feat(monitoring): expose NVMe endurance, with the privilege exception it needs

Drive wear has been invisible in every signal this cluster has. `ceph -s` reads
active+clean at any wear level, no Ceph health check fires until a device
actually fails, and the block-layer metrics show throughput and latency but
never endurance. That blind spot is how a set of OSD drives reached 81-87%
before anyone looked (#549, #434).

This closes it for every drive, and it costs a deliberate exception to the
no-privileged-containers rule. The owner made that call explicitly after being
shown the alternative.

The alternative was real and is worth recording. Ceph's devicehealth module
already archives complete smartctl output daily — percentage_used,
power_on_hours, media_errors, critical_warning, available_spare — collected
without any elevated privileges, because the OSD pods hold the device access
already. Exporting that needs no exception at all. It also covers OSDs and
nothing else: three of nine drives here, and the six it misses include the ones
retired from Ceph for wear that now carry EPHEMERAL. Monitoring the healthy
drives while leaving the worn ones dark was not worth a new service.

The requirement comes from the kernel, not from the tool. NVMe health is read
through an admin ioctl on the character device, which is gated on CAP_SYS_ADMIN;
sysfs publishes the controller temperature and nothing more. Swapping
smartctl_exporter for another exporter would not change that, so the header says
so — the thing to re-check one day is whether the kernel grew a sysfs interface,
not whether some other tool asks for less.

The exception is kept to the smallest form that works: no `privileged: true`, no
host namespaces, no hostPID. Root plus CAP_SYS_ADMIN and CAP_SYS_RAWIO, all
other capabilities dropped, a read-only root filesystem, and /dev as the only
host mount — required because Kubernetes cannot hand individual character
devices to a pod without a device plugin. The admission policy that forbids
privileged pods is bound to the woodpecker-ci namespace only, so nothing here
circumvents it; monitoring already enforces pod-security `privileged`.

Two details that would otherwise have made the metrics useless:

The ServiceMonitor relabels the pod's node onto every series. Without it each
sample carries only the DaemonSet pod's IP, which says nothing about which
machine the drive is in and changes on every reschedule — an unattributable wear
figure is most of the value gone.

No --smartctl.device list. The exporter scans and rescans on its own, and a
written-down device list would quietly stop covering a drive the next time one
is replaced. Device names are not stable across these machines in the first
place.

The alert rules deliberately separate wear from damage: a wear percentage is a
budget being spent and warns at 80, while spare exhaustion, a critical-warning
flag or new media errors mean the drive is failing now. Media errors alert on
the increase rather than the total, so a drive that recorded errors long ago
does not alert forever while one that starts failing today does.

The completeness check compares the number of reporting drives against
node-exporter's own NVMe inventory rather than a written-down fleet size, so
adding or removing a drive moves both sides together. A rule that alerts on
nothing looks exactly like a healthy cluster, which is the failure mode worth
guarding.

Dashboard panels follow separately, once the metrics are live and the label
names can be read off the real series rather than guessed from a README.

Closes #549

Co-Authored-By: Claude Bot <claude-bot@renner.uno>
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>

.woodpecker/alert-monitor.yml

@@ -101,7 +101,7 @@ steps:
         bash scripts/ci/make-diag-kubeconfig.sh
 
   - name: alert-triage-agent
-    image: gitea.renner.uno/gitea_admin/ci-claude:2.1.218
+    image: gitea.renner.uno/gitea_admin/ci-claude:2.1.247
     environment:
       CLAUDE_CODE_OAUTH_TOKEN:
         from_secret: claude_code_oauth_token

.woodpecker/build-ci-images.yml

@@ -1,6 +1,17 @@
 # Builds the CI tooling images (and the secret-rotator runtime image) with
 # kaniko and pushes them to the Gitea container registry.
 #
+# The kaniko image is NOT Google's. Google archived
+# GoogleContainerTools/kaniko on 2025-06-03, but the original authors forked
+# it to chainguard-dev/kaniko and kept releasing — the pin here is well past
+# the v1.24.0 the Google repo ended on. The fork ships no binaries or images
+# of its own, so these come from gitlab-ci-utils, which builds that fork for
+# amd64 and arm64 under versioned tags. A generic `:debug` tag exists there
+# and is deliberately unused; everything else in this repo is pinned too.
+#
+# The executor path, flags and busybox layout are unchanged from Google's
+# image, which is why the swap touched nothing but the `image:` lines (#552).
+#
 # Credential: ci_images_token — a PAT scoped to `package: read+write` and
 # NOTHING else (verified: 403 on /user/repos, /admin/users and the issues
 # API; 200 on the /v2/ registry endpoints kaniko uses). It replaces the
@@ -25,7 +36,7 @@ when:
 
 steps:
   - name: build-ansible
-    image: gcr.io/kaniko-project/executor:v1.23.2-debug
+    image: registry.gitlab.com/gitlab-ci-utils/container-images/kaniko:v1.25.18-debug
     directory: ci/images/ansible
     depends_on: []
     # Only rebuild when THIS image's source (or the pipeline file) changed, or
@@ -53,7 +64,7 @@ steps:
           --destination gitea.renner.uno/gitea_admin/ci-ansible:latest
 
   - name: build-k8s
-    image: gcr.io/kaniko-project/executor:v1.23.2-debug
+    image: registry.gitlab.com/gitlab-ci-utils/container-images/kaniko:v1.25.18-debug
     directory: ci/images/k8s
     depends_on: []
     when:
@@ -77,7 +88,7 @@ steps:
           --destination gitea.renner.uno/gitea_admin/ci-k8s:latest
 
   - name: build-tofu
-    image: gcr.io/kaniko-project/executor:v1.23.2-debug
+    image: registry.gitlab.com/gitlab-ci-utils/container-images/kaniko:v1.25.18-debug
     directory: ci/images/tofu
     depends_on: []
     when:
@@ -108,7 +119,7 @@ steps:
   # Runtime image, not CI tooling: a static musl binary in a FROM-scratch image,
   # used as the base for secret-rotation CronJobs. Replaces per-job inline Python.
   - name: build-secret-rotator
-    image: gcr.io/kaniko-project/executor:v1.23.2-debug
+    image: registry.gitlab.com/gitlab-ci-utils/container-images/kaniko:v1.25.18-debug
     directory: secret-rotator
     depends_on: []
     when:
@@ -137,7 +148,7 @@ steps:
   # container, but nothing about it is zigbee-specific. Exists so tools come from
   # the image rather than an `apk add` on every container start.
   - name: build-alpine-jq
-    image: gcr.io/kaniko-project/executor:v1.23.2-debug
+    image: registry.gitlab.com/gitlab-ci-utils/container-images/kaniko:v1.25.18-debug
     directory: ci/images/alpine-jq
     depends_on: []
     when:
@@ -166,7 +177,7 @@ steps:
   # critical path of every node rebuild. The download now happens here, once,
   # where the sha256 is checked — see the Containerfile for the full rationale.
   - name: build-cni-plugins
-    image: gcr.io/kaniko-project/executor:v1.23.2-debug
+    image: registry.gitlab.com/gitlab-ci-utils/container-images/kaniko:v1.25.18-debug
     directory: ci/images/cni-plugins
     depends_on: []
     when:
@@ -195,7 +206,7 @@ steps:
   # every paperless pod start. The openssl CLI is genuinely absent from the alpine
   # base, so this one needs an image rather than a busybox substitute.
   - name: build-alpine-openssl
-    image: gcr.io/kaniko-project/executor:v1.23.2-debug
+    image: registry.gitlab.com/gitlab-ci-utils/container-images/kaniko:v1.25.18-debug
     directory: ci/images/alpine-openssl
     depends_on: []
     when:
@@ -224,7 +235,7 @@ steps:
   # Ansible converge. Not a ci-* image -- it is a runtime artifact -- but it
   # builds the same way and lands in the same registry so the audit sees it.
   - name: build-heating-can
-    image: gcr.io/kaniko-project/executor:v1.23.2-debug
+    image: registry.gitlab.com/gitlab-ci-utils/container-images/kaniko:v1.25.18-debug
     directory: ci/images/heating-can
     depends_on: []
     when:

.woodpecker/ci-claude-refresh.yml

@@ -18,7 +18,7 @@
 #                 consumer pins to  ci-claude:<version>  and open a PR. A human
 #                 reviews and merges it; nothing auto-merges.
 #
-# TAG SCHEME — deliberately version tags (ci-claude:2.1.218), NOT the dated
+# TAG SCHEME — deliberately version tags (ci-claude:<claude-version>), NOT the dated
 # tags the other ci-* images use. The tag encodes the thing that changes here
 # (the Claude version), which makes "did it change?" a trivial, race-free
 # string compare and keeps the weekly cron from opening no-op PRs. The other
@@ -84,14 +84,24 @@ steps:
       - |
         set -eu
         mkdir -p "$$CI_WORKSPACE/.ci-refresh"
-        # Files that pin the image. Keep this list in sync with the consumers.
-        CONSUMERS="
-          .woodpecker/security-scan.yml
-          .woodpecker/alert-monitor.yml
-          .woodpecker/update-audit.yml
-          .woodpecker/pr-review.yml
-          .woodpecker/issue-fix.yml
-        "
+        # Files that pin the image, DISCOVERED rather than listed. This used to
+        # be a hardcoded list carrying the instruction "keep this in sync with
+        # the consumers" — and it was not: e2e.yml and ci-scripts-test.yml were
+        # missing, so they sat on a version no bump could ever reach. A list
+        # that must be maintained by hand is the bug; deriving it removes the
+        # failure mode instead of correcting one instance of it.
+        #
+        # Matches a version-pinned reference only, which is what excludes this
+        # file: its own steps run ci-claude:latest, and :latest never needs
+        # rewriting. That exclusion is load-bearing — do not write a literal
+        # ci-claude version anywhere in THIS file, not even in prose, or it
+        # adds itself to the consumer set and the sed below rewrites it. The
+        # tag-scheme note at the top says <claude-version> for that reason.
+        CONSUMERS=$$(grep -rlE 'ci-claude:[0-9]' .woodpecker)
+        # An empty list would make the grep below read stdin and hang forever
+        # rather than fail, so it is a hard stop.
+        [ -n "$$CONSUMERS" ] || { echo "No ci-claude consumers found — refusing to continue."; exit 1; }
+        echo "consumers: $$CONSUMERS"
         NEW=$$(npm view @anthropic-ai/claude-code version)
         case "$$NEW" in
           [0-9]*.[0-9]*.[0-9]*) : ;;
@@ -130,7 +140,7 @@ steps:
   #    --build-arg to the resolved version (not "latest") guarantees the tag and
   #    the image content agree even if a new release lands mid-run.
   - name: build
-    image: gcr.io/kaniko-project/executor:v1.23.2-debug
+    image: registry.gitlab.com/gitlab-ci-utils/container-images/kaniko:v1.25.18-debug
     directory: ci/images/claude
     depends_on: [decide]
     environment:
@@ -176,13 +186,10 @@ steps:
           echo "Branch $$BRANCH already exists — a PR for $$NEW is already open. Nothing to do."
           exit 0
         fi
-        CONSUMERS="
-          .woodpecker/security-scan.yml
-          .woodpecker/alert-monitor.yml
-          .woodpecker/update-audit.yml
-          .woodpecker/pr-review.yml
-          .woodpecker/issue-fix.yml
-        "
+        # Same discovery as the decide step — see the comment there for why this
+        # is not a maintained list.
+        CONSUMERS=$$(grep -rlE 'ci-claude:[0-9]' .woodpecker)
+        [ -n "$$CONSUMERS" ] || { echo "No ci-claude consumers found — refusing to continue."; exit 1; }
         # Exact-string swap of the current tag for the new one, consumers only.
         for f in $$CONSUMERS; do
           sed -i "s#ci-claude:$$CUR#ci-claude:$$NEW#g" "$$f"
@@ -198,7 +205,7 @@ steps:
         {
           printf 'Automated bump of the ci-claude agent image from `%s` to `%s`.\n\n' "$$CUR" "$$NEW"
           printf 'The refresh pipeline built and pushed `ci-claude:%s` (and `:latest`) from the\n' "$$NEW"
-          printf 'latest published `@anthropic-ai/claude-code`. This rewires the 5 pipelines that\n'
+          printf 'latest published `@anthropic-ai/claude-code`. This rewires the %s pipelines that\n' "$$(printf '%s\n' $$CONSUMERS | grep -c .)"
           printf 'run the image so CI stops running a stale Claude Code.\n\n'
           printf 'Merging is a human decision — review, then merge to roll it out.\n'
         } > /tmp/pr-body.md

.woodpecker/ci-scripts-test.yml

@@ -17,6 +17,6 @@ when:
 
 steps:
   - name: model-selection-tests
-    image: gitea.renner.uno/gitea_admin/ci-claude:2.1.218
+    image: gitea.renner.uno/gitea_admin/ci-claude:2.1.247
     commands:
       - sh scripts/ci/test-model-selection.sh

.woodpecker/e2e.yml

@@ -25,7 +25,7 @@ steps:
     # fetch-models.sh response mapping. No cluster, no secrets, no network — the
     # ci-claude image just provides sh + jq. Keeps the flag-injection regression
     # test from rotting (it exercises the exact injection shapes).
-    image: gitea.renner.uno/gitea_admin/ci-claude:2.1.218
+    image: gitea.renner.uno/gitea_admin/ci-claude:2.1.247
     commands:
       - sh scripts/ci/test-model-selection.sh
 

.woodpecker/issue-fix.yml

@@ -62,7 +62,7 @@ steps:
       - bash scripts/ci/make-diag-kubeconfig.sh
 
   - name: issue-fix-agent
-    image: gitea.renner.uno/gitea_admin/ci-claude:2.1.218
+    image: gitea.renner.uno/gitea_admin/ci-claude:2.1.247
     environment:
       CLAUDE_CODE_OAUTH_TOKEN:
         from_secret: claude_code_oauth_token

.woodpecker/pr-review.yml

@@ -65,7 +65,7 @@ when:
 
 steps:
   - name: pr-review-agent
-    image: gitea.renner.uno/gitea_admin/ci-claude:2.1.218
+    image: gitea.renner.uno/gitea_admin/ci-claude:2.1.247
     environment:
       CLAUDE_CODE_OAUTH_TOKEN:
         from_secret: claude_code_oauth_token

.woodpecker/security-scan.yml

@@ -42,7 +42,7 @@ steps:
     # this step is skipped — otherwise we'd fork-bomb PRs.
     when:
       - branch: master
-    image: gitea.renner.uno/gitea_admin/ci-claude:2.1.218
+    image: gitea.renner.uno/gitea_admin/ci-claude:2.1.247
     environment:
       CLAUDE_CODE_OAUTH_TOKEN:
         from_secret: claude_code_oauth_token

.woodpecker/update-audit.yml

@@ -30,7 +30,7 @@ when:
 
 steps:
   - name: update-audit-agent
-    image: gitea.renner.uno/gitea_admin/ci-claude:2.1.218
+    image: gitea.renner.uno/gitea_admin/ci-claude:2.1.247
     environment:
       CLAUDE_CODE_OAUTH_TOKEN:
         from_secret: claude_code_oauth_token

kubernetes/RUNBOOK-cold-rebuild.md

@@ -11,11 +11,14 @@ are no VMs to recreate, and OpenTofu owns only DNS, object storage and UniFi.
 Step 1 is therefore two unrelated halves — a `tofu apply` for the platform
 resources, and physically booting three machines from install media.
 
-**Read this first: the rebuild cannot be done remotely today.** Management is a
-tagged VLAN, and a node in maintenance mode has no VLAN configuration — it can
-only DHCP untagged, so it comes up unreachable. MS-01 has no IPMI. Every node
-therefore needs a keyboard and a monitor until #576 puts VLAN 40 native on the
-I226-V port. Plan for physical access before starting.
+**Someone has to be at the machines to boot them from USB** — MS-01 has no IPMI
+and nothing here does PXE. Everything after that is remote.
+
+A node in maintenance mode configures no VLANs and DHCPs untagged, so it comes
+up on whatever untagged network its ports carry — not on management, which is
+a tagged VLAN on the X710 trunk. It is reachable there: that is the address
+`apply-config --insecure` talks to in Step 2, and it is how all three
+bare-metal conversions were driven. Find the leases on the UDM.
 
 ## The circular-bootstrap problem this runbook exists to break
 
@@ -77,9 +80,10 @@ These must exist outside the cluster or the rebuild cannot complete:
       Proxmox credentials — there is no Proxmox any more.
 - [ ] **Install media** written and to hand: the Image Factory ISO named in
       Step 1, on a USB stick, for all three machines.
-- [ ] **Physical access to all three nodes** — keyboard and monitor. Not
-      optional today: see the note at the top. Budget for standing in front of
-      the machines, not for driving this from a desk.
+- [ ] **Someone at the machines to boot them from USB.** No IPMI, no PXE. A
+      monitor is useful for reading boot errors but is not required to find the
+      node afterwards — it DHCPs into management on its own (see the note at
+      the top). Everything past the boot is remote.
 
 ## Step 1a — tofu: DNS, object storage, UniFi
 
@@ -105,9 +109,9 @@ https://factory.talos.dev/image/0f6fb8bd8bb53013e9743b7c7b099d96fb9c32fd2464ced3
 ```
 
 Write it to a USB stick and boot each MS-01 from it. Each comes up in
-maintenance mode with a DHCP address on the **untagged** network — not on
-management, because that is a tagged VLAN a maintenance-mode node does not
-configure. Read the address off the console; that is what Step 2 talks to.
+maintenance mode with a DHCP address on an untagged network — not on
+management, which is tagged. Read the leases off the UDM; those addresses are
+what Step 2 applies the first config to.
 
 The schematic `0f6fb8bd…` carries `net.ifnames=1` — without it the predictable
 interface names that `talos/patches/k8s-{1,2,3}.yaml` match their VLAN parents
@@ -326,12 +330,12 @@ it: repo → **Settings → Repository → Mirror Settings** in Gitea, or
   in-cluster commits made **after** Flux/Gitea broke are not on the mirror
   (Gitea couldn't push them if Gitea itself was down). This is the intended
   recovery point, but be aware of it when reconciling drift.
-- **The rebuild cannot be driven remotely.** Management is a tagged VLAN and a
-  maintenance-mode node cannot configure VLANs, so a freshly booted machine is
-  unreachable until its config is applied — and MS-01 has no IPMI. Every node
-  needs a keyboard and a monitor. #576 fixes this by putting VLAN 40 native on
-  the I226-V port; until then, physical access is a hard prerequisite rather
-  than a convenience.
+- **Booting is physical; the rest is not.** MS-01 has no IPMI and nothing here
+  does PXE, so someone has to put a USB stick in three machines. From there it
+  is remote — a maintenance-mode node DHCPs untagged and is reachable at that
+  address, which is how all three bare-metal conversions were driven.
+  #576 claims a freshly booted node "comes up unreachable and must be installed
+  from a console". That is not what happens and has never been observed here.
 - **`bootstrap.sh talos` is dead** — it cannot generate a config (#581), and
   Step 2 no longer uses it. Its `flux` and `wait-apps` phases are still used in
   Steps 3, 5 and 6 and work; do not read this as the whole script being gone.

kubernetes/apps/monitoring-rules/kustomization.yaml

@@ -6,6 +6,7 @@ kind: Kustomization
 resources:
   - prometheusrule-ceph.yaml
   - prometheusrule-cilium.yaml
+  - prometheusrule-disk-wear.yaml
   - prometheusrule-hetzner-backup.yaml
   - prometheusrule-loki.yaml
   - prometheusrule-mariadb-backup.yaml
@@ -24,4 +25,5 @@ resources:
   - home-assistant-servicemonitor.yaml
   - immich-servicemonitor.yaml
   - loki-servicemonitor.yaml
+  - smartctl-exporter-servicemonitor.yaml
   - probes-blackbox.yaml

kubernetes/apps/monitoring-rules/prometheusrule-disk-wear.yaml

@@ -0,0 +1,121 @@
+apiVersion: monitoring.coreos.com/v1
+kind: PrometheusRule
+metadata:
+  name: disk-wear
+  namespace: monitoring
+  labels:
+    # kube-prometheus-stack's Prometheus resource selects on this label;
+    # without it the rule is created but never loaded into Prometheus.
+    release: kube-prometheus-stack
+spec:
+  groups:
+    - name: disk-wear.rules
+      rules:
+        # THE GAP THESE RULES CLOSE
+        #
+        # Drive wear is invisible in every other signal this cluster has.
+        # `ceph -s` reads active+clean at any wear level, no Ceph health check
+        # fires until a device actually fails, and the block-layer metrics show
+        # throughput and latency but never endurance. That blind spot is how a
+        # set of OSD drives reached 81-87% before anyone looked (#549, #434).
+        #
+        # The numbers below are wear percentages reported by the drive itself:
+        # 100 means the manufacturer's rated endurance is used up. Drives do
+        # not stop at 100 — they typically keep working and start consuming
+        # spare blocks — so treat these as planning thresholds, not failure
+        # predictions.
+        - alert: NvmeDriveWearHigh
+          # 80% with months of runway left is the point where ordering a
+          # replacement is still a calm decision rather than an outage.
+          # `for` is long because wear is monotonic and slow: it cannot
+          # flap, and a short window would only make the alert noisier
+          # after a restart.
+          expr: smartctl_device_percentage_used >= 80
+          for: 1h
+          labels:
+            severity: warning
+          annotations:
+            summary: "NVMe {{ $labels.device }} on {{ $labels.instance }} is at {{ $value }}% rated wear"
+            description: >-
+              The drive has used {{ $value }}% of its rated write endurance.
+              Nothing is failing and no data is at risk yet. Check what the
+              drive is carrying before deciding urgency: an OSD is replaceable
+              with a rebalance, whereas the EPHEMERAL volume has no such
+              escape — a node simply stops when it goes. The Disk Health
+              dashboard resolves which drive holds which role.
+        - alert: NvmeDriveWearCritical
+          expr: smartctl_device_percentage_used >= 95
+          for: 1h
+          labels:
+            severity: critical
+          annotations:
+            summary: "NVMe {{ $labels.device }} on {{ $labels.instance }} is at {{ $value }}% rated wear"
+            description: >-
+              The drive is at or past the end of its rated endurance. It will
+              likely keep working for a while, but it is now operating outside
+              what the manufacturer stands behind, and replacement should be
+              scheduled rather than considered.
+        # A drive that has consumed its spare area is no longer masking media
+        # defects, which is a materially different state from being worn:
+        # wear is a budget, spare exhaustion is damage.
+        - alert: NvmeDriveSpareExhausted
+          expr: smartctl_device_available_spare <= smartctl_device_available_spare_threshold
+          for: 15m
+          labels:
+            severity: critical
+          annotations:
+            summary: "NVMe {{ $labels.device }} on {{ $labels.instance }} has exhausted its spare area"
+            description: >-
+              Available spare has fallen to the manufacturer's threshold. The
+              drive has run out of reserve blocks to remap failures into.
+              Replace it.
+        - alert: NvmeDriveCriticalWarning
+          # The NVMe critical warning byte is a bitfield: spare below
+          # threshold, temperature out of range, degraded reliability,
+          # read-only mode, volatile-memory backup failed. Any non-zero value
+          # is the drive itself asking for attention.
+          expr: smartctl_device_critical_warning > 0
+          for: 5m
+          labels:
+            severity: critical
+          annotations:
+            summary: "NVMe {{ $labels.device }} on {{ $labels.instance }} reports critical warning {{ $value }}"
+            description: >-
+              The drive has raised its own critical warning flag. Read the
+              detail with `smartctl -a` on the node; the value is a bitfield,
+              not a count.
+        - alert: NvmeDriveMediaErrors
+          # Unlike wear, this counter should never move. Alert on the increase
+          # rather than the absolute value, so a drive that recorded errors
+          # long ago does not alert forever while a drive that starts failing
+          # today does.
+          expr: increase(smartctl_device_media_errors[6h]) > 0
+          for: 5m
+          labels:
+            severity: warning
+          annotations:
+            summary: "NVMe {{ $labels.device }} on {{ $labels.instance }} recorded {{ $value }} new media errors"
+            description: >-
+              The drive reported unrecoverable data-integrity errors in the
+              last six hours. A healthy drive never increments this. Check
+              whether Ceph has logged scrub errors on the same node.
+        # Without this the whole group is silently useless: no series means no
+        # alert fires, and a dashboard of empty panels reads much like a
+        # healthy one. This is the check that the checks are running.
+        - alert: SmartctlExporterIncomplete
+          # Compared against node-exporter's own NVMe inventory rather than a
+          # written-down fleet size. Adding or removing a drive then moves both
+          # sides together, so this cannot rot into a permanent false alarm the
+          # way a hardcoded count would.
+          expr: count(smartctl_device_percentage_used) < count(node_nvme_info) or absent(smartctl_device_percentage_used)
+          for: 30m
+          labels:
+            severity: warning
+          annotations:
+            summary: "Fewer NVMe drives report SMART than node-exporter can see"
+            description: >-
+              Some drives visible to node-exporter are not reporting SMART, or
+              none are. Either a DaemonSet pod is down or a drive stopped
+              answering — both mean the wear alerts above have stopped watching
+              part of the fleet, which looks identical to everything being
+              fine.

kubernetes/apps/monitoring-rules/smartctl-exporter-servicemonitor.yaml

@@ -0,0 +1,29 @@
+apiVersion: monitoring.coreos.com/v1
+kind: ServiceMonitor
+metadata:
+  name: smartctl-exporter
+  namespace: monitoring
+  labels:
+    app.kubernetes.io/name: smartctl-exporter
+    # kube-prometheus-stack's Prometheus resource selects ServiceMonitors
+    # by this label; without it the resource exists but is never
+    # discovered.
+    release: kube-prometheus-stack
+spec:
+  selector:
+    matchLabels:
+      app.kubernetes.io/name: smartctl-exporter
+  endpoints:
+    # smartctl itself polls the drives every 60s, so scraping faster than that
+    # returns the same numbers with a new timestamp. Wear moves on a scale of
+    # weeks; 60s is already far finer than the signal.
+    - port: http-metrics
+      path: /metrics
+      interval: 60s
+      relabelings:
+        # Without this every series is labelled with the exporter pod's IP and
+        # nothing else. A DaemonSet pod's IP says nothing about which machine
+        # the drive is in, and it changes on every reschedule — so the wear
+        # figure would be unattributable, which is most of its value gone.
+        - sourceLabels: [__meta_kubernetes_pod_node_name]
+          targetLabel: node

kubernetes/apps/monitoring/dashboards/disk-health.json

@@ -0,0 +1,270 @@
+{
+  "annotations": {"list": []},
+  "description": "NVMe throughput, latency and temperature per node. Every panel joins node_disk_* to node_nvme_info and node_uname_info on purpose: device names are NOT stable across nodes (nvme0 is the Kingston system disk on k8s-1 and k8s-3, but the Crucial on k8s-2), so a legend keyed on the device alone compares different hardware. Endurance/wear is deliberately absent — see the note at the bottom and issue #549.",
+  "editable": true,
+  "fiscalYearStartMonth": 0,
+  "graphTooltip": 1,
+  "id": null,
+  "links": [],
+  "panels": [
+    {
+      "datasource": {"type": "prometheus", "uid": "prometheus"},
+      "description": "Which physical drive is which, resolved live rather than written down. The OSD column comes from ceph_disk_occupation, so it follows Rook instead of restating a device list that would go stale the next time a drive is swapped.",
+      "fieldConfig": {
+        "defaults": {
+          "color": {"mode": "thresholds"},
+          "custom": {"align": "auto", "cellOptions": {"type": "auto"}, "inspect": false},
+          "mappings": [],
+          "thresholds": {"mode": "absolute", "steps": [{"color": "text", "value": null}]}
+        },
+        "overrides": []
+      },
+      "gridPos": {"h": 9, "w": 24, "x": 0, "y": 0},
+      "id": 1,
+      "options": {"cellHeight": "sm", "footer": {"countRows": false, "fields": "", "reducer": ["sum"], "show": false}, "showHeader": true, "sortBy": [{"desc": false, "displayName": "node"}]},
+      "targets": [
+        {
+          "datasource": {"type": "prometheus", "uid": "prometheus"},
+          "expr": "node_nvme_info * on (instance) group_left(nodename) node_uname_info",
+          "format": "table",
+          "instant": true,
+          "legendFormat": "",
+          "refId": "A"
+        }
+      ],
+      "title": "Drive inventory",
+      "transformations": [
+        {
+          "id": "organize",
+          "options": {
+            "excludeByName": {"Time": true, "Value": true, "__name__": true, "cntlid": true, "container": true, "endpoint": true, "instance": true, "job": true, "namespace": true, "pod": true, "service": true, "domainname": true, "machine": true, "release": true, "sysname": true, "version": true, "state": true},
+            "indexByName": {},
+            "renameByName": {"nodename": "node", "device": "device", "model": "model", "serial": "serial", "firmware_revision": "firmware"}
+          }
+        }
+      ],
+      "type": "table"
+    },
+    {
+      "datasource": {"type": "prometheus", "uid": "prometheus"},
+      "description": "Read and write throughput per drive.",
+      "fieldConfig": {
+        "defaults": {
+          "color": {"mode": "palette-classic"},
+          "custom": {"axisCenteredZero": false, "axisColorMode": "text", "axisPlacement": "auto", "barAlignment": 0, "drawStyle": "line", "fillOpacity": 10, "gradientMode": "none", "hideFrom": {"legend": false, "tooltip": false, "viz": false}, "lineInterpolation": "smooth", "lineWidth": 2, "pointSize": 5, "scaleDistribution": {"type": "linear"}, "showPoints": "never", "spanNulls": false, "stacking": {"group": "A", "mode": "none"}, "thresholdsStyle": {"mode": "off"}},
+          "mappings": [],
+          "thresholds": {"mode": "absolute", "steps": [{"color": "green", "value": null}]},
+          "unit": "Bps"
+        },
+        "overrides": []
+      },
+      "gridPos": {"h": 9, "w": 12, "x": 0, "y": 9},
+      "id": 2,
+      "options": {"legend": {"calcs": ["mean", "max"], "displayMode": "table", "placement": "bottom", "showLegend": true}, "tooltip": {"mode": "multi", "sort": "desc"}},
+      "targets": [
+        {
+          "datasource": {"type": "prometheus", "uid": "prometheus"},
+          "expr": "label_replace(rate(node_disk_read_bytes_total{device=~\"nvme[0-9]+n[0-9]+\"}[$__rate_interval]), \"nvmedev\", \"$1\", \"device\", \"(nvme[0-9]+)n[0-9]+\") * on (instance, nvmedev) group_left(model) label_replace(node_nvme_info, \"nvmedev\", \"$1\", \"device\", \"(nvme[0-9]+)\") * on (instance) group_left(nodename) node_uname_info",
+          "legendFormat": "read {{nodename}} {{model}}",
+          "refId": "A"
+        },
+        {
+          "datasource": {"type": "prometheus", "uid": "prometheus"},
+          "expr": "label_replace(rate(node_disk_written_bytes_total{device=~\"nvme[0-9]+n[0-9]+\"}[$__rate_interval]), \"nvmedev\", \"$1\", \"device\", \"(nvme[0-9]+)n[0-9]+\") * on (instance, nvmedev) group_left(model) label_replace(node_nvme_info, \"nvmedev\", \"$1\", \"device\", \"(nvme[0-9]+)\") * on (instance) group_left(nodename) node_uname_info",
+          "legendFormat": "write {{nodename}} {{model}}",
+          "refId": "B"
+        }
+      ],
+      "title": "Throughput",
+      "type": "timeseries"
+    },
+    {
+      "datasource": {"type": "prometheus", "uid": "prometheus"},
+      "description": "Completed operations per second. Read together with throughput this separates many small operations from few large ones.",
+      "fieldConfig": {
+        "defaults": {
+          "color": {"mode": "palette-classic"},
+          "custom": {"axisCenteredZero": false, "axisColorMode": "text", "axisPlacement": "auto", "barAlignment": 0, "drawStyle": "line", "fillOpacity": 10, "gradientMode": "none", "hideFrom": {"legend": false, "tooltip": false, "viz": false}, "lineInterpolation": "smooth", "lineWidth": 2, "pointSize": 5, "scaleDistribution": {"type": "linear"}, "showPoints": "never", "spanNulls": false, "stacking": {"group": "A", "mode": "none"}, "thresholdsStyle": {"mode": "off"}},
+          "mappings": [],
+          "thresholds": {"mode": "absolute", "steps": [{"color": "green", "value": null}]},
+          "unit": "iops"
+        },
+        "overrides": []
+      },
+      "gridPos": {"h": 9, "w": 12, "x": 12, "y": 9},
+      "id": 3,
+      "options": {"legend": {"calcs": ["mean", "max"], "displayMode": "table", "placement": "bottom", "showLegend": true}, "tooltip": {"mode": "multi", "sort": "desc"}},
+      "targets": [
+        {
+          "datasource": {"type": "prometheus", "uid": "prometheus"},
+          "expr": "label_replace(rate(node_disk_reads_completed_total{device=~\"nvme[0-9]+n[0-9]+\"}[$__rate_interval]), \"nvmedev\", \"$1\", \"device\", \"(nvme[0-9]+)n[0-9]+\") * on (instance, nvmedev) group_left(model) label_replace(node_nvme_info, \"nvmedev\", \"$1\", \"device\", \"(nvme[0-9]+)\") * on (instance) group_left(nodename) node_uname_info",
+          "legendFormat": "read {{nodename}} {{model}}",
+          "refId": "A"
+        },
+        {
+          "datasource": {"type": "prometheus", "uid": "prometheus"},
+          "expr": "label_replace(rate(node_disk_writes_completed_total{device=~\"nvme[0-9]+n[0-9]+\"}[$__rate_interval]), \"nvmedev\", \"$1\", \"device\", \"(nvme[0-9]+)n[0-9]+\") * on (instance, nvmedev) group_left(model) label_replace(node_nvme_info, \"nvmedev\", \"$1\", \"device\", \"(nvme[0-9]+)\") * on (instance) group_left(nodename) node_uname_info",
+          "legendFormat": "write {{nodename}} {{model}}",
+          "refId": "B"
+        }
+      ],
+      "title": "IOPS",
+      "type": "timeseries"
+    },
+    {
+      "datasource": {"type": "prometheus", "uid": "prometheus"},
+      "description": "Mean service time per operation, derived as accumulated time divided by completed operations. This is an average and will not show a tail — a drive can look healthy here while a small fraction of operations stall. The line disappears while a device is idle, because the denominator is zero; that is absence of traffic, not absence of a problem.",
+      "fieldConfig": {
+        "defaults": {
+          "color": {"mode": "palette-classic"},
+          "custom": {"axisCenteredZero": false, "axisColorMode": "text", "axisPlacement": "auto", "barAlignment": 0, "drawStyle": "line", "fillOpacity": 10, "gradientMode": "none", "hideFrom": {"legend": false, "tooltip": false, "viz": false}, "lineInterpolation": "smooth", "lineWidth": 2, "pointSize": 5, "scaleDistribution": {"type": "linear"}, "showPoints": "never", "spanNulls": false, "stacking": {"group": "A", "mode": "none"}, "thresholdsStyle": {"mode": "off"}},
+          "mappings": [],
+          "thresholds": {"mode": "absolute", "steps": [{"color": "green", "value": null}]},
+          "unit": "s"
+        },
+        "overrides": []
+      },
+      "gridPos": {"h": 9, "w": 12, "x": 0, "y": 18},
+      "id": 4,
+      "options": {"legend": {"calcs": ["mean", "max"], "displayMode": "table", "placement": "bottom", "showLegend": true}, "tooltip": {"mode": "multi", "sort": "desc"}},
+      "targets": [
+        {
+          "datasource": {"type": "prometheus", "uid": "prometheus"},
+          "expr": "label_replace(rate(node_disk_read_time_seconds_total{device=~\"nvme[0-9]+n[0-9]+\"}[$__rate_interval]) / rate(node_disk_reads_completed_total{device=~\"nvme[0-9]+n[0-9]+\"}[$__rate_interval]), \"nvmedev\", \"$1\", \"device\", \"(nvme[0-9]+)n[0-9]+\") * on (instance, nvmedev) group_left(model) label_replace(node_nvme_info, \"nvmedev\", \"$1\", \"device\", \"(nvme[0-9]+)\") * on (instance) group_left(nodename) node_uname_info",
+          "legendFormat": "read {{nodename}} {{model}}",
+          "refId": "A"
+        },
+        {
+          "datasource": {"type": "prometheus", "uid": "prometheus"},
+          "expr": "label_replace(rate(node_disk_write_time_seconds_total{device=~\"nvme[0-9]+n[0-9]+\"}[$__rate_interval]) / rate(node_disk_writes_completed_total{device=~\"nvme[0-9]+n[0-9]+\"}[$__rate_interval]), \"nvmedev\", \"$1\", \"device\", \"(nvme[0-9]+)n[0-9]+\") * on (instance, nvmedev) group_left(model) label_replace(node_nvme_info, \"nvmedev\", \"$1\", \"device\", \"(nvme[0-9]+)\") * on (instance) group_left(nodename) node_uname_info",
+          "legendFormat": "write {{nodename}} {{model}}",
+          "refId": "B"
+        }
+      ],
+      "title": "Mean operation latency",
+      "type": "timeseries"
+    },
+    {
+      "datasource": {"type": "prometheus", "uid": "prometheus"},
+      "description": "Fraction of wall-clock time the device had at least one operation in flight, and the number of operations queued. Utilisation near 100% on an NVMe drive does not mean saturation the way it does on a spindle — these devices serve many operations in parallel — so read it alongside the queue depth.",
+      "fieldConfig": {
+        "defaults": {
+          "color": {"mode": "palette-classic"},
+          "custom": {"axisCenteredZero": false, "axisColorMode": "text", "axisPlacement": "auto", "barAlignment": 0, "drawStyle": "line", "fillOpacity": 10, "gradientMode": "none", "hideFrom": {"legend": false, "tooltip": false, "viz": false}, "lineInterpolation": "smooth", "lineWidth": 2, "pointSize": 5, "scaleDistribution": {"type": "linear"}, "showPoints": "never", "spanNulls": false, "stacking": {"group": "A", "mode": "none"}, "thresholdsStyle": {"mode": "off"}},
+          "mappings": [],
+          "thresholds": {"mode": "absolute", "steps": [{"color": "green", "value": null}]},
+          "unit": "percentunit"
+        },
+        "overrides": [
+          {
+            "matcher": {"id": "byRegexp", "options": "queue .*"},
+            "properties": [{"id": "unit", "value": "short"}, {"id": "custom.axisPlacement", "value": "right"}]
+          }
+        ]
+      },
+      "gridPos": {"h": 9, "w": 12, "x": 12, "y": 18},
+      "id": 5,
+      "options": {"legend": {"calcs": ["mean", "max"], "displayMode": "table", "placement": "bottom", "showLegend": true}, "tooltip": {"mode": "multi", "sort": "desc"}},
+      "targets": [
+        {
+          "datasource": {"type": "prometheus", "uid": "prometheus"},
+          "expr": "label_replace(rate(node_disk_io_time_seconds_total{device=~\"nvme[0-9]+n[0-9]+\"}[$__rate_interval]), \"nvmedev\", \"$1\", \"device\", \"(nvme[0-9]+)n[0-9]+\") * on (instance, nvmedev) group_left(model) label_replace(node_nvme_info, \"nvmedev\", \"$1\", \"device\", \"(nvme[0-9]+)\") * on (instance) group_left(nodename) node_uname_info",
+          "legendFormat": "busy {{nodename}} {{model}}",
+          "refId": "A"
+        },
+        {
+          "datasource": {"type": "prometheus", "uid": "prometheus"},
+          "expr": "label_replace(node_disk_io_now{device=~\"nvme[0-9]+n[0-9]+\"}, \"nvmedev\", \"$1\", \"device\", \"(nvme[0-9]+)n[0-9]+\") * on (instance, nvmedev) group_left(model) label_replace(node_nvme_info, \"nvmedev\", \"$1\", \"device\", \"(nvme[0-9]+)\") * on (instance) group_left(nodename) node_uname_info",
+          "legendFormat": "queue {{nodename}} {{model}}",
+          "refId": "B"
+        }
+      ],
+      "title": "Utilisation and queue depth",
+      "type": "timeseries"
+    },
+    {
+      "datasource": {"type": "prometheus", "uid": "prometheus"},
+      "description": "Composite temperature reported by each controller, read from hwmon in sysfs. This is the one health value available without an admin ioctl, which is why it is the only SMART-adjacent series on this dashboard.",
+      "fieldConfig": {
+        "defaults": {
+          "color": {"mode": "palette-classic"},
+          "custom": {"axisCenteredZero": false, "axisColorMode": "text", "axisPlacement": "auto", "barAlignment": 0, "drawStyle": "line", "fillOpacity": 10, "gradientMode": "none", "hideFrom": {"legend": false, "tooltip": false, "viz": false}, "lineInterpolation": "smooth", "lineWidth": 2, "pointSize": 5, "scaleDistribution": {"type": "linear"}, "showPoints": "never", "spanNulls": false, "stacking": {"group": "A", "mode": "none"}, "thresholdsStyle": {"mode": "dashed"}},
+          "mappings": [],
+          "thresholds": {"mode": "absolute", "steps": [{"color": "green", "value": null}, {"color": "orange", "value": 70}, {"color": "red", "value": 80}]},
+          "unit": "celsius"
+        },
+        "overrides": []
+      },
+      "gridPos": {"h": 9, "w": 12, "x": 0, "y": 27},
+      "id": 6,
+      "options": {"legend": {"calcs": ["mean", "max"], "displayMode": "table", "placement": "bottom", "showLegend": true}, "tooltip": {"mode": "multi", "sort": "desc"}},
+      "targets": [
+        {
+          "datasource": {"type": "prometheus", "uid": "prometheus"},
+          "expr": "label_replace(node_hwmon_temp_celsius{chip=~\"nvme_nvme[0-9]+\", sensor=\"temp1\"}, \"nvmedev\", \"$1\", \"chip\", \"nvme_(nvme[0-9]+)\") * on (instance, nvmedev) group_left(model) label_replace(node_nvme_info, \"nvmedev\", \"$1\", \"device\", \"(nvme[0-9]+)\") * on (instance) group_left(nodename) node_uname_info",
+          "legendFormat": "{{nodename}} {{model}}",
+          "refId": "A"
+        }
+      ],
+      "title": "Controller temperature",
+      "type": "timeseries"
+    },
+    {
+      "datasource": {"type": "prometheus", "uid": "prometheus"},
+      "description": "Ceph's own view of the OSDs, for comparison with the block-layer numbers above. A divergence between these and the device latency is the interesting case: it points at Ceph rather than at the hardware.",
+      "fieldConfig": {
+        "defaults": {
+          "color": {"mode": "palette-classic"},
+          "custom": {"axisCenteredZero": false, "axisColorMode": "text", "axisPlacement": "auto", "barAlignment": 0, "drawStyle": "line", "fillOpacity": 10, "gradientMode": "none", "hideFrom": {"legend": false, "tooltip": false, "viz": false}, "lineInterpolation": "smooth", "lineWidth": 2, "pointSize": 5, "scaleDistribution": {"type": "linear"}, "showPoints": "never", "spanNulls": false, "stacking": {"group": "A", "mode": "none"}, "thresholdsStyle": {"mode": "off"}},
+          "mappings": [],
+          "thresholds": {"mode": "absolute", "steps": [{"color": "green", "value": null}]},
+          "unit": "ms"
+        },
+        "overrides": []
+      },
+      "gridPos": {"h": 9, "w": 12, "x": 12, "y": 27},
+      "id": 7,
+      "options": {"legend": {"calcs": ["mean", "max"], "displayMode": "table", "placement": "bottom", "showLegend": true}, "tooltip": {"mode": "multi", "sort": "desc"}},
+      "targets": [
+        {
+          "datasource": {"type": "prometheus", "uid": "prometheus"},
+          "expr": "ceph_osd_apply_latency_ms",
+          "legendFormat": "apply {{ceph_daemon}}",
+          "refId": "A"
+        },
+        {
+          "datasource": {"type": "prometheus", "uid": "prometheus"},
+          "expr": "ceph_osd_commit_latency_ms",
+          "legendFormat": "commit {{ceph_daemon}}",
+          "refId": "B"
+        }
+      ],
+      "title": "Ceph OSD latency",
+      "type": "timeseries"
+    },
+    {
+      "datasource": {"type": "prometheus", "uid": "prometheus"},
+      "gridPos": {"h": 8, "w": 24, "x": 0, "y": 36},
+      "id": 8,
+      "options": {
+        "code": {"language": "plaintext", "showLineNumbers": false, "showMiniMap": false},
+        "content": "### What this dashboard cannot tell you\n\n**Endurance is missing.** There is no wear, no written-bytes total, no power-on hours and no media-error count here, because no exporter in this cluster produces them. NVMe reports those over an admin ioctl that needs elevated privileges, and temperature is the only health value the kernel publishes through sysfs. Tracked as **#549** — do not read a healthy dashboard as a healthy drive.\n\n**The three roles are not interchangeable.** Each node carries a Kingston OM8PGP41024Q as the Talos system disk, a Samsung PM983 that Rook claims as the Ceph OSD, and a Crucial P3 that was retired from Ceph and now carries the EPHEMERAL volume. The Crucial drives were replaced *because* they were worn, so the drive with the least endurance left is the one holding container state — and it is the one nothing is watching.\n\n**Device names are not identity.** `nvme0` is the Kingston on k8s-1 and k8s-3 and the Crucial on k8s-2. Every panel here resolves the model through `node_nvme_info` for that reason; a query written against a bare device name compares different hardware and will keep doing so silently.",
+        "mode": "markdown"
+      },
+      "title": "Gaps and caveats",
+      "type": "text"
+    }
+  ],
+  "preload": false,
+  "refresh": "1m",
+  "schemaVersion": 39,
+  "tags": ["storage", "nvme", "ceph"],
+  "templating": {"list": []},
+  "time": {"from": "now-6h", "to": "now"},
+  "timepicker": {},
+  "timezone": "",
+  "title": "Disk Health",
+  "uid": "disk-health",
+  "version": 1,
+  "weekStart": ""
+}

kubernetes/apps/monitoring/dashboards/kustomization.yaml

@@ -7,9 +7,12 @@ namespace: monitoring
 # the kube-prometheus-stack Grafana sidecar watches for.
 #
 # To add a dashboard:
-#   1. Copy the ported JSON to this directory as <name>.json
+#   1. Copy the JSON to this directory as <name>.json
 #   2. Add a configMapGenerator entry below referencing the file
-#   3. Tick off the row in ../DASHBOARD-MIGRATION.md
+#
+# There used to be a third step, ticking a row off ../DASHBOARD-MIGRATION.md.
+# That file no longer exists anywhere in the repo — the port it tracked is
+# finished — so following the instruction was impossible.
 #
 # Dashboard datasource UIDs must match K8s Grafana datasources:
 #   - prometheus  (kube-prom-stack default, in-cluster)
@@ -35,6 +38,9 @@ configMapGenerator:
   - name: dashboard-blackbox-overview
     files:
       - blackbox-overview.json
+  - name: dashboard-disk-health
+    files:
+      - disk-health.json
   - name: dashboard-gitea-overview
     files:
       - gitea-overview.json

kubernetes/apps/monitoring/kustomization.yaml

@@ -15,6 +15,7 @@ resources:
   - prometheus-gate-service.yaml
   - prometheus-gate-ingress.yaml
   - ci-diagnostics-rbac.yaml
+  - smartctl-exporter.yaml
   - dashboards/
 # prometheusrule-garage.yaml lives in ./monitoring-rules/ and is applied by a
 # separate Flux Kustomization that dependsOn `monitoring` — otherwise the

kubernetes/apps/monitoring/smartctl-exporter.yaml

@@ -0,0 +1,123 @@
+# SMART/endurance metrics for every NVMe drive in the fleet (#549).
+#
+# WHY THIS HOLDS ELEVATED CAPABILITIES, and why that is a deliberate exception
+# rather than an oversight:
+#
+# NVMe reports health over an admin ioctl on the character device
+# (NVME_IOCTL_ADMIN_CMD), which the kernel gates on CAP_SYS_ADMIN. There is no
+# sysfs path for wear, media errors or written-bytes totals — hwmon publishes
+# the controller temperature and nothing else. Upstream smartctl_exporter
+# documents `privileged: true` and `user: root` for exactly this reason.
+#
+# The alternative that needs no privileges — reading Ceph's devicehealth
+# archive, which does hold full smartctl output — covers OSD drives only. In
+# this cluster that is three of nine, and the six it misses include the drives
+# that were retired from Ceph for wear and now carry EPHEMERAL. Covering the
+# healthy drives and not the worn ones was judged not worth a new service; the
+# owner chose fleet-wide coverage with the privilege exception instead.
+#
+# The exception is kept as small as the kernel allows: no `privileged: true`,
+# no host namespaces, no hostPID. Only CAP_SYS_ADMIN and CAP_SYS_RAWIO are
+# added, everything else is dropped, and the only host mount is /dev — which
+# is required because the exporter must open the NVMe character devices and
+# Kubernetes has no way to pass individual character devices to a pod without
+# a device plugin.
+#
+# If this ever needs revisiting: the thing to check is whether the kernel has
+# grown a sysfs interface for NVMe health, not whether some other exporter
+# needs fewer privileges. The requirement comes from the ioctl gate, not from
+# the tool.
+#
+# Upstream had no release between 2025-04-22 (v0.14.0) and this deployment.
+# The repository is not archived; the pin is simply its newest tag.
+apiVersion: apps/v1
+kind: DaemonSet
+metadata:
+  name: smartctl-exporter
+  namespace: monitoring
+  labels:
+    app.kubernetes.io/name: smartctl-exporter
+spec:
+  selector:
+    matchLabels:
+      app.kubernetes.io/name: smartctl-exporter
+  template:
+    metadata:
+      labels:
+        app.kubernetes.io/name: smartctl-exporter
+    spec:
+      # Control planes are also the storage nodes here, so the exporter has to
+      # tolerate the control-plane taint or it would cover nothing at all.
+      tolerations:
+        - key: node-role.kubernetes.io/control-plane
+          operator: Exists
+          effect: NoSchedule
+      containers:
+        - name: smartctl-exporter
+          image: quay.io/prometheuscommunity/smartctl-exporter:v0.14.0
+          # No --smartctl.device on purpose: the exporter scans for devices
+          # itself and rescans every 10m by default. Device names are not
+          # stable across these machines, so a hardcoded list would quietly
+          # stop covering a drive the next time one is replaced.
+          args:
+            - --web.listen-address=:9633
+          ports:
+            - name: http-metrics
+              containerPort: 9633
+              protocol: TCP
+          securityContext:
+            # Root plus two capabilities, NOT privileged. See the header.
+            runAsUser: 0
+            runAsNonRoot: false
+            privileged: false
+            allowPrivilegeEscalation: false
+            readOnlyRootFilesystem: true
+            capabilities:
+              drop: ["ALL"]
+              add: ["SYS_ADMIN", "SYS_RAWIO"]
+          volumeMounts:
+            - name: dev
+              mountPath: /dev
+              readOnly: true
+            # smartctl is not known to need scratch space, but the root
+            # filesystem is read-only and a tool that turns out to want /tmp
+            # would crashloop instead of degrading. Cheaper to provide it than
+            # to find out from a restart counter.
+            - name: tmp
+              mountPath: /tmp
+          resources:
+            requests:
+              cpu: 10m
+              memory: 32Mi
+            limits:
+              memory: 128Mi
+          livenessProbe:
+            httpGet:
+              path: /metrics
+              port: http-metrics
+            initialDelaySeconds: 15
+            periodSeconds: 30
+      volumes:
+        - name: dev
+          hostPath:
+            path: /dev
+            type: Directory
+        - name: tmp
+          emptyDir: {}
+---
+apiVersion: v1
+kind: Service
+metadata:
+  name: smartctl-exporter
+  namespace: monitoring
+  labels:
+    app.kubernetes.io/name: smartctl-exporter
+spec:
+  clusterIP: None
+  selector:
+    app.kubernetes.io/name: smartctl-exporter
+  ports:
+    - name: http-metrics
+      port: 9633
+      targetPort: http-metrics
+      protocol: TCP

kubernetes/infrastructure/admission-policies/woodpecker-ci-restrict.yaml

@@ -12,9 +12,11 @@
 #   * host namespaces + hostPath volumes: denied for every step pod (neither
 #     kaniko nor the buildx plugin needs them).
 #   * privileged containers: denied EXCEPT the allow-listed buildx plugin image.
-# Verified non-breaking: this repo's own builds use rootless kaniko
-# (gcr.io/kaniko-project/executor) which needs none of the above; only the
-# external buildx plugin needs privileged, and it is allow-listed by image ref.
+# Verified non-breaking: this repo's own builds use rootless kaniko, which needs
+# none of the above; only the external buildx plugin needs privileged, and it is
+# allow-listed by image ref. The kaniko image moved off gcr.io to the maintained
+# chainguard-dev fork in #552 — no policy change was needed, because nothing
+# here matches on the kaniko image, only on the buildx one.
 #
 # ValidatingAdmissionPolicy is GA / in-tree on the cluster's Kubernetes v1.35 —
 # no external admission controller (Kyverno/Gatekeeper) is introduced.

kubernetes/infrastructure/post-crds/velero-schedules.yaml

@@ -203,16 +203,16 @@ metadata:
   labels:
     app.kubernetes.io/part-of: homelab-backup
 spec:
-  # Daily at 06:45 local (next free stagger slot). All nine PVCs live
-  # in the home-assistant namespace regardless of which app/ dir owns
+  # Daily at 06:45 local (next free stagger slot). The app PVCs live in
+  # the home-assistant namespace regardless of which app/ dir owns
   # their manifest (matter-server, otbr, whisper, speech-to-phrase,
   # zone-configurator all set `namespace: home-assistant` via their
   # Kustomization, not per-resource): home-assistant-config (.storage
   # entity registry, recorder DB, secrets.yaml), esphome-data,
   # shelly-manager-data, matter-server-data, otbr-data, whisper-data,
-  # speech-to-phrase-models, speech-to-phrase-train,
-  # zone-configurator-config. No CNPG cluster in this namespace, so no
-  # label exclusion is needed. On restore, home-assistant-config has its
+  # speech-to-phrase-models, speech-to-phrase-train, zigbee2mqtt-data,
+  # zwavejs-store, zone-configurator-config. On restore,
+  # home-assistant-config has its
   # own path (the HA pod's `seed` initContainer pulling the native HAOS
   # backup from Garage, see the home-assistant Kustomization comment in
   # kubernetes/clusters/homelab/home-assistant.yaml); layering a Velero
@@ -229,6 +229,20 @@ spec:
     storageLocation: default
     ttl: 720h0m0s
     snapshotMoveData: true
+    # The ha-pg CNPG cluster now runs in this namespace (it did not when
+    # this schedule was written — the old comment here still claimed
+    # "no CNPG cluster in this namespace"). Its PVC ha-pg-1 carries the
+    # cnpg.io/cluster label and was being swept in: a crash-consistent
+    # snapshot of a running Postgres data directory is not a restorable
+    # backup, the same trap the wordpress-daily comment below describes.
+    # ha-pg is covered by Barman — daily base backup at 02:50 UTC
+    # (kubernetes/apps/home-assistant/ha-pg-scheduled-backup.yaml) plus
+    # continuous WAL archiving — so this exclusion removes a redundant
+    # 20 GiB upload, matching paperless/authentik/immich/trmnl above.
+    labelSelector:
+      matchExpressions:
+        - key: cnpg.io/cluster
+          operator: DoesNotExist
 ---
 apiVersion: velero.io/v1
 kind: Schedule