_BACKEND: "openai-like"
+  PAPERLESS_AI_LLM_ENDPOINT: "http://llama-server.ai.svc.cluster.local:8080/v1"
+  # Must match --alias in kubernetes/apps/llama-server/deployment.yaml. The
+  # server ignores the field on the wire, but paperless sends it and the value
+  # is what appears in its logs.
+  PAPERLESS_AI_LLM_MODEL: "qwen3.6-35b-a3b"
+  # ClusterIP addresses are private, and paperless blocks non-public endpoints
+  # unless this is set. Default is already true; explicit because the whole
+  # integration silently stops working if it ever flips.
+  PAPERLESS_AI_LLM_ALLOW_INTERNAL_ENDPOINTS: "true"
+  # Under llama-server's own 16384, leaving room for the response.
+  PAPERLESS_AI_LLM_CONTEXT_SIZE: "12288"
+  # The 120s default is too tight at ~11 tok/s: a classification is roughly
+  # 2-4k prompt tokens plus a second round trip for localisation.
+  PAPERLESS_AI_LLM_REQUEST_TIMEOUT: "300"
+  # Matched against Django's settings.LANGUAGES, so the region is required —
+  # "de" alone does not resolve. Without it the model returns German tags but
+  # English document types, which was reproducible against this endpoint.
+  PAPERLESS_AI_LLM_OUTPUT_LANGUAGE: "de-de"
+  # RAG embeddings from llama-embed. Its Qwen3-Embedding covers 100+ languages,
+  # where paperless's default all-MiniLM-L6-v2 is documented as suited to
+  # primarily English archives — the better fit for a German corpus.
+  PAPERLESS_AI_LLM_EMBEDDING_BACKEND: "openai-like"
+  PAPERLESS_AI_LLM_EMBEDDING_ENDPOINT: "http://llama-embed.ai.svc.cluster.local:8080/v1"
+  PAPERLESS_AI_LLM_EMBEDDING_MODEL: "qwen3-embedding-0.6b"
+  PAPERLESS_AI_LLM_EMBEDDING_CHUNK_SIZE: "1024"
 ---
 apiVersion: apps/v1
 kind: Deployment
@@ -56,6 +96,13 @@ metadata:
     # Reloader restarts paperless when paperless-secrets changes (e.g. after a
     # secret-key rotation). See kubernetes/infrastructure/openbao/rotation/paperless.yaml.
     secret.reloader.stakater.com/reload: paperless-secrets
+    # And when paperless-config changes. The ConfigMap is consumed with
+    # envFrom, and Kubernetes does not restart a pod when a ConfigMap it reads
+    # that way is updated — the running container keeps the environment it
+    # started with. Without this, a settings change applies cleanly in git and
+    # in the cluster while the application never sees it, which is how the AI
+    # settings landed with no effect at all.
+    configmap.reloader.stakater.com/reload: paperless-config
 spec:
   replicas: 1
   strategy:
@@ -120,7 +167,7 @@ spec:
               drop: ["ALL"]
       containers:
         - name: paperless
-          image: ghcr.io/paperless-ngx/paperless-ngx:2.20.15 # {"$imagepolicy": "flux-system:paperless-ngx"}
+          image: ghcr.io/paperless-ngx/paperless-ngx:3.1.2 # {"$imagepolicy": "flux-system:paperless-ngx"}
           ports:
             - name: http
               containerPort: 8000
@@ -172,6 +219,25 @@ spec:
           # Safe against ALLOWED_HOSTS: the kubelet sends the pod IP as Host,
           # and PAPERLESS_ALLOWED_HOSTS is "*". Narrowing that value later
           # means giving these probes an explicit Host header.
+
+          # The container does not serve until its init sequence finishes:
+          # s6 makes svc-webserver depend on init-migrations and
+          # init-search-index. On the first 3.x start those are the SHA256
+          # checksum backfill, which opens and reads every original and every
+          # archive file, and a full Tantivy index build, since the Whoosh
+          # index cannot be converted. Both scale with the corpus.
+          #
+          # startupProbe holds liveness and readiness off until the webserver
+          # answers, giving that boot 30 * 20s = 10 minutes. Without it the
+          # 120s liveness delay plus three 30s periods kills the pod 210s in,
+          # part-way through a migration, and the next boot starts over.
+          startupProbe:
+            httpGet:
+              path: /accounts/login/
+              port: http
+            periodSeconds: 20
+            timeoutSeconds: 5
+            failureThreshold: 30
           livenessProbe:
             httpGet:
               path: /accounts/login/
@@ -220,22 +286,16 @@ spec:
             seccompProfile:
               type: RuntimeDefault
       volumes:
-        # paperless-data-block (RWO, ceph-block), NOT paperless-data
-        # (RWX, ceph-filesystem). Only this Deployment ever mounted the volume,
-        # and its contents are single-writer state — the Whoosh index,
-        # classification model, celerybeat schedule, logs. Being on CephFS meant
-        # every access went through the MDS: 22 requests/sec sustained with zero
-        # CI running, ~15 journal events/sec against 2 directory commits per
-        # 180s, i.e. cap/inode churn rather than file writes. That was most of
-        # the constant 7-8 GB/day on cephfs-metadata, and that pool is size 3.
+        # `data` is RWO on ceph-block, not RWX on ceph-filesystem. Only this
+        # Deployment mounts it and its contents are single-writer state — the
+        # search index, classification model, celerybeat schedule, logs. On
+        # CephFS every access went through the MDS: 22 requests/sec sustained
+        # with zero CI running, ~15 journal events/sec against 2 directory
+        # commits per 180s, i.e. cap/inode churn rather than file writes. That
+        # was most of the constant 7-8 GB/day on cephfs-metadata, a size 3 pool.
         #
         # `consume` and `media` below STAY on CephFS: the ftp-scanner writes to
         # those from another node, so they genuinely need RWX.
-        #
-        # paperless-data is retained (prune: disabled) as the rollback. Do not
-        # delete it until search has been confirmed working — that is what
-        # proves the Whoosh index survived the copy, not merely that paperless
-        # starts. Migration record: MIGRATION-data-to-block.md.
         - name: data
           persistentVolumeClaim:
             claimName: paperless-data-block

kubernetes/apps/paperless/pvcs.yaml

@@ -3,33 +3,18 @@
 # (e.g. when the seed initContainer or the Garage migration creds are
 # removed once we're done with the migration phase). Velero's
 # bootstrap-restore then owns their contents.
-apiVersion: v1
-kind: PersistentVolumeClaim
-metadata:
-  name: paperless-data
-  namespace: paperless
-  annotations:
-    kustomize.toolkit.fluxcd.io/prune: disabled
-spec:
-  accessModes:
-    - ReadWriteMany
-  storageClassName: ceph-filesystem
-  resources:
-    requests:
-      storage: 10Gi
----
-# Replacement for paperless-data, on RBD instead of CephFS.
+
+# paperless's single-writer state, on RBD rather than CephFS.
 #
-# WHY: paperless-data is declared ReadWriteMany on ceph-filesystem, but only ONE
-# pod ever mounts it — the paperless Deployment itself. Its contents are all
-# single-writer state: the 50 MB Whoosh index, classification_model.pickle,
-# celerybeat-schedule.db, logs, migration_lock. Nothing shares it. Only `consume`
-# and `media` genuinely need RWX, because the FTP scanner writes to those from a
-# different node.
+# WHY RWO: only ONE pod mounts it — the paperless Deployment itself. Its
+# contents are all single-writer state: the Tantivy search index,
+# classification_model.pickle, celerybeat-schedule.db, logs, migration_lock.
+# Nothing shares it. Only `consume` and `media` genuinely need RWX, because the
+# FTP scanner writes to those from a different node.
 #
-# COST OF LEAVING IT: every access goes through the MDS. Measured 2026-08-20 with
-# zero CI running, this volume's client was doing 22 MDS requests/sec sustained,
-# and the MDS logged ~15 journal events/sec against only 2 directory commits per
+# WHY NOT CEPHFS: every access goes through the MDS. With zero CI running, this
+# volume's client sustained 22 MDS requests/sec, and the MDS logged ~15 journal
+# events/sec against only 2 directory commits per
 # 180s — i.e. cap and inode churn from repeated access, not file writes. That is
 # most of the constant 7-8 GB/day written to cephfs-metadata, which is a size 3
 # pool, so ~21-24 GB/day actually hits the drives.
@@ -38,10 +23,6 @@ spec:
 # the metadata pool destroys the whole filesystem, not just the objects on one
 # OSD, so the 275 GiB in cephfs-data0 rides on it. Reducing the writes at source
 # is the right fix; reducing the replication is not.
-#
-# MIGRATION: this PVC is created EMPTY and nothing mounts it yet. The data copy
-# and the deployment repoint are a separate, staged step — see
-# MIGRATION-data-to-block.md. Merging this alone is inert.
 apiVersion: v1
 kind: PersistentVolumeClaim
 metadata:

kubernetes/apps/whisper/deployment.yaml

@@ -18,7 +18,7 @@ spec:
     spec:
       containers:
         - name: whisper
-          image: rhasspy/wyoming-whisper:3.6.0 # {"$imagepolicy": "flux-system:wyoming-whisper"}
+          image: rhasspy/wyoming-whisper:3.7.0 # {"$imagepolicy": "flux-system:wyoming-whisper"}
           args:
             - --model=base-int8
             - --language=de

kubernetes/infrastructure/image-automation/paperless-ngx.yaml

@@ -7,7 +7,7 @@ spec:
   image: ghcr.io/paperless-ngx/paperless-ngx
   interval: 1h
 ---
-# Allow only patch + minor bumps within the 2.x line. A 3.0 release
+# Allow only patch + minor bumps within the 3.x line. A 4.0 release
 # requires manual policy widening — major upgrades typically need a
 # migration plan and shouldn't land via auto-merge.
 apiVersion: image.toolkit.fluxcd.io/v1
@@ -20,4 +20,4 @@ spec:
     name: paperless-ngx
   policy:
     semver:
-      range: "2.x"
+      range: "3.x"

kubernetes/infrastructure/network-policies/ai-ns.yaml

@@ -24,6 +24,16 @@ spec:
         - ports:
             - port: "8080"
               protocol: TCP
+    # Paperless calls both models for AI suggestions and RAG embeddings. The
+    # matching egress grant on its side is scoped to these two pods on :8080.
+    - fromEndpoints:
+        - matchLabels:
+            "k8s:io.kubernetes.pod.namespace": paperless
+            app.kubernetes.io/name: paperless
+      toPorts:
+        - ports:
+            - port: "8080"
+              protocol: TCP
     - fromEndpoints:
         - matchLabels:
             "k8s:io.kubernetes.pod.namespace": monitoring