feat: give the remaining unprobed workloads a health check

Continues the paperless change. Under the split where gatus watches from outside and Kubernetes watches the pods, a container with no probe at all is the hole: it stays Ready while dead, and nothing downstream can tell. Not every one of them got a probe, and the ones that did not are the more interesting half. Added: whisper, openwakeword tcpSocket on the wyoming port. These speak a raw speech-to-phrase TCP protocol with no HTTP surface and no health verb, so accepting a connection is all that can be asserted from outside the process. Weak, but the previous state was nothing at all, and a dead server kept being routed speech. speech-to-phrase gets a startupProbe rather than a long liveness delay: it runs --retrain-on-start and retraining takes as long as it takes. The gate allows 10 minutes and only then hands over, so a slow retrain is not mistaken for a hang while a real hang is still caught in a minute. ftp-scanner tcpSocket on the FTP control port. This is the failure that hides best: if vsftpd dies, the scanner cannot deposit anything and paperless just sees an empty consume directory, which looks exactly like nobody having scanned. code-server httpGet /healthz. Answers 200 whenever the server is up; its body reports session heartbeat, which is not health — an idle editor reports "expired" and is fine. external-secrets livenessProbe/readinessProbe enabled through the chart's own values, which is also what starts its health server: without them the controller exposes nothing but a metrics port. A wedged reconciler stayed Ready while every ExternalSecret silently stopped refreshing. Deliberately left alone: protonmail-bridge Already carries a rationale: the bridge can be offline while the user re-authenticates, and paperless retries mail fetches itself. A liveness probe would restart it mid-re-auth. That is a considered decision, not an omission. bridge-tls-proxy socat binds 127.0.0.1:11143. Probes are dialled by the kubelet against the pod IP, so there is nothing for it to reach. mariadb-operator Its chart exposes no probe values and no health bind address. Forcing them through a postRenderer would break on the next chart bump, so it stays unprobed and this records why. ak-outpost-* (11) Pod specs are owned by the goauthentik.io operator; nothing here can add to them. Validated with Flux's field manager against the live cluster.
fix(paperless): probe a real Django view instead of a TCP connect
2026-08-28 13:24:05 +02:00 · 2026-08-28 12:59:19 +02:00 · 2026-08-28 12:09:26 +02:00 · 2026-08-28 12:08:46 +02:00 · 2026-08-28 11:54:27 +02:00 · 2026-08-28 11:44:19 +02:00
102 changed files with 2191 additions and 2017 deletions
@@ -32,13 +32,13 @@
 #              mechanism as update-audit.yml):
 #                woodpecker repo cron add --repo k.renner/homelab \
 #                  --name alert-monitor --branch master --schedule '*/15 * * * *'
-#   - manual : woodpecker pipeline create --branch master \
-#                --var PIPELINE=alert-monitor k.renner/homelab
+#   - deploy : woodpecker-cli pipeline deploy k.renner/homelab <n> alert-monitor
+#              where <n> is an existing pipeline to promote.
 when:
  - event: cron
    cron: alert-monitor
-  - event: manual
-    evaluate: 'PIPELINE == "alert-monitor"'
+  - event: deployment
+    evaluate: 'CI_PIPELINE_DEPLOY_TARGET == "alert-monitor"'

 steps:
  - name: fetch-alerts
@@ -101,7 +101,7 @@ steps:
        bash scripts/ci/make-diag-kubeconfig.sh

  - name: alert-triage-agent
-    image: gitea.renner.uno/gitea_admin/ci-claude:2.1.218
+    image: gitea.renner.uno/gitea_admin/ci-claude:2.1.250
    environment:
      CLAUDE_CODE_OAUTH_TOKEN:
        from_secret: claude_code_oauth_token
@@ -1,6 +1,17 @@
 # Builds the CI tooling images (and the secret-rotator runtime image) with
 # kaniko and pushes them to the Gitea container registry.
 #
+# The kaniko image is NOT Google's. Google archived
+# GoogleContainerTools/kaniko on 2025-06-03, but the original authors forked
+# it to chainguard-dev/kaniko and kept releasing — the pin here is well past
+# the v1.24.0 the Google repo ended on. The fork ships no binaries or images
+# of its own, so these come from gitlab-ci-utils, which builds that fork for
+# amd64 and arm64 under versioned tags. A generic `:debug` tag exists there
+# and is deliberately unused; everything else in this repo is pinned too.
+#
+# The executor path, flags and busybox layout are unchanged from Google's
+# image, which is why the swap touched nothing but the `image:` lines (#552).
+#
 # Credential: ci_images_token — a PAT scoped to `package: read+write` and
 # NOTHING else (verified: 403 on /user/repos, /admin/users and the issues
 # API; 200 on the /v2/ registry endpoints kaniko uses). It replaces the
@@ -20,12 +31,12 @@ when:
      - "ci/images/**"
      - "secret-rotator/**"
      - ".woodpecker/build-ci-images.yml"
-  - event: manual
-    evaluate: 'PIPELINE == "build-ci-images"'
+  - event: deployment
+    evaluate: 'CI_PIPELINE_DEPLOY_TARGET == "build-ci-images"'

 steps:
  - name: build-ansible
-    image: gcr.io/kaniko-project/executor:v1.23.2-debug
+    image: registry.gitlab.com/gitlab-ci-utils/container-images/kaniko:v1.25.18-debug
    directory: ci/images/ansible
    depends_on: []
    # Only rebuild when THIS image's source (or the pipeline file) changed, or
@@ -33,7 +44,7 @@ steps:
    # secret-rotator commit needlessly rebuilt all four ~1.3G ci-* images and
    # orphaned ~5G of registry layers per run — a main driver of #336.
    when:
-      - event: manual
+      - event: deployment
      - event: push
        path: ["ci/images/ansible/**", ".woodpecker/build-ci-images.yml"]
    environment:
@@ -53,11 +64,11 @@ steps:
          --destination gitea.renner.uno/gitea_admin/ci-ansible:latest

  - name: build-k8s
-    image: gcr.io/kaniko-project/executor:v1.23.2-debug
+    image: registry.gitlab.com/gitlab-ci-utils/container-images/kaniko:v1.25.18-debug
    directory: ci/images/k8s
    depends_on: []
    when:
-      - event: manual
+      - event: deployment
      - event: push
        path: ["ci/images/k8s/**", ".woodpecker/build-ci-images.yml"]
    environment:
@@ -77,11 +88,11 @@ steps:
          --destination gitea.renner.uno/gitea_admin/ci-k8s:latest

  - name: build-tofu
-    image: gcr.io/kaniko-project/executor:v1.23.2-debug
+    image: registry.gitlab.com/gitlab-ci-utils/container-images/kaniko:v1.25.18-debug
    directory: ci/images/tofu
    depends_on: []
    when:
-      - event: manual
+      - event: deployment
      - event: push
        path: ["ci/images/tofu/**", ".woodpecker/build-ci-images.yml"]
    environment:
@@ -108,11 +119,11 @@ steps:
  # Runtime image, not CI tooling: a static musl binary in a FROM-scratch image,
  # used as the base for secret-rotation CronJobs. Replaces per-job inline Python.
  - name: build-secret-rotator
-    image: gcr.io/kaniko-project/executor:v1.23.2-debug
+    image: registry.gitlab.com/gitlab-ci-utils/container-images/kaniko:v1.25.18-debug
    directory: secret-rotator
    depends_on: []
    when:
-      - event: manual
+      - event: deployment
      - event: push
        path: ["secret-rotator/**", ".woodpecker/build-ci-images.yml"]
    environment:
@@ -137,11 +148,11 @@ steps:
  # container, but nothing about it is zigbee-specific. Exists so tools come from
  # the image rather than an `apk add` on every container start.
  - name: build-alpine-jq
-    image: gcr.io/kaniko-project/executor:v1.23.2-debug
+    image: registry.gitlab.com/gitlab-ci-utils/container-images/kaniko:v1.25.18-debug
    directory: ci/images/alpine-jq
    depends_on: []
    when:
-      - event: manual
+      - event: deployment
      - event: push
        path: ["ci/images/alpine-jq/**", ".woodpecker/build-ci-images.yml"]
    environment:
@@ -166,11 +177,11 @@ steps:
  # critical path of every node rebuild. The download now happens here, once,
  # where the sha256 is checked — see the Containerfile for the full rationale.
  - name: build-cni-plugins
-    image: gcr.io/kaniko-project/executor:v1.23.2-debug
+    image: registry.gitlab.com/gitlab-ci-utils/container-images/kaniko:v1.25.18-debug
    directory: ci/images/cni-plugins
    depends_on: []
    when:
-      - event: manual
+      - event: deployment
      - event: push
        path: ["ci/images/cni-plugins/**", ".woodpecker/build-ci-images.yml"]
    environment:
@@ -195,11 +206,11 @@ steps:
  # every paperless pod start. The openssl CLI is genuinely absent from the alpine
  # base, so this one needs an image rather than a busybox substitute.
  - name: build-alpine-openssl
-    image: gcr.io/kaniko-project/executor:v1.23.2-debug
+    image: registry.gitlab.com/gitlab-ci-utils/container-images/kaniko:v1.25.18-debug
    directory: ci/images/alpine-openssl
    depends_on: []
    when:
-      - event: manual
+      - event: deployment
      - event: push
        path: ["ci/images/alpine-openssl/**", ".woodpecker/build-ci-images.yml"]
    environment:
@@ -224,11 +235,11 @@ steps:
  # Ansible converge. Not a ci-* image -- it is a runtime artifact -- but it
  # builds the same way and lands in the same registry so the audit sees it.
  - name: build-heating-can
-    image: gcr.io/kaniko-project/executor:v1.23.2-debug
+    image: registry.gitlab.com/gitlab-ci-utils/container-images/kaniko:v1.25.18-debug
    directory: ci/images/heating-can
    depends_on: []
    when:
-      - event: manual
+      - event: deployment
      - event: push
        path: ["ci/images/heating-can/**", ".woodpecker/build-ci-images.yml"]
    environment:
@@ -18,7 +18,7 @@
 #                 consumer pins to  ci-claude:<version>  and open a PR. A human
 #                 reviews and merges it; nothing auto-merges.
 #
-# TAG SCHEME — deliberately version tags (ci-claude:2.1.218), NOT the dated
+# TAG SCHEME — deliberately version tags (ci-claude:<claude-version>), NOT the dated
 # tags the other ci-* images use. The tag encodes the thing that changes here
 # (the Claude version), which makes "did it change?" a trivial, race-free
 # string compare and keeps the weekly cron from opening no-op PRs. The other
@@ -54,8 +54,8 @@
 #
 # Triggering:
 #   - cron   : the cron NAMED exactly "ci-claude-refresh" (see above).
-#   - manual : woodpecker pipeline create --branch master \
-#                --var PIPELINE=ci-claude-refresh k.renner/homelab
+#   - deploy : woodpecker-cli pipeline deploy k.renner/homelab <n> ci-claude-refresh
+#              where <n> is an existing pipeline to promote.
 #   - push   : a change to the Containerfile (or this file) ON master forces a
 #              rebuild of the current latest version so Containerfile fixes ship
 #              promptly. Restricted to master ON PURPOSE — a feature branch must
@@ -65,8 +65,8 @@
 when:
  - event: cron
    cron: ci-claude-refresh
-  - event: manual
-    evaluate: 'PIPELINE == "ci-claude-refresh"'
+  - event: deployment
+    evaluate: 'CI_PIPELINE_DEPLOY_TARGET == "ci-claude-refresh"'
  - event: push
    branch: master
    path:
@@ -84,14 +84,24 @@ steps:
      - |
        set -eu
        mkdir -p "$$CI_WORKSPACE/.ci-refresh"
-        # Files that pin the image. Keep this list in sync with the consumers.
-        CONSUMERS="
-          .woodpecker/security-scan.yml
-          .woodpecker/alert-monitor.yml
-          .woodpecker/update-audit.yml
-          .woodpecker/pr-review.yml
-          .woodpecker/issue-fix.yml
-        "
+        # Files that pin the image, DISCOVERED rather than listed. This used to
+        # be a hardcoded list carrying the instruction "keep this in sync with
+        # the consumers" — and it was not: e2e.yml and ci-scripts-test.yml were
+        # missing, so they sat on a version no bump could ever reach. A list
+        # that must be maintained by hand is the bug; deriving it removes the
+        # failure mode instead of correcting one instance of it.
+        #
+        # Matches a version-pinned reference only, which is what excludes this
+        # file: its own steps run ci-claude:latest, and :latest never needs
+        # rewriting. That exclusion is load-bearing — do not write a literal
+        # ci-claude version anywhere in THIS file, not even in prose, or it
+        # adds itself to the consumer set and the sed below rewrites it. The
+        # tag-scheme note at the top says <claude-version> for that reason.
+        CONSUMERS=$$(grep -rlE 'ci-claude:[0-9]' .woodpecker)
+        # An empty list would make the grep below read stdin and hang forever
+        # rather than fail, so it is a hard stop.
+        [ -n "$$CONSUMERS" ] || { echo "No ci-claude consumers found — refusing to continue."; exit 1; }
+        echo "consumers: $$CONSUMERS"
        NEW=$$(npm view @anthropic-ai/claude-code version)
        case "$$NEW" in
          [0-9]*.[0-9]*.[0-9]*) : ;;
@@ -130,7 +140,7 @@ steps:
  #    --build-arg to the resolved version (not "latest") guarantees the tag and
  #    the image content agree even if a new release lands mid-run.
  - name: build
-    image: gcr.io/kaniko-project/executor:v1.23.2-debug
+    image: registry.gitlab.com/gitlab-ci-utils/container-images/kaniko:v1.25.18-debug
    directory: ci/images/claude
    depends_on: [decide]
    environment:
@@ -176,13 +186,10 @@ steps:
          echo "Branch $$BRANCH already exists — a PR for $$NEW is already open. Nothing to do."
          exit 0
        fi
-        CONSUMERS="
-          .woodpecker/security-scan.yml
-          .woodpecker/alert-monitor.yml
-          .woodpecker/update-audit.yml
-          .woodpecker/pr-review.yml
-          .woodpecker/issue-fix.yml
-        "
+        # Same discovery as the decide step — see the comment there for why this
+        # is not a maintained list.
+        CONSUMERS=$$(grep -rlE 'ci-claude:[0-9]' .woodpecker)
+        [ -n "$$CONSUMERS" ] || { echo "No ci-claude consumers found — refusing to continue."; exit 1; }
        # Exact-string swap of the current tag for the new one, consumers only.
        for f in $$CONSUMERS; do
          sed -i "s#ci-claude:$$CUR#ci-claude:$$NEW#g" "$$f"
@@ -198,7 +205,7 @@ steps:
        {
          printf 'Automated bump of the ci-claude agent image from `%s` to `%s`.\n\n' "$$CUR" "$$NEW"
          printf 'The refresh pipeline built and pushed `ci-claude:%s` (and `:latest`) from the\n' "$$NEW"
-          printf 'latest published `@anthropic-ai/claude-code`. This rewires the 5 pipelines that\n'
+          printf 'latest published `@anthropic-ai/claude-code`. This rewires the %s pipelines that\n' "$$(printf '%s\n' $$CONSUMERS | grep -c .)"
          printf 'run the image so CI stops running a stale Claude Code.\n\n'
          printf 'Merging is a human decision — review, then merge to roll it out.\n'
        } > /tmp/pr-body.md
@@ -17,6 +17,6 @@ when:

 steps:
  - name: model-selection-tests
-    image: gitea.renner.uno/gitea_admin/ci-claude:2.1.218
+    image: gitea.renner.uno/gitea_admin/ci-claude:2.1.250
    commands:
      - sh scripts/ci/test-model-selection.sh
@@ -6,8 +6,8 @@ when:
      - "ansible/roles/claude-workstation/**"
      - "ansible/plays/install-claude-workstation.yml"
      - ".woodpecker/deploy-claude-workstation.yml"
-  - event: manual
-    evaluate: 'PIPELINE == "deploy-claude-workstation"'
+  - event: deployment
+    evaluate: 'CI_PIPELINE_DEPLOY_TARGET == "deploy-claude-workstation"'

 timeout: 30

@@ -8,8 +8,8 @@ when:
    path:
      - "opentofu/**"
      - ".woodpecker/deploy-infrastructure.yml"
-  - event: manual
-    evaluate: 'PIPELINE == "deploy-infrastructure"'
+  - event: deployment
+    evaluate: 'CI_PIPELINE_DEPLOY_TARGET == "deploy-infrastructure"'

 steps:
  - name: validate-secrets
@@ -84,7 +84,7 @@ steps:
    image: gitea.renner.uno/gitea_admin/ci-tofu:2026-04-29
    directory: opentofu
    when:
-      - event: manual
+      - event: deployment
        evaluate: 'TOFU_APPLY == "true"'
    environment:
      TF_IN_AUTOMATION: "true"
@@ -7,8 +7,8 @@ when:
      - "ansible/plays/install-netbird-client.yml"
      - "ansible/inventory/group_vars/claude_workstation/**"
      - ".woodpecker/deploy-netbird-client.yml"
-  - event: manual
-    evaluate: 'PIPELINE == "deploy-netbird-client"'
+  - event: deployment
+    evaluate: 'CI_PIPELINE_DEPLOY_TARGET == "deploy-netbird-client"'

 timeout: 30

@@ -9,8 +9,8 @@ when:
      - "ansible/roles/netbird-proxy-watchdog/**"
      - "ansible/plays/install-netbird-proxy.yml"
      - ".woodpecker/deploy-netbird-proxy.yml"
-  - event: manual
-    evaluate: 'PIPELINE == "deploy-netbird-proxy"'
+  - event: deployment
+    evaluate: 'CI_PIPELINE_DEPLOY_TARGET == "deploy-netbird-proxy"'

 timeout: 30

@@ -9,8 +9,8 @@ when:
      - "ansible/roles/netbird-proxy-watchdog/**"
      - "ansible/plays/install-netbird-server.yml"
      - ".woodpecker/deploy-netbird-server.yml"
-  - event: manual
-    evaluate: 'PIPELINE == "deploy-netbird-server"'
+  - event: deployment
+    evaluate: 'CI_PIPELINE_DEPLOY_TARGET == "deploy-netbird-server"'

 timeout: 30

@@ -1,6 +1,6 @@
 when:
-  - event: manual
-    evaluate: 'PIPELINE == "e2e-test"'
+  - event: deployment
+    evaluate: 'CI_PIPELINE_DEPLOY_TARGET == "e2e-test"'

 steps:
  - name: e2e
@@ -7,7 +7,8 @@
 #                was harmless at daily/weekly cadence — but alert-monitor.yml
 #                fires every 15 minutes, so piggybacking must be opt-in now.
 #                A new cron that SHOULD also run e2e gets its name added here.
-#   - manual   : `woodpecker pipeline create --branch master --var PIPELINE=e2e k.renner/homelab`
+#   - deploy   : `woodpecker-cli pipeline deploy k.renner/homelab <n> e2e`, where
+#                <n> is an existing pipeline to promote.

 when:
  - event: cron
@@ -16,8 +17,8 @@ when:
    cron: update-audit
  - event: cron
    cron: weekly-update
-  - event: manual
-    evaluate: 'PIPELINE == "e2e"'
+  - event: deployment
+    evaluate: 'CI_PIPELINE_DEPLOY_TARGET == "e2e"'

 steps:
  - name: model-selection-tests
@@ -25,7 +26,7 @@ steps:
    # fetch-models.sh response mapping. No cluster, no secrets, no network — the
    # ci-claude image just provides sh + jq. Keeps the flag-injection regression
    # test from rotting (it exercises the exact injection shapes).
-    image: gitea.renner.uno/gitea_admin/ci-claude:2.1.218
+    image: gitea.renner.uno/gitea_admin/ci-claude:2.1.250
    commands:
      - sh scripts/ci/test-model-selection.sh

@@ -1,27 +0,0 @@
-when:
-  - event: manual
-    evaluate: 'PIPELINE == "install-garage-synology"'
-
-steps:
-  - name: run-playbook
-    image: gitea.renner.uno/gitea_admin/ci-ansible:2026-04-29
-    environment:
-      ANSIBLE_FORCE_COLOR: "true"
-      ANSIBLE_HOST_KEY_CHECKING: "false"
-      SSH_PRIVATE_KEY:
-        from_secret: ssh_private_key
-      VAULT_PASS:
-        from_secret: vault_pass
-      PROXMOX_TOKEN_ID:
-        from_secret: proxmox_token_id
-      PROXMOX_TOKEN_SECRET:
-        from_secret: proxmox_token_secret
-    commands:
-      - mkdir -p ~/.ssh
-      - echo "$SSH_PRIVATE_KEY" | base64 -d > ~/.ssh/id_ed25519
-      - chmod 600 ~/.ssh/id_ed25519
-      - 'printf "Host *\n\tStrictHostKeyChecking no\n\tUserKnownHostsFile /dev/null\n" > ~/.ssh/config'
-      - cd ansible
-      - echo "$$VAULT_PASS" > .vault_pass && chmod 600 .vault_pass
-      - export ANSIBLE_VAULT_PASSWORD_FILE=.vault_pass
-      - ansible-playbook -i inventory/ plays/install-garage-synology.yml -v
@@ -34,13 +34,13 @@
 #   - cron   : a cron NAMED exactly "issue-fix":
 #                woodpecker repo cron add --repo k.renner/homelab \
 #                  --name issue-fix --branch master --schedule '41 * * * *'
-#   - manual : woodpecker pipeline create --branch master \
-#                --var PIPELINE=issue-fix k.renner/homelab
+#   - deploy : woodpecker-cli pipeline deploy k.renner/homelab <n> issue-fix
+#              where <n> is an existing pipeline to promote.
 when:
  - event: cron
    cron: issue-fix
-  - event: manual
-    evaluate: 'PIPELINE == "issue-fix"'
+  - event: deployment
+    evaluate: 'CI_PIPELINE_DEPLOY_TARGET == "issue-fix"'

 steps:
  - name: fetch-diag
@@ -62,7 +62,7 @@ steps:
      - bash scripts/ci/make-diag-kubeconfig.sh

  - name: issue-fix-agent
-    image: gitea.renner.uno/gitea_admin/ci-claude:2.1.218
+    image: gitea.renner.uno/gitea_admin/ci-claude:2.1.250
    environment:
      CLAUDE_CODE_OAUTH_TOKEN:
        from_secret: claude_code_oauth_token
@@ -53,9 +53,9 @@
 #
 # Triggering: pull_request only — automatic on PR open + push-to-open-PR. To
 # re-review a PR, push a commit (the new head sha clears the dedup marker below
-# and earns a fresh review). There is deliberately no manual PIPELINE trigger:
-# Woodpecker exposes a --var only to YAML variable substitution and `when`
-# filters, NOT to a step's shell environment, so a --var PR=<n> re-review would
+# and earns a fresh review). There is deliberately no on-demand trigger for a
+# specific PR: Woodpecker exposes injected variables to YAML substitution and
+# `when` filters, NOT to a step's shell environment, so a PR=<n> re-review would
 # silently no-op (the step would find no PR number and exit green).
 # (Note: keep literal dollar-brace out of THIS file entirely, even in comments —
 # Woodpecker runs its variable substitution over the whole YAML text, comments
@@ -65,7 +65,7 @@ when:

 steps:
  - name: pr-review-agent
-    image: gitea.renner.uno/gitea_admin/ci-claude:2.1.218
+    image: gitea.renner.uno/gitea_admin/ci-claude:2.1.250
    environment:
      CLAUDE_CODE_OAUTH_TOKEN:
        from_secret: claude_code_oauth_token
@@ -1,8 +1,20 @@
+# Trivy scan of the IaC tree and every image referenced from ansible/, with an
+# agent pass that opens a PR for CRITICAL/HIGH findings.
+#
+# Triggers:
+#   - cron       : the named `daily-security-scan` cron, matched by NAME.
+#                  Crons cannot carry variables — `woodpecker-cli repo cron add`
+#                  has no --var — so a variable gate can never match a cron.
+#   - deployment : woodpecker-cli pipeline deploy k.renner/homelab <n> security-scan
+#                  The target rides in pipeline metadata as
+#                  CI_PIPELINE_DEPLOY_TARGET, which the workflow-root filter
+#                  does see, unlike manual-run variables on Woodpecker 3.18
+#                  (#582).
 when:
  - event: cron
-    evaluate: 'PIPELINE == "security-scan"'
-  - event: manual
-    evaluate: 'PIPELINE == "security-scan"'
+    cron: daily-security-scan
+  - event: deployment
+    evaluate: 'CI_PIPELINE_DEPLOY_TARGET == "security-scan"'

 steps:
  - name: iac-scan
@@ -28,12 +40,28 @@ steps:
        cat /tmp/images.txt
        echo "---"
        i=0
+        failed=0
+        failed_names=""
        while IFS= read -r img; do
          i=$$((i+1))
          out="trivy-image-$$i.json"
          echo "=== [$$i] $$img -> $$out ==="
-          trivy image --skip-db-update --scanners vuln --timeout 15m --severity CRITICAL,HIGH --ignore-unfixed --format json -o "$$out" "$$img" || true
+          # Keep going on a bad image so one unpullable reference cannot cost
+          # the scan of every image after it, but record that it happened.
+          if ! trivy image --skip-db-update --scanners vuln --timeout 15m --severity CRITICAL,HIGH --ignore-unfixed --format json -o "$$out" "$$img"; then
+            failed=$$((failed+1))
+            failed_names="$$failed_names $$img"
+          fi
        done < /tmp/images.txt
+        echo "--- scanned $$((i - failed)) of $$i images ---"
+        if [ "$$failed" -gt 0 ]; then
+          echo "NOT SCANNED:$$failed_names"
+          exit 1
+        fi
+    # Non-zero above turns this step red without failing the workflow, so the
+    # fix agent still runs on what was scanned. Coverage is reported, not
+    # enforced: an incomplete scan is visible in the step status instead of
+    # being indistinguishable from a clean one.
    failure: ignore

  - name: security-fix-agent
@@ -42,7 +70,7 @@ steps:
    # this step is skipped — otherwise we'd fork-bomb PRs.
    when:
      - branch: master
-    image: gitea.renner.uno/gitea_admin/ci-claude:2.1.218
+    image: gitea.renner.uno/gitea_admin/ci-claude:2.1.250
    environment:
      CLAUDE_CODE_OAUTH_TOKEN:
        from_secret: claude_code_oauth_token
@@ -10,14 +10,14 @@
 # report; the pipeline posts it to a single persistent Gitea issue.
 #
 # Triggering:
-#   - cron   : a cron NAMED exactly "update-audit". Unlike the other pipelines
-#              here (which gate on an injected `PIPELINE` var set at cron-create
-#              time in the UI), this uses Woodpecker's documented `cron:` name
-#              filter so the schedule can be created entirely from the CLI:
+#   - cron   : a cron NAMED exactly "update-audit". Crons carry no variables —
+#              `repo cron add` takes name, branch, schedule and enabled — so the
+#              name filter is the only thing that can select a workflow for a
+#              scheduled run:
 #                woodpecker repo cron add --repo k.renner/homelab \
 #                  --name update-audit --branch master --schedule '@weekly'
-#   - manual : woodpecker pipeline create --branch master \
-#                --var PIPELINE=update-audit k.renner/homelab
+#   - deploy : woodpecker-cli pipeline deploy k.renner/homelab <n> update-audit
+#              where <n> is an existing pipeline to promote.
 #
 # NOTE: e2e.yml runs on an explicit list of cron names that includes this one,
 # so a weekly e2e run piggybacks on the audit (it was a bare `event: cron`
@@ -25,12 +25,12 @@
 when:
  - event: cron
    cron: update-audit
-  - event: manual
-    evaluate: 'PIPELINE == "update-audit"'
+  - event: deployment
+    evaluate: 'CI_PIPELINE_DEPLOY_TARGET == "update-audit"'

 steps:
  - name: update-audit-agent
-    image: gitea.renner.uno/gitea_admin/ci-claude:2.1.218
+    image: gitea.renner.uno/gitea_admin/ci-claude:2.1.250
    environment:
      CLAUDE_CODE_OAUTH_TOKEN:
        from_secret: claude_code_oauth_token
@@ -1,37 +0,0 @@
---
-# PBS Client configuration for nas-1
-pbs_backup_paths:
-  - /volume1/Documents
-  - /volume1/homes
-  - /volume1/Homeassistant Backup
-  - /volume1/Games
-  - /volume1/Media
-  - /volume1/Music
-  - /volume1/video
-  - /volume2/Backup
-  - /volume1/Movies
-
-  # Add more paths as needed:
-  # - /volume1/photos
-  # - /volume1/music
-
-# PBS Server connection
-pbs_server_host: "pbs2.renner.uno"
-pbs_server_port: 8007
-pbs_datastore: "pool"
-pbs_backup_id: "nas-1"
-
-# PBS Authentication - credentials in vault.yml
-pbs_username: "root@pam!nas-1"
-
-# Garage S3 (K8s backup target)
-garage_image: "dxflrs/garage:v2.3.0"
-garage_zone: "dsm"
-garage_capacity: "2T"
-
-# SSH connection - use password auth (key not supported by DSM)
-ansible_ssh_pass: "{{ nas_ssh_password }}"
-ansible_become_pass: "{{ nas_ssh_password }}"
-
-# Python 3.9+ from Synology package
-ansible_python_interpreter: /usr/local/bin/python3.9
@@ -1,27 +0,0 @@
-$ANSIBLE_VAULT;1.1;AES256
-34663462636437633437613863366266306334666635643839313737343739643864613136613938
-3138393966306561656366396465383539303137333036300a376237376636356230343834386362
-36636535396330333732383233323263613132333166343739396137636538653435336662353138
-6565643866623235610a316266383933303830323936303735623338623165386339383733373435
-62366461363833616438373237383132366438326364363462333265366533323861376630643365
-39343036343838333639363432643738666630363063323636646661313539643465366532363438
-33303837623234613434633563666562346536346435353461373536323737376233386163326537
-61383963343737656438356136613537623538333163343466343739346135333439616432663763
-36663962633037376561326434303035333938646436663832303432346365353439666435613337
-34363636326530333233313231343566306432376532396666643761633136316333376337666135
-65363338623035663438323338663863366362653131336434323865326530326534623631336263
-36633063383031386161363131333636393364623436613331353733313235383062656131313164
-63393665633361313961363637663237616364643236383835393736643937393564656238376362
-31393465383361326264376133393233616264663636383337363962356532613438663637616536
-33653137656335323763313461323633616635346232303062323062333766383931313965346361
-66656461313239633366636463633465636463663937393932636337643861383937663662306466
-32353166643832303234643264633062616330393963333034623432613730366339306637613239
-34626161663666316339323762373639353335653663353635366664643063393432623039306237
-38363161343930363763393364663364353735343236313665313461626165636135303839363164
-37336638396564326166376233353730346563656266323535666265323062646232323938353732
-32636235333839623166633761376334316434613235333730353439343262393537363461333238
-32653435623362666662336532643832356163326332636436346132643237643030343761663332
-36663530356539303636663438646430363335353135323932613863666264363533326137353164
-31663032346236616263343637396439663334396166656364623637666535386530383535663435
-66303037303265616634373763616437333835333136336563323339666563663931396133633131
-3963653266633535303630653335666166313336653831623362
@@ -8,6 +8,8 @@
 #   pve_cluster (jupiter/neptune/saturn)  run Talos on bare metal; no SSH at all
 #   authentik_db / authentik_app          authentik runs in-cluster (CNPG)
 #   grafana                               runs in-cluster
+#   synology_nas (nas-1)                  powered off; Garage and the PBS client
+#                                         it hosted are gone with it
 # Their hosts no longer resolve, except the three that resolve to Talos nodes.

 [netbird_server]
@@ -17,10 +19,6 @@ netbird.renner.uno ansible_user=root
 proxy-1.renner.uno ansible_user=root
 proxy-2.renner.uno ansible_user=root

-
-[synology_nas]
-nas-1.renner.uno ansible_user=ladmin ansible_python_interpreter=/usr/bin/python3
-
 # Every bare-metal edge thin client. Gets the host-generic roles only:
 # flash-wear handling, the log shipper, the MQTT bridge, the VLAN
 # sub-interface. Nothing here assumes any peripheral is attached.
@@ -1,313 +0,0 @@
---
-# Synology-specific playbook using raw module (Python 3.8 workaround)
-# Deploys Garage (https://garagehq.deuxfleurs.fr) as a single-node S3 target
-# for K8s backups (Velero + CNPG Barman Cloud Plugin).
-#
-# Required secrets in host_vars/nas-1.renner.uno/vault.yml:
-#   garage_rpc_secret:     "<openssl rand -hex 32>"
-#   garage_admin_token:    "<openssl rand -base64 32>"
-#   garage_metrics_token:  "<openssl rand -base64 32>"
-#
-# Post-install bootstrap (run once, record the returned secret keys):
-#   docker exec garaged /garage status
-#   docker exec garaged /garage bucket create k8s-velero
-#   docker exec garaged /garage bucket create k8s-cnpg
-#   docker exec garaged /garage bucket create k8s-secrets
-#   docker exec garaged /garage bucket create k8s-migration
-#   docker exec garaged /garage key create velero-key
-#   docker exec garaged /garage key create cnpg-key
-#   docker exec garaged /garage key create secrets-key
-#   docker exec garaged /garage key create migration-key
-#   docker exec garaged /garage bucket allow --read --write --owner k8s-velero    --key velero-key
-#   docker exec garaged /garage bucket allow --read --write --owner k8s-cnpg      --key cnpg-key
-#   docker exec garaged /garage bucket allow --read --write --owner k8s-secrets   --key secrets-key
-#   docker exec garaged /garage bucket allow --read --write --owner k8s-migration --key migration-key
- name: Install Garage S3 on Synology NAS
-  hosts: synology_nas
-  gather_facts: false
-
-  vars:
-    garage_data_dir: "/volume1/docker/garage"
-
-  tasks:
-    - name: Create Garage directory tree
-      ansible.builtin.raw: |
-        mkdir -p {{ garage_data_dir }}/config \
-                 {{ garage_data_dir }}/meta \
-                 {{ garage_data_dir }}/data
-      changed_when: true
-
-    # Secret writes use the same compare-then-write pattern as garage.toml so
-    # rotation is idempotent AND a real change can drive force-recreate below.
-    # Garage reads these files once at startup; without container restart, a
-    # rotated token leaves the running process holding the previous value.
-    - name: Write rpc_secret
-      ansible.builtin.raw: |
-        cat > {{ garage_data_dir }}/config/rpc_secret.new << 'SECRET_EOF'
-        {{ garage_rpc_secret }}
-        SECRET_EOF
-        chmod 600 {{ garage_data_dir }}/config/rpc_secret.new
-        if [ ! -f {{ garage_data_dir }}/config/rpc_secret ] \
-        || ! cmp -s {{ garage_data_dir }}/config/rpc_secret.new {{ garage_data_dir }}/config/rpc_secret; then
-          mv {{ garage_data_dir }}/config/rpc_secret.new {{ garage_data_dir }}/config/rpc_secret
-          echo RPC_SECRET_CHANGED
-        else
-          rm {{ garage_data_dir }}/config/rpc_secret.new
-        fi
-      register: rpc_secret_write
-      changed_when: "'RPC_SECRET_CHANGED' in rpc_secret_write.stdout"
-      no_log: true
-
-    - name: Write admin_token
-      ansible.builtin.raw: |
-        cat > {{ garage_data_dir }}/config/admin_token.new << 'SECRET_EOF'
-        {{ garage_admin_token }}
-        SECRET_EOF
-        chmod 600 {{ garage_data_dir }}/config/admin_token.new
-        if [ ! -f {{ garage_data_dir }}/config/admin_token ] \
-        || ! cmp -s {{ garage_data_dir }}/config/admin_token.new {{ garage_data_dir }}/config/admin_token; then
-          mv {{ garage_data_dir }}/config/admin_token.new {{ garage_data_dir }}/config/admin_token
-          echo ADMIN_TOKEN_CHANGED
-        else
-          rm {{ garage_data_dir }}/config/admin_token.new
-        fi
-      register: admin_token_write
-      changed_when: "'ADMIN_TOKEN_CHANGED' in admin_token_write.stdout"
-      no_log: true
-
-    - name: Write metrics_token
-      ansible.builtin.raw: |
-        cat > {{ garage_data_dir }}/config/metrics_token.new << 'SECRET_EOF'
-        {{ garage_metrics_token }}
-        SECRET_EOF
-        chmod 600 {{ garage_data_dir }}/config/metrics_token.new
-        if [ ! -f {{ garage_data_dir }}/config/metrics_token ] \
-        || ! cmp -s {{ garage_data_dir }}/config/metrics_token.new {{ garage_data_dir }}/config/metrics_token; then
-          mv {{ garage_data_dir }}/config/metrics_token.new {{ garage_data_dir }}/config/metrics_token
-          echo METRICS_TOKEN_CHANGED
-        else
-          rm {{ garage_data_dir }}/config/metrics_token.new
-        fi
-      register: metrics_token_write
-      changed_when: "'METRICS_TOKEN_CHANGED' in metrics_token_write.stdout"
-      no_log: true
-
-    - name: Write garage.toml
-      ansible.builtin.raw: |
-        cat > {{ garage_data_dir }}/config/garage.toml.new << 'TOML_EOF'
-        metadata_dir = "/var/lib/garage/meta"
-        data_dir     = "/var/lib/garage/data"
-
-        # SQLite chosen over LMDB: single-node deployment has no peers to
-        # rebuild metadata from on unclean-shutdown corruption. SQLite is
-        # slower but portable and has no LMDB corruption window.
-        db_engine = "sqlite"
-
-        # 6-hour auto-snapshot of the metadata DB as a backstop against
-        # corruption; last two snapshots retained.
-        metadata_auto_snapshot_interval = "6h"
-
-        # Single-zone, single-node: only coherent replication factor.
-        replication_factor = 1
-
-        rpc_bind_addr    = "[::]:3901"
-        rpc_secret_file  = "/etc/garage/rpc_secret"
-
-        compression_level = 2
-
-        # 64 MB blocks (default 1 MB; previously 20 MB). On the 5 × 7 TB
-        # Btrfs RAID 5 volume the per-block fixed cost (SQLite lookup,
-        # dir traversal, hash verify, zstd decompress, nginx buffering)
-        # is the dominant overhead per object; larger blocks amortize
-        # it. block_size is a maximum, so 16 MiB CNPG WAL segments
-        # still upload as one block each. Only applies to NEW uploads;
-        # existing objects keep their original chunking until re-uploaded.
-        block_size = "64M"
-
-        [s3_api]
-        api_bind_addr = "[::]:3900"
-        s3_region     = "garage"
-        root_domain   = ".s3.{{ inventory_hostname }}"
-
-        [s3_web]
-        bind_addr   = "[::]:3902"
-        root_domain = ".web.{{ inventory_hostname }}"
-
-        [admin]
-        api_bind_addr      = "[::]:3903"
-        admin_token_file   = "/etc/garage/admin_token"
-        metrics_token_file = "/etc/garage/metrics_token"
-        TOML_EOF
-        if [ ! -f {{ garage_data_dir }}/config/garage.toml ] \
-        || ! cmp -s {{ garage_data_dir }}/config/garage.toml.new {{ garage_data_dir }}/config/garage.toml; then
-          mv {{ garage_data_dir }}/config/garage.toml.new {{ garage_data_dir }}/config/garage.toml
-          echo GARAGE_TOML_CHANGED
-        else
-          rm {{ garage_data_dir }}/config/garage.toml.new
-        fi
-      register: garage_toml_write
-      changed_when: "'GARAGE_TOML_CHANGED' in garage_toml_write.stdout"
-
-    - name: Write docker-compose.yml
-      ansible.builtin.raw: |
-        cat > {{ garage_data_dir }}/docker-compose.yml << 'COMPOSE_EOF'
-        services:
-          garage:
-            image: {{ garage_image }}
-            container_name: garaged
-            restart: unless-stopped
-            # HTTP services (3900/3902/3903) bind to loopback; DSM
-            # reverse proxy fronts and TLS-terminates them. RPC 3901
-            # is exposed directly — the Noise handshake is raw TCP,
-            # so DSM RP cannot front it. rpc_secret gates auth.
-            ports:
-              - "3901:3901"
-              - "127.0.0.1:3900:3900"
-              - "127.0.0.1:3902:3902"
-              - "127.0.0.1:3903:3903"
-            volumes:
-              - {{ garage_data_dir }}/config/garage.toml:/etc/garage.toml:ro
-              - {{ garage_data_dir }}/config/rpc_secret:/etc/garage/rpc_secret:ro
-              - {{ garage_data_dir }}/config/admin_token:/etc/garage/admin_token:ro
-              - {{ garage_data_dir }}/config/metrics_token:/etc/garage/metrics_token:ro
-              - {{ garage_data_dir }}/meta:/var/lib/garage/meta
-              - {{ garage_data_dir }}/data:/var/lib/garage/data
-        COMPOSE_EOF
-      changed_when: true
-
-    - name: Pull image and start Garage container
-      ansible.builtin.shell: |
-        export PATH=$PATH:/usr/local/bin
-        cd {{ garage_data_dir }} && docker compose pull && docker compose up -d
-      become: true
-      changed_when: true
-
-    # Garage does not reload config on SIGHUP and compose does not notice
-    # when a bind-mounted host file changes. Force-recreate the container
-    # when garage.toml OR any of the three secret files changed so the new
-    # config / rotated tokens are picked up.
-    - name: Force-recreate garaged when garage.toml or secrets changed
-      ansible.builtin.shell: |
-        export PATH=$PATH:/usr/local/bin
-        cd {{ garage_data_dir }} && docker compose up -d --force-recreate garage
-      become: true
-      when: garage_toml_write.changed
-            or rpc_secret_write.changed
-            or admin_token_write.changed
-            or metrics_token_write.changed
-      changed_when: true
-
-    - name: Wait for Garage to accept CLI calls
-      ansible.builtin.shell: |
-        export PATH=$PATH:/usr/local/bin
-        for i in $(seq 1 30); do
-          if docker exec garaged /garage status >/dev/null 2>&1; then
-            exit 0
-          fi
-          sleep 2
-        done
-        exit 1
-      become: true
-      changed_when: false
-
-    - name: Check whether cluster layout is already applied
-      ansible.builtin.shell: |
-        export PATH=$PATH:/usr/local/bin
-        docker exec garaged /garage status
-      become: true
-      register: garage_status
-      changed_when: false
-
-    - name: Apply single-node layout (idempotent — only on first run)
-      when: "'NO ROLE ASSIGNED' in garage_status.stdout"
-      ansible.builtin.shell: |
-        export PATH=$PATH:/usr/local/bin
-        NODE_ID=$(docker exec garaged /garage node id | head -n 1 | cut -d@ -f1)
-        docker exec garaged /garage layout assign "$NODE_ID" \
-          -z {{ garage_zone }} \
-          -c {{ garage_capacity }} \
-          -t {{ inventory_hostname_short }}
-        docker exec garaged /garage layout apply --version 1
-      become: true
-      changed_when: true
-
-    - name: Report Garage status
-      ansible.builtin.shell: |
-        export PATH=$PATH:/usr/local/bin
-        docker exec garaged /garage status
-      become: true
-      register: garage_status_final
-      changed_when: false
-
-    - name: Show Garage status
-      ansible.builtin.debug:
-        var: garage_status_final.stdout_lines
-
-    # Bootstrap buckets + keys. Idempotent: bucket_info / key_info return
-    # non-zero when missing, so we only create on first run. Access-key
-    # secrets are captured at create time and persisted to chmod-600 files
-    # under {{ garage_data_dir }}/config/keys/<key>.creds on nas-1. These
-    # files are the only post-install record of the secrets — Garage does
-    # not expose them again.
-    - name: Bootstrap Garage buckets, keys, and grants
-      ansible.builtin.shell: |
-        set -e
-        export PATH=$PATH:/usr/local/bin
-        KEYS_DIR={{ garage_data_dir }}/config/keys
-        mkdir -p "$KEYS_DIR"
-        chmod 700 "$KEYS_DIR"
-
-        bootstrap_pair() {
-          local BUCKET="$1"
-          local KEY="$2"
-          local CREDS_FILE="$KEYS_DIR/$KEY.creds"
-
-          if ! docker exec garaged /garage bucket info "$BUCKET" >/dev/null 2>&1; then
-            docker exec garaged /garage bucket create "$BUCKET"
-          fi
-
-          if ! docker exec garaged /garage key info "$KEY" >/dev/null 2>&1; then
-            CREATE_OUT=$(docker exec garaged /garage key create "$KEY")
-            KEY_ID=$(echo "$CREATE_OUT"   | awk '/^Key ID:/     {print $3}')
-            SECRET=$(echo "$CREATE_OUT"   | awk '/^Secret key:/ {print $3}')
-            umask 177
-            printf 'KEY_ID=%s\nSECRET_KEY=%s\n' "$KEY_ID" "$SECRET" > "$CREDS_FILE"
-          fi
-
-          docker exec garaged /garage bucket allow \
-            --read --write --owner \
-            "$BUCKET" --key "$KEY"
-        }
-
-        bootstrap_pair k8s-velero    velero-key
-        bootstrap_pair k8s-cnpg      cnpg-key
-        bootstrap_pair k8s-secrets   secrets-key
-        bootstrap_pair k8s-migration migration-key
-        bootstrap_pair tfstate       tfstate-key
-      become: true
-      changed_when: true
-      no_log: true
-
-    - name: Report bucket + key state (no secrets)
-      ansible.builtin.shell: |
-        export PATH=$PATH:/usr/local/bin
-        docker exec garaged /garage bucket list
-        echo "---"
-        docker exec garaged /garage key list
-        echo "---"
-        ls -l {{ garage_data_dir }}/config/keys/ 2>&1
-      become: true
-      register: garage_bootstrap_state
-      changed_when: false
-
-    - name: Show bucket + key state
-      ansible.builtin.debug:
-        var: garage_bootstrap_state.stdout_lines
-
-    - name: Post-install note
-      ansible.builtin.debug:
-        msg:
-          - "Buckets: k8s-velero, k8s-cnpg, k8s-secrets, k8s-migration, tfstate"
-          - "Keys:    velero-key, cnpg-key, secrets-key, migration-key, tfstate-key"
-          - "Secrets are written to {{ garage_data_dir }}/config/keys/<key>.creds on nas-1 (chmod 600, root-owned)."
-          - "SSH to nas-1 and `sudo cat` the file to retrieve KEY_ID + SECRET_KEY for Velero / CNPG / migration / tfstate config."
@@ -1,104 +0,0 @@
---
-# Synology-specific playbook using raw module (Python 3.8 workaround)
- name: Install PBS Client on Synology NAS
-  hosts: synology_nas
-  gather_facts: false
-
-  vars:
-    pbs_client_data_dir: "/volume1/docker/pbs-client"
-
-  tasks:
-    - name: Create PBS client directory
-      ansible.builtin.raw: |
-        mkdir -p {{ pbs_client_data_dir }}/state
-      changed_when: true
-
-    - name: Create docker-compose.yml
-      ansible.builtin.raw: |
-        cat > {{ pbs_client_data_dir }}/docker-compose.yml << 'COMPOSE_EOF'
-        services:
-          pbs-client:
-            image: proxmox/proxmox-backup-client:latest
-            container_name: pbs-client
-            restart: unless-stopped
-            hostname: {{ pbs_backup_id }}
-            env_file:
-              - .env
-            volumes:
-              - {{ pbs_client_data_dir }}/state:/root/.proxmox-backup
-        {% for path in pbs_backup_paths %}
-              - "{{ path }}:{{ path }}:ro"
-        {% endfor %}
-            mem_limit: 2g
-            command: ["sleep", "infinity"]
-        COMPOSE_EOF
-      changed_when: true
-
-    - name: Create .env file
-      ansible.builtin.raw: |
-        cat > {{ pbs_client_data_dir }}/.env << 'ENV_EOF'
-        PBS_REPOSITORY={{ pbs_username }}@{{ pbs_server_host }}:{{ pbs_server_port }}:{{ pbs_datastore }}
-        PBS_PASSWORD={{ pbs_password }}
-        ENV_EOF
-        chmod 600 {{ pbs_client_data_dir }}/.env
-      changed_when: true
-
-    - name: Create backup script
-      ansible.builtin.raw: |
-        cat > {{ pbs_client_data_dir }}/backup.sh << 'SCRIPT_EOF'
-        #!/bin/bash
-        set -e
-        source {{ pbs_client_data_dir }}/.env
-
-        BACKUP_SOURCES=""
-        {% for path in pbs_backup_paths %}
-        BACKUP_SOURCES="$BACKUP_SOURCES {{ path | basename }}.pxar:{{ path }}"
-        {% endfor %}
-
-        echo "[$(date '+%Y-%m-%d %H:%M:%S')] Starting backup for {{ pbs_backup_id }}"
-        docker exec pbs-client proxmox-backup-client backup \
-            $BACKUP_SOURCES \
-            --backup-id {{ pbs_backup_id }} \
-            --repository "${PBS_REPOSITORY}"
-
-        echo "[$(date '+%Y-%m-%d %H:%M:%S')] Backup completed, pruning..."
-        docker exec pbs-client proxmox-backup-client prune \
-            --repository "${PBS_REPOSITORY}" \
-            --backup-id {{ pbs_backup_id }} \
-            --keep-last {{ pbs_keep_last | default(3) }} \
-            --keep-daily {{ pbs_keep_daily | default(7) }} \
-            --keep-weekly {{ pbs_keep_weekly | default(4) }} \
-            --keep-monthly {{ pbs_keep_monthly | default(6) }}
-
-        echo "[$(date '+%Y-%m-%d %H:%M:%S')] Done"
-        SCRIPT_EOF
-        chmod 755 {{ pbs_client_data_dir }}/backup.sh
-      changed_when: true
-
-    - name: Start PBS client container
-      ansible.builtin.shell: |
-        export PATH=$PATH:/usr/local/bin
-        cd {{ pbs_client_data_dir }} && docker compose pull && docker compose up -d
-      become: true
-      changed_when: true
-
-    - name: Setup cron job for daily backup at 2 AM (root crontab)
-      ansible.builtin.shell: |
-        # Remove existing entry if present
-        crontab -l 2>/dev/null | grep -v "pbs-client/backup.sh" | crontab - 2>/dev/null || true
-        # Add new entry
-        (crontab -l 2>/dev/null; echo "0 2 * * * {{ pbs_client_data_dir }}/backup.sh >> /var/log/pbs-backup.log 2>&1") | crontab -
-      become: true
-      changed_when: true
-
-    - name: Verify container is running
-      ansible.builtin.shell: |
-        export PATH=$PATH:/usr/local/bin
-        docker ps --filter name=pbs-client --format "{{ '{{' }}.Status{{ '}}' }}"
-      become: true
-      register: container_status
-      changed_when: false
-
-    - name: Show container status
-      ansible.builtin.debug:
-        msg: "PBS client container status: {{ container_status.stdout }}"
@@ -1,11 +0,0 @@
---
- name: Install PBS Client on Synology NAS
-  hosts: synology_nas
-  become: true
-  # Variables are set in:
-  # - Role defaults: ansible/roles/pbs-client/defaults/main.yml
-  # - Host overrides: ansible/inventory/host_vars/<hostname>/vars.yml
-  # - Secrets: ansible/inventory/host_vars/<hostname>/vault.yml
-
-  roles:
-    - pbs-client
@@ -1,32 +0,0 @@
---
-# PBS Client configuration
-pbs_client_version: "latest"
-pbs_client_data_dir: "/opt/pbs-client"
-
-# PBS Server connection (override in host_vars)
-pbs_server_host: "pbs.obg.renner.uno"
-pbs_server_port: 8007
-pbs_datastore: "backups"
-
-# Authentication (override in vault!)
-pbs_username: "backup@pbs"
-pbs_password: ""
-# pbs_fingerprint: ""  # Optional - omit for Let's Encrypt certs
-
-# Backup configuration
-pbs_backup_id: "nas-1"
-pbs_backup_paths:
-  - /volume1/docker
-  - /volume1/homes
-
-# Schedule (cron format)
-pbs_backup_schedule: "0 2 * * *"  # 2 AM daily
-
-# Retention policy (prune settings)
-pbs_keep_last: 3
-pbs_keep_daily: 7
-pbs_keep_weekly: 4
-pbs_keep_monthly: 6
-
-# Container resource limits
-pbs_memory_limit: "2g"
@@ -1,6 +0,0 @@
---
- name: Restart PBS client
-  community.docker.docker_compose_v2:
-    project_src: "{{ pbs_client_data_dir }}"
-    state: restarted
-    docker_cli: "{{ docker_cli | default('/usr/local/bin/docker') }}"
@@ -1,23 +0,0 @@
---
- name: Create PBS client directories
-  ansible.builtin.file:
-    path: "{{ item }}"
-    state: directory
-    mode: '0755'
-  loop:
-    - "{{ pbs_client_data_dir }}"
-    - "{{ pbs_client_data_dir }}/state"
-
- name: Copy PBS client docker-compose file
-  ansible.builtin.template:
-    src: docker-compose.yml.j2
-    dest: "{{ pbs_client_data_dir }}/docker-compose.yml"
-    mode: '0644'
-  notify: Restart PBS client
-
- name: Start PBS client via Docker Compose
-  community.docker.docker_compose_v2:
-    project_src: "{{ pbs_client_data_dir }}"
-    state: present
-    pull: always
-    docker_cli: "{{ docker_cli | default('/usr/local/bin/docker') }}"
@@ -1,6 +0,0 @@
-# PBS Client Environment Configuration
-PBS_REPOSITORY={{ pbs_username }}@{{ pbs_server_host }}:{{ pbs_server_port }}:{{ pbs_datastore }}
-PBS_PASSWORD={{ pbs_password }}
-{% if pbs_fingerprint | default('') != '' %}
-PBS_FINGERPRINT={{ pbs_fingerprint }}
-{% endif %}
@@ -1,36 +0,0 @@
-#!/bin/bash
-# PBS Backup Script for {{ pbs_backup_id }}
-# Managed by Ansible - do not edit manually
-
-set -e
-
-# Load environment
-source {{ pbs_client_data_dir }}/.env
-
-# Build backup command with all paths
-BACKUP_SOURCES=""
-{% for path in pbs_backup_paths %}
-BACKUP_SOURCES="$BACKUP_SOURCES {{ path | basename }}.pxar:{{ path }}"
-{% endfor %}
-
-echo "[$(date '+%Y-%m-%d %H:%M:%S')] Starting backup for {{ pbs_backup_id }}"
-
-# Run backup via Docker
-docker exec pbs-client proxmox-backup-client backup \
-    $BACKUP_SOURCES \
-    --backup-id {{ pbs_backup_id }} \
-    --repository "${PBS_REPOSITORY}"
-
-echo "[$(date '+%Y-%m-%d %H:%M:%S')] Backup completed"
-
-# Prune old backups
-echo "[$(date '+%Y-%m-%d %H:%M:%S')] Pruning old backups"
-docker exec pbs-client proxmox-backup-client prune \
-    --repository "${PBS_REPOSITORY}" \
-    --backup-id {{ pbs_backup_id }} \
-    --keep-last {{ pbs_keep_last }} \
-    --keep-daily {{ pbs_keep_daily }} \
-    --keep-weekly {{ pbs_keep_weekly }} \
-    --keep-monthly {{ pbs_keep_monthly }}
-
-echo "[$(date '+%Y-%m-%d %H:%M:%S')] Prune completed"
@@ -1,30 +0,0 @@
-services:
-  pbs-client:
-    image: aterfax/pbs-client:{{ pbs_client_version }}
-    container_name: pbs-client
-    restart: unless-stopped
-    hostname: {{ pbs_backup_id }}
-    environment:
-      - PBS_ENDPOINT={{ pbs_server_host }}:{{ pbs_server_port }}
-      - PBS_DATASTORE={{ pbs_datastore }}
-      - PBS_API_KEY_NAME={{ pbs_username }}
-      - PBS_API_KEY_SECRET={{ pbs_password }}
-      - PBS_PASSWORD={{ pbs_password }}
-      - PBS_ENCRYPTION_PASSWORD={{ pbs_encryption_password | default(pbs_password) }}
-      - PBS_REPOSITORY={{ pbs_username }}@{{ pbs_server_host }}:{{ pbs_server_port }}:{{ pbs_datastore }}
-      - PBS_BACKUP_ID={{ pbs_backup_id }}
-      - CRON_SCHEDULE={{ pbs_backup_schedule }}
-      - PBS_BACKUP_CMD_APPEND_EXTRA_OPTS=--crypt-mode=none
-      - PRUNE_KEEP_LAST={{ pbs_keep_last | default(3) }}
-      - PRUNE_KEEP_DAILY={{ pbs_keep_daily | default(7) }}
-      - PRUNE_KEEP_WEEKLY={{ pbs_keep_weekly | default(4) }}
-      - PRUNE_KEEP_MONTHLY={{ pbs_keep_monthly | default(6) }}
-      - CRON_BACKUP_ONLY=1
-    volumes:
-      - {{ pbs_client_data_dir }}/state:/root/.config/proxmox-backup
-{% for path in pbs_backup_paths %}
-      - "{{ path }}:/backups/{{ path | basename | replace(' ', '_') }}:ro"
-{% endfor %}
-    tmpfs:
-      - /tmp
-    mem_limit: {{ pbs_memory_limit }}
@@ -0,0 +1,194 @@
+# Proposal — separate the four traffic classes onto their own VLANs
+
+Status: draft. The question this started with is **answered** — from the Cilium
+source and flag reference, not from a test — and the answer changes the shape
+of the proposal rather than confirming it.
+
+Supersedes the framing in issue #576, which described this as "give node
+management its own NIC, and Ceph public its own VLAN". That was two of four
+classes and one of them turned out already solved.
+
+## The four classes
+
+| class | what it is | where it goes today |
+|---|---|---|
+| **Ceph replication** | OSD-to-OSD heartbeat, replication, recovery | VLAN 49, its own X710 port — **separated** |
+| **cluster-internal** | pod-to-pod east-west, including Ceph client I/O | pod network, VXLAN over `mgmt0` |
+| **cluster-external** | ingress to LoadBalancer VIPs, egress to LAN and internet | `mgmt0` |
+| **management** | Talos API, etcd, kube-apiserver, kubelet | `mgmt0` |
+
+Three of four share one interface. That is not a design decision — until the
+bare-metal conversion there was one NIC to work with.
+
+Ceph client I/O living on the pod network is correct rather than a leftover:
+that traffic *is* cluster-internal. Ceph is done.
+
+## Principle
+
+**Each class gets its own VLAN. Which physical interface a VLAN lands on is a
+separate, changeable decision.**
+
+Defining classes by VLAN means the separation survives recabling, port failures
+and capacity changes, and it does not require one port per class. Defining them
+by interface would freeze a capacity decision into the architecture.
+
+## The finding that shapes everything else
+
+The original open question was whether `nodePort.directRoutingDevice` moves the
+next-hop of Cilium's direct routes, or only selects an interface. It is
+answerable from the source, and the answer is: **only the interface.**
+
+`installDirectRoute` takes the next-hop as a parameter:
+
+```go
+func installDirectRoute(log *slog.Logger, prefix netip.Prefix, nodeIP net.IP,
+    skipUnreachable bool) (routeSpec *netlink.Route, err error)
+```
+
+and `nodeUpdate` supplies it as `newNode.GetNodeIP(false)`. `GetNodeIP` returns,
+in priority order, `NodeInternalIP` → `NodeExternalIP` → anything else. The
+same `newIP4` is what tunnel mode uses as the VXLAN endpoint.
+
+`NodeInternalIP` comes from the Kubernetes Node object. `--ipv4-node` looks like
+an override but is not one: `initFromConfig()` calls `SetNodeInternalIP` and
+`initFromK8s()` runs **after** it and overwrites the value. In a Kubernetes
+cluster there is no path by which Cilium's node IP differs from the kubelet's
+`InternalIP`.
+
+`--direct-routing-device` is documented as "Device name used to connect nodes in
+direct routing mode" — a device, not an address.
+
+**So cluster-internal traffic is welded to the node IP, and the node IP is the
+kubelet InternalIP.** Two consequences:
+
+- The class cannot be moved off whatever VLAN the node IP lives on.
+- **Routing mode is irrelevant to this problem.** Tunnel mode sources the VXLAN
+  from the node IP; native mode uses it as the direct-route next-hop. Native
+  routing buys nothing here, so the disruptive, non-rolling step this proposal
+  previously contained is simply gone.
+
+## Consequence: draw the line the other way
+
+If cluster-internal cannot leave the node IP, then separation has to come from
+moving *management services* off it — and each one has to be checked
+individually, because they do not share a mechanism.
+
+| management service | can it leave the node IP? | lever |
+|---|---|---|
+| etcd | **yes** | `cluster.etcd.advertisedSubnets` (+ `listenSubnets`, which defaults to it) |
+| kube-apiserver endpoint | **yes** | already a VIP — `Layer2VIPConfig` with a `link:` field |
+| Talos API | **n/a** | `apid` answers on every node address (measured); a client and firewall choice, not a bind setting |
+| kubelet | **no** | it *is* the node IP, by definition |
+
+So four VLANs are reachable, but the boundary does not fall where the class
+names suggest: **kubelet stays with cluster-internal.** That is the honest
+result, and it is worth stating plainly rather than filing kubelet under
+management and hoping.
+
+The remaining classes keep the levers established earlier:
+
+- **cluster-external ingress** — `CiliumBGPNodeConfigOverride.spec.bgpInstances[].peers[].localAddress`.
+  For eBGP the session source is the next-hop, so pinning the session pins
+  where return traffic arrives. The session to the UDM has been running for
+  months.
+- **cluster-external egress** — eBPF masquerading follows the output device, so
+  this is a default-route decision plus `enable-masquerade-to-route-source`
+  (today `false`).
+- **Ceph replication** — Multus macvlan on VLAN 49, done.
+
+## The general escape hatch
+
+Ceph is separated because its OSDs got a second interface and stopped using the
+pod network for replication. That is the *only* mechanism that fully detaches a
+workload from the node IP, and it generalises: anything that must not ride the
+node IP gets its own `NetworkAttachmentDefinition`.
+
+It is also expensive per workload — an attachment, an IPAM pool, a pod spec
+change. Worth it for Ceph replication. Not worth it for east-west traffic in
+general.
+
+## Recommended mapping
+
+Two ways to arrange this, and they differ only in which VLAN gets relabelled:
+
+**A — move the node IP to a new cluster VLAN.** VLAN 40 keeps etcd, the API VIP
+and Talos API. Cleanest match to the class names, but it changes every node's
+identity, which is the one address the whole cluster is administered through.
+
+**B (recommended) — leave the node IP on VLAN 40 and move management off it.**
+VLAN 40 becomes the cluster VLAN; a new VLAN carries etcd and the API VIP.
+Identical end state, and no node ever changes its InternalIP.
+
+Under B:
+
+| VLAN | carries |
+|---|---|
+| 49 | Ceph replication |
+| 40 (relabelled *cluster*) | pod east-west, kubelet |
+| new *management* | etcd, kube-apiserver VIP, Talos API by convention |
+| new *external* | LoadBalancer ingress, egress default route |
+
+The property the user asked for — management carries only management traffic —
+holds under B. The label moves; the property is what matters.
+
+## Migration shape
+
+Every step is rolling and reversible. The routing-mode change is gone.
+
+1. **New VLANs** on the switch, trunked to the X710. Nothing uses them.
+2. **Addresses** on the new VLANs via Talos, one node at a time, `--mode=try`.
+   Still unused; this only proves the L2 works.
+3. **etcd** to the management VLAN via `advertisedSubnets`. One node at a time,
+   waiting for a healthy quorum between each.
+4. **API VIP** to the management VLAN via `Layer2VIPConfig.link`. DNS for
+   `k8s.renner.uno` follows.
+5. **cluster-external**: BGP `localAddress`, default route, masquerade flag.
+   Reversible by reverting the override; failure is visible immediately in
+   `cilium-dbg shell -- bgp/peers`.
+6. Verify VLAN 40 by what is *absent* from it, not by what still works.
+
+Step 3 is the one that deserves care — etcd is the only step where a mistake
+costs quorum rather than connectivity.
+
+## What this does not buy
+
+Management currently shares a 10 Gb link and is not contended. Nothing observed
+today is slow because of this. The case for the split is that traffic classes
+with different failure modes and security postures should not be
+indistinguishable — not that something is broken.
+
+## Sources and measurements
+
+Source, Cilium v1.20.1 (the running version):
+
+- `pkg/datapath/linux/node.go` — `installDirectRoute(…, nodeIP net.IP, …)`,
+  fed from `newIP4 = newNode.GetNodeIP(false)`; `createDirectRouteSpec` rejects
+  a next-hop that is not directly reachable.
+- `pkg/node/types/node.go` — `GetNodeIP` prefers `NodeInternalIP`.
+- `pkg/node/sync/local_node_sync.go` — `initFromConfig()` applies
+  `--ipv4-node`, `initFromK8s()` runs afterwards and overwrites it from the
+  Kubernetes Node.
+- `cilium-agent` flag reference — `--direct-routing-device`: "Device name used
+  to connect nodes in direct routing mode".
+
+Talos:
+
+- Multihoming guide — `cluster.etcd.advertisedSubnets`; `listenSubnets`
+  defaults to it. kube-apiserver and Talos API listen addresses are not
+  covered there.
+- `kubernetes/talos/patches/k8s-{1,2,3}.yaml` — `Layer2VIPConfig` for
+  `10.2.40.60` with `link: mgmt0`.
+
+Measured on the cluster:
+
+- `apid` answered on a node address that is not the InternalIP, so the Talos
+  API is not bound to one address.
+- k8s-1 currently holds one routable v4 address plus the VIP on `mgmt0`; its
+  InternalIP had changed since the last session, which is why nothing here
+  names an address as fixed.
+- Cilium runs `routing-mode: tunnel` with `enable-masquerade-to-route-source`
+  unset and no direct-routing device configured.
+
+Not verified: whether the kube-apiserver's `--advertise-address` follows the
+node IP independently of the VIP. It does not affect the recommendation, since
+clients reach the API through the VIP either way.
@@ -1,10 +1,25 @@
 # Cold-rebuild runbook — homelab cluster from scratch

 Rebuild the entire cluster from **this repo + backups only**, assuming nothing
-in the cluster survives (all VMs gone, Ceph gone, in-cluster Gitea gone).
+in the cluster survives (all three nodes wiped, Ceph gone, in-cluster Gitea
+gone).

 Order: **tofu → talos → flux → openbao → apps.**

+All three nodes are bare-metal MS-01 machines. Nothing provisions them: there
+are no VMs to recreate, and OpenTofu owns only DNS, object storage and UniFi.
+Step 1 is therefore two unrelated halves — a `tofu apply` for the platform
+resources, and physically booting three machines from install media.
+
+**Someone has to be at the machines to boot them from USB** — MS-01 has no IPMI
+and nothing here does PXE. Everything after that is remote.
+
+A node in maintenance mode configures no VLANs and DHCPs untagged, so it comes
+up on whatever untagged network its ports carry — not on management, which is
+a tagged VLAN on the X710 trunk. It is reachable there: that is the address
+`apply-config --insecure` talks to in Step 2, and it is how all three
+bare-metal conversions were driven. Find the leases on the UDM.
+
 ## The circular-bootstrap problem this runbook exists to break

 In steady state Flux's `GitRepository flux-system` pulls manifests from the
@@ -61,12 +76,21 @@ These must exist outside the cluster or the rebuild cannot complete:
      `openbao-daily` offsite copy. In a total-loss rebuild the offsite Velero
      copy is the one that survives.
 - [ ] **Tooling:** `talosctl`, `kubectl`, `flux`, `tofu`, `bao`, plus the
-      OpenTofu backend + Proxmox/UniFi credentials the `opentofu/` stack needs.
+      OpenTofu backend + UniFi credentials the `opentofu/` stack needs. No
+      Proxmox credentials — there is no Proxmox any more.
+- [ ] **Install media** written and to hand: the Image Factory ISO named in
+      Step 1, on a USB stick, for all three machines.
+- [ ] **Someone at the machines to boot them from USB.** No IPMI, no PXE. A
+      monitor is useful for reading boot errors but is not required to find the
+      node afterwards — it DHCPs into management on its own (see the note at
+      the top). Everything past the boot is remote.

-## Step 1 — tofu: provision the VMs + supporting infra
+## Step 1a — tofu: DNS, object storage, UniFi

-Recreate the Talos VMs and the platform resources OpenTofu owns (Proxmox VMs,
-UniFi DNS records incl. `k8s.renner.uno` / node A records, etc.).
+OpenTofu no longer provisions any node. The `proxmox_vm` module still exists in
+the tree but nothing instantiates it, so `tofu apply` here creates only the
+platform resources: UniFi DNS records including `k8s.renner.uno` and the node A
+records, the Hetzner object storage, and the NAT hairpin rules.

 ```sh
 cd opentofu
@@ -74,44 +98,119 @@ tofu init -upgrade -backend-config="access_key=..." -backend-config="secret_key=
 tofu apply
 ```

-In CI this is `.woodpecker/deploy-infrastructure.yml` (manual, `TOFU_APPLY=true`),
-which also pre-seeds the Talos image onto every Proxmox node. Wait until the
-node FQDNs (`k8s-{1,2,3}.srv.renner.uno`) resolve and the VMs are up before
-Step 2 — `bootstrap.sh` polls DNS but will not create the records.
+Run this first regardless, because Step 2 needs `k8s.renner.uno` and the node
+FQDNs to resolve — the control-plane endpoint is baked into every generated
+config, and the nodes are addressed by name.

-**k8s-1 is not a VM and OpenTofu does not create it.** jupiter runs Talos on
-bare metal, so this step only provisions k8s-2 (saturn) and k8s-3 (neptune).
-Before Step 2, boot jupiter from the bare-metal image below so it comes up in
-maintenance mode and answers on `k8s-1.srv.renner.uno` — `bootstrap.sh` treats
-all three nodes identically from there, since `apply-config --insecure` does
-not care whether the target is a VM or bare metal.
+## Step 1b — boot all three machines from install media

 ```
-https://factory.talos.dev/image/0f6fb8bd8bb53013e9743b7c7b099d96fb9c32fd2464ced32693c2dc0ea5feb9/v1.12.11/metal-amd64.iso
+https://factory.talos.dev/image/0f6fb8bd8bb53013e9743b7c7b099d96fb9c32fd2464ced32693c2dc0ea5feb9/v1.13.9/metal-amd64.iso
 ```

-That schematic is deliberately not the one `.woodpecker/deploy-infrastructure.yml`
-seeds onto the Proxmox nodes. It keeps the same `net.ifnames=1` kernel argument
-— without it the predictable interface names that `talos/patches/k8s-1.yaml`
-matches its VLAN parents against do not exist — and differs in three ways:
+Write it to a USB stick and boot each MS-01 from it. Each comes up in
+maintenance mode with a DHCP address on an untagged network — not on
+management, which is tagged. Read the leases off the UDM; those addresses are
+what Step 2 applies the first config to.

- drops `siderolabs/qemu-guest-agent`, which has nothing to talk to on bare metal
- adds `siderolabs/intel-ucode`, since no hypervisor is supplying microcode now
- adds `siderolabs/thunderbolt`, unused so far and inert until
-  `machine.kernel.modules` requests `thunderbolt`/`thunderbolt_net`. It is
-  present only so enabling the MS-01 Thunderbolt mesh later does not require a
-  new image and a reinstall. Note its udev rule auto-authorises any Thunderbolt
-  device attached to the machine once those modules are loaded.
+The schematic `0f6fb8bd…` carries `net.ifnames=1` — without it the predictable
+interface names that `talos/patches/k8s-{1,2,3}.yaml` match their VLAN parents
+against do not exist, and the node ends up with no address on any interface.
+Beyond that it carries:
+
+- `siderolabs/intel-ucode` — no hypervisor supplies microcode here
+- `siderolabs/i915` — the Alder Lake-P Iris Xe. Nothing requests `/dev/dri`
+  today; present so wanting hardware transcoding later is a config change
+  rather than another rolling reinstall
+- `siderolabs/thunderbolt` — inert until `machine.kernel.modules` requests
+  `thunderbolt`/`thunderbolt_net`, present for the same reason. Note its udev
+  rule auto-authorises any Thunderbolt device attached once those modules load
+- no `qemu-guest-agent`, which has nothing to talk to on bare metal
+
+Verify the disks before going further. Talos enumerates NVMe in an order that
+is not stable across boots, and the per-node configs select by serial for
+exactly that reason — the failure mode is the installer taking the Ceph OSD
+drive. `talosctl -n <maintenance-ip> --insecure get disks` should show three
+NVMe devices whose serials match the `diskSelector` and `VolumeConfig` entries
+in `talos/patches/k8s-N.yaml`.

 ## Step 2 — talos: form the cluster + get kubeconfig

+**Do not use `kubernetes/bootstrap.sh talos`.** That phase cannot generate a
+config: it passes `talos/patches/cilium-cni.yaml` whole, and that file's
+`$patch: delete` document fails against a base with no `inlineManifests`
+(#581). Its other phases — `flux`, `wait-apps` — are still used, in Steps 3, 5
+and 6; only config generation is broken.
+
+The procedure below is what actually works, and is the same one
+`RUNBOOK-baremetal-conversion.md` uses.
+
+### Generate the configs
+
+This is a genuinely new cluster — nothing survives to copy secrets from, so
+generate them fresh. (In a *partial* rebuild, where one node still runs, pull
+secrets off it instead with `talosctl get mc v1alpha1` + `gen secrets
+--from-controlplane-config`, or the new node forms its own cluster rather than
+joining.)
+
 ```sh
-kubernetes/bootstrap.sh talos
+talosctl gen secrets -o secrets.yaml
+
+for N in 1 2 3; do
+  talosctl gen config homelab https://k8s.renner.uno:6443 \
+    --with-secrets secrets.yaml --output-types controlplane \
+    --config-patch @talos/patches/cluster.yaml \
+    --config-patch @<cilium additive half> \
+    --config-patch @talos/patches/registry-mirror.yaml \
+    --config-patch @talos/patches/k8s-$N.yaml -o install-k8s-$N.yaml
+done
 ```

-Generates + applies Talos configs to `k8s-{1,2,3}`, bootstraps etcd/Kubernetes,
-writes `~/.talos/config` + `~/.kube/config`, and stages both into
-`kubernetes/access-staging/` for later phases. Ends when all 3 nodes are `Ready`.
+Two things the generator gets wrong for this repo, both of which will bite
+silently:
+
+- **`cilium-cni.yaml` cannot be passed whole** — extract only its additive
+  second document. See issue #581.
+- **Strip the generated `HostnameConfig`** — it collides with
+  `machine.network.hostname` from the per-node patch.
+
+Validate each before applying:
+
+```sh
+talosctl validate --config install-k8s-$N.yaml --mode metal
+```
+
+### Apply in two stages
+
+Do **not** apply the full per-node config in maintenance mode. A document that
+references an interface which does not exist yet hangs the install: the node
+sits at `STAGE: Installing` indefinitely with `KUBELET n/a` and `APISERVER n/a`,
+and nothing times out. Concretely, the `ens19` VLAN document must be removed
+from the first-stage config — its parent exists, but the install stalls anyway.
+
+```sh
+# Stage 1: minimal config, from the maintenance-mode address off the console
+talosctl apply-config --insecure -n <maintenance-ip> --file install-k8s-$N-stage1.yaml
+# Stage 2: once the node is up on management, apply the complete config
+talosctl -n k8s-$N.srv.renner.uno apply-config --mode=try --timeout=5m --file install-k8s-$N.yaml
+```
+
+`--mode=try` rolls back on its own if the node becomes unreachable, which is the
+only safety net there is for a network change that can strand a machine with no
+IPMI. Use it for every network-affecting apply, then make it permanent once
+proven.
+
+### Bootstrap etcd, then collect access
+
+Bootstrap **exactly one** node:
+
+```sh
+talosctl -n k8s-1.srv.renner.uno bootstrap
+talosctl -n k8s-1.srv.renner.uno kubeconfig .
+```
+
+Ends when all three nodes are `Ready`. `scripts/import-cluster-access.sh` is the
+supported way to get the kubeconfig into place afterwards.

 ## Step 3 — flux: bootstrap GitOps **from the GitHub mirror** (break-glass)

@@ -231,9 +330,28 @@ it: repo → **Settings → Repository → Mirror Settings** in Gitea, or
  in-cluster commits made **after** Flux/Gitea broke are not on the mirror
  (Gitea couldn't push them if Gitea itself was down). This is the intended
  recovery point, but be aware of it when reconciling drift.
- `bootstrap.sh` has no `openbao` phase — Step 4 is manual because the unseal
-  key must not live in CI. See issue #187 for the open question of whether to
-  wire a semi-automated OpenBao restore.
+- **Booting is physical; the rest is not.** MS-01 has no IPMI and nothing here
+  does PXE, so someone has to put a USB stick in three machines. From there it
+  is remote — a maintenance-mode node DHCPs untagged and is reachable at that
+  address, which is how all three bare-metal conversions were driven.
+  #576 claims a freshly booted node "comes up unreachable and must be installed
+  from a console". That is not what happens and has never been observed here.
+- **`bootstrap.sh talos` is dead** — it cannot generate a config (#581), and
+  Step 2 no longer uses it. Its `flux` and `wait-apps` phases are still used in
+  Steps 3, 5 and 6 and work; do not read this as the whole script being gone.
+  It has also never had an `openbao` phase — Step 4 is manual because the
+  unseal key must not live in CI; see issue #187 on whether to wire a
+  semi-automated OpenBao restore.
+- **OpenBao seals on every restart and each replica must be unsealed
+  individually.** Three raft replicas mean the service survives losing one, but
+  a sealed server is neither a voter nor a standby — unsealing only one leaves
+  the cluster short of quorum. Step 4 covers this; it is repeated here because
+  it is the step most likely to be half-done under pressure.
+- Ceph's cluster network is a Multus attachment on VLAN 49 with whereabouts
+  IPAM, not host networking. Nothing in the rebuild needs special handling for
+  it — the nodes hold no address on that segment — but a rebuilt cluster will
+  not have the whereabouts allocations from before, which is harmless since
+  they are assigned fresh.
 - warn-and-continue waits in the `flux` phase can mask a genuinely broken
  Ceph/infra bring-up; always read the phase output rather than trusting the
  exit code.
@@ -1,18 +0,0 @@
-apiVersion: external-secrets.io/v1
-kind: ExternalSecret
-metadata:
-  name: barman-cloud-creds
-  namespace: authentik
-  annotations:
-    # Prune-disabled — a standing guard kept from the seed->authentik-KS handoff (barman creds).
-    kustomize.toolkit.fluxcd.io/prune: disabled
-spec:
-  refreshInterval: 1h
-  secretStoreRef:
-    kind: ClusterSecretStore
-    name: openbao
-  target:
-    name: barman-cloud-creds # keeps the old Secret's name — consumers unchanged
-  dataFrom:
-    - extract:
-        key: seed/authentik/barman-creds
@@ -25,20 +25,13 @@ data:
        attrs:
          local: true

-      # Retired OIDC layer. Paperless's URL-level access is gated by the
-      # paperless-gate ProxyProvider (below); user identity is forwarded
-      # from the gate to paperless via the X-authentik-* request headers
-      # and consumed by paperless via PAPERLESS_ENABLE_HTTP_REMOTE_USER
-      # (see kubernetes/apps/paperless/paperless.yaml). One Authentik
-      # Application, one Provider — the dual-OAuth2-flow setup with a
-      # separate paperless OIDC client + django-allauth callback was
-      # structurally fine but added a second consent screen on first
-      # login for no real defense-in-depth gain.
+      # Retired OIDC layer. Access is gated by the paperless-gate
+      # ProxyProvider below, which forwards identity as X-authentik-* headers
+      # consumed via PAPERLESS_ENABLE_HTTP_REMOTE_USER.
      #
-      # Order matters: delete the Application BEFORE the OAuth2Provider
-      # because Application.provider is on_delete=PROTECT, so the
-      # OAuth2Provider can't be removed while the Application still
-      # references it.
+      # ORDER MATTERS: delete the Application BEFORE the OAuth2Provider.
+      # Application.provider is on_delete=PROTECT, so the provider cannot be
+      # removed while an Application still references it.
      - model: authentik_core.application
        identifiers:
          slug: paperless
@@ -49,22 +42,15 @@ data:
          name: Paperless
        state: absent

-      # Also clean up the very-early orphan `paperless` ProxyProvider
-      # left behind from this session's first attempts. It's not bound
-      # to anything any more, just leftover state in the DB.
+      # Orphan ProxyProvider, unbound — leftover DB state.
      - model: authentik_providers_proxy.proxyprovider
        identifiers:
          name: paperless
        state: absent

-      # Dedicated forward-auth gate for paperless. This is a SEPARATE
-      # outpost (its own Deployment + Service `ak-outpost-paperless-
-      # gate`) running in front of paperless so every request is
-      # authenticated and authorized by Authentik before it reaches
-      # paperless's own attack surface. The gate sits on top of, and
-      # separate from, the OIDC OAuth2Provider above (which is what
-      # paperless's django-allauth uses for SSO once a request makes
-      # it through the gate).
+      # Dedicated forward-auth gate for paperless: its own outpost
+      # Deployment + Service, so every request is authenticated before it
+      # reaches paperless.
      - id: paperless-gate-provider
        model: authentik_providers_proxy.proxyprovider
        identifiers:
@@ -73,16 +59,13 @@ data:
        attrs:
          authorization_flow: !Find [authentik_flows.flow, [slug, default-provider-authorization-implicit-consent]]
          invalidation_flow: !Find [authentik_flows.flow, [slug, default-provider-invalidation-flow]]
-          # Proxy (not forward_domain) so the outpost itself terminates
-          # the request and forwards to paperless — moving the trust
-          # boundary off ingress-nginx and onto paperless-gate. ingress-
-          # nginx now only routes paperless.renner.uno to the outpost
-          # service; it never talks to paperless directly. The outpost
-          # is what populates X-Authentik-Username on the upstream
-          # request, and the NetworkPolicy in the paperless namespace
-          # only allows traffic to paperless from the gate outpost pod
-          # itself, so ingress-nginx (or any other in-cluster workload)
-          # cannot bypass the gate to inject headers.
+          # Proxy, NOT forward_domain: the outpost terminates the request
+          # itself, so the trust boundary sits here rather than at the ingress
+          # controller, which only routes to the outpost Service and never
+          # reaches paperless directly. The outpost populates
+          # X-Authentik-Username, and the paperless NetworkPolicy admits
+          # traffic only from this outpost — so nothing else in the cluster
+          # can bypass the gate and inject those headers.
          mode: proxy
          internal_host: http://paperless.paperless.svc.cluster.local
          internal_host_ssl_validation: false
@@ -91,19 +74,12 @@ data:
          access_token_validity: hours=24
          refresh_token_validity: days=30
          intercept_header_auth: true
-          # Pass paperless's entire static-asset tree through anonymously.
-          # Two reasons:
-          # 1. <link rel="manifest"> is fetched with `credentials: 'omit'`
-          #    (W3C spec, no crossorigin attr) so the cookie is never sent
-          #    — every page load and every SPA navigation turned into a
-          #    302 → auth.renner.uno round-trip with an orphan session JWT.
-          #    Same root cause as the retired music-assistant-gate (see
-          #    comment further below); paperless can't retire the gate so
-          #    it carves out the offending paths instead.
-          # 2. Every CSS/JS/icon fetch otherwise validates the cookie at
-          #    the outpost — pure overhead on assets that carry no
-          #    authentication value. Django's STATIC tree is public by
-          #    design; MEDIA (under /api/documents/*) stays gated.
+          # The static-asset tree passes anonymously, and must. A
+          # <link rel="manifest"> is fetched with `credentials: 'omit'` per
+          # the W3C spec, so the session cookie is never sent and every page
+          # load turns into a redirect loop through the login origin. Django's
+          # STATIC tree is public by design; MEDIA under /api/documents/*
+          # stays gated.
          skip_path_regex: ^/static/.*

      - model: authentik_core.application
@@ -130,18 +106,14 @@ data:
          negate: false
          failure_result: false

-      # Retired: the music-assistant-gate ProxyProvider, Application,
-      # and dedicated Outpost. The gate fundamentally conflicted with
-      # MA's PWA model — Chrome fetches manifest.webmanifest / sw.js /
-      # icons with `credentials: 'omit'` (per W3C spec, no crossorigin
-      # attribute on MA's <link rel="manifest">), and the cached
-      # service worker bypasses fresh navigations on PWA cold-start so
-      # the Authentik cookie never lands in the WebAPK's cookie jar.
-      # MA has its own auth (delegated to Home Assistant); the gate's
-      # marginal value didn't justify the recurring breakage.
-      # Order matters: Application before Provider before Outpost.
-      # Application.provider is on_delete=PROTECT, so the Provider
-      # can't be removed while the Application still references it.
+      # Retired: the music-assistant gate. A forward-auth gate cannot work in
+      # front of a PWA — the manifest and service worker are fetched with
+      # `credentials: 'omit'`, and a cached service worker bypasses fresh
+      # navigations, so the session cookie never reaches the installed app.
+      # Do not reintroduce one there; MA delegates auth to Home Assistant.
+      #
+      # ORDER MATTERS: Application before Provider before Outpost, because
+      # Application.provider is on_delete=PROTECT.
      - model: authentik_core.application
        identifiers:
          slug: music-assistant-gate
@@ -157,18 +129,13 @@ data:
          name: music-assistant-gate
        state: absent

-      # Dedicated outpost: its ONLY job is to serve the in-cluster
-      # /outpost.goauthentik.io/auth/nginx endpoint that nginx
-      # auth_request hits for every request to paperless. The
-      # browser-facing legs of the OAuth flow (/start, /callback, the
-      # `/if/...` login UI, /application/o/authorize, /api, etc.) all
-      # need to happen on auth.renner.uno because that's the origin
-      # WebAuthn/FIDO/TOTP credentials are bound to. So we attach the
-      # ProxyProvider to BOTH outposts (see embedded outpost below) and
-      # set authentik_host_browser to auth.renner.uno here too — the
-      # nginx auth_request happens server-to-server, but if the
-      # dedicated outpost ever does emit a redirect URL, it points at
-      # the right host.
+      # Dedicated outpost, serving the in-cluster auth endpoint only.
+      #
+      # The browser-facing legs of the OAuth flow must happen on
+      # auth.renner.uno, because that is the origin WebAuthn credentials are
+      # bound to. Hence the ProxyProvider is attached to BOTH this outpost and
+      # the embedded one, and authentik_host_browser points at auth.renner.uno
+      # here too — so any redirect this outpost emits names the right host.
      - model: authentik_outposts.outpost
        identifiers:
          name: paperless-gate
@@ -196,12 +163,7 @@ data:
            kubernetes_ingress_secret_name: "authentik-outpost-tls"
            kubernetes_json_patches: null

-      # Tear down the leftover paperless-proxy Application from an
-      # earlier experiment. The orphan `paperless` ProxyProvider that
-      # used to back paperless.app is left in place — it's PROTECTed
-      # by Application.provider as long as anything references it, and
-      # leftover orphans don't break anything. Delete via the Authentik
-      # UI once everything's confirmed working.
+      # Leftover Application from an earlier experiment.
      - model: authentik_policies.policybinding
        identifiers:
          target: !Find [authentik_core.application, [slug, paperless-proxy]]
@@ -217,15 +179,11 @@ data:
      # ------------------------------------------------------------------
      # vscode config-editor gate
      #
-      # code-server (the HA /config editor sidecar) runs with --auth=none,
-      # as root, mounting the whole HA /config incl. plaintext secrets.yaml
-      # and .storage. This gate moves it behind Authentik with a passkey
-      # step-up, mirroring the paperless-gate proxy-outpost pattern above:
-      # the dedicated ak-outpost-vscode-gate terminates the request,
-      # enforces the session, and forwards to the code-server Service.
-      # Traefik only ever routes vscode.home.renner.uno to the outpost; the
-      # home-assistant CNP is tightened so ONLY the gate outpost may reach
-      # :8080 (see home-assistant-ns.yaml + vscode-gate-egress.yaml).
+      # code-server runs with --auth=none, as root, mounting the whole HA
+      # /config including plaintext secrets.yaml and .storage. This gate is
+      # the only thing in front of it: the outpost terminates the request and
+      # enforces a passkey step-up, Traefik routes only to the outpost, and
+      # the home-assistant CNP admits :8080 from the gate alone.
      # ------------------------------------------------------------------
      - id: vscode-config-editors-group
        model: authentik_core.group
@@ -265,17 +223,14 @@ data:
          access_token_validity: hours=24
          refresh_token_validity: days=30
          intercept_header_auth: true
-          # code-server is a service-worker app: <link rel="manifest"> and
-          # the service worker are fetched with credentials:'omit', which
-          # turned into a /authorize redirect loop and forced the RETIREMENT
-          # of the music-assistant gate (see comment above). Carve its
-          # static/manifest/SW tree out so those cookieless fetches pass
-          # through instead of 302-looping; the editor's actual content
-          # (the /config tree) is served over authenticated websocket/API
-          # paths, which stay gated.
-          # NOTE: the exact skip set is code-server-version-specific and
-          # MUST be confirmed post-deploy against the real redirect-loop
-          # behaviour (see the PR validation checklist).
+          # code-server is a service-worker app, so its manifest and SW are
+          # fetched with credentials:'omit' and 302-loop unless carved out.
+          # The editor's actual content rides authenticated websocket/API
+          # paths and stays gated.
+          #
+          # This skip set is version-specific: re-check it after a
+          # code-server bump, because a renamed asset path reintroduces the
+          # loop silently.
          skip_path_regex: ^/(_static/|manifest\.json|.*\.webmanifest|.*serviceWorker\.js).*

      - model: authentik_core.application
@@ -331,16 +286,11 @@ data:
      # ------------------------------------------------------------------
      # shelly-manager gate
      #
-      # shelly-manager has no authentication of its own: anything that can
-      # reach :8080 can rewrite Shelly device config, push scripts, and read
-      # the stored per-device AdminPassword values. Until now the only
-      # control was reachability of shelly-manager.home.renner.uno.
-      #
-      # Same shape as the vscode-gate above: a dedicated outpost terminates
-      # the request, enforces a passkey step-up, and forwards to the
-      # shelly-manager Service. Traefik only ever routes the hostname to the
-      # outpost; the home-assistant CNP allows ONLY this outpost to reach
-      # :8080 (see home-assistant-ns.yaml + shelly-manager-gate-egress.yaml).
+      # shelly-manager has no authentication of its own: anything that reaches
+      # :8080 can rewrite device config, push scripts and read the stored
+      # per-device AdminPassword values. Same shape as the vscode gate — the
+      # outpost is the only control, Traefik routes only to it, and the CNP
+      # admits :8080 from this outpost alone.
      # ------------------------------------------------------------------
      - id: shelly-managers-group
        model: authentik_core.group
@@ -15,4 +15,4 @@ spec:
    name: hetzner-s3-creds # keeps the old Secret's name — consumers unchanged
  dataFrom:
    - extract:
-        key: seed/authentik/hetzner-creds
+        key: infrastructure/hetzner-s3
@@ -27,5 +27,4 @@ resources:
  - cluster.yaml
  - objectstore.yaml
  - scheduled-backup.yaml
-  - barman-creds-externalsecret.yaml
  - hetzner-creds-externalsecret.yaml
@@ -1,50 +1,10 @@
 ---
-# The goauthentik.io operator (inside authentik-worker) auto-creates a
-# ServiceMonitor per outpost, but it does not stamp the
-# `release: kube-prometheus-stack` label that this cluster's Prometheus
-# requires on serviceMonitorSelector. Those operator-owned SMs are
-# silently ignored. Declare standalone SMs here with the correct label
-# so the outposts actually get scraped.
-apiVersion: monitoring.coreos.com/v1
-kind: ServiceMonitor
-metadata:
-  name: authentik-outpost-ldap
-  namespace: authentik
-  labels:
-    release: kube-prometheus-stack
-spec:
-  namespaceSelector:
-    matchNames:
-      - authentik
-  selector:
-    matchLabels:
-      goauthentik.io/outpost-name: ldap-outpost
-      goauthentik.io/outpost-type: ldap
-  endpoints:
-    - port: http-metrics
-      path: /metrics
-      interval: 30s
---
-apiVersion: monitoring.coreos.com/v1
-kind: ServiceMonitor
-metadata:
-  name: authentik-outpost-paperless-gate
-  namespace: authentik
-  labels:
-    release: kube-prometheus-stack
-spec:
-  namespaceSelector:
-    matchNames:
-      - authentik
-  selector:
-    matchLabels:
-      goauthentik.io/outpost-name: paperless-gate
-      goauthentik.io/outpost-type: proxy
-  endpoints:
-    - port: http-metrics
-      path: /metrics
-      interval: 30s
---
+# Only radius needs a hand-written ServiceMonitor. The goauthentik.io operator
+# creates one per outpost and Prometheus discovers those directly, because
+# serviceMonitorSelector here is empty (see monitoring/helmrelease-prometheus.yaml).
+# Standalone copies for ldap and paperless-gate used to live here as well; they
+# duplicated the operator's and were removed.
+#
 # Radius requires extra plumbing. The radius binary listens on :9300 just
 # like ldap/proxy (hardcoded in authentik/lib/default.yml), but authentik's
 # Python operator (`providers/radius/controllers/kubernetes.py`) omits the
@@ -53,6 +13,11 @@ spec:
 # it, radius does not. Result: the operator-managed `ak-outpost-local-radius`
 # Service exposes only UDP 1812. Add a sibling Service here that selects the
 # same pod labels and exposes 9300/TCP, then a ServiceMonitor for it.
+#
+# The operator's own `ak-outpost-local-radius` ServiceMonitor cannot cover
+# this: it selects on `app.kubernetes.io/managed-by: goauthentik.io` together
+# with `goauthentik.io/service-type: metrics`, and no Service carries both —
+# the operator's has the first, the one below has the second.
 apiVersion: v1
 kind: Service
 metadata:
@@ -86,6 +51,8 @@ spec:
    matchNames:
      - authentik
  selector:
+    # Pinned to the Service above. Without managed-by this would also match the
+    # operator's Service and scrape the same endpoint twice.
    matchLabels:
      app.kubernetes.io/managed-by: homelab
      goauthentik.io/outpost-name: local-radius
@@ -1,31 +0,0 @@
-apiVersion: networking.k8s.io/v1
-kind: Ingress
-metadata:
-  name: file
-  namespace: apps
-  labels:
-    app.kubernetes.io/name: file
-  annotations:
-    cert-manager.io/cluster-issuer: letsencrypt-cluster
-    # Backend serves HTTPS with a self-signed cert; re-encrypt + skip
-    # verify via the shared insecure-backend ServersTransport (see
-    # apps/insecure-backend-serverstransport.yaml).
-    traefik.ingress.kubernetes.io/service.serversscheme: https
-    traefik.ingress.kubernetes.io/service.serverstransport: insecure-backend@kubernetescrd
-spec:
-  ingressClassName: traefik
-  rules:
-    - host: file.renner.uno
-      http:
-        paths:
-          - path: /
-            pathType: Prefix
-            backend:
-              service:
-                name: file
-                port:
-                  number: 7001
-  tls:
-    - secretName: file-tls
-      hosts:
-        - file.renner.uno
@@ -1,5 +0,0 @@
-apiVersion: kustomize.config.k8s.io/v1beta1
-kind: Kustomization
-resources:
-  - service.yaml
-  - ingress.yaml
@@ -1,18 +0,0 @@
-apiVersion: v1
-kind: Service
-metadata:
-  name: file
-  namespace: apps
-  labels:
-    app.kubernetes.io/name: file
-spec:
-  # Caddy reverse-proxied https://nas.renner.uno:7001. nas.renner.uno
-  # is a CNAME -> nas-1.renner.uno owned by UniFi DNS, k8s-gateway
-  # forwards srv lookups so this resolves cluster-side.
-  type: ExternalName
-  externalName: nas.renner.uno
-  ports:
-    - name: https
-      port: 7001
-      targetPort: 7001
-      protocol: TCP
@@ -18,15 +18,18 @@ metadata:
 #
 # Opaque-label map (maintainer reference only — NOT served publicly):
 #   services group                   infrastructure group
-#     Web Service 1 = Authentik        Infrastructure 1 = PBS 2 (pbs2.renner.uno)
+#     Web Service 1 = Authentik        Infrastructure 1 = retired (was PBS 2)
 #     Web Service 2 = Gitea            Infrastructure 2 = retired (was Proxmox VE)
 #     Web Service 3 = Immich           Infrastructure 3 = UDM DNS (10.2.40.1)
 #     Web Service 4 = Woodpecker CI    Infrastructure 4 = Mosquitto MQTT broker
 #     Web Service 5 = Grafana
 #     Web Service 6 = Home Assistant
-#     Web Service 7 = Paperless
+#     Web Service 7 = retired (was the NAS file UI; never Paperless, which
+#                     this map claimed and which nothing here checks)
 #     Web Service 8 = Audiobookshelf
 #     Web Service 9 = Music Assistant
+#     Web Service 10 = TRMNL
+#     Web Service 11 = Paperless (gate-level only, see its entry)
 data:
  config.yaml: |
    storage:
@@ -121,18 +124,10 @@ data:
        conditions:
          - "[STATUS] == any(200, 301, 302)"

-      - name: Web Service 7
-        group: services
-        url: https://file.renner.uno
-        interval: 60s
-        ui:
-          hide-hostname: true
-          hide-url: true
-          hide-port: true
-          hide-conditions: true
-          hide-errors: true
-        conditions:
-          - "[STATUS] == any(200, 301, 302)"
+      # Removed 2026-08-28: the NAS file UI (file.renner.uno). Its Ingress and
+      # ExternalName Service were deleted in #696 because they pointed at
+      # nas-1, which is powered off; this check outlived them and had been
+      # reporting failure on the public page since.

      - name: Web Service 8
        group: services
@@ -178,6 +173,29 @@ data:
        conditions:
          - "[STATUS] == any(200, 301, 302)"

+      # Paperless sits entirely behind the Authentik gate — every path,
+      # including /api/, answers 302 to unauthenticated callers, so there is no
+      # endpoint that proves the app rather than the gate. This check is
+      # therefore reachability only: DNS, TLS, Traefik and the outpost. It
+      # stays green if paperless itself is dead behind a live gate.
+      #
+      # Closing that blind spot needs an in-cluster probe of the paperless
+      # ClusterIP, which crosses a namespace boundary and so needs a
+      # CiliumNetworkPolicy first — the monitoring probes get away without one
+      # only because their targets share a namespace with the prober.
+      - name: Web Service 11
+        group: services
+        url: https://paperless.renner.uno
+        interval: 60s
+        ui:
+          hide-hostname: true
+          hide-url: true
+          hide-port: true
+          hide-conditions: true
+          hide-errors: true
+        conditions:
+          - "[STATUS] == any(200, 301, 302)"
+
      # Removed 2026-05-21: Jellyfin (media.renner.uno), Wiki (wiki.renner.uno),
      # InfluxDB (influx.renner.uno) — hostnames NXDOMAIN, no Ingress; services
      # no longer deployed. Re-add when/if they come back.
@@ -191,20 +209,11 @@ data:
      # NoData). Monitor the offsite PBS from the offsite side or via a
      # check that doesn't depend on this cluster's DNS path.

-      - name: Infrastructure 1
-        group: infrastructure
-        url: https://pbs2.renner.uno:8007
-        interval: 60s
-        client:
-          insecure-skip-verify: true
-        ui:
-          hide-hostname: true
-          hide-url: true
-          hide-port: true
-          hide-conditions: true
-          hide-errors: true
-        conditions:
-          - "[STATUS] == any(200, 301, 302)"
+      # Removed 2026-08-28: PBS 2 (pbs2.renner.uno:8007) — it has no clients
+      # left. Its two were the PVE cluster, retired to bare-metal Talos, and
+      # nas-1, powered off and dropped from the repo. Checking the liveness of
+      # a backup server that nothing backs up to reports on nothing. Re-add
+      # alongside the first host that is declared to back up to it.

      - name: Infrastructure 3
        group: infrastructure
@@ -5,6 +5,12 @@ metadata:
  namespace: apps
  labels:
    app: gatus
+  annotations:
+    # Gatus reads its config once at startup and never re-reads the file, so
+    # without this a ConfigMap change reconciles cleanly and then does nothing:
+    # git and the running checks drift apart silently, with no failed resource
+    # to notice. Adding a check would not take effect either.
+    configmap.reloader.stakater.com/reload: gatus-config
 spec:
  replicas: 1
  # RWO PVC (`gatus-data`, ceph-block) — RollingUpdate's default 25% surge
@@ -22,9 +28,30 @@ spec:
      labels:
        app: gatus
    spec:
+      # The upstream image is FROM scratch with no USER, so without this the
+      # pod runs as root and trips PodSecurity restricted on four counts.
+      #
+      # The uid is numeric because a scratch image carries no /etc/passwd for
+      # the kubelet to resolve a name against. fsGroup is what makes the switch
+      # survivable: the only write path is the sqlite store on the RWO volume
+      # (/data/gatus.db, see the storage stanza in the ConfigMap), and fsGroup
+      # both chowns the existing volume and leaves the directory group-writable
+      # so sqlite can create its -wal and -journal siblings next to the db.
+      securityContext:
+        runAsNonRoot: true
+        runAsUser: 65532
+        runAsGroup: 65532
+        fsGroup: 65532
+        seccompProfile:
+          type: RuntimeDefault
      containers:
        - name: gatus
          image: twinproduction/gatus:v5.36.0 # {"$imagepolicy": "flux-system:gatus"}
+          securityContext:
+            allowPrivilegeEscalation: false
+            capabilities:
+              drop:
+                - ALL
          ports:
            - containerPort: 8080
              name: http
@@ -210,6 +210,28 @@ spec:
            - name: vscode
              containerPort: 8080
              protocol: TCP
+          # /healthz answers 200 whenever the HTTP server is up; its body
+          # reports session heartbeat state, which is not health — an idle
+          # editor reports "expired" and is perfectly fine. So this asserts
+          # that code-server is serving, not that anyone is using it.
+          #
+          # Liveness matters here more than elsewhere in this pod: code-server
+          # shares the Home Assistant config volume, and a wedged editor is
+          # otherwise invisible until someone tries to open it.
+          livenessProbe:
+            httpGet:
+              path: /healthz
+              port: vscode
+            initialDelaySeconds: 30
+            periodSeconds: 30
+            timeoutSeconds: 5
+          readinessProbe:
+            httpGet:
+              path: /healthz
+              port: vscode
+            initialDelaySeconds: 10
+            periodSeconds: 10
+            timeoutSeconds: 5
          volumeMounts:
            - name: config
              mountPath: /config
@@ -1,21 +1,8 @@
 ---
 # Barman S3 credentials for ha-pg.
 #
-# FOLLOW-UP (#397): sourced from seed/paperless/hetzner-creds, which is not where
-# they belong. woodpecker/hetzner-creds-externalsecret.yaml has the identical
-# problem and the same note. The values are the same today, so this is correct
-# but coupled: rotating paperless's Hetzner credentials would silently change
-# the backup credentials for Home Assistant and Woodpecker too.
-#
-# The fix is one dedicated path per consumer (seed/home-assistant/hetzner-creds)
-# and a one-line change to the `key:` below. Creating it needs an OpenBao write:
-#
-#   bao kv put homelab/seed/home-assistant/hetzner-creds \
-#     @<(bao kv get -format=json homelab/seed/paperless/hetzner-creds | jq '.data.data')
-#
-# Note the mount is `homelab`, so the path is homelab/seed/... — #397 records a
-# 403 on `bao kv list seed`, which was a wrong-path error rather than a
-# permissions problem.
+# One shared path for one shared credential — see the note in
+# ../paperless/hetzner-creds-externalsecret.yaml.
 #
 # The namespace allowlist on the openbao ClusterSecretStore
 # (infrastructure/post-crds/openbao-clustersecretstore.yaml) must include this
@@ -35,4 +22,4 @@ spec:
    name: hetzner-s3-creds
  dataFrom:
    - extract:
-        key: seed/paperless/hetzner-creds
+        key: infrastructure/hetzner-s3
@@ -1,80 +1,22 @@
 ---
-# mDNS relay: gives Home Assistant sight of the IoT VLAN's mDNS announcements
-# without putting a macvlan on the HA pod itself.
+# mDNS relay: holds the multicast membership on the IoT VLAN through its own
+# macvlan and forwards each datagram to Home Assistant as ordinary UNICAST UDP.
 #
-# THE PROBLEM
+# It must stay unicast. An avahi-style reflector cannot work here — Cilium runs
+# in tunnel mode without enable-multicast, so re-emitted multicast is dropped by
+# the CNI. Unicast is carried, and python-zeroconf accepts it: its datagram
+# handler checks size and duplicates but never the destination or source
+# address. RFC 6762's QU bit makes this protocol-legal rather than a trick.
 #
-# HA's zeroconf listener joins both mDNS groups on eth0 — 224.0.0.251 and
-# ff02::fb — and never hears anything on either.
-# Multicast is link-local, so IoT-VLAN announcements do not reach the pod
-# CIDR; and Cilium runs in tunnel mode (VXLAN) without `enable-multicast`, so
-# it does not replicate multicast between pods either. Both halves of the path
-# are dead, which is why an avahi-style reflector — receive on one interface,
-# re-emit as multicast on the other — cannot work here: the re-emitted packets
-# would be dropped by the CNI.
+# This restores passive reception only — announcements, including the
+# re-announce a device sends when its address changes. HA-initiated browsing
+# still dies on eth0; that would need a querier on the VLAN side, which this
+# deliberately is not.
 #
-# Consequence for HA: the ESPHome integration dials devices at the address
-# cached in its config entry. When a lease rotates, every attempt fails with
-# `[Errno 113] Connect call failed` and the device stays unreachable, because
-# the mDNS announcement that would carry the new address never arrives. New
-# devices are never discovered at all.
-#
-# THE MECHANISM
-#
-# This relay holds the multicast membership on the IoT VLAN through its own
-# macvlan (mdns-relay-network-attachment.yaml) and forwards each datagram it
-# receives to HA as ordinary UNICAST UDP. That is the one direction of travel
-# the CNI will carry.
-#
-# It works because python-zeroconf does not filter on how a packet arrived:
-# its datagram handler validates size, deduplicates, and parses, but performs
-# no check on destination address, source address, or source port. A unicast
-# datagram delivered to :5353 is processed exactly like a multicast one. (mDNS
-# unicast responses are part of RFC 6762 — the QU bit — so this is within the
-# protocol, not a trick.)
-#
-# WHAT THIS DOES AND DOES NOT RESTORE
-#
-# Restored: passive reception. RFC 6762 requires a responder to re-announce
-# when its address changes, so a device that moves to a new lease announces
-# the move, HA sees it, and the ESPHome integration updates the config entry.
-# That is the failure this exists to fix. New devices announcing themselves
-# are likewise seen.
-#
-# NOT restored: HA-initiated browsing. Queries HA sends leave on eth0 as
-# multicast and die there, so HA cannot actively solicit a response. Anything
-# depending on a query rather than an announcement stays broken. Making that
-# work needs a querier on the VLAN side, which this relay deliberately is not.
-#
-# EXPOSURE
-#
-# The receive sockets carry so-bindtodevice=net1, so only datagrams that
-# actually arrived on the IoT VLAN interface are delivered. Binding to net1's
-# address instead is not possible — it is DHCP-leased and unknown at exec time
-# — but binding to the device achieves the same confinement without needing to
-# know the address, and needs no capability: SO_BINDTODEVICE succeeds as an
-# unprivileged uid here.
-#
-# Without it socat would bind the wildcard, and since the namespace CNP grants
-# every pod in home-assistant unrestricted access to every other pod on every
-# port, any sibling pod could reach :5353 over the cluster network and have
-# records forwarded into HA's zeroconf cache.
-#
-# What remains, and cannot be closed here: any host on the IoT VLAN can send
-# this port a datagram. That is the same trust already extended to genuine
-# mDNS from that segment, which any device there can equally forge — the relay
-# widens who can reach HA's listener, not what can be claimed. macvlan traffic
-# bypasses Cilium policy entirely, so the namespace CNP does not constrain
-# this interface either way.
-#
-# Note that the relay is not what makes HA's zeroconf reachable from inside
-# the cluster: HA binds :5353 on the pod address (v4) and the wildcard (v6),
-# and the namespace CNP already permits any sibling pod to reach it directly.
-# Confining the relay removes a second route to that listener; it does not
-# remove the first.
-#
-# Nothing else is exposed: the containers run socat and only socat, with no
-# second listener to reach.
+# so-bindtodevice=net1 on both receive sockets is load-bearing: without it
+# socat binds the wildcard, and the namespace CNP lets any sibling pod reach
+# :5353 and inject records into HA's zeroconf cache. Binding net1's address
+# instead is impossible — it is DHCP-leased and unknown at exec time.
 apiVersion: apps/v1
 kind: Deployment
 metadata:
@@ -6,32 +6,23 @@ metadata:
  labels:
    app.kubernetes.io/name: mosquitto
  annotations:
-    # REQUIRED for credential rotation to take effect at all. The startup shim
-    # rebuilds /mosquitto/auth/passwd from these Secrets on every pod start, so
-    # a rotated Secret is inert until the pod restarts — without this the new
-    # password would sit unused until some unrelated restart, while the old one
-    # stayed valid indefinitely.
+    # REQUIRED for credential rotation to take effect. The startup shim rebuilds
+    # the password file only on pod start, so without this a rotated Secret sits
+    # inert while the old password stays valid indefinitely.
    #
-    # Listed per-Secret rather than using the blanket `reloader.stakater.com/
-    # auto: "true"`, so that enrolling each remaining broker user in rotation is
-    # a visible, reviewable edit to this line rather than something that starts
-    # happening implicitly.
+    # Listed per-Secret rather than with the blanket auto annotation, so that
+    # enrolling another broker user is a visible edit to this line.
    secret.reloader.stakater.com/reload: mosquitto-health-credentials
 spec:
  replicas: 1
  strategy:
-    # No PVC anymore, so nothing to fence: the new broker can come up and pass
-    # its readiness probe before the old one is torn down. maxUnavailable:0 keeps
-    # a broker serving throughout an image bump / reschedule (clients on the old
-    # pod just reconnect to the new one); maxSurge:1 permits the brief two-pod
-    # overlap — two independent stateless brokers behind the LB, fine since there
-    # is no shared state.
+    # No PVC, so nothing to fence — the new broker can serve before the old one
+    # is torn down. Two stateless brokers overlapping behind the LB is fine.
    #
-    # NOTE: connectivity survives the roll, but RETAINED STATE DOES NOT — the
-    # new pod starts with an empty retained store, so a roll is equivalent to a
-    # broker restart for every client that depends on retention. Zigbee2MQTT
-    # does not recover from that on its own; see mosquitto-config.yaml and
-    # gitea issue #381.
+    # Connectivity survives a roll but RETAINED STATE DOES NOT: the new pod
+    # starts with an empty retained store, so every roll is a broker restart
+    # for clients that depend on retention. Zigbee2MQTT does not recover from
+    # that on its own (#381).
    type: RollingUpdate
    rollingUpdate:
      maxUnavailable: 0
@@ -44,14 +35,10 @@ spec:
      labels:
        app.kubernetes.io/name: mosquitto
    spec:
-      # Runs on any node (no nodeSelector); the mosquitto-iot LB forwards
-      # IoT-VLAN traffic to the broker wherever it lands.
-      # Availability: home-critical priority (never preempted, reschedules
-      # first) + short fault tolerations so a node failure reschedules the
-      # broker in ~30s instead of the default ~5min. With persistence off there
-      # is no PVC to fence/detach/reattach, so the broker can (re)start anywhere
-      # instantly, no longer depends on Ceph being healthy, and rolls without a
-      # tear-down-first gap (see the RollingUpdate strategy above).
+      # Runs anywhere; the mosquitto-iot LB finds it. Short fault tolerations
+      # reschedule the broker in ~30s rather than the default ~5min, which is
+      # only possible because there is no PVC to fence — so it also does not
+      # depend on Ceph being healthy.
      priorityClassName: home-critical
      terminationGracePeriodSeconds: 10
      tolerations:
@@ -6,12 +6,9 @@ metadata:
  labels:
    app.kubernetes.io/name: zigbee2mqtt
 spec:
-  # CUTOVER DONE (2026-07-23): ZHA disabled, the coordinator-backup Secret is
-  # populated in OpenBao, and Z2M is now the live Zigbee stack — so replicas is
-  # 1. It shipped at 0 as a safety interlock (Z2M contends with ZHA for the
-  # coordinator's single TCP session, and starting without the restored backup
-  # would form a NEW network and drop every device); that interlock is spent
-  # once the migration is committed. To roll back, set 0 and re-enable ZHA.
+  # Z2M is the live Zigbee stack. Never run it alongside ZHA: they contend for
+  # the coordinator's single TCP session, and a Z2M start without the restored
+  # coordinator backup forms a NEW network and drops every paired device.
  replicas: 1
  # RWO PVC → single writer; never run two pods against the same /app/data.
  strategy:
@@ -39,14 +36,10 @@ spec:
        # network_key, the latter extracted from the OpenBao coordinator backup
        # as a natural-byte-order int array.
        - name: seed-data
-          # alpine + jq, built by .woodpecker/build-ci-images.yml from
-          # ci/images/alpine-jq/. Replaces `apk add --no-cache jq` on every pod
-          # start: tools belong in the image, not installed at runtime.
-          # Referenced by tag rather than digest — these are our own images.
-          # DATED tag, not :latest, matching the ci-ansible:2026-04-29 precedent
-          # in kubernetes/infrastructure/netbird-backup/cronjob.yaml. With
-          # :latest, rebuilding this base for some unrelated consumer would
-          # silently change what this init container runs on its next pod
+          # Our own alpine + jq image, built by build-ci-images.yml. DATED tag,
+          # never :latest — rebuilding this base for an unrelated consumer
+          # would otherwise silently change what this init container runs on
+          # its next pod
          # restart, with no diff here to review — and this is the container that
          # renders the Zigbee network key. Bumping the tag is a deliberate,
          # reviewable act; the cost is remembering to bump it.
@@ -1,18 +0,0 @@
-apiVersion: external-secrets.io/v1
-kind: ExternalSecret
-metadata:
-  name: barman-cloud-creds
-  namespace: immich
-  annotations:
-    # Prune-disabled — a standing guard kept from the seed->immich-KS handoff (barman creds).
-    kustomize.toolkit.fluxcd.io/prune: disabled
-spec:
-  refreshInterval: 1h
-  secretStoreRef:
-    kind: ClusterSecretStore
-    name: openbao
-  target:
-    name: barman-cloud-creds # keeps the old Secret's name — consumers unchanged
-  dataFrom:
-    - extract:
-        key: seed/immich/barman-creds
@@ -15,4 +15,4 @@ spec:
    name: hetzner-s3-creds # keeps the old Secret's name — consumers unchanged
  dataFrom:
    - extract:
-        key: seed/immich/hetzner-creds
+        key: infrastructure/hetzner-s3
@@ -13,6 +13,5 @@ resources:
  - cluster.yaml
  - objectstore.yaml
  - scheduled-backup.yaml
-  - barman-creds-externalsecret.yaml
  - hetzner-creds-externalsecret.yaml
  - pvcs.yaml
@@ -1,20 +0,0 @@
-# Shared Traefik ServersTransport for ingresses that re-encrypt to a
-# backend serving HTTPS with a self-signed / hostname-mismatched cert:
-#
-#   apps/file       — NAS web UI on a self-signed cert
-#
-# Replaces the nginx `backend-protocol: HTTPS` + `proxy-ssl-verify: off`
-# annotation pair. Each Ingress that wants this behaviour sets
-#   traefik.ingress.kubernetes.io/service.serversscheme: https
-#   traefik.ingress.kubernetes.io/service.serverstransport: insecure-backend
-#
-# (bare name — kubernetesIngress provider resolves ServersTransport in
-# the same namespace as the Ingress; the `<ns>-<name>@kubernetescrd`
-# qualified form is for IngressRoute CRDs only).
-apiVersion: traefik.io/v1alpha1
-kind: ServersTransport
-metadata:
-  name: insecure-backend
-  namespace: apps
-spec:
-  insecureSkipVerify: true
@@ -1,10 +1,8 @@
 apiVersion: kustomize.config.k8s.io/v1beta1
 kind: Kustomization
 resources:
-  - insecure-backend-serverstransport.yaml
  - gatus/
  - external-dns/
-  - file/
  - gitea/
  - ical-proxy/
  # woodpecker/ moved to its own dedicated `woodpecker` Kustomization
@@ -5,9 +5,8 @@ metadata:
  namespace: monitoring
  labels:
    app.kubernetes.io/name: alloy
-    # kube-prometheus-stack's Prometheus resource selects ServiceMonitors
-    # by this label; without it the resource exists but is never
-    # discovered.
+    # Not required for discovery — serviceMonitorSelector is empty — but kept
+    # for consistency with the other monitors.
    release: kube-prometheus-stack
 spec:
  selector:
@@ -1,7 +1,8 @@
 # Scrape the CNPG Postgres instances (port 9187, built-in exporter).
-# CNPG's own enablePodMonitor would generate PodMonitors without the
-# `release: kube-prometheus-stack` label, which this Prometheus requires
-# (podMonitorSelector), so we define them here instead.
+# Defined here rather than via CNPG's own enablePodMonitor so the scrape
+# config lives with the other monitors. The `release` label below is not
+# required for discovery — podMonitorSelector is empty — but kept for
+# consistency.
 apiVersion: monitoring.coreos.com/v1
 kind: PodMonitor
 metadata:
@@ -5,9 +5,8 @@ metadata:
  namespace: home-assistant
  labels:
    app.kubernetes.io/name: home-assistant
-    # kube-prometheus-stack's Prometheus resource selects ServiceMonitors
-    # by this label; without it the resource exists but is never
-    # discovered. Same trap the garage PrometheusRule documents.
+    # Not required for discovery — serviceMonitorSelector is empty — but kept
+    # for consistency with the other monitors.
    release: kube-prometheus-stack
 spec:
  selector:
@@ -4,14 +4,18 @@ kind: Kustomization
 # come from the kube-prometheus-stack chart. Flux applies this Kustomization
 # only after `monitoring` is Ready (chart installed → CRDs present).
 resources:
+  - prometheusrule-blackbox.yaml
  - prometheusrule-ceph.yaml
+  - prometheusrule-ci-openbao.yaml
  - prometheusrule-cilium.yaml
+  - prometheusrule-disk-wear.yaml
  - prometheusrule-hetzner-backup.yaml
  - prometheusrule-loki.yaml
  - prometheusrule-mariadb-backup.yaml
  - prometheusrule-netbird-availability.yaml
  - prometheusrule-netbird-backup.yaml
  - prometheusrule-netbird-ingress.yaml
+  - prometheusrule-openbao.yaml
  - prometheusrule-velero.yaml
  - prometheusrule-woodpecker-rotation.yaml
  # CNPG backup health. Seven Postgres clusters ship to Hetzner and nothing
@@ -23,4 +27,5 @@ resources:
  - home-assistant-servicemonitor.yaml
  - immich-servicemonitor.yaml
  - loki-servicemonitor.yaml
+  - smartctl-exporter-servicemonitor.yaml
  - probes-blackbox.yaml
@@ -5,9 +5,8 @@ metadata:
  namespace: monitoring
  labels:
    app.kubernetes.io/name: loki
-    # kube-prometheus-stack's Prometheus resource selects ServiceMonitors
-    # by this label; without it the resource exists but is never
-    # discovered.
+    # Not required for discovery — serviceMonitorSelector is empty — but kept
+    # for consistency with the other monitors.
    release: kube-prometheus-stack
 spec:
  # Matches the `loki` (single-binary) and `loki-canary` services, but
@@ -1,5 +1,9 @@
 # HTTP probes — fan out to blackbox-exporter. Probe targets mirror the
 # legacy Ansible role's blackbox_http_targets list.
+#
+# The `release` label on every Probe here IS load-bearing: probeSelector still
+# matches on it, unlike serviceMonitorSelector and podMonitorSelector, which
+# are empty. Removing it silently stops the probe from being discovered.
 apiVersion: monitoring.coreos.com/v1
 kind: Probe
 metadata:
@@ -45,6 +49,28 @@ spec:
        # ports outside the hairpin's 80/443 — real WAN path.
        - http://proxy-1.renner.uno:9000/health
        - http://proxy-2.renner.uno:9000/health
+        # Woodpecker. Ungated, root returns 200 with no redirect. Every
+        # scheduled job in this repo runs here — the alert-monitor cron, the
+        # nightly scans, the deploy targets — so an outage here is silent by
+        # construction: the thing that would have told you is the thing that
+        # is down.
+        - https://ci.renner.uno
+        # OpenBao. Probes the health API rather than the UI on purpose: a
+        # SEALED instance still serves the UI (307 -> /ui/ -> 200) while every
+        # ExternalSecret in the cluster fails, which is exactly the
+        # green-while-broken shape this file warns about elsewhere.
+        #
+        # standbyok=true because the endpoint answers 200 only on the ACTIVE
+        # node and 429 on a standby — the external route currently lands on a
+        # standby, so the bare path would be permanently red. With the
+        # parameter, 200 means initialized, unsealed and serving, on whichever
+        # node answers; 503 sealed and 501 uninitialized both stay red.
+        - https://openbao.renner.uno/v1/sys/health?standbyok=true
+        # ical-proxy serves an unauthenticated /health that answers 200 with
+        # {"status":"healthy"}. Unlike the gated hostnames this is real app
+        # health, not reachability — the root path returns 404 by design, since
+        # the service only answers on calendar paths.
+        - https://ical-proxy.renner.uno/health
        # APP-HEALTH probes for the gated monitoring UIs, from the correct
        # in-cluster vantage (monitoring-vantage-point-rule): the gate is
        # only on the ingress, so the ClusterIP /-/healthy endpoints are
@@ -57,6 +83,11 @@ spec:
        # external reachability probe above; it is not the health vantage.)
        - http://kube-prometheus-stack-alertmanager.monitoring.svc.cluster.local:9093/-/healthy
        - http://kube-prometheus-stack-prometheus.monitoring.svc.cluster.local:9090/-/healthy
+        # Loki has no external vantage at all: its ingress requires auth on
+        # every path, so an outside probe can only ever report 401. In-cluster
+        # /ready answers 200 unauthenticated and is in this namespace, so the
+        # same intra-namespace allowance the two above rely on covers it.
+        - http://loki.monitoring.svc.cluster.local:3100/ready
 # WAN-path probes of the public edge BY PROXY IP. The name-based
 # home.renner.uno probe above resolves in-cluster (CoreDNS/k8s_gateway)
 # and never leaves the LAN — the vantage-point blind spot that let the
@@ -0,0 +1,59 @@
+apiVersion: monitoring.coreos.com/v1
+kind: PrometheusRule
+metadata:
+  name: blackbox
+  namespace: monitoring
+  labels:
+    # kube-prometheus-stack's Prometheus resource selects on this label;
+    # without it the rule is created but never loaded into Prometheus.
+    release: kube-prometheus-stack
+spec:
+  groups:
+    - name: blackbox.rules
+      rules:
+        # Catch-all for every blackbox-http target that has no rule of its own.
+        # Before this existed, a target could be probed, graphed and completely
+        # unalerted — which is how file.renner.uno served 502 for months.
+        #
+        # THE EXCLUSION LIST AND THE DEDICATED RULES ARE ONE INVARIANT: an
+        # instance belongs here only while a rule elsewhere covers it, and
+        # adding a dedicated rule means adding its instance here. Get it wrong
+        # in one direction and the alert fires twice; wrong in the other and it
+        # never fires at all. Currently excluded:
+        #
+        #   fsn1.your-objectstorage.com   HetznerBackupEndpointDown (critical)
+        #   netbird.renner.uno            prometheusrule-netbird-availability
+        #   proxy-1/2:9000/health         same file, relay redundancy
+        #   ci.renner.uno                 WoodpeckerDown
+        #   openbao .../sys/health        OpenBaoUnavailable
+        #
+        # Warning, not critical, on purpose: this rule cannot know what a given
+        # target means. A target whose loss deserves a critical page gets its
+        # own rule — and lands in the list above. That is what keeps the
+        # exclusion list from being arbitrary.
+        - alert: BlackboxProbeFailing
+          expr: probe_success{job="blackbox-http", instance!~"https://fsn1\\.your-objectstorage\\.com|https://netbird\\.renner\\.uno|http://proxy-[12]\\.renner\\.uno:9000/health|https://ci\\.renner\\.uno|https://openbao\\.renner\\.uno/v1/sys/health.*"} == 0
+          for: 10m
+          annotations:
+            summary: "Blackbox probe of {{ $labels.instance }} has been failing for 10 minutes"
+            description: >-
+              The endpoint is not answering as expected. For the Authentik-gated
+              hostnames this is a reachability check covering DNS, TLS, Traefik
+              and the gate outpost — it says nothing about the app behind the
+              gate, which the internal /-/healthy probes cover separately.
+          labels:
+            severity: warning
+        # The check that the checks are running. Every rule above reads
+        # probe_success; if the series stop being produced at all, none of them
+        # can fire and the silence looks exactly like health.
+        - alert: BlackboxProbesAbsent
+          expr: absent(probe_success{job="blackbox-http"})
+          for: 15m
+          annotations:
+            summary: "No blackbox-http probe results are reaching Prometheus"
+            description: >-
+              Either the blackbox exporter is down or the Probe objects stopped
+              being discovered. Every endpoint alert depends on this job, so
+              they are all blind until it returns.
+          labels:
+            severity: critical
@@ -0,0 +1,47 @@
+apiVersion: monitoring.coreos.com/v1
+kind: PrometheusRule
+metadata:
+  name: ci-openbao
+  namespace: monitoring
+  labels:
+    # kube-prometheus-stack's Prometheus resource selects on this label;
+    # without it the rule is created but never loaded into Prometheus.
+    release: kube-prometheus-stack
+spec:
+  groups:
+    - name: ci-openbao.rules
+      rules:
+        - alert: WoodpeckerDown
+          # Probe target defined in probes-blackbox.yaml. Root, ungated, 200.
+          expr: probe_success{job="blackbox-http", instance="https://ci.renner.uno"} == 0
+          for: 5m
+          labels:
+            severity: warning
+          annotations:
+            summary: "Woodpecker is not answering on ci.renner.uno"
+            description: >-
+              Every scheduled job in this repo runs here: the alert-monitor
+              cron that files these issues, the nightly scans, and every deploy
+              target. Nothing else reports this outage, because the component
+              that would have reported it is the one that is down. Alertmanager
+              itself is unaffected, which is why this alert exists.
+        - alert: OpenBaoUnavailable
+          # Probes /v1/sys/health?standbyok=true — 200 on any unsealed node,
+          # 503 sealed, 501 uninitialized. The UI stays up when sealed, so a
+          # root probe would not catch this.
+          #
+          # Matched by prefix rather than the full string: the target carries a
+          # query parameter, and an exact match would break silently if the
+          # instance label ever encodes it differently.
+          expr: probe_success{job="blackbox-http", instance=~"https://openbao\\.renner\\.uno/v1/sys/health.*"} == 0
+          for: 5m
+          labels:
+            severity: critical
+          annotations:
+            summary: "OpenBao is sealed, uninitialized or unreachable"
+            description: >-
+              Every ExternalSecret in the cluster resolves through OpenBao.
+              Existing Secrets keep working, so nothing breaks at once — the
+              damage shows up at the next refresh interval or the next pod that
+              needs a fresh credential. Check whether it is sealed before
+              assuming a network fault.
@@ -11,25 +11,22 @@ spec:
  groups:
    - name: cnpg-backup.rules
      rules:
-        # WHY THIS FILE EXISTS
-        # Seven Postgres clusters back up to Hetzner and NOTHING alerted if that
-        # stopped. The only related rule was HetznerBackupEndpointDown, which
-        # probes the S3 endpoint — it proves the bucket is reachable, not that
-        # anything was written to it. Same failure shape as the WordPress backup
-        # that failed nightly for three days against a bucket that was declared
-        # in tofu but never applied: the status surface looked fine because
-        # nothing checked the thing that mattered.
+        # The Postgres clusters back up to Hetzner. HetznerBackupEndpointDown
+        # probes that S3 endpoint, which proves the bucket is reachable and
+        # nothing more — these two rules check that something is actually being
+        # written to it.

        - alert: CNPGWalArchiveBacklog
          # `ready` counts WAL segments sitting in pg_wal/archive_status waiting
-          # to be archived. Steady state is 0 across every cluster (verified
-          # 2026-08-19). A sustained backlog means the archiver is failing:
-          # point-in-time recovery is silently broken from that moment, and
-          # pg_wal keeps growing until it fills the PVC and takes Postgres down.
+          # to be archived. Steady state is 0. A sustained backlog means the
+          # archiver is failing: point-in-time recovery is silently broken from
+          # that moment, and pg_wal keeps growing until it fills the PVC and
+          # takes Postgres down.
          #
-          # This is the load-bearing alert of the two. It depends only on the
-          # instance-level collector, so unlike the backup-age metrics below it
-          # is unaffected by the missing Backup CRs (#522).
+          # This is the load-bearing alert of the two. It reads the
+          # instance-level collector directly, so unlike the backup-age metric
+          # discussed below it does not depend on Cluster status being
+          # populated.
          #
          # Threshold: >5 segments sustained for 30m. Brief non-zero values are
          # normal under write bursts — a segment is 16 MiB, so 5 is roughly
@@ -63,16 +60,17 @@ spec:
        #
        # The natural expression is
        #   (time() - cnpg_collector_last_available_backup_timestamp) > 48*3600
-        # and it CANNOT be used today: that metric reads exactly 0 on every
-        # instance in the cluster (verified 2026-08-19 across gf-pg, ak-pg-1/2,
-        # pprl-pg-2/3, im-pg, wp-pg, ha-pg). CNPG has no record of any
-        # successful backup anywhere, because the Backup CRs it derives that
-        # from are being deleted within a minute of completing — see #522.
+        # and it cannot be used, because that metric reads exactly 0 on every
+        # instance. The collector derives it from `Cluster.status
+        # .lastSuccessfulBackup`, and that field is absent on every Cluster
+        # here: all of them back up with `method: plugin` (barman-cloud), and
+        # the plugin path does not write it back.
        #
-        # Backups themselves DO work; that was verified independently by
-        # listing the bucket with barman-cloud-backup-list and restoring a WAL
-        # segment back out of S3. The gap is in the record, not the data.
+        # The backups themselves run and are retained — completed Backup CRs
+        # going back weeks exist for every scheduled cluster. The gap is in the
+        # status field the metric reads, not in the data.
        #
-        # Adding the rule now would fire permanently for all seven clusters and
-        # be silenced within a day, which is worse than not having it. Add it as
-        # part of resolving #522, once the metric reflects reality.
+        # Adding the rule against that metric would fire permanently for every
+        # cluster, which is worse than not having it. Either the plugin starts
+        # populating the field, or the alert has to be built on the Backup CRs
+        # directly, which Prometheus does not see today.
@@ -0,0 +1,125 @@
+apiVersion: monitoring.coreos.com/v1
+kind: PrometheusRule
+metadata:
+  name: disk-wear
+  namespace: monitoring
+  labels:
+    # kube-prometheus-stack's Prometheus resource selects on this label;
+    # without it the rule is created but never loaded into Prometheus.
+    release: kube-prometheus-stack
+spec:
+  groups:
+    - name: disk-wear.rules
+      rules:
+        # Wear percentages are self-reported: 100 means the rated endurance is
+        # spent, not that the drive stops.
+        #
+        # Wear alone is not a signal. It only ever rises, so a plain threshold
+        # starts firing the day a drive crosses it and never stops — a status
+        # dressed as an alert (#673, #675, #682, #686 were all one drive set
+        # crossing 80%). What matters is wear that is high AND still climbing,
+        # so the alert below is a projection: at the write rate of the last
+        # week, when does this drive reach 95%?
+        #
+        # The rate is self-calibrating. Each drive reports both its lifetime
+        # bytes written and its own wear percentage, so bytes-per-percent comes
+        # from the drive itself and no rated-endurance table has to be kept in
+        # sync with the hardware. percentage_used is a whole-number percent and
+        # advances only every few weeks here, which is far too coarse to
+        # differentiate; bytes_written moves on every scrape.
+        - alert: NvmeDriveWearProjectedExhaustion
+          # The >= 80 gate is numerical, not editorial: bytes-per-percent is
+          # derived by dividing by an integer percentage, so on a lightly worn
+          # drive a half-percent rounding error swings the projection by tens
+          # of percent. Above 80 the same rounding is under one percent.
+          # Idle drives divide by a zero rate and yield +Inf, which is not < the
+          # threshold, so they stay silent on their own.
+          expr: >-
+            (
+              (95 - smartctl_device_percentage_used)
+              /
+              (
+                rate(smartctl_device_bytes_written[7d]) * 86400
+                  * smartctl_device_percentage_used
+                  / smartctl_device_bytes_written
+              )
+            ) < 180
+            and smartctl_device_percentage_used >= 80
+          # Long, because a projection off a 7d rate should not react to a day.
+          for: 6h
+          labels:
+            severity: warning
+          annotations:
+            summary: "NVMe {{ $labels.device }} on {{ $labels.instance }} projects to 95% wear in {{ $value | printf \"%.0f\" }} days"
+            description: >-
+              The drive is past 80% of its rated endurance and the write rate
+              of the last week would spend the rest within six months. This is
+              a lead-time warning, not a fault: decide whether to replace the
+              drive or move what is writing to it. The Disk Health dashboard
+              shows which drives carry which role.
+        # Kept as a flat threshold on purpose: past rated endurance the drive
+        # runs outside what the manufacturer stands behind regardless of how
+        # fast it got there, and the alert clears by replacing it.
+        - alert: NvmeDriveWearCritical
+          expr: smartctl_device_percentage_used >= 95
+          for: 1h
+          labels:
+            severity: critical
+          annotations:
+            summary: "NVMe {{ $labels.device }} on {{ $labels.instance }} is at {{ $value }}% rated wear"
+            description: >-
+              The drive is at or past the end of its rated endurance. It will
+              likely keep working for a while, but it is now operating outside
+              what the manufacturer stands behind, and replacement should be
+              scheduled rather than considered.
+        # Wear is a budget; spare exhaustion is damage.
+        - alert: NvmeDriveSpareExhausted
+          expr: smartctl_device_available_spare <= smartctl_device_available_spare_threshold
+          for: 15m
+          labels:
+            severity: critical
+          annotations:
+            summary: "NVMe {{ $labels.device }} on {{ $labels.instance }} has exhausted its spare area"
+            description: >-
+              Available spare has fallen to the manufacturer's threshold. The
+              drive has run out of reserve blocks to remap failures into.
+              Replace it.
+        - alert: NvmeDriveCriticalWarning
+          expr: smartctl_device_critical_warning > 0
+          for: 5m
+          labels:
+            severity: critical
+          annotations:
+            summary: "NVMe {{ $labels.device }} on {{ $labels.instance }} reports critical warning {{ $value }}"
+            description: >-
+              The drive has raised its own critical warning flag. Read the
+              detail with `smartctl -a` on the node; the value is a bitfield,
+              not a count.
+        - alert: NvmeDriveMediaErrors
+          # On the increase, not the total: pre-existing errors would otherwise
+          # alert forever. Standing counts are visible on the dashboard only.
+          expr: increase(smartctl_device_media_errors[6h]) > 0
+          for: 5m
+          labels:
+            severity: warning
+          annotations:
+            summary: "NVMe {{ $labels.device }} on {{ $labels.instance }} recorded {{ $value }} new media errors"
+            description: >-
+              The drive reported unrecoverable data-integrity errors in the
+              last six hours. A healthy drive never increments this. Check
+              whether Ceph has logged scrub errors on the same node.
+        # The check that the checks are running: no series fires no alert.
+        # Counted against node-exporter's inventory, not a fixed fleet size.
+        - alert: SmartctlExporterIncomplete
+          expr: count(smartctl_device_percentage_used) < count(node_nvme_info) or absent(smartctl_device_percentage_used)
+          for: 30m
+          labels:
+            severity: warning
+          annotations:
+            summary: "Fewer NVMe drives report SMART than node-exporter can see"
+            description: >-
+              Some drives visible to node-exporter are not reporting SMART, or
+              none are. Either a DaemonSet pod is down or a drive stopped
+              answering — both mean the wear alerts above have stopped watching
+              part of the fleet, which looks identical to everything being
+              fine.
@@ -17,11 +17,12 @@ spec:
          # drains on recovery) and Velero backups fail. Replaces the old
          # GarageDown alert now that backups live on Hetzner, not nas-1.
          #
-          # CNPG has no metric-based archiving alert yet — its pod metrics
-          # are not scraped (enablePodMonitor=false). Enabling CNPG
-          # PodMonitors for a granular "archiving falling behind" alert is
-          # a follow-up. Velero's own VeleroBackupValidationFailure /
-          # VeleroBackupStale rules already cover backup-level failures.
+          # The granular counterpart is CNPGWalArchiveBacklog in
+          # prometheusrule-cnpg-backup.yaml, reading the instance collector
+          # scraped by cnpg-podmonitors.yaml: this alert says the target is
+          # unreachable, that one says archiving is falling behind whatever the
+          # cause. Velero's VeleroBackupValidationFailure / VeleroBackupStale
+          # cover backup-level failures.
          expr: probe_success{instance="https://fsn1.your-objectstorage.com"} == 0
          for: 10m
          labels:
@@ -0,0 +1,91 @@
+apiVersion: monitoring.coreos.com/v1
+kind: PrometheusRule
+metadata:
+  name: openbao
+  namespace: monitoring
+  labels:
+    # kube-prometheus-stack's Prometheus resource selects on this label;
+    # without it the rule is created but never loaded into Prometheus.
+    release: kube-prometheus-stack
+spec:
+  groups:
+    - name: openbao.rules
+      rules:
+        # WHY THIS WATCHES POD READINESS RATHER THAN A SEAL METRIC
+        #
+        # OpenBao is not scraped: there is no ServiceMonitor for it, and its
+        # metrics endpoint needs either a token or an explicit
+        # `unauthenticated_metrics_access` telemetry setting, neither of which
+        # is configured. Confirmed against Prometheus — no bao_* or vault_*
+        # series exist. External Secrets exports nothing usable either, so the
+        # ClusterSecretStore going NotReady is invisible as a metric.
+        #
+        # kube-state-metrics readiness carries the signal anyway, and does so
+        # for a structural reason rather than by luck: a sealed OpenBao fails
+        # its readiness probe, because a sealed server can neither serve
+        # requests nor act as a raft standby. Sealed is therefore always
+        # not-Ready. The converse does not hold — a crash or a stuck
+        # scheduling would also fire this — but both want a human too, so the
+        # imprecision costs nothing.
+        - alert: OpenBaoReplicaNotReady
+          # A replica that is sealed never recovers on its own, so the
+          # duration is only there to ignore ordinary rescheduling: a healthy
+          # pod moving between nodes is Ready again in well under a minute.
+          expr: kube_statefulset_status_replicas_ready{namespace="openbao", statefulset="openbao"} < 3
+          for: 10m
+          labels:
+            severity: warning
+          annotations:
+            summary: "OpenBao has {{ $value }} of 3 replicas ready"
+            description: >-
+              An OpenBao replica has been unavailable for 10 minutes. The usual
+              cause is a sealed replica after a node drain — every restart
+              seals it, and it stays out of the raft cluster until unsealed by
+              hand. The service is still up on the remaining replicas, so
+              nothing is broken yet, but redundancy is reduced and a second
+              drain would cost quorum. Check `kubectl -n openbao get pods` and
+              `bao status` in the not-ready pod; unseal with the key from
+              `pass` (homelab/openbao/unseal-key).
+
+        - alert: OpenBaoQuorumLost
+          # Raft quorum of a three-node cluster is two. At one ready replica
+          # the cluster cannot elect a leader and the secret store is down:
+          # the ClusterSecretStore goes InvalidProviderConfig and no
+          # ExternalSecret can refresh.
+          #
+          # Shorter window than the warning above because this is an outage,
+          # not a degradation — but not zero, so a rolling restart that
+          # briefly dips does not page.
+          expr: kube_statefulset_status_replicas_ready{namespace="openbao", statefulset="openbao"} < 2
+          for: 5m
+          labels:
+            severity: critical
+          annotations:
+            summary: "OpenBao below raft quorum — {{ $value }} of 3 replicas ready"
+            description: >-
+              Fewer than two OpenBao replicas are ready, so raft cannot hold
+              quorum and the secret store is unavailable. ExternalSecrets stop
+              refreshing; existing Secrets keep their last values, so failures
+              surface only when something rotates or a new secret is needed.
+              Unseal the sealed replicas (key in `pass`,
+              homelab/openbao/unseal-key) — each one individually, since a
+              sealed server cannot be a standby.
+
+        - alert: OpenBaoMetricsMissing
+          # Guards the two alerts above. Both are threshold comparisons, so if
+          # kube-state-metrics stops exporting this series — the StatefulSet
+          # deleted, the namespace gone, kube-state-metrics itself broken —
+          # they silently stop evaluating and the silence looks identical to
+          # health. This makes that state say something.
+          expr: absent(kube_statefulset_status_replicas_ready{namespace="openbao", statefulset="openbao"})
+          for: 15m
+          labels:
+            severity: warning
+          annotations:
+            summary: "No readiness metric for the OpenBao StatefulSet"
+            description: >-
+              kube-state-metrics has not reported
+              kube_statefulset_status_replicas_ready for the openbao
+              StatefulSet in 15 minutes. Either the StatefulSet is gone or
+              kube-state-metrics is not scraping — and while this is absent,
+              OpenBaoReplicaNotReady and OpenBaoQuorumLost cannot fire at all.
@@ -40,17 +40,31 @@ spec:
            description: "A Velero backup run for {{ $labels.schedule }} completed with Failed or PartiallyFailed status in the last hour. Inspect with `kubectl -n velero get backup.velero.io -l velero.io/schedule-name={{ $labels.schedule }}` and the velero pod logs."

        - alert: VeleroBackupStale
-          # Daily schedule with no successful backup in over 30h: covers
-          # the case where multiple consecutive runs failed (Garage flapping
-          # over the backup window) without the per-event alerts being
-          # acted on.
+          # Daily schedule with no successful backup in over 60h: covers the
+          # case where consecutive runs failed without the per-event alerts
+          # being acted on.
+          #
+          # 60h, not 30h. At 30h a single missed cycle pages, and a single
+          # missed cycle is the normal cost of touching the nodes: Velero moves
+          # data through pods, so draining a node kills whatever upload is in
+          # flight and the schedule is simply lost for that day — it is not
+          # retried. Rolling node work between 03:15 and 08:45 UTC therefore
+          # produced a guaranteed critical alert for every schedule it
+          # overlapped, which is noise about planned work rather than a signal
+          # about backups.
+          #
+          # 60h still catches what this is for. Two consecutive failures is no
+          # longer explicable by one maintenance window, and the per-event
+          # VeleroBackupFailed alert fires on the first failure regardless — so
+          # nothing is hidden, only the escalation to critical is deferred
+          # until a second cycle confirms it.
          expr: |
-            time() - velero_backup_last_successful_timestamp{schedule!=""} > 30 * 3600
+            time() - velero_backup_last_successful_timestamp{schedule!=""} > 60 * 3600
            and
            velero_backup_last_successful_timestamp{schedule!=""} > 0
          for: 10m
          labels:
            severity: critical
          annotations:
-            summary: "Velero {{ $labels.schedule }} has no successful backup in 30h+"
-            description: "Last successful backup for {{ $labels.schedule }} was over 30 hours ago. With a daily schedule that means at least one full cycle missed. RPO is degrading."
+            summary: "Velero {{ $labels.schedule }} has no successful backup in 60h+"
+            description: "Last successful backup for {{ $labels.schedule }} was over 60 hours ago. With a daily schedule that is at least two consecutive cycles missed, which one maintenance window does not explain. RPO is degrading."
@@ -0,0 +1,24 @@
+apiVersion: monitoring.coreos.com/v1
+kind: ServiceMonitor
+metadata:
+  name: smartctl-exporter
+  namespace: monitoring
+  labels:
+    app.kubernetes.io/name: smartctl-exporter
+    # Not required for discovery — serviceMonitorSelector is empty — but kept
+    # for consistency with the other monitors.
+    release: kube-prometheus-stack
+spec:
+  selector:
+    matchLabels:
+      app.kubernetes.io/name: smartctl-exporter
+  endpoints:
+    # smartctl polls the drives every 60s; scraping faster gains nothing.
+    - port: http-metrics
+      path: /metrics
+      interval: 60s
+      relabelings:
+        # Without this a series carries only the exporter pod's IP, which does
+        # not identify the machine the drive is in.
+        - sourceLabels: [__meta_kubernetes_pod_node_name]
+          targetLabel: node
@@ -0,0 +1,475 @@
+{
+  "annotations": {"list": []},
+  "description": "NVMe health and performance per node. The top row answers 'is anything wrong'; the graphs below answer 'why'. Panels resolve each drive through node_nvme_info and node_uname_info rather than plotting the Linux device name, because NVMe enumeration order is not guaranteed to agree across machines — the same name can be a different drive on the next node. Which drive currently holds which role is in the inventory table, deliberately not in this text. Endurance comes from smartctl_exporter, whose series are labelled by node rather than by the exporter pod's IP — see the note at the bottom for what it still cannot tell you.",
+  "editable": true,
+  "fiscalYearStartMonth": 0,
+  "graphTooltip": 1,
+  "id": null,
+  "links": [],
+  "panels": [
+    {
+      "datasource": {"type": "prometheus", "uid": "prometheus"},
+      "description": "Ceph's overall verdict. A HEALTH_WARN is frequently raised by something unrelated to the drives, so read the detail before treating it as a storage problem.",
+      "fieldConfig": {
+        "defaults": {
+          "color": {"mode": "thresholds"},
+          "mappings": [{"options": {"0": {"color": "green", "index": 0, "text": "HEALTH_OK"}, "1": {"color": "orange", "index": 1, "text": "HEALTH_WARN"}, "2": {"color": "red", "index": 2, "text": "HEALTH_ERR"}}, "type": "value"}],
+          "thresholds": {"mode": "absolute", "steps": [{"color": "green", "value": null}, {"color": "orange", "value": 1}, {"color": "red", "value": 2}]},
+          "unit": "short"
+        },
+        "overrides": []
+      },
+      "gridPos": {"h": 4, "w": 5, "x": 0, "y": 0},
+      "id": 10,
+      "options": {"colorMode": "background", "graphMode": "none", "justifyMode": "auto", "orientation": "auto", "reduceOptions": {"calcs": ["lastNotNull"], "fields": "", "values": false}, "textMode": "auto"},
+      "targets": [{"datasource": {"type": "prometheus", "uid": "prometheus"}, "expr": "ceph_health_status", "legendFormat": "", "refId": "A"}],
+      "title": "Ceph health",
+      "type": "stat"
+    },
+    {
+      "datasource": {"type": "prometheus", "uid": "prometheus"},
+      "description": "OSDs the cluster knows about but which are not up. Should read zero. Counted as a difference against ceph_osd_metadata rather than compared to a fixed number, so adding or removing an OSD does not turn this panel into a false alarm. An OSD that is up but out shows as a Ceph health warning instead — it is a state, not a fault, and it does not belong in a red-or-green box.",
+      "fieldConfig": {
+        "defaults": {
+          "color": {"mode": "thresholds"},
+          "mappings": [],
+          "thresholds": {"mode": "absolute", "steps": [{"color": "green", "value": null}, {"color": "red", "value": 1}]},
+          "unit": "short"
+        },
+        "overrides": []
+      },
+      "gridPos": {"h": 4, "w": 5, "x": 5, "y": 0},
+      "id": 11,
+      "options": {"colorMode": "background", "graphMode": "none", "justifyMode": "auto", "orientation": "auto", "reduceOptions": {"calcs": ["lastNotNull"], "fields": "", "values": false}, "textMode": "auto"},
+      "targets": [
+        {"datasource": {"type": "prometheus", "uid": "prometheus"}, "expr": "sum(ceph_osd_metadata) - sum(ceph_osd_up)", "legendFormat": "", "refId": "A"}
+      ],
+      "title": "OSDs down",
+      "type": "stat"
+    },
+    {
+      "datasource": {"type": "prometheus", "uid": "prometheus"},
+      "description": "Raw Ceph capacity in use. The cluster average is the optimistic number: Ceph stops writing when a single OSD crosses the full ratio, so per-OSD headroom is what actually bites.",
+      "fieldConfig": {
+        "defaults": {
+          "color": {"mode": "thresholds"},
+          "mappings": [],
+          "max": 1,
+          "min": 0,
+          "thresholds": {"mode": "absolute", "steps": [{"color": "green", "value": null}, {"color": "orange", "value": 0.75}, {"color": "red", "value": 0.85}]},
+          "unit": "percentunit"
+        },
+        "overrides": []
+      },
+      "gridPos": {"h": 4, "w": 5, "x": 10, "y": 0},
+      "id": 12,
+      "options": {"colorMode": "background", "graphMode": "area", "justifyMode": "auto", "orientation": "auto", "reduceOptions": {"calcs": ["lastNotNull"], "fields": "", "values": false}, "textMode": "auto"},
+      "targets": [{"datasource": {"type": "prometheus", "uid": "prometheus"}, "expr": "ceph_cluster_total_used_bytes / ceph_cluster_total_bytes", "legendFormat": "", "refId": "A"}],
+      "title": "Ceph capacity used",
+      "type": "stat"
+    },
+    {
+      "datasource": {"type": "prometheus", "uid": "prometheus"},
+      "description": "Fullest EPHEMERAL volume across the fleet — Talos's /var. Its contents are meant to be disposable: container images, kubelet state and pod scratch all rebuild. Filling it is still a problem, because a node with no room to write stops being useful long before anything is lost, and nothing rebalances /var the way Ceph rebalances a full OSD.",
+      "fieldConfig": {
+        "defaults": {
+          "color": {"mode": "thresholds"},
+          "mappings": [],
+          "max": 1,
+          "min": 0,
+          "thresholds": {"mode": "absolute", "steps": [{"color": "green", "value": null}, {"color": "orange", "value": 0.7}, {"color": "red", "value": 0.85}]},
+          "unit": "percentunit"
+        },
+        "overrides": []
+      },
+      "gridPos": {"h": 4, "w": 5, "x": 15, "y": 0},
+      "id": 13,
+      "options": {"colorMode": "background", "graphMode": "area", "justifyMode": "auto", "orientation": "auto", "reduceOptions": {"calcs": ["lastNotNull"], "fields": "", "values": false}, "textMode": "auto"},
+      "targets": [{"datasource": {"type": "prometheus", "uid": "prometheus"}, "expr": "max(1 - node_filesystem_avail_bytes{mountpoint=\"/var\"} / node_filesystem_size_bytes{mountpoint=\"/var\"})", "legendFormat": "", "refId": "A"}],
+      "title": "EPHEMERAL used (worst node)",
+      "type": "stat"
+    },
+    {
+      "datasource": {"type": "prometheus", "uid": "prometheus"},
+      "description": "Which physical drive is which, resolved live rather than written down — this table is the answer to 'what is in the machines', so that no panel description has to be. The OSD column is joined from ceph_disk_occupation, so it follows Rook; a drive with no OSD is carrying either the system disk or EPHEMERAL.",
+      "fieldConfig": {
+        "defaults": {
+          "color": {"mode": "thresholds"},
+          "custom": {"align": "auto", "cellOptions": {"type": "auto"}, "inspect": false},
+          "mappings": [],
+          "thresholds": {"mode": "absolute", "steps": [{"color": "text", "value": null}]}
+        },
+        "overrides": []
+      },
+      "gridPos": {"h": 9, "w": 24, "x": 0, "y": 4},
+      "id": 1,
+      "options": {"cellHeight": "sm", "footer": {"countRows": false, "fields": "", "reducer": ["sum"], "show": false}, "showHeader": true, "sortBy": [{"desc": false, "displayName": "node"}]},
+      "targets": [
+        {
+          "datasource": {"type": "prometheus", "uid": "prometheus"},
+          "expr": "(label_replace(node_nvme_info * on (instance) group_left(nodename) node_uname_info, \"nvmedev\", \"$1\", \"device\", \"(nvme[0-9]+)\") * on (nodename, nvmedev) group_left(ceph_daemon) label_replace(label_replace(ceph_disk_occupation, \"nodename\", \"$1\", \"instance\", \"(.*)\"), \"nvmedev\", \"$1\", \"devices\", \"(nvme[0-9]+)n[0-9]+\")) or (label_replace(node_nvme_info * on (instance) group_left(nodename) node_uname_info, \"nvmedev\", \"$1\", \"device\", \"(nvme[0-9]+)\") unless on (nodename, nvmedev) label_replace(label_replace(ceph_disk_occupation, \"nodename\", \"$1\", \"instance\", \"(.*)\"), \"nvmedev\", \"$1\", \"devices\", \"(nvme[0-9]+)n[0-9]+\"))",
+          "format": "table",
+          "instant": true,
+          "legendFormat": "",
+          "refId": "A"
+        }
+      ],
+      "title": "Drive inventory (identity and role)",
+      "transformations": [
+        {
+          "id": "organize",
+          "options": {
+            "excludeByName": {"Time": true, "Value": true, "__name__": true, "cntlid": true, "container": true, "endpoint": true, "instance": true, "job": true, "namespace": true, "pod": true, "service": true, "domainname": true, "machine": true, "release": true, "sysname": true, "version": true, "state": true, "nvmedev": true},
+            "indexByName": {},
+            "renameByName": {"nodename": "node", "device": "device", "model": "model", "serial": "serial", "firmware_revision": "firmware", "ceph_daemon": "ceph OSD"}
+          }
+        }
+      ],
+      "type": "table"
+    },
+    {
+      "datasource": {"type": "prometheus", "uid": "prometheus"},
+      "description": "Rated endurance consumed, worst drive in the fleet. This is the drive's own accounting against what the manufacturer warrants, not a failure prediction — a drive past 100 usually keeps working and starts eating its spare area. Read it for planning; read the SMART table for whether anything is failing now.",
+      "fieldConfig": {
+        "defaults": {
+          "color": {"mode": "thresholds"},
+          "mappings": [],
+          "max": 100,
+          "min": 0,
+          "thresholds": {"mode": "absolute", "steps": [{"color": "green", "value": null}, {"color": "orange", "value": 80}, {"color": "red", "value": 95}]},
+          "unit": "percent"
+        },
+        "overrides": []
+      },
+      "gridPos": {"h": 4, "w": 4, "x": 20, "y": 0},
+      "id": 14,
+      "options": {"colorMode": "background", "graphMode": "area", "justifyMode": "auto", "orientation": "auto", "reduceOptions": {"calcs": ["lastNotNull"], "fields": "", "values": false}, "textMode": "auto"},
+      "targets": [{"datasource": {"type": "prometheus", "uid": "prometheus"}, "expr": "max(smartctl_device_percentage_used)", "legendFormat": "", "refId": "A"}],
+      "title": "Worst NVMe wear",
+      "type": "stat"
+    },
+    {
+      "datasource": {"type": "prometheus", "uid": "prometheus"},
+      "description": "Rated endurance consumed per drive. The line is nearly flat by nature — wear moves on a scale of weeks — so the useful reading is the spread between drives and the slope, not today's value. Joined to smartctl_device for the model name, because the device label alone is not comparable across nodes.",
+      "fieldConfig": {
+        "defaults": {
+          "color": {"mode": "palette-classic"},
+          "custom": {"axisCenteredZero": false, "axisColorMode": "text", "axisPlacement": "auto", "barAlignment": 0, "drawStyle": "line", "fillOpacity": 10, "gradientMode": "none", "hideFrom": {"legend": false, "tooltip": false, "viz": false}, "lineInterpolation": "smooth", "lineWidth": 2, "pointSize": 5, "scaleDistribution": {"type": "linear"}, "showPoints": "never", "spanNulls": false, "stacking": {"group": "A", "mode": "none"}, "thresholdsStyle": {"mode": "dashed"}},
+          "mappings": [],
+          "max": 100,
+          "min": 0,
+          "thresholds": {"mode": "absolute", "steps": [{"color": "green", "value": null}, {"color": "orange", "value": 80}, {"color": "red", "value": 95}]},
+          "unit": "percent"
+        },
+        "overrides": []
+      },
+      "gridPos": {"h": 9, "w": 12, "x": 0, "y": 13},
+      "id": 15,
+      "options": {"legend": {"calcs": ["last"], "displayMode": "table", "placement": "bottom", "showLegend": true}, "tooltip": {"mode": "multi", "sort": "desc"}},
+      "targets": [
+        {
+          "datasource": {"type": "prometheus", "uid": "prometheus"},
+          "expr": "smartctl_device_percentage_used * on (node, device) group_left(model_name) smartctl_device",
+          "legendFormat": "{{node}} {{model_name}}",
+          "refId": "A"
+        }
+      ],
+      "title": "NVMe wear",
+      "type": "timeseries"
+    },
+    {
+      "datasource": {"type": "prometheus", "uid": "prometheus"},
+      "description": "The failure-now signals, as opposed to the endurance budget above. Spare below its threshold means the drive has run out of blocks to remap defects into; media errors are unrecoverable data-integrity failures and should never increment; the critical warning is a bitfield the drive raises itself. Written bytes is the counter behind the wear percentage, useful for projecting when a drive will reach it.",
+      "fieldConfig": {
+        "defaults": {
+          "color": {"mode": "thresholds"},
+          "custom": {"align": "auto", "cellOptions": {"type": "auto"}, "inspect": false},
+          "mappings": [],
+          "thresholds": {"mode": "absolute", "steps": [{"color": "text", "value": null}]}
+        },
+        "overrides": [
+          {"matcher": {"id": "byName", "options": "wear"}, "properties": [{"id": "unit", "value": "percent"}, {"id": "custom.cellOptions", "value": {"type": "color-text"}}, {"id": "thresholds", "value": {"mode": "absolute", "steps": [{"color": "green", "value": null}, {"color": "orange", "value": 80}, {"color": "red", "value": 95}]}}]},
+          {"matcher": {"id": "byName", "options": "spare"}, "properties": [{"id": "unit", "value": "percent"}]},
+          {"matcher": {"id": "byName", "options": "media errors"}, "properties": [{"id": "custom.cellOptions", "value": {"type": "color-text"}}, {"id": "thresholds", "value": {"mode": "absolute", "steps": [{"color": "green", "value": null}, {"color": "red", "value": 1}]}}]},
+          {"matcher": {"id": "byName", "options": "critical warning"}, "properties": [{"id": "custom.cellOptions", "value": {"type": "color-text"}}, {"id": "thresholds", "value": {"mode": "absolute", "steps": [{"color": "green", "value": null}, {"color": "red", "value": 1}]}}]},
+          {"matcher": {"id": "byName", "options": "powered on"}, "properties": [{"id": "unit", "value": "s"}]},
+          {"matcher": {"id": "byName", "options": "written"}, "properties": [{"id": "unit", "value": "bytes"}]}
+        ]
+      },
+      "gridPos": {"h": 9, "w": 12, "x": 12, "y": 13},
+      "id": 16,
+      "options": {"cellHeight": "sm", "footer": {"countRows": false, "fields": "", "reducer": ["sum"], "show": false}, "showHeader": true, "sortBy": [{"desc": true, "displayName": "wear"}]},
+      "targets": [
+        {"datasource": {"type": "prometheus", "uid": "prometheus"}, "expr": "smartctl_device_percentage_used * on (node, device) group_left(model_name) smartctl_device", "format": "table", "instant": true, "refId": "A"},
+        {"datasource": {"type": "prometheus", "uid": "prometheus"}, "expr": "smartctl_device_available_spare * on (node, device) group_left(model_name) smartctl_device", "format": "table", "instant": true, "refId": "B"},
+        {"datasource": {"type": "prometheus", "uid": "prometheus"}, "expr": "smartctl_device_media_errors * on (node, device) group_left(model_name) smartctl_device", "format": "table", "instant": true, "refId": "C"},
+        {"datasource": {"type": "prometheus", "uid": "prometheus"}, "expr": "smartctl_device_critical_warning * on (node, device) group_left(model_name) smartctl_device", "format": "table", "instant": true, "refId": "D"},
+        {"datasource": {"type": "prometheus", "uid": "prometheus"}, "expr": "smartctl_device_power_on_seconds * on (node, device) group_left(model_name) smartctl_device", "format": "table", "instant": true, "refId": "E"},
+        {"datasource": {"type": "prometheus", "uid": "prometheus"}, "expr": "smartctl_device_bytes_written * on (node, device) group_left(model_name) smartctl_device", "format": "table", "instant": true, "refId": "F"}
+      ],
+      "title": "SMART health",
+      "transformations": [
+        {"id": "merge", "options": {}},
+        {
+          "id": "organize",
+          "options": {
+            "excludeByName": {"Time": true, "__name__": true, "container": true, "endpoint": true, "instance": true, "job": true, "namespace": true, "pod": true, "service": true},
+            "indexByName": {},
+            "renameByName": {"node": "node", "device": "device", "model_name": "model", "Value #A": "wear", "Value #B": "spare", "Value #C": "media errors", "Value #D": "critical warning", "Value #E": "powered on", "Value #F": "written"}
+          }
+        }
+      ],
+      "type": "table"
+    },
+    {
+      "datasource": {"type": "prometheus", "uid": "prometheus"},
+      "description": "Read and write throughput per drive.",
+      "fieldConfig": {
+        "defaults": {
+          "color": {"mode": "palette-classic"},
+          "custom": {"axisCenteredZero": false, "axisColorMode": "text", "axisPlacement": "auto", "barAlignment": 0, "drawStyle": "line", "fillOpacity": 10, "gradientMode": "none", "hideFrom": {"legend": false, "tooltip": false, "viz": false}, "lineInterpolation": "smooth", "lineWidth": 2, "pointSize": 5, "scaleDistribution": {"type": "linear"}, "showPoints": "never", "spanNulls": false, "stacking": {"group": "A", "mode": "none"}, "thresholdsStyle": {"mode": "off"}},
+          "mappings": [],
+          "thresholds": {"mode": "absolute", "steps": [{"color": "green", "value": null}]},
+          "unit": "Bps"
+        },
+        "overrides": []
+      },
+      "gridPos": {"h": 9, "w": 12, "x": 0, "y": 22},
+      "id": 2,
+      "options": {"legend": {"calcs": ["mean", "max"], "displayMode": "table", "placement": "bottom", "showLegend": true}, "tooltip": {"mode": "multi", "sort": "desc"}},
+      "targets": [
+        {
+          "datasource": {"type": "prometheus", "uid": "prometheus"},
+          "expr": "label_replace(rate(node_disk_read_bytes_total{device=~\"nvme[0-9]+n[0-9]+\"}[$__rate_interval]), \"nvmedev\", \"$1\", \"device\", \"(nvme[0-9]+)n[0-9]+\") * on (instance, nvmedev) group_left(model) label_replace(node_nvme_info, \"nvmedev\", \"$1\", \"device\", \"(nvme[0-9]+)\") * on (instance) group_left(nodename) node_uname_info",
+          "legendFormat": "read {{nodename}} {{model}}",
+          "refId": "A"
+        },
+        {
+          "datasource": {"type": "prometheus", "uid": "prometheus"},
+          "expr": "label_replace(rate(node_disk_written_bytes_total{device=~\"nvme[0-9]+n[0-9]+\"}[$__rate_interval]), \"nvmedev\", \"$1\", \"device\", \"(nvme[0-9]+)n[0-9]+\") * on (instance, nvmedev) group_left(model) label_replace(node_nvme_info, \"nvmedev\", \"$1\", \"device\", \"(nvme[0-9]+)\") * on (instance) group_left(nodename) node_uname_info",
+          "legendFormat": "write {{nodename}} {{model}}",
+          "refId": "B"
+        }
+      ],
+      "title": "Throughput",
+      "type": "timeseries"
+    },
+    {
+      "datasource": {"type": "prometheus", "uid": "prometheus"},
+      "description": "Completed operations per second. Read together with throughput this separates many small operations from few large ones.",
+      "fieldConfig": {
+        "defaults": {
+          "color": {"mode": "palette-classic"},
+          "custom": {"axisCenteredZero": false, "axisColorMode": "text", "axisPlacement": "auto", "barAlignment": 0, "drawStyle": "line", "fillOpacity": 10, "gradientMode": "none", "hideFrom": {"legend": false, "tooltip": false, "viz": false}, "lineInterpolation": "smooth", "lineWidth": 2, "pointSize": 5, "scaleDistribution": {"type": "linear"}, "showPoints": "never", "spanNulls": false, "stacking": {"group": "A", "mode": "none"}, "thresholdsStyle": {"mode": "off"}},
+          "mappings": [],
+          "thresholds": {"mode": "absolute", "steps": [{"color": "green", "value": null}]},
+          "unit": "iops"
+        },
+        "overrides": []
+      },
+      "gridPos": {"h": 9, "w": 12, "x": 12, "y": 22},
+      "id": 3,
+      "options": {"legend": {"calcs": ["mean", "max"], "displayMode": "table", "placement": "bottom", "showLegend": true}, "tooltip": {"mode": "multi", "sort": "desc"}},
+      "targets": [
+        {
+          "datasource": {"type": "prometheus", "uid": "prometheus"},
+          "expr": "label_replace(rate(node_disk_reads_completed_total{device=~\"nvme[0-9]+n[0-9]+\"}[$__rate_interval]), \"nvmedev\", \"$1\", \"device\", \"(nvme[0-9]+)n[0-9]+\") * on (instance, nvmedev) group_left(model) label_replace(node_nvme_info, \"nvmedev\", \"$1\", \"device\", \"(nvme[0-9]+)\") * on (instance) group_left(nodename) node_uname_info",
+          "legendFormat": "read {{nodename}} {{model}}",
+          "refId": "A"
+        },
+        {
+          "datasource": {"type": "prometheus", "uid": "prometheus"},
+          "expr": "label_replace(rate(node_disk_writes_completed_total{device=~\"nvme[0-9]+n[0-9]+\"}[$__rate_interval]), \"nvmedev\", \"$1\", \"device\", \"(nvme[0-9]+)n[0-9]+\") * on (instance, nvmedev) group_left(model) label_replace(node_nvme_info, \"nvmedev\", \"$1\", \"device\", \"(nvme[0-9]+)\") * on (instance) group_left(nodename) node_uname_info",
+          "legendFormat": "write {{nodename}} {{model}}",
+          "refId": "B"
+        }
+      ],
+      "title": "IOPS",
+      "type": "timeseries"
+    },
+    {
+      "datasource": {"type": "prometheus", "uid": "prometheus"},
+      "description": "Mean service time per operation, derived as accumulated time divided by completed operations. This is an average and will not show a tail — a drive can look healthy here while a small fraction of operations stall. The line disappears while a device is idle, because the denominator is zero; that is absence of traffic, not absence of a problem.",
+      "fieldConfig": {
+        "defaults": {
+          "color": {"mode": "palette-classic"},
+          "custom": {"axisCenteredZero": false, "axisColorMode": "text", "axisPlacement": "auto", "barAlignment": 0, "drawStyle": "line", "fillOpacity": 10, "gradientMode": "none", "hideFrom": {"legend": false, "tooltip": false, "viz": false}, "lineInterpolation": "smooth", "lineWidth": 2, "pointSize": 5, "scaleDistribution": {"type": "linear"}, "showPoints": "never", "spanNulls": false, "stacking": {"group": "A", "mode": "none"}, "thresholdsStyle": {"mode": "off"}},
+          "mappings": [],
+          "thresholds": {"mode": "absolute", "steps": [{"color": "green", "value": null}]},
+          "unit": "s"
+        },
+        "overrides": []
+      },
+      "gridPos": {"h": 9, "w": 12, "x": 0, "y": 31},
+      "id": 4,
+      "options": {"legend": {"calcs": ["mean", "max"], "displayMode": "table", "placement": "bottom", "showLegend": true}, "tooltip": {"mode": "multi", "sort": "desc"}},
+      "targets": [
+        {
+          "datasource": {"type": "prometheus", "uid": "prometheus"},
+          "expr": "label_replace(rate(node_disk_read_time_seconds_total{device=~\"nvme[0-9]+n[0-9]+\"}[$__rate_interval]) / rate(node_disk_reads_completed_total{device=~\"nvme[0-9]+n[0-9]+\"}[$__rate_interval]), \"nvmedev\", \"$1\", \"device\", \"(nvme[0-9]+)n[0-9]+\") * on (instance, nvmedev) group_left(model) label_replace(node_nvme_info, \"nvmedev\", \"$1\", \"device\", \"(nvme[0-9]+)\") * on (instance) group_left(nodename) node_uname_info",
+          "legendFormat": "read {{nodename}} {{model}}",
+          "refId": "A"
+        },
+        {
+          "datasource": {"type": "prometheus", "uid": "prometheus"},
+          "expr": "label_replace(rate(node_disk_write_time_seconds_total{device=~\"nvme[0-9]+n[0-9]+\"}[$__rate_interval]) / rate(node_disk_writes_completed_total{device=~\"nvme[0-9]+n[0-9]+\"}[$__rate_interval]), \"nvmedev\", \"$1\", \"device\", \"(nvme[0-9]+)n[0-9]+\") * on (instance, nvmedev) group_left(model) label_replace(node_nvme_info, \"nvmedev\", \"$1\", \"device\", \"(nvme[0-9]+)\") * on (instance) group_left(nodename) node_uname_info",
+          "legendFormat": "write {{nodename}} {{model}}",
+          "refId": "B"
+        }
+      ],
+      "title": "Mean operation latency",
+      "type": "timeseries"
+    },
+    {
+      "datasource": {"type": "prometheus", "uid": "prometheus"},
+      "description": "Fraction of wall-clock time the device had at least one operation in flight, and the number of operations queued. Utilisation near 100% on an NVMe drive does not mean saturation the way it does on a spindle — these devices serve many operations in parallel — so read it alongside the queue depth.",
+      "fieldConfig": {
+        "defaults": {
+          "color": {"mode": "palette-classic"},
+          "custom": {"axisCenteredZero": false, "axisColorMode": "text", "axisPlacement": "auto", "barAlignment": 0, "drawStyle": "line", "fillOpacity": 10, "gradientMode": "none", "hideFrom": {"legend": false, "tooltip": false, "viz": false}, "lineInterpolation": "smooth", "lineWidth": 2, "pointSize": 5, "scaleDistribution": {"type": "linear"}, "showPoints": "never", "spanNulls": false, "stacking": {"group": "A", "mode": "none"}, "thresholdsStyle": {"mode": "off"}},
+          "mappings": [],
+          "thresholds": {"mode": "absolute", "steps": [{"color": "green", "value": null}]},
+          "unit": "percentunit"
+        },
+        "overrides": [
+          {
+            "matcher": {"id": "byRegexp", "options": "queue .*"},
+            "properties": [{"id": "unit", "value": "short"}, {"id": "custom.axisPlacement", "value": "right"}]
+          }
+        ]
+      },
+      "gridPos": {"h": 9, "w": 12, "x": 12, "y": 31},
+      "id": 5,
+      "options": {"legend": {"calcs": ["mean", "max"], "displayMode": "table", "placement": "bottom", "showLegend": true}, "tooltip": {"mode": "multi", "sort": "desc"}},
+      "targets": [
+        {
+          "datasource": {"type": "prometheus", "uid": "prometheus"},
+          "expr": "label_replace(rate(node_disk_io_time_seconds_total{device=~\"nvme[0-9]+n[0-9]+\"}[$__rate_interval]), \"nvmedev\", \"$1\", \"device\", \"(nvme[0-9]+)n[0-9]+\") * on (instance, nvmedev) group_left(model) label_replace(node_nvme_info, \"nvmedev\", \"$1\", \"device\", \"(nvme[0-9]+)\") * on (instance) group_left(nodename) node_uname_info",
+          "legendFormat": "busy {{nodename}} {{model}}",
+          "refId": "A"
+        },
+        {
+          "datasource": {"type": "prometheus", "uid": "prometheus"},
+          "expr": "label_replace(node_disk_io_now{device=~\"nvme[0-9]+n[0-9]+\"}, \"nvmedev\", \"$1\", \"device\", \"(nvme[0-9]+)n[0-9]+\") * on (instance, nvmedev) group_left(model) label_replace(node_nvme_info, \"nvmedev\", \"$1\", \"device\", \"(nvme[0-9]+)\") * on (instance) group_left(nodename) node_uname_info",
+          "legendFormat": "queue {{nodename}} {{model}}",
+          "refId": "B"
+        }
+      ],
+      "title": "Utilisation and queue depth",
+      "type": "timeseries"
+    },
+    {
+      "datasource": {"type": "prometheus", "uid": "prometheus"},
+      "description": "Composite temperature reported by each controller, read from hwmon in sysfs. This is the one health value available without an admin ioctl, which is why it is the only SMART-adjacent series on this dashboard. The thresholds are generic NVMe limits rather than any particular drive's rating — check the datasheet before treating a crossing as urgent.",
+      "fieldConfig": {
+        "defaults": {
+          "color": {"mode": "palette-classic"},
+          "custom": {"axisCenteredZero": false, "axisColorMode": "text", "axisPlacement": "auto", "barAlignment": 0, "drawStyle": "line", "fillOpacity": 10, "gradientMode": "none", "hideFrom": {"legend": false, "tooltip": false, "viz": false}, "lineInterpolation": "smooth", "lineWidth": 2, "pointSize": 5, "scaleDistribution": {"type": "linear"}, "showPoints": "never", "spanNulls": false, "stacking": {"group": "A", "mode": "none"}, "thresholdsStyle": {"mode": "dashed"}},
+          "mappings": [],
+          "thresholds": {"mode": "absolute", "steps": [{"color": "green", "value": null}, {"color": "orange", "value": 70}, {"color": "red", "value": 80}]},
+          "unit": "celsius"
+        },
+        "overrides": []
+      },
+      "gridPos": {"h": 9, "w": 12, "x": 0, "y": 40},
+      "id": 6,
+      "options": {"legend": {"calcs": ["mean", "max"], "displayMode": "table", "placement": "bottom", "showLegend": true}, "tooltip": {"mode": "multi", "sort": "desc"}},
+      "targets": [
+        {
+          "datasource": {"type": "prometheus", "uid": "prometheus"},
+          "expr": "label_replace(node_hwmon_temp_celsius{chip=~\"nvme_nvme[0-9]+\", sensor=\"temp1\"}, \"nvmedev\", \"$1\", \"chip\", \"nvme_(nvme[0-9]+)\") * on (instance, nvmedev) group_left(model) label_replace(node_nvme_info, \"nvmedev\", \"$1\", \"device\", \"(nvme[0-9]+)\") * on (instance) group_left(nodename) node_uname_info",
+          "legendFormat": "{{nodename}} {{model}}",
+          "refId": "A"
+        }
+      ],
+      "title": "Controller temperature",
+      "type": "timeseries"
+    },
+    {
+      "datasource": {"type": "prometheus", "uid": "prometheus"},
+      "description": "Ceph's own view of the OSDs, for comparison with the block-layer numbers above. A divergence between these and the device latency is the interesting case: it points at Ceph rather than at the hardware.",
+      "fieldConfig": {
+        "defaults": {
+          "color": {"mode": "palette-classic"},
+          "custom": {"axisCenteredZero": false, "axisColorMode": "text", "axisPlacement": "auto", "barAlignment": 0, "drawStyle": "line", "fillOpacity": 10, "gradientMode": "none", "hideFrom": {"legend": false, "tooltip": false, "viz": false}, "lineInterpolation": "smooth", "lineWidth": 2, "pointSize": 5, "scaleDistribution": {"type": "linear"}, "showPoints": "never", "spanNulls": false, "stacking": {"group": "A", "mode": "none"}, "thresholdsStyle": {"mode": "off"}},
+          "mappings": [],
+          "thresholds": {"mode": "absolute", "steps": [{"color": "green", "value": null}]},
+          "unit": "ms"
+        },
+        "overrides": []
+      },
+      "gridPos": {"h": 9, "w": 12, "x": 12, "y": 40},
+      "id": 7,
+      "options": {"legend": {"calcs": ["mean", "max"], "displayMode": "table", "placement": "bottom", "showLegend": true}, "tooltip": {"mode": "multi", "sort": "desc"}},
+      "targets": [
+        {
+          "datasource": {"type": "prometheus", "uid": "prometheus"},
+          "expr": "ceph_osd_apply_latency_ms",
+          "legendFormat": "apply {{ceph_daemon}}",
+          "refId": "A"
+        },
+        {
+          "datasource": {"type": "prometheus", "uid": "prometheus"},
+          "expr": "ceph_osd_commit_latency_ms",
+          "legendFormat": "commit {{ceph_daemon}}",
+          "refId": "B"
+        }
+      ],
+      "title": "Ceph OSD latency",
+      "type": "timeseries"
+    },
+    {
+      "datasource": {"type": "prometheus", "uid": "prometheus"},
+      "description": "EPHEMERAL fill level per node. Growth here is usually container images and pod scratch space rather than anything Ceph does.",
+      "fieldConfig": {
+        "defaults": {
+          "color": {"mode": "palette-classic"},
+          "custom": {"axisCenteredZero": false, "axisColorMode": "text", "axisPlacement": "auto", "barAlignment": 0, "drawStyle": "line", "fillOpacity": 10, "gradientMode": "none", "hideFrom": {"legend": false, "tooltip": false, "viz": false}, "lineInterpolation": "smooth", "lineWidth": 2, "pointSize": 5, "scaleDistribution": {"type": "linear"}, "showPoints": "never", "spanNulls": false, "stacking": {"group": "A", "mode": "none"}, "thresholdsStyle": {"mode": "dashed"}},
+          "mappings": [],
+          "max": 1,
+          "min": 0,
+          "thresholds": {"mode": "absolute", "steps": [{"color": "green", "value": null}, {"color": "orange", "value": 0.7}, {"color": "red", "value": 0.85}]},
+          "unit": "percentunit"
+        },
+        "overrides": []
+      },
+      "gridPos": {"h": 8, "w": 24, "x": 0, "y": 49},
+      "id": 9,
+      "options": {"legend": {"calcs": ["last", "max"], "displayMode": "table", "placement": "bottom", "showLegend": true}, "tooltip": {"mode": "multi", "sort": "desc"}},
+      "targets": [
+        {
+          "datasource": {"type": "prometheus", "uid": "prometheus"},
+          "expr": "(1 - node_filesystem_avail_bytes{mountpoint=\"/var\"} / node_filesystem_size_bytes{mountpoint=\"/var\"}) * on (instance) group_left(nodename) node_uname_info",
+          "legendFormat": "{{nodename}} /var",
+          "refId": "A"
+        }
+      ],
+      "title": "EPHEMERAL usage",
+      "type": "timeseries"
+    },
+    {
+      "datasource": {"type": "prometheus", "uid": "prometheus"},
+      "gridPos": {"h": 11, "w": 24, "x": 0, "y": 57},
+      "id": 8,
+      "options": {
+        "code": {"language": "plaintext", "showLineNumbers": false, "showMiniMap": false},
+        "content": "### What this dashboard cannot tell you\n\nThese notes are about mechanisms, not about the drives currently fitted. The inventory table above is the live answer to what is in the machines; nothing here restates it, because prose does not get re-read when hardware is swapped.\n\n**Wear is a budget, not a prediction.** The percentage is what the drive reports against its own rated endurance. Drives do not stop at 100 — they usually keep working and start consuming spare blocks — so read it for planning, and read available spare and media errors for whether something is failing now. Those are different questions and the alert rules treat them as such.\n\n**A green top row is not a healthy drive.** Endurance says nothing about the drive that dies of a controller fault tomorrow, and this dashboard cannot see one coming.\n\nCeph keeps its own wear figures for OSDs in the devicehealth module, which is a useful cross-check but covers OSDs only: `kubectl -n rook-ceph exec deploy/rook-ceph-tools -- ceph device ls`. A drive removed from Ceph is purged from that registry and its history goes with it.\n\n**Roles are assigned in configuration, not by device name.** Talos selects the system disk and the EPHEMERAL volume by serial, Rook selects the OSD by `/dev/disk/by-id` path. Two consequences outlive any particular set of drives: a broad selector such as `disk.transport == 'nvme'` matches every drive in the box, with the installer taking the OSD as the failure mode — and a drive retired from Ceph is not necessarily out of service, and putting a worn one on EPHEMERAL is a sensible destination rather than a hazard — that volume is built to be rebuilt. Check the inventory table for what a given drive holds before reading its wear as urgent.\n\n**A dying NVMe here hangs rather than errors.** Talos boots with `nvme_core.io_timeout=4294967295`, so NVMe commands never time out. Expect a stall, not an I/O error, and expect the latency panel to go flat rather than spike.\n\n**Kernel messages are not retained.** Talos kernel logs do not reach Loki — the only log jobs are Kubernetes pods and a systemd-journal from elsewhere. `talosctl -n <node> dmesg` is the only source, it is a ring buffer, and a reboot empties it. An NVMe error from before the last reboot left no trace anywhere.",
+        "mode": "markdown"
+      },
+      "title": "Gaps and caveats",
+      "type": "text"
+    }
+  ],
+  "preload": false,
+  "refresh": "1m",
+  "schemaVersion": 39,
+  "tags": ["storage", "nvme", "ceph"],
+  "templating": {"list": []},
+  "time": {"from": "now-6h", "to": "now"},
+  "timepicker": {},
+  "timezone": "",
+  "title": "Disk Health",
+  "uid": "disk-health",
+  "version": 1,
+  "weekStart": ""
+}
@@ -7,9 +7,12 @@ namespace: monitoring
 # the kube-prometheus-stack Grafana sidecar watches for.
 #
 # To add a dashboard:
-#   1. Copy the ported JSON to this directory as <name>.json
+#   1. Copy the JSON to this directory as <name>.json
 #   2. Add a configMapGenerator entry below referencing the file
-#   3. Tick off the row in ../DASHBOARD-MIGRATION.md
+#
+# There used to be a third step, ticking a row off ../DASHBOARD-MIGRATION.md.
+# That file no longer exists anywhere in the repo — the port it tracked is
+# finished — so following the instruction was impossible.
 #
 # Dashboard datasource UIDs must match K8s Grafana datasources:
 #   - prometheus  (kube-prom-stack default, in-cluster)
@@ -35,6 +38,9 @@ configMapGenerator:
  - name: dashboard-blackbox-overview
    files:
      - blackbox-overview.json
+  - name: dashboard-disk-health
+    files:
+      - disk-health.json
  - name: dashboard-gitea-overview
    files:
      - gitea-overview.json
@@ -24,8 +24,10 @@ spec:
      enabled: true
      defaults:
        labels:
-          # Required for kube-prometheus-stack's Prometheus to pick up
-          # this ServiceMonitor (its selector matches release).
+          # Not required for discovery — serviceMonitorSelector is empty — but
+          # kept for consistency with the other monitors. The Probes in
+          # monitoring-rules/probes-blackbox.yaml do need it; probeSelector
+          # still matches on release.
          release: kube-prometheus-stack
        interval: 30s
    # Helm DOES deep-merge this map with the chart's default (that is why
@@ -56,26 +56,21 @@ spec:
        #
        # By default kube-prometheus-stack sets these selectors to
        # `matchLabels: {release: kube-prometheus-stack}`. ServiceMonitors
-        # created at RUNTIME by third-party operators carry that operator's own
-        # labels instead and can never be made to match — no static manifest or
-        # Kustomize patch can relabel an object the operator creates itself.
+        # created at RUNTIME by third-party operators — Rook, goauthentik.io —
+        # carry that operator's own labels instead and can never be made to
+        # match: no static manifest or Kustomize patch can relabel an object
+        # the operator creates itself. Left strict, those targets are dropped
+        # silently, with no failed resource and no gap visible anywhere except
+        # in the missing series.
        #
-        # This was silently dropping 12 of 30 ServiceMonitors (2026-07-27):
-        #   rook-ceph/rook-ceph-mgr, rook-ceph/rook-ceph-exporter  (team: rook)
-        #   authentik/ak-outpost-*  x10                            (goauthentik.io/...)
-        # Consequence: ZERO `ceph_*` series existed in Prometheus for all 79
-        # days of the cluster's life — the entire storage layer had no
-        # telemetry, no history, and any Ceph alerting rule would have had
-        # nothing to fire on. The Rook side is the reason this was found; the
-        # authentik outpost targets come along with it.
+        # Because these two are empty, the `release` label on this repo's own
+        # ServiceMonitors and PodMonitors is decorative. It is still set for
+        # consistency, and the comments there say so.
        #
-        # This is the ServiceMonitor twin of the trap already documented for
-        # rules in monitoring-rules/prometheusrule-velero.yaml ("without this
-        # label the rule is created but never loaded").
-        #
-        # ruleSelector is deliberately NOT loosened: this repo's PrometheusRules
-        # all carry `release: kube-prometheus-stack` on purpose, and keeping
-        # that selector strict stops a stray third-party rule from firing here.
+        # ruleSelector, probeSelector and scrapeConfigSelector are deliberately
+        # NOT loosened: nothing outside this repo creates those, so keeping the
+        # selectors strict stops a stray third-party rule from firing here. For
+        # PrometheusRules and Probes the label IS required.
        serviceMonitorSelectorNilUsesHelmValues: false
        podMonitorSelectorNilUsesHelmValues: false
        # Rewrites the in-cluster URL embedded in alert generatorURLs and
@@ -275,8 +270,11 @@ spec:
          - alertmanager-smtp
      # SMTP via Proton submission (smtp.protonmail.ch:587 STARTTLS).
      # The Proton SMTP token is a per-account credential generated in
-      # the Proton webapp (Settings -> IMAP/SMTP) and lives in the
-      # alertmanager-smtp SOPS-encrypted Secret. Outbound 587 from the
+      # the Proton webapp (Settings -> IMAP/SMTP). It is stored in
+      # OpenBao at apps/monitoring/alertmanager-smtp and projected into
+      # the alertmanager-smtp Secret by
+      # ./alertmanager-smtp-externalsecret.yaml — rotating the token
+      # means updating OpenBao, not this repo. Outbound 587 from the
      # monitoring ns is not blocked by any CNP today.
      config:
        global:
@@ -15,6 +15,7 @@ resources:
  - prometheus-gate-service.yaml
  - prometheus-gate-ingress.yaml
  - ci-diagnostics-rbac.yaml
+  - smartctl-exporter.yaml
  - dashboards/
 # prometheusrule-garage.yaml lives in ./monitoring-rules/ and is applied by a
 # separate Flux Kustomization that dependsOn `monitoring` — otherwise the
@@ -0,0 +1,89 @@
+# SMART/endurance metrics for every NVMe drive in the fleet (#549).
+#
+# Runs privileged: host device access is gated by the container device cgroup,
+# and Kubernetes offers no per-device allowlist. Narrower settings do not work;
+# the alternatives that were tried are in the commit history.
+apiVersion: apps/v1
+kind: DaemonSet
+metadata:
+  name: smartctl-exporter
+  namespace: monitoring
+  labels:
+    app.kubernetes.io/name: smartctl-exporter
+spec:
+  selector:
+    matchLabels:
+      app.kubernetes.io/name: smartctl-exporter
+  template:
+    metadata:
+      labels:
+        app.kubernetes.io/name: smartctl-exporter
+    spec:
+      # Control planes are also the storage nodes here, so the exporter has to
+      # tolerate the control-plane taint or it would cover nothing at all.
+      tolerations:
+        - key: node-role.kubernetes.io/control-plane
+          operator: Exists
+          effect: NoSchedule
+      containers:
+        - name: smartctl-exporter
+          image: quay.io/prometheuscommunity/smartctl-exporter:v0.14.0
+          # No --smartctl.device: the exporter scans and rescans on its own.
+          # Device names are not stable across these machines.
+          args:
+            - --web.listen-address=:9633
+          ports:
+            - name: http-metrics
+              containerPort: 9633
+              protocol: TCP
+          securityContext:
+            runAsUser: 0
+            runAsNonRoot: false
+            privileged: true
+            # The API rejects privileged together with
+            # allowPrivilegeEscalation: false.
+            allowPrivilegeEscalation: true
+            readOnlyRootFilesystem: true
+          volumeMounts:
+            # Not read-only: smartmontools opens NVMe devices read-write.
+            - name: dev
+              mountPath: /dev
+            # Scratch space, because the root filesystem is read-only.
+            - name: tmp
+              mountPath: /tmp
+          resources:
+            requests:
+              cpu: 10m
+              memory: 32Mi
+            limits:
+              memory: 128Mi
+          livenessProbe:
+            httpGet:
+              path: /metrics
+              port: http-metrics
+            initialDelaySeconds: 15
+            periodSeconds: 30
+      volumes:
+        - name: dev
+          hostPath:
+            path: /dev
+            type: Directory
+        - name: tmp
+          emptyDir: {}
+---
+apiVersion: v1
+kind: Service
+metadata:
+  name: smartctl-exporter
+  namespace: monitoring
+  labels:
+    app.kubernetes.io/name: smartctl-exporter
+spec:
+  clusterIP: None
+  selector:
+    app.kubernetes.io/name: smartctl-exporter
+  ports:
+    - name: http-metrics
+      port: 9633
+      targetPort: http-metrics
+      protocol: TCP
@@ -55,7 +55,7 @@ spec:
        # stdlib only; Flux keeps the tag in lockstep via the shared image
        # policy) — no extra dependency.
        - name: reconcile-publish-ip
-          image: ghcr.io/music-assistant/server:2.9.13 # {"$imagepolicy": "flux-system:music-assistant"}
+          image: ghcr.io/music-assistant/server:2.10.0 # {"$imagepolicy": "flux-system:music-assistant"}
          command: ["/app/venv/bin/python", "/scripts/reconcile.py"]
          volumeMounts:
            - name: data
@@ -65,7 +65,7 @@ spec:
              readOnly: true
      containers:
        - name: music-assistant
-          image: ghcr.io/music-assistant/server:2.9.13 # {"$imagepolicy": "flux-system:music-assistant"}
+          image: ghcr.io/music-assistant/server:2.10.0 # {"$imagepolicy": "flux-system:music-assistant"}
          env:
            - name: LOG_LEVEL
              value: info
@@ -24,6 +24,22 @@ spec:
            - name: wyoming
              containerPort: 10400
              protocol: TCP
+          # Wyoming is raw TCP with no HTTP surface and no health verb, so
+          # accepting a connection is all that can be asserted from outside the
+          # process. Weaker than an HTTP probe, but the previous state was none
+          # at all: a dead server stayed Ready and kept being routed to.
+          livenessProbe:
+            tcpSocket:
+              port: wyoming
+            initialDelaySeconds: 60
+            periodSeconds: 30
+            timeoutSeconds: 5
+          readinessProbe:
+            tcpSocket:
+              port: wyoming
+            initialDelaySeconds: 15
+            periodSeconds: 10
+            timeoutSeconds: 5
          resources:
            requests:
              cpu: 100m
@@ -5,25 +5,15 @@ metadata:
  labels:
    app.kubernetes.io/name: otbr
 spec:
-  # Disabled 2026-07-11 (replicas: 0) after otbr broke Matter.
+  # DISABLED (replicas: 0). Running otbr broke Matter: its radio is RF-isolated
+  # enough from the Nest mesh that it forms a rival partition of the same
+  # network, and the two bridge only over Ethernet — fast enough for a ping,
+  # too slow for the fragmented CASE handshake, so devices stay discoverable
+  # while every commissioning attempt times out.
  #
-  # otbr is seeded with the Nest network's dataset so it should join the
-  # existing partition as an additive co-BR. In practice it does not merge
-  # cleanly: its SLZB-06 radio is RF-isolated enough from the Nest mesh that
-  # otbr elects itself leader of a rival partition (or the network re-addresses
-  # under a new OMR prefix, observed fd5f -> fdd5). The two same-network
-  # partitions then bridge only over the Ethernet backbone, which carries a
-  # ping but is too slow for the large fragmented CASE handshake -- every
-  # Matter device stays mDNS-discoverable while CASE times out. Removing otbr
-  # re-merges the mesh onto the Nest hubs and Matter recovers.
-  #
-  # This is NOT a diagnosis of a specific config bug: the DHCP/sbr routing
-  # changes (19a4482, df61407) were investigated and matter-server's IPv6 path
-  # to the mesh works (reaches devices, ping ok); sbr's v6 table 100 is an
-  # inert orphan and otbr's eth0 default is outranked by net1's pref-high RA
-  # default. The instability is at the Thread partition layer. Re-enable only
-  # after the co-BR integration is verified to MERGE (one partition, one OMR,
-  # otbr's router table shows the Nest routers) instead of split.
+  # The instability is at the Thread partition layer, not in the config below.
+  # Re-enable only once co-BR integration is verified to MERGE: one partition,
+  # one OMR prefix, and the Nest routers visible in otbr's router table.
  replicas: 0
  strategy:
    type: Recreate
@@ -46,25 +36,17 @@ spec:
      # (slzb-thread.renner.uno). Dropping the workload-class=pinned
      # toleration lets the edge taint keep it off the tiny edge box.
      containers:
-        # The Thread RCP lives on a SLZB-06 over Ethernet at
-        # slzb-thread.renner.uno:6638 (Serial-over-IP). otbr-agent's
-        # spinel transport supports `spinel+hdlc+forkpty://<exec>?<args>`
-        # which forks an exec whose stdio becomes the spinel-HDLC
-        # transport, but the upstream openthread/otbr image does NOT
-        # ship socat (or any TCP-stream tool), so that URL form ends in
-        # silent ENOENT and otbr-agent dies right after logging the
-        # radio URL.
+        # The Thread RCP is a network-attached radio (Serial-over-IP), so the
+        # spinel transport needs a TCP-to-PTY bridge. Two obvious approaches
+        # do not work and should not be retried:
        #
-        # A sidecar socat won't work either: each container has its own
-        # devpts namespace, so a PTY (e.g. /dev/pts/0) created in a
-        # sibling container is invisible from this container — a shared
-        # emptyDir symlink to /dev/pts/0 is dangling.
+        #   - `spinel+hdlc+forkpty://` needs socat, which the upstream image
+        #     does not ship; the URL fails with a silent ENOENT and otbr-agent
+        #     dies right after logging it.
+        #   - A sidecar cannot provide it either: devpts is per-container, so
+        #     a PTY created next door is invisible here and the symlink dangles.
        #
-        # The bridge has to live in the otbr container's own namespace.
-        # Install socat at startup via apt (Ubuntu 18.04 base, no egress
-        # restrictions on this namespace), run it in the background as
-        # the spinel-HDLC TCP↔PTY bridge, then exec the upstream
-        # entrypoint with RADIO_URL pointing at the PTY symlink.
+        # Hence socat is installed at startup and run inside this container.
        - name: otbr
          image: openthread/otbr:latest
          command:
@@ -1,18 +0,0 @@
-apiVersion: external-secrets.io/v1
-kind: ExternalSecret
-metadata:
-  name: barman-cloud-creds
-  namespace: paperless
-  annotations:
-    # Prune-disabled — a standing guard kept from the seed->paperless-KS handoff (barman creds).
-    kustomize.toolkit.fluxcd.io/prune: disabled
-spec:
-  refreshInterval: 1h
-  secretStoreRef:
-    kind: ClusterSecretStore
-    name: openbao
-  target:
-    name: barman-cloud-creds # keeps the old Secret's name — consumers unchanged
-  dataFrom:
-    - extract:
-        key: seed/paperless/barman-creds
@@ -70,6 +70,27 @@ spec:
            - name: consume
              mountPath: /home/scanner
              subPath: scanner
+          # FTP has no health verb, so the control port accepting a connection
+          # is what can be asserted. It is enough for the failure that matters:
+          # if vsftpd dies the scanner cannot deposit anything and nothing else
+          # in the chain notices, because paperless only ever sees an empty
+          # consume directory — which is indistinguishable from nobody having
+          # scanned.
+          #
+          # Only the control port is probed. The passive range is negotiated
+          # per transfer and is not listening at rest.
+          livenessProbe:
+            tcpSocket:
+              port: ftp-ctrl
+            initialDelaySeconds: 15
+            periodSeconds: 30
+            timeoutSeconds: 5
+          readinessProbe:
+            tcpSocket:
+              port: ftp-ctrl
+            initialDelaySeconds: 5
+            periodSeconds: 10
+            timeoutSeconds: 5
          resources:
            requests:
              cpu: 20m
@@ -1,3 +1,9 @@
+# One Hetzner S3 key, one path, shared by every barman ObjectStore. Separate
+# per-app paths would not make rotation independent — that needs one Hetzner
+# key per consumer (#397).
+#
+# velero reads the same key from infrastructure/velero-hetzner, which holds it
+# as a credentials file rather than these three fields.
 apiVersion: external-secrets.io/v1
 kind: ExternalSecret
 metadata:
@@ -15,4 +21,4 @@ spec:
    name: hetzner-s3-creds # keeps the old Secret's name — consumers unchanged
  dataFrom:
    - extract:
-        key: seed/paperless/hetzner-creds
+        key: infrastructure/hetzner-s3
@@ -20,7 +20,6 @@ resources:
  - cluster.yaml
  - objectstore.yaml
  - scheduled-backup.yaml
-  - barman-creds-externalsecret.yaml
  - hetzner-creds-externalsecret.yaml
  - pvcs.yaml
 configMapGenerator:
@@ -155,21 +155,33 @@ spec:
            - name: bridge-cert
              mountPath: /shared
              readOnly: true
-          # TCP probes — HTTP probes against /api/ flooded the
-          # `paperless.auth` logger every 10 s with "No authentication
-          # provided from private IP …". With ENABLE_HTTP_REMOTE_USER
-          # the middleware logs every unauth API request, and there's
-          # no public health endpoint to probe. TCP confirms gunicorn
-          # is bound; that's the same liveness signal we'd get from
-          # /api/ minus the noise.
+          # /accounts/login/ rather than /api/ or a TCP connect.
+          #
+          # /api/ is unusable as a probe target: with ENABLE_HTTP_REMOTE_USER
+          # the remote-user middleware logs "No authentication provided from
+          # private IP …" for every unauthenticated API request, so probing it
+          # floods `paperless.auth`. Measured: four requests to /api/ produce
+          # four log lines, four to /accounts/login/ produce none — the
+          # middleware only covers the API surface.
+          #
+          # A TCP connect avoids the noise but only proves gunicorn accepted a
+          # socket. /accounts/login/ renders a real Django view, so URL
+          # routing, settings and templating all have to work. It does not
+          # prove Postgres is healthy; nothing cheap here does.
+          #
+          # Safe against ALLOWED_HOSTS: the kubelet sends the pod IP as Host,
+          # and PAPERLESS_ALLOWED_HOSTS is "*". Narrowing that value later
+          # means giving these probes an explicit Host header.
          livenessProbe:
-            tcpSocket:
+            httpGet:
+              path: /accounts/login/
              port: http
            initialDelaySeconds: 120
            periodSeconds: 30
            timeoutSeconds: 10
          readinessProbe:
-            tcpSocket:
+            httpGet:
+              path: /accounts/login/
              port: http
            initialDelaySeconds: 30
            periodSeconds: 10
@@ -34,6 +34,32 @@ spec:
            - name: wyoming
              containerPort: 10300
              protocol: TCP
+          # Wyoming is raw TCP with no HTTP surface and no health verb, so
+          # accepting a connection is all that can be asserted from outside the
+          # process — weaker than an HTTP probe, but the previous state was
+          # none at all.
+          #
+          # A startupProbe rather than a long liveness delay: this container
+          # runs with --retrain-on-start, and retraining against the Home
+          # Assistant entity list takes as long as it takes. The startup gate
+          # allows up to 10 minutes (60 x 10s) and only then hands over to
+          # liveness, so a slow retrain cannot be mistaken for a hang, and a
+          # genuine hang after startup is still caught within a minute.
+          startupProbe:
+            tcpSocket:
+              port: wyoming
+            periodSeconds: 10
+            failureThreshold: 60
+          livenessProbe:
+            tcpSocket:
+              port: wyoming
+            periodSeconds: 30
+            timeoutSeconds: 5
+          readinessProbe:
+            tcpSocket:
+              port: wyoming
+            periodSeconds: 10
+            timeoutSeconds: 5
          volumeMounts:
            - name: models
              mountPath: /models
@@ -12,4 +12,4 @@ spec:
    name: hetzner-s3-creds
  dataFrom:
    - extract:
-        key: seed/trmnl/hetzner-creds
+        key: infrastructure/hetzner-s3
@@ -1,20 +1,15 @@
 # Headless renderer: screenshots the Home Assistant e-ink dashboard,
 # dithers it to 16 greys and hands it to Terminus.
 #
-# Upstream ships this as a Home Assistant add-on. Our HA is a plain
-# container with no Supervisor, so it runs standalone here instead —
-# viable because the app prefers HOME_ASSISTANT_URL/ACCESS_TOKEN env
-# vars over /data/options.json and authenticates with an ordinary
-# long-lived token. SUPERVISOR_TOKEN is deliberately NOT set: it only
-# flips an internal isAddOn flag, and setting it would switch the app
-# to add-on behaviour (fixed port, /data assumptions).
+# Upstream ships this as a Home Assistant add-on; it runs standalone here
+# because the app prefers the env vars over /data/options.json. Do NOT set
+# SUPERVISOR_TOKEN — it flips an internal isAddOn flag and switches the app to
+# add-on behaviour (fixed port, /data assumptions).
 #
-# DIRECTION OF TRAVEL, which is the non-obvious part: with the
-# byos-hanami webhook in `uri` delivery mode the renderer does NOT
-# push image bytes. It POSTs a URL pointing at its own /output/<file>
-# endpoint, and TERMINUS FETCHES THE IMAGE BACK from it. That is why
-# both live in this namespace — the pull is intra-namespace and is
-# already permitted by the default-deny-ingress rule.
+# DIRECTION OF TRAVEL, the non-obvious part: in `uri` delivery mode the
+# renderer does not push image bytes. It POSTs a URL to its own /output/<file>
+# and Terminus fetches the image back. Both therefore live in this namespace,
+# where that pull is already permitted.
 apiVersion: v1
 kind: ConfigMap
 metadata:
@@ -29,6 +29,27 @@ spec:
            - name: wyoming
              containerPort: 10300
              protocol: TCP
+          # Wyoming is a raw TCP protocol with no HTTP surface and no health
+          # verb, so accepting a connection is the only thing that can be
+          # asserted from outside the process. That is weaker than an HTTP
+          # probe but strictly better than the previous state of none at all,
+          # where a dead server stayed Ready and Home Assistant kept routing
+          # speech to it.
+          #
+          # The liveness delay is generous because the model is loaded at
+          # startup from the data volume.
+          livenessProbe:
+            tcpSocket:
+              port: wyoming
+            initialDelaySeconds: 90
+            periodSeconds: 30
+            timeoutSeconds: 5
+          readinessProbe:
+            tcpSocket:
+              port: wyoming
+            initialDelaySeconds: 20
+            periodSeconds: 10
+            timeoutSeconds: 5
          volumeMounts:
            - name: data
              mountPath: /data
@@ -305,7 +305,7 @@ server → agent → step pod → server end to end:

 ```sh
 curl -sS -o /dev/null -w '%{http_code}\n' https://ci.renner.uno/
-woodpecker pipeline create --branch master --var PIPELINE=e2e-test k.renner/homelab
+woodpecker-cli pipeline deploy k.renner/homelab <pipeline-number> e2e-test
 ```

 Step pods must still reach the server on `:8000` while still being unable to
@@ -1,11 +1,8 @@
 ---
 # Barman S3 credentials for wp-pg.
 #
-# Sourced from seed/paperless/hetzner-creds, which is not where they belong.
-# Issue #397 wants woodpecker to own seed/woodpecker/hetzner-creds; creating
-# that path needs OpenBao write access (`bao kv list seed` → 403 for the
-# identities available here), so it stays open. The values are identical, so it
-# is a one-line swap of the `key:` below once the path exists.
+# One shared path for one shared credential — see the note in
+# ../paperless/hetzner-creds-externalsecret.yaml.
 #
 # The namespace allowlist on the openbao ClusterSecretStore
 # (infrastructure/post-crds/openbao-clustersecretstore.yaml) must include this
@@ -24,4 +21,4 @@ spec:
    name: hetzner-s3-creds
  dataFrom:
    - extract:
-        key: seed/paperless/hetzner-creds
+        key: infrastructure/hetzner-s3
@@ -36,11 +36,9 @@ spec:
  target:
    name: hetzner-s3-creds
  dataFrom:
-    # Reuses the paperless copy of the shared Hetzner S3 credentials (identical
-    # ACCESS_KEY_ID / ACCESS_SECRET_KEY / REGION) to avoid seeding a new OpenBao
-    # path for this migration — same approach woodpecker took. FOLLOW-UP: give
-    # wordpress its own seed/wordpress/hetzner-creds path once OpenBao can be
-    # written, and repoint this here (the value is the same, so it's a drop-in
-    # swap).
+    # One shared path for one shared credential. There is a single Hetzner S3
+    # key behind all of these — see the note in
+    # ../paperless/hetzner-creds-externalsecret.yaml for why per-app paths were
+    # the wrong shape and what would have to change for them to be right.
    - extract:
-        key: seed/paperless/hetzner-creds
+        key: infrastructure/hetzner-s3
@@ -12,9 +12,11 @@
 #   * host namespaces + hostPath volumes: denied for every step pod (neither
 #     kaniko nor the buildx plugin needs them).
 #   * privileged containers: denied EXCEPT the allow-listed buildx plugin image.
-# Verified non-breaking: this repo's own builds use rootless kaniko
-# (gcr.io/kaniko-project/executor) which needs none of the above; only the
-# external buildx plugin needs privileged, and it is allow-listed by image ref.
+# Verified non-breaking: this repo's own builds use rootless kaniko, which needs
+# none of the above; only the external buildx plugin needs privileged, and it is
+# allow-listed by image ref. The kaniko image moved off gcr.io to the maintained
+# chainguard-dev fork in #552 — no policy change was needed, because nothing
+# here matches on the kaniko image, only on the buildx one.
 #
 # ValidatingAdmissionPolicy is GA / in-tree on the cluster's Kubernetes v1.35 —
 # no external admission controller (Kyverno/Gatekeeper) is introduced.
@@ -33,22 +33,14 @@ spec:
    remediation:
      retries: 3
  values:
-    # Roll the agent DaemonSet when cilium-config changes. Cilium reads
-    # datapath options once, at agent start, and the chart puts no config
-    # checksum on the pod template — so a changed ConfigMap leaves every agent
-    # running the previous datapath until something restarts it. Nothing did.
+    # Rolls the agent DaemonSet when cilium-config changes. Cilium reads
+    # datapath options once at agent start and the chart puts no config
+    # checksum on the pod template, so without this a changed ConfigMap leaves
+    # every agent on the previous datapath indefinitely (#592).
    #
-    # This is not hypothetical. vlan-bpf-bypass reached cilium-config and every
-    # v30iot macvlan workload stayed broken until the agents were deleted by
-    # hand, one node at a time (issue #592). policyMapMax has the same
-    # exposure, and its comment below says "takes effect on agent restart" —
-    # documentation standing in for automation.
-    #
-    # The trade: any cilium-config change now rolls the CNI cluster-wide,
-    # node by node. That is disruptive-ish, but it is what a datapath change
-    # already required — the difference is that it now happens on its own
-    # instead of being forgotten. Reloader is already deployed for exactly
-    # this pattern; named per-ConfigMap rather than blanket, as elsewhere.
+    # The trade is that any cilium-config change now rolls the CNI node by
+    # node — which is what a datapath change required anyway, only now it is
+    # not forgotten.
    annotations:
      configmap.reloader.stakater.com/reload: cilium-config
    # Which pod labels feed security-identity computation. Patterns are
@@ -69,57 +61,42 @@ spec:
    socketLB:
      enabled: true
    prometheus:
-      # The agent exported no metrics at all, so BPF map utilisation was
-      # invisible: when per-endpoint policy maps (cilium_policy_v3_*) run out
-      # of space the agent only says "no space left on device" in its log and
-      # pod sandbox creation fails (issue #452). cilium_bpf_map_pressure makes
-      # that observable — and alertable — before it stalls a rollout.
+      # Without agent metrics, BPF map utilisation is invisible: a full policy
+      # map only shows up as "no space left on device" in the log while pod
+      # sandbox creation fails (#452). cilium_bpf_map_pressure makes it
+      # alertable beforehand.
      enabled: true
      serviceMonitor:
        enabled: true
    bpf:
-      # Size of each endpoint's own cilium_policy_v3_<id> map, holding one
-      # entry per (identity, direction, protocol, port) the endpoint is
-      # allowed. When it fills, endpoint regeneration fails with "no space
-      # left on device", the CNI ADD call never returns, and the pod is stuck
-      # in sandbox creation — so this must stay comfortably above the busiest
-      # endpoint's entry count, tracked by cilium_bpf_map_pressure.
-      # Takes effect on agent restart; the map is sized at creation.
-      # Bootstrap installs Cilium from the inline manifest in
-      # kubernetes/talos/patches/cilium-cni.yaml, so bpf-policy-map-max there
-      # must move with this value or a cold rebuild starts with the old size.
-      # kubernetes/talos/cilium.yaml carries a third copy of the same key.
-      # Nothing enforces any of this; grep bpf-policy-map-max before changing it.
+      # Per-endpoint policy map size: one entry per (identity, direction,
+      # protocol, port) allowed. When it fills, endpoint regeneration fails
+      # with "no space left on device" and the pod hangs in sandbox creation.
+      # Keep it comfortably above the busiest endpoint, watched by
+      # cilium_bpf_map_pressure. Sized at map creation, so it takes an agent
+      # restart.
+      #
+      # THREE COPIES of this key exist — here, talos/patches/cilium-cni.yaml
+      # and talos/cilium.yaml. The latter two are what a cold rebuild installs
+      # from. Nothing enforces agreement; grep bpf-policy-map-max before
+      # changing it.
      policyMapMax: 65536
      # VLAN ids the eBPF datapath is allowed to pass. Without this it drops
      # VLAN-tagged frames, accounted as "VLAN traffic disallowed by VLAN
      # filter" in cilium_drop_count_total.
      #
-      # 30 is v30iot, the macvlan parent for the shelly-manager, matter-server,
-      # otbr and music-assistant attachments. On bare metal it is a VLAN
-      # sub-interface of enp2s0f0np0; inside the former Proxmox guests it was
-      # an untagged virtio NIC, which is why this was not needed before.
+      # Only VLAN 30 (v30iot) needs listing. Cilium attaches to devices that
+      # carry an address, so it sees mgmt0's frames already untagged by the
+      # 8021q layer — nothing for a VLAN filter to match. ens19 is deliberately
+      # address-less, so its frames only meet the filter on the shared parent,
+      # still tagged. Adding 40 would change nothing and would touch the
+      # datapath carrying etcd and the API.
      #
-      # VLAN 40 (mgmt0) is deliberately NOT listed, and the asymmetry is the
-      # interesting part. Cilium attaches to devices that carry an address —
-      # `cilium-dbg status --verbose` lists enp87s0, enp2s0f0np0, enp2s0f1np1
-      # and mgmt0, but NOT ens19. mgmt0 holds the node IP, so Cilium owns it as
-      # a device and sees frames the 8021q layer has already untagged; nothing
-      # for a VLAN filter to match. ens19 is deliberately address-less (see
-      # talos/patches/k8s-1.yaml — host addresses on that L2 make node replies
-      # bypass the UDM), so Cilium never attaches to it and VLAN 30 frames only
-      # meet the filter on the shared parent, still tagged.
+      # The symptom when this is wrong is not a DHCP timeout: a tc-layer drop
+      # reaches an AF_PACKET sender as ENOBUFS, so the CNI dhcp plugin reports
+      # "no buffer space available" (#592).
      #
-      # So the fix belongs on 30 alone. Listing 40 would change nothing, and
-      # would touch the datapath carrying etcd and the API for no reason.
-      #
-      # A tc-layer drop surfaces to an AF_PACKET sender as ENOBUFS, so the
-      # symptom is the CNI dhcp plugin reporting "no buffer space available"
-      # rather than a DHCP timeout. See issue #592.
-      #
-      # Same three-copy problem as policyMapMax above: vlan-bpf-bypass in
-      # kubernetes/talos/cilium.yaml and kubernetes/talos/patches/cilium-cni.yaml
-      # must move with this list. Takes effect on agent restart.
+      # Same three-copy problem as policyMapMax above. Takes an agent restart.
      vlanBypass: [30]
      # Let pods reach the cluster's own LoadBalancer external IPs; Cilium
      # redirects the socket directly to the backend pod instead of sending
@@ -36,25 +36,16 @@ spec:
  values:
    container_runtime: containerd

-    # --- mTLS between agents and the LAPI: the durable fix for the recurring
-    # KubeDaemonSetRolloutStuck auth loop (#340) ---
+    # mTLS between agents and the LAPI. Do not switch back to password auth:
+    # the LAPI runs without persistence, so its machine-registration DB is
+    # wiped on every restart, and password-registered agents then get 401
+    # "machine not found" and crashloop until re-registered by hand — which
+    # wedges the whole `infrastructure` Kustomization behind a HelmRelease
+    # that never goes Ready (#340).
    #
-    # The LAPI runs WITHOUT persistence (see persistentVolume note below), so
-    # its sqlite machine-registration DB is ephemeral and every LAPI pod restart
-    # wiped it. Under the old password flow the agents registered exactly ONCE
-    # (init container running `cscli lapi register --token`) and cached a
-    # password the wiped LAPI no longer recognised -> 401 "machine not found"
-    # -> CrashLoopBackOff on all three agents -> DaemonSet never Ready -> the
-    # crowdsec HelmRelease upgrade `--wait` times out forever -> the whole
-    # `infrastructure` Kustomization (and every app depending on it) stays
-    # unhealthy. That is the #340 outage.
-    #
-    # With client-cert auth the agent init container no longer registers at all
-    # (verified via `helm template`: the `cscli lapi register` step is gone).
-    # The agent presents a cert whose OU (agent-ou) the LAPI trusts, and a
-    # freshly restarted LAPI with an EMPTY DB auto-recreates each machine record
-    # from the presented cert on connect. So the system self-heals across LAPI
-    # restarts with no PVC, no Ceph, and no manual re-registration.
+    # With client certs the agent never registers: a restarted LAPI with an
+    # empty DB recreates each machine record from the presented cert, so this
+    # self-heals with no PVC and no intervention.
    #
    # cert-manager (already reconciled earlier in this same `infrastructure`
    # stage) provisions a fully self-contained self-signed CA (selfSigned
@@ -87,13 +78,10 @@ spec:

    lapi:
      replicas: 1
-      # The chart defaults request 500m. Measured steady-state draw is 2m, and
-      # the request is what the scheduler reserves, so the default parks half a
-      # core of unusable capacity per LAPI. That is affordable on three nodes
-      # and is not on two: with one node out for maintenance the remaining pair
-      # sit at 100% of requested CPU while actually using ~22%, and nothing new
-      # can be placed. The limit stays at the chart default so a log flood can
-      # still burst; only the reservation shrinks.
+      # Far below the chart default, which reserves half a core per LAPI for a
+      # workload that draws single-digit millicores — enough to leave the
+      # cluster unschedulable with one node out. Only the reservation shrinks;
+      # the limit stays at the chart default so a log flood can still burst.
      resources:
        requests:
          cpu: 50m
@@ -33,3 +33,16 @@ spec:
    crds: CreateReplace
    remediation:
      retries: 3
+  values:
+    # The chart ships these disabled, so the controller ran with no probe of
+    # any kind: a wedged reconciler stayed Ready and every ExternalSecret would
+    # simply stop refreshing, which surfaces only when a consumer needs a
+    # credential that has since rotated.
+    #
+    # Enabling them also starts the health server — the chart derives
+    # --health-probe-bind-address from these values, and without them the
+    # controller exposes nothing but its metrics port.
+    livenessProbe:
+      enabled: true
+    readinessProbe:
+      enabled: true
@@ -6,19 +6,12 @@
 # fails the route over across all per-node peers (no single point of
 # failure if a node/pod drops).
 #
-# Uses the ROOTLESS image (userspace wireguard-go). The netbird process
-# terminates the WireGuard tunnel in userspace and reaches cluster
-# services by opening its OWN sockets to them — NOT by L3-forwarding
-# packets. That distinction is the whole point:
-#   - Cilium socket-LB DNATs the netbird process's own connections, so
-#     forwarding to ClusterIP / LB VIPs actually works. A kernel L3
-#     routing peer fails here: socket-LB never sees forwarded packets,
-#     so they hit the raw VIP and are blackholed (confirmed via conntrack).
-#   - No NET_ADMIN / no kernel WireGuard → runs fully unprivileged
-#     (drop ALL caps, runAsNonRoot), so it satisfies Pod Security too.
-#
-# Flow: mesh peer (100.96.x.x) --wg--> a per-node pod (userspace netbird)
-#        --own socket (socket-LB DNAT)--> service ClusterIP/LB VIP
+# Must stay on the ROOTLESS image (userspace wireguard-go). The process
+# terminates the tunnel in userspace and reaches services by opening its own
+# sockets, which Cilium's socket-LB can DNAT. A kernel WireGuard peer
+# L3-forwards instead, socket-LB never sees those packets, and they are
+# blackholed at the raw VIP. Rootless also means no NET_ADMIN, so the pod
+# runs fully unprivileged.
 #
 # Egress is locked down by the netbird-ingress-egress CiliumNetworkPolicy
 # (network-policies/ingress-isolation.yaml).
@@ -41,18 +41,14 @@ spec:
        - ports:
            - port: "8080"
              protocol: TCP
-    # shelly-manager (:8080) is likewise reached only through its own
-    # Authentik gate outpost. Note this rule and the vscode one are
-    # port-identical: because this CNP's endpointSelector is {}, a
-    # `toPorts: 8080` grant here applies to EVERY pod in the namespace that
-    # listens on 8080, not just the intended one — which is exactly how
-    # shelly-manager silently rode on the old traefik→:8080 allow written
-    # for code-server, and why removing that allow in 760e187 took
-    # shelly-manager's ingress down with it. The `fromEndpoints` selector is
-    # what keeps these two apart: each gate outpost can only reach its own
-    # target, enforced on the egress side by the matching CNPs in the
-    # authentik namespace (vscode-gate-egress.yaml,
-    # shelly-manager-gate-egress.yaml).
+    # shelly-manager, behind its own Authentik gate outpost.
+    #
+    # CAUTION for every :8080 rule here: this policy's endpointSelector is {},
+    # so a toPorts grant on 8080 applies to EVERY pod in the namespace
+    # listening on that port, not just the intended one. Three apps share
+    # :8080. What keeps them apart is the fromEndpoints selector plus the
+    # matching per-gate egress CNPs in the authentik namespace. Changing a
+    # :8080 rule here affects all of them.
    - fromEndpoints:
        - matchLabels:
            "k8s:io.kubernetes.pod.namespace": authentik
@@ -61,11 +57,8 @@ spec:
        - ports:
            - port: "8080"
              protocol: TCP
-    # esphome (ESPHome Device Builder, :6052) is likewise reached only through
-    # its own Authentik gate outpost. Unlike the :8080 vscode/shelly rules
-    # above, :6052 is unique to esphome, so this namespace-wide (endpointSelector
-    # {}) toPorts grant doesn't silently apply to any other app — the
-    # fromEndpoints selector still scopes it to the esphome-gate outpost.
+    # esphome (:6052), behind its own gate outpost. Port is unique to it, so
+    # the namespace-wide grant does not reach anything else.
    - fromEndpoints:
        - matchLabels:
            "k8s:io.kubernetes.pod.namespace": authentik
@@ -74,13 +67,8 @@ spec:
        - ports:
            - port: "6052"
              protocol: TCP
-    # zigbee2mqtt (Z2M frontend, :8080) is likewise reached only through its own
-    # Authentik gate outpost. Like the vscode/shelly-manager rules above this is
-    # the SHARED :8080 (zigbee2mqtt is the third app on that port), so this
-    # namespace-wide (endpointSelector {}) grant applies to every :8080 pod — the
-    # fromEndpoints selector scopes it to the zigbee2mqtt-gate outpost, and the
-    # matching authentik-side zigbee2mqtt-gate-egress.yaml scopes egress to the
-    # zigbee2mqtt pod specifically.
+    # zigbee2mqtt frontend, behind its own gate outpost. Shared :8080 — see the
+    # caution above.
    - fromEndpoints:
        - matchLabels:
            "k8s:io.kubernetes.pod.namespace": authentik
@@ -89,11 +77,8 @@ spec:
        - ports:
            - port: "8080"
              protocol: TCP
-    # zone-configurator (Everything Presence mmWave zone configurator, :42069)
-    # is likewise reached only through its own Authentik gate outpost. Like
-    # esphome's :6052, :42069 is unique to it, so this namespace-wide (endpoint
-    # Selector {}) toPorts grant doesn't silently apply to any other app; the
-    # fromEndpoints selector scopes it to the zone-configurator-gate outpost.
+    # zone-configurator (:42069), behind its own gate outpost. Port is unique
+    # to it.
    - fromEndpoints:
        - matchLabels:
            "k8s:io.kubernetes.pod.namespace": authentik
@@ -131,25 +116,16 @@ spec:
    - fromEntities:
        - host
        - remote-node
-    # World ingress (IoT-VLAN devices via the BGP LoadBalancers) is NOT
-    # granted namespace-wide here. A blanket `fromEntities: world` on this
-    # endpointSelector:{} policy exposed EVERY pod in the namespace to the
-    # untrusted IoT VLAN / any BGP-routed source — vscode (:8080),
-    # zone-configurator (:42069), otbr, whisper, etc. — not just the two
-    # LoadBalancers that need it. World is now scoped per-target in the
-    # dedicated policies at the bottom of this file: world -> mosquitto
-    # :1883/:8883 and world -> home-assistant :8123 only. (matter-server on
-    # 10.2.x.226 rides a multus net1 interface that bypasses Cilium policy
-    # entirely, so it is unaffected either way.)
-    # ICMP — all standard ICMPv4 and ICMPv6 types from any cluster pod.
-    # Per Cilium docs, "If any layer 4 policy is specified, then ICMP
-    # will be blocked unless it's related to a connection that is
-    # otherwise allowed by the policy." The CT-RELATED path is not
-    # passing these in practice (Hubble shows ICMPv6 DestinationUnreachable
-    # being POLICY_DENIED on the egress side of established DNS flows),
-    # so allow ICMP explicitly. Same shape as commit 3c517a0 — widened
-    # from the error class to the full standard type set. Cilium's
-    # ICMPField requires an explicit type per entry; no wildcard.
+    # Do NOT add a blanket `fromEntities: world` to this policy. With
+    # endpointSelector {} it exposes every pod in the namespace to the IoT
+    # VLAN and any BGP-routed source, not just the LoadBalancers that need it.
+    # World is scoped per target in the dedicated policies at the bottom of
+    # this file. (matter-server rides a multus interface that bypasses Cilium
+    # policy entirely and is unaffected either way.)
+    # ICMP must be allowed explicitly: once any L4 policy exists Cilium blocks
+    # it unless CT-RELATED passes it, which in practice it does not. Cilium's
+    # ICMPField takes one type per entry — there is no wildcard, so the list
+    # has to be spelled out.
    - fromEndpoints:
        - matchExpressions:
            - key: io.kubernetes.pod.namespace
@@ -186,10 +162,8 @@ spec:
    - toEndpoints:
        - matchLabels:
            "k8s:io.kubernetes.pod.namespace": apps
-    # In-cluster InfluxDB: HA's HACS InfluxDB integration writes state
-    # changes here (replaces the legacy http://influxdb.srv.renner.uno
-    # target — see kubernetes/apps/influxdb/ha-token-job.yaml for the
-    # write-bucket token wiring).
+    # In-cluster InfluxDB: HA's HACS integration writes state changes here.
+    # Token wiring is in apps/influxdb/ha-token-job.yaml.
    - toEndpoints:
        - matchLabels:
            "k8s:io.kubernetes.pod.namespace": influxdb
@@ -213,9 +187,8 @@ spec:
    - toEntities:
        - host
        - remote-node
-    # World: IoT-VLAN devices, ESPHome, HA Cloud, garage S3 (initial
-    # tarball seed), legacy InfluxDB on VM 108, third-party integration
-    # endpoints (Hue, Roomba, Philips, Brother IPP, …).
+    # World: IoT-VLAN devices, HA Cloud, object storage, and third-party
+    # integration endpoints on the LAN and internet.
    - toEntities:
        - world
    # ICMP — egress mirror of the ingress ICMP allow above. Lets HA
@@ -1,12 +1,5 @@
 ---
-# Baseline ingress policy for the `woodpecker` namespace (wp-pg now; server and
-# agent arrive in stage 2).
-#
-# Unlike the `apps` baseline this replaces, every allow here lands on a
-# namespace holding one service, so a namespace-scoped grant is not a blanket
-# grant across unrelated workloads. That is the point of the move: in `apps`,
-# letting the CNPG operator reach wp-pg would also have opened gitea, gatus,
-# external-dns and ical-proxy to the whole database namespace (issue #433).
+# Baseline ingress policy for the `woodpecker` namespace.
 #
 # CAUTION when adding rules here: this policy has `endpointSelector: {}`, so
 # every rule below applies to EVERY pod in the namespace. A `toPorts` block
@@ -15,11 +8,7 @@
 # belongs in its own policy with its own selector, as
 # `wp-pg-allow-cnpg-operator` below does.
 #
-# No egress section, so egress is unrestricted. Deliberate for now and revisited
-# in stage 2: wp-pg needs DNS plus `world` for WAL archiving to Hetzner S3, and
-# the server/agent add gitea, the Kubernetes API and outbound plugin pulls.
-# Writing that ruleset once, with the full workload set present, beats guessing
-# it here and silently breaking the WAL archiving this stage exists to verify.
+# There is no egress section, so egress is unrestricted. Still open (#433).
 apiVersion: cilium.io/v2
 kind: CiliumNetworkPolicy
 metadata:
@@ -5,25 +5,15 @@ kind: Kustomization
 # secret. The matching OpenBao policy/role for each lives in ../policies/ and is
 # bootstrapped manually (not GitOps-managed).
 #
-# IMAGE PINNING: every rotator here uses a DATED TAG of secret-rotator
-# (`:YYYY-MM-DD`), never a digest and never `:latest`. This is a registry-local
-# image, so it does not need digest pinning, and a dated tag makes "what actually
-# runs" a reviewable diff.
+# IMAGE PINNING: dated tags (`:YYYY-MM-DD`), never a digest and never
+# `:latest`. Do NOT switch to digests — untagged manifests in this registry are
+# garbage-collected once the tags move past them, so a pinned digest silently
+# stops resolving after a few unrelated rebuilds of build-ci-images.yml. These
+# jobs are quarterly, so the resulting ImagePullBackOff looks like nothing
+# happening rather than like a failure (#458).
 #
-# Digests were tried and actively broke: untagged manifests are garbage-collected
-# once :latest and the dated tags move past them, so a digest pinned today stops
-# resolving after a few rebuilds. That decay is driven by edits to
-# .woodpecker/build-ci-images.yml — a shared file — so adding an UNRELATED image
-# republishes secret-rotator and orphans the manifest every rotator here was
-# pinned to. 11 of these were pinned to digests that no longer existed and would
-# have ImagePullBackOff'd on their first scheduled run (issue #458); because they
-# are quarterly, that would have looked like nothing happening rather than like a
-# failure.
-#
-# Keep them all on one tag: it is a single binary containing every mode
-# (random | ha-token | cloudflare-roll | netbird-key | proxmox-token |
-# gitea-token | woodpecker-secret), so a split serves no purpose and just makes
-# the next bump partial.
+# Keep every rotator on the same tag: it is one binary containing all modes, so
+# splitting only makes the next bump partial.
 #
 # ADDING A ROTATOR: copy an existing file, and check you did not inherit a
 # digest pin from an older example — nothing enforces this automatically, so it
@@ -24,12 +24,10 @@ spec:
    - start: "fd99::"
      stop: "fd99::ff"
 ---
-# Cilium BGPv2 control-plane config peering each k8s node with the UDM
-# over its MGMT LAN interface — NOT over v30iot. Control-plane traffic
-# belongs on the management network; the IoT VLAN is the noisy untrusted
-# L2 segment we're explicitly trying to keep cluster infrastructure off
-# of. Each node sources from its eth0 (10.2.40.x / fd40::<host>) via
-# the kernel routing decision; no explicit localAddress override needed.
+# Cilium BGPv2 control-plane config peering each node with the UDM over the
+# management LAN — never over v30iot, which is the untrusted IoT segment.
+# The source address comes from the kernel routing decision, so no explicit
+# localAddress override is needed.
 #
 # Two parallel sessions, one per address family:
 #   - v4 session: peer 10.2.40.1, family IPv4 unicast only
@@ -1,27 +1,16 @@
 ---
 # Velero Schedules for stateful app namespaces.
 #
-# Scope is restricted to PersistentVolumeClaims via includedResources.
-# Flux owns every other K8s object (Deployment, Service, Ingress,
-# ConfigMap, Secret, …) — backing those up shadows current git state
-# on a rebuild: Velero restores stale manifests from yesterday's
-# snapshot, then the app Kustomization clobbers them with whatever git
-# says — except when the Kustomization is blocked on the restore chain,
-# leaving the cluster temporarily serving the stale spec (e.g. the
-# paperless Ingress missing prod hostnames after the 2026-04-22
-# rebuild). PVC-only is the canonical "back up data, not state" scope
-# (see ~/Notes/wiki/k8s-backup-scope.md and the project memory rule).
+# Scope is PersistentVolumeClaims only. Flux owns every other object, and
+# backing those up shadows git on a rebuild: Velero restores yesterday's
+# manifests and the cluster serves them until the Kustomization catches up.
+# Back up data, not state.
 #
-# snapshotMoveData=true keeps doing the heavy lifting via Kopia +
-# node-agent: PVC contents are uploaded to Garage and restored
+# snapshotMoveData uploads PVC contents through Kopia and the node-agent,
 # independently of the K8s API surface.
 #
-# Naming convention: <app>-daily for the app's Schedule. Restore is a
-# manual, operator-driven procedure — see kubernetes/RUNBOOK-cold-rebuild.md.
-# (There is no automatic bootstrap-restore Job; it was removed as dead code,
-# issue #200.)
-#
-# Retention: 30 days, matching the live CNPG Barman ObjectStore policy.
+# Naming: <app>-daily. Restore is manual — see RUNBOOK-cold-rebuild.md.
+# Retention matches the CNPG Barman policy.

 apiVersion: velero.io/v1
 kind: Schedule
@@ -203,22 +192,13 @@ metadata:
  labels:
    app.kubernetes.io/part-of: homelab-backup
 spec:
-  # Daily at 06:45 local (next free stagger slot). All nine PVCs live
-  # in the home-assistant namespace regardless of which app/ dir owns
-  # their manifest (matter-server, otbr, whisper, speech-to-phrase,
-  # zone-configurator all set `namespace: home-assistant` via their
-  # Kustomization, not per-resource): home-assistant-config (.storage
-  # entity registry, recorder DB, secrets.yaml), esphome-data,
-  # shelly-manager-data, matter-server-data, otbr-data, whisper-data,
-  # speech-to-phrase-models, speech-to-phrase-train,
-  # zone-configurator-config. No CNPG cluster in this namespace, so no
-  # label exclusion is needed. On restore, home-assistant-config has its
-  # own path (the HA pod's `seed` initContainer pulling the native HAOS
-  # backup from Garage, see the home-assistant Kustomization comment in
-  # kubernetes/clusters/homelab/home-assistant.yaml); layering a Velero
-  # PVC restore on top of that flow for the same PVC needs its own review.
-  # Restore of these schedules is manual — see
-  # kubernetes/RUNBOOK-cold-rebuild.md.
+  # Daily at 06:45 local. Sweeps every PVC in the home-assistant namespace —
+  # several apps under apps/ set `namespace: home-assistant` in their
+  # Kustomization, so their PVCs land here too.
+  #
+  # home-assistant-config has its own restore path: the HA pod's `seed`
+  # initContainer pulls the native HAOS backup. Layering a Velero PVC restore
+  # on top of that for the same PVC needs its own review.
  schedule: "45 6 * * *"
  useOwnerReferencesInBackup: false
  template:
@@ -229,6 +209,13 @@ spec:
    storageLocation: default
    ttl: 720h0m0s
    snapshotMoveData: true
+    # Excludes the CNPG cluster's PVC. A crash-consistent snapshot of a
+    # running Postgres data directory is not a restorable backup, and Barman
+    # covers that database anyway — see ha-pg-scheduled-backup.yaml.
+    labelSelector:
+      matchExpressions:
+        - key: cnpg.io/cluster
+          operator: DoesNotExist
 ---
 apiVersion: velero.io/v1
 kind: Schedule
@@ -8,16 +8,9 @@ spec:
    image: quay.io/ceph/ceph:v19.2.6 # {"$imagepolicy": "flux-system:ceph"}
    allowUnsupported: false
  dataDirHostPath: /var/lib/rook
-  # Do not start restarting OSDs while PGs are still recovering. The default
-  # is false, so Rook would proceed regardless — and paired with the old
-  # osdMaxUpdatesInParallel default that means it can take the next OSD down
-  # while the previous one's data is still being caught up.
-  #
-  # With three OSDs and size 3 there is no spare copy to fall back on: the
-  # gate between one OSD returning and the next going down is the only thing
-  # that keeps a rolling change from becoming an outage. See
-  # storage.osdMaxUpdatesInParallel below, which bounds the same operation
-  # from the other side.
+  # Defaults to false. With three OSDs and size 3 there is no spare copy, so
+  # this gate is the only thing keeping a rolling OSD change from taking the
+  # next one down mid-recovery. Paired with storage.osdMaxUpdatesInParallel.
  upgradeOSDRequiresHealthyPGs: true
  mon:
    count: 3
@@ -39,112 +32,40 @@ spec:
      daemon:
        keyRotationPolicy: KeyGeneration
        keyGeneration: 2
-  # Bump CephFS subvolume cloner pool from 4 → 16. Velero CSI Snapshot
-  # Data Movement provisions a backupPVC per source PVC by cloning the
-  # VolumeSnapshot, and a 4-thread default stalls migrate-immich's
-  # multi-PVC Backup with `rados: "all cloner threads are busy"`. 16
-  # gives headroom for parallel restores during cluster rebuild too
-  # (paperless + audiobookshelf + immich + ... all clone at once).
+  # CephFS cloner pool raised from the default 4. Velero clones a
+  # VolumeSnapshot per PVC, and 4 threads stall a multi-PVC backup with
+  # `rados: "all cloner threads are busy"`.
  cephConfig:
    mon:
-      # Ceph's 30% default assumes the mon has a filesystem to itself, where
-      # 30% free is a meaningful reserve. Here the mons live on
-      # dataDirHostPath /var/lib/rook — the node's /var, shared with ~29 GB
-      # of containerd image and snapshot storage — and the mon DB itself is
-      # ~106 MB. So the default measures container churn, not Ceph: k8s-2
-      # trips MON_DISK_LOW whenever the image cache fills, and image GC does
-      # not clear it (most of /var/lib/containerd is overlayfs snapshots held
-      # by running containers, which GC cannot reclaim — see #434).
-      # 20% of a 60 GB /var still leaves ~12 GB against a 106 MB database.
-      # mon_data_avail_crit stays at the 5% default, and CephMonDiskLow in
-      # monitoring-rules watches /var directly for the real risk, which is the
-      # node filling rather than the mon growing.
+      # The Ceph default, stated rather than omitted. Deleting a line here does
+      # NOT restore the default: `ceph config` keeps whatever was last applied,
+      # so the old value would sit in the mon config database indefinitely.
+      # Change values in place; to actually drop one, `ceph config rm` it.
+      mon_data_avail_warn: "30"
+      # Off, against the upstream default. The forced compact_range on every
+      # paxos trim rewrote the whole store hundreds of times a day and was the
+      # single largest source of disk writes on these nodes.
      #
-      # BARE-METAL MIGRATION: revisit this. Give the mons their own volume and
-      # the default 30% becomes meaningful again, at which point this override
-      # should be dropped rather than carried over. It cannot be done on the
-      # current cluster — every StorageClass is Ceph-backed, so a mon PVC
-      # would be circular, and Rook only applies mon.volumeClaimTemplate to
-      # newly created mons, never migrating existing ones.
-      mon_data_avail_warn: "20"
-      # Stop compacting the whole RocksDB prefix on every paxos trim.
-      #
-      # Upstream default is true — "Compact a certain prefix (including paxos)
-      # when we trim its old states" — which is fine at low paxos rates and
-      # pathological here. Measured 2026-08-19:
-      #
-      #   paxos transactions      ~99,000/day  (1.15/s, sampled over 60 s)
-      #   paxos logical data       811 MB/day  (21.9 GB over 27 d uptime)
-      #   ACTUAL mon disk writes    80 GB/day  per mon, 240 GB/day for three
-      #                                        (cgroup io.stat: 2.15 TB/27 d)
-      #   => ~98x write amplification, for a ~106 MB database
-      #
-      # That was ~62% of all OS-disk writes on these nodes and roughly a
-      # quarter of everything the cluster writes — more than every client
-      # workload combined. With paxos_trim_min at 250, ~99k transactions/day
-      # means hundreds of forced range compactions per day, each rewriting the
-      # store.
-      #
-      # The churn itself is 99% cluster log and mgr stats, not real cluster
-      # activity: logm holds 6.7M paxos versions and mgrstat 4.4M, against
-      # osdmap's 9.6k. Every Rook-operator poll (mgr stat / versions / status /
-      # report / osd dump — 23 audit entries per minute per mon) becomes a
-      # cluster-log entry, hence a paxos transaction, replicated to all three
-      # mons. Reducing that polling is the complementary fix and is tracked
-      # separately; this setting removes the amplification regardless of rate.
-      #
-      # This does NOT disable compaction. RocksDB's own levelled compaction
-      # still runs and still reclaims trimmed keys; what stops is the extra
-      # forced compact_range on every trim. Store growth is therefore bounded
-      # by normal compaction, and there are two backstops if that assumption is
-      # wrong: mon_data_size_warn (15 GB default) raises HEALTH_WARN, which
-      # CephHealthWarn in monitoring-rules already alerts on, and
-      # mon_compact_on_start below compacts fully on every mon restart.
-      #
-      # Watch after applying: `du -sh /var/lib/rook/mon-*/store.db` on a node,
-      # or the mon store size in `ceph status`. If it grows past ~1 GB and does
-      # not come back down, revisit rather than leaving it.
+      # This does NOT disable compaction — RocksDB's levelled compaction still
+      # reclaims trimmed keys. Backstops if that proves wrong:
+      # mon_data_size_warn raises HEALTH_WARN, and mon_compact_on_start below
+      # compacts fully on every mon restart.
      mon_compact_on_trim: "false"
-      # Compensating control for the above: a full compaction on mon start.
-      # Upstream default is false. Mons restart on upgrades, node reboots and
-      # reschedules, so this gives a periodic full reclaim without paying for
-      # one on every trim. Cheap here — the store is ~106 MB.
+      # Compensating control, against the upstream default: mons restart often
+      # enough for this to give periodic full reclaim without paying for one
+      # on every trim.
      mon_compact_on_start: "true"
    mgr:
      mgr/volumes/max_concurrent_clones: "16"
-    # Discard/TRIM for the QLC NVMe per host (CT1000P3PSSD8, Crucial P3 Plus —
-    # earlier comments here said "P2", which is a different drive). These need
-    # an OSD restart to take effect (init-time). Baseline 2026-05-05:
-    # 71.6 MB/s avg / 0.89 s avg latency on a 5-min replicated 4 MiB write
-    # bench (post-SLC-cache). See ceph-speed-baseline-2026-05-05 in the wiki.
+    # Discard/TRIM. Init-time settings — an OSD restart is needed to apply.
    #
-    # bluestore_prefer_deferred_size_ssd / bluestore_deferred_batch_ops_ssd are
-    # DELIBERATELY LEFT AT THE CEPH DEFAULTS (0 and 16) and must not be raised
-    # again without re-reading this.
-    #
-    # They were previously set to the HDD-style 65536 / 64 as a throughput tune.
-    # prefer_deferred_size defers every write SMALLER than the threshold: the
-    # write goes first into RocksDB's WAL and is applied to the object store
-    # afterwards. That is a double write, and at 65536 it caught essentially
-    # every write this cluster makes — SQLite pages are 4 KiB, Postgres pages
-    # 8 KiB. Ceph disables deferral on SSD (default 0) precisely because solid
-    # state does not need the random-write batching that helps spinning rust.
-    #
-    # Two reasons it was the wrong trade here:
-    #   - The benchmark that justified it cannot have exercised it. It used
-    #     4 MiB writes, 64x ABOVE the 64 KiB cutoff, so not one of those writes
-    #     was ever deferred. The setting was validated by a workload it does
-    #     not affect.
-    #   - It doubles writes onto QLC, which has the lowest endurance of any
-    #     NAND type. Measured 2026-08-19: all three OSD drives at 80/82/87%
-    #     endurance used, advancing ~0.13 points/day, i.e. rated life exhausted
-    #     between Nov 2026 and Jan 2027 — and simultaneously, since size=3 on
-    #     3 OSDs means every drive absorbs 100% of cluster writes (see #434).
-    #
-    # This cluster is write-light (~117 GB/day at the RBD client layer), so
-    # throughput was never the binding constraint. Endurance is. If small-write
-    # latency ever becomes the real problem, fix it with more OSDs rather than
-    # by paying a 2x write tax on every 4 KiB page.
+    # bluestore_prefer_deferred_size_ssd and bluestore_deferred_batch_ops_ssd
+    # are DELIBERATELY LEFT AT THE CEPH DEFAULTS and must not be raised again.
+    # Deferral double-writes everything below the threshold, and an HDD-style
+    # value catches every write this cluster makes (4 KiB SQLite, 8 KiB
+    # Postgres pages). Ceph disables it on SSD for that reason. Throughput has
+    # never been the binding constraint here; endurance is. If small-write
+    # latency becomes a real problem, add OSDs instead.
    osd:
      bdev_enable_discard: "true"
      bdev_async_discard: "true"
@@ -158,106 +79,44 @@ spec:
    ssl: false
  monitoring:
    enabled: true
-  # Dedicated Ceph cluster network on VLAN 49, carried by the second X710
-  # SFP+ port (enp2s0f1np1) on each node, attached to the OSDs through Multus.
+  # Dedicated Ceph cluster network on VLAN 49, attached to the OSDs through
+  # Multus. The attachment is san-network-attachment.yaml.
  #
-  # WHY NOT provider: host, WHICH ALSO REACHES THAT LINK
+  # Only `cluster` is selected. Do not add `public`, and do not reach for
+  # `addressRanges` — that is honoured only under provider: host, which puts
+  # every daemon including the mons on host networking. A mon's address then
+  # becomes the node's DHCP lease, and when a lease moves the mon crash-loops
+  # on "Cannot assign requested address" with no node free to fail over to,
+  # because all three already hold the mon host ports.
  #
-  # Because it reaches it for every daemon, not just the ones that need it.
-  # The cluster network is an OSD concern: per the Ceph documentation it
-  # carries OSD heartbeat, replication and recovery, and "Ceph Monitors always
-  # operate on the public network". `addressRanges` is only honoured under
-  # provider: host, so using it put the mons on host networking as a side
-  # effect — making a mon's address the node's DHCP lease.
+  # With `public` unset, client traffic stays on the pod network and VLAN 49
+  # carries Ceph-internal traffic only — which is also why Rook's Multus
+  # prerequisites about host routing do not apply here.
  #
-  # That is not theoretical. When a lease moved, the mon could no longer bind
-  # ("Cannot assign requested address") and crash-looped. Rook detected it and
-  # started a failover, but with three mons on three nodes each holding the
-  # mon host ports, the replacement could not be scheduled anywhere — the
-  # canary sat Pending on "didn't have free ports". Two of three nodes hit
-  # this during the Talos v1.12.11 upgrade and both needed hand intervention.
-  #
-  # Only `cluster` is selected here. With `public` left unset Rook puts client
-  # traffic on the pod network, so mons, MDS, MGR and the CSI pods keep
-  # Rook-managed identities and hold no host ports — which is what removes
-  # that failure mode rather than working around it.
-  #
-  # ISOLATION IS PRESERVED
-  #
-  # Rook's Multus prerequisites about hosts routing to the Multus network
-  # apply to a Multus *public* network. Selecting only `cluster` means they do
-  # not apply, so VLAN 49 stays what it is: Ceph-internal traffic and nothing
-  # else, no router, no other participants. After this settles, the node
-  # addresses on that segment (10.99.0.1-.3) have no remaining purpose and
-  # should come out of the Talos configs — at which point the attachment's
-  # pool can take the whole /29.
-  #
-  # Reached from provider: "" rather than directly from host, which Rook's CRD
-  # rejects. See the phase A commit.
-  #
-  # ONE-TIME STEP THAT THIS FILE CANNOT EXPRESS, recorded because it is not
-  # reproducible from the manifests alone. Removing addressRanges here does
-  # not clear public_network and cluster_network from Ceph's own config
-  # database — the same trap the bluestore comment above describes: `ceph
-  # config` retains a value that is only deleted from this file. During the
-  # phase A rollout the first OSD came up on the pod network, still had
-  # public_network 10.2.40.0/24 in the config database, found no interface in
-  # it and crash-looped on "Failed to pick public address". Both keys were
-  # removed with `ceph config rm global public_network` and the same for
-  # cluster_network; Rook then wrote cluster_network afresh from the
-  # attachment below. Anyone rebuilding this cluster from scratch will not hit
-  # it — the config database starts empty — but anyone repeating a provider
-  # change on a live cluster will.
-  #
-  # Bounded by upgradeOSDRequiresHealthyPGs and storage.osdMaxUpdatesInParallel
-  # above: one OSD restarts at a time and only once PGs are clean again.
-  #
-  # The attachment itself is san-network-attachment.yaml.
+  # Changing the provider on a LIVE cluster needs a step this file cannot
+  # express: `ceph config` retains public_network and cluster_network after
+  # they disappear from here, and an OSD that comes up on the pod network with
+  # a stale public_network crash-loops on "Failed to pick public address".
+  # Clear them with `ceph config rm global public_network` (and cluster_network)
+  # before the rollout. A cluster built from scratch starts with an empty
+  # config database and never sees this.
  network:
    provider: multus
    selectors:
      cluster: rook-ceph/ceph-san
-  # Nodes are listed explicitly rather than useAllNodes, so that a node can be
-  # taken out of the storage fleet by removing it here. Under useAllNodes the
-  # operator re-provisions an OSD on any node whose device still carries a
-  # BlueStore signature, which makes purging an OSD ahead of pulling its drive
-  # impossible: the OSD is recreated within a reconcile and starts backfilling
-  # onto the drive being replaced.
+  # Nodes listed explicitly, not useAllNodes: under useAllNodes the operator
+  # re-provisions an OSD on any node whose device still carries a BlueStore
+  # signature, so purging an OSD before pulling its drive is impossible — it
+  # comes back within a reconcile and backfills onto the drive being replaced.
  #
-  # All three nodes are bare metal and see three NVMe drives each, so they name
-  # their OSDs by /dev/disk/by-id path. A bare name would be actively wrong:
-  # Talos enumerates these machines' drives in a different order than Proxmox
-  # did, and the kernel name lands on the Kingston SYSTEM disk or on EPHEMERAL
-  # depending on the boot. Rook would probably decline the system disk for
-  # carrying partitions, but that is luck rather than intent. The by-id path is
-  # derived from model and serial and does not depend on enumeration at all.
-  #
-  # k8s-3 demonstrated why: it enumerated the Kingston as nvme0n1 on one boot
-  # and the Crucial as nvme0n1 on the very next one.
-  #
-  #   k8s-1 (jupiter)
-  #   50026B7382B48B86  Kingston  — Talos system disk
-  #   2332E86B749A      Crucial   — Talos EPHEMERAL (/var)
-  #   S437NX0M400426    PM983     — this OSD
-  #
-  #   k8s-2 (saturn)
-  #   50026B7382DA5F6E  Kingston  — Talos system disk
-  #   2332E86B74BC      Crucial   — Talos EPHEMERAL (/var)
-  #   S437NX0M403161    PM983     — this OSD
-  #
-  #   k8s-3 (neptune)
-  #   50026B7382B48B90  Kingston  — Talos system disk
-  #   2326E6E8E67D      Crucial   — Talos EPHEMERAL (/var)
-  #   S437NF0M501176    PM983     — this OSD
+  # Devices are named by /dev/disk/by-id path. Kernel names are not stable
+  # across boots on these machines — k8s-3 enumerated a different drive as
+  # nvme0n1 on two consecutive boots — and a bare name can land on the system
+  # disk or on EPHEMERAL.
  storage:
-    # One OSD restarted at a time. The default is 20, which on a three-OSD
-    # cluster means all of them at once — every PG inactive, every pool
-    # unreachable, for as long as the restart takes. The default suits a
-    # cluster large enough that 20 OSDs is a small fraction of it; here it is
-    # the whole thing.
-    #
-    # This binds any change that rewrites the OSD deployment spec, not just
-    # Ceph version upgrades — a network provider change is one such.
+    # One at a time. The default of 20 would restart every OSD in this cluster
+    # simultaneously — every PG inactive until they return. Binds any change
+    # that rewrites the OSD deployment spec, not just version upgrades.
    osdMaxUpdatesInParallel: 1
    useAllNodes: false
    useAllDevices: false
@@ -273,18 +132,12 @@ spec:
          - fullpath: /dev/disk/by-id/nvme-SAMSUNG_MZQLB960HAJR-00007_S437NF0M501176
    config:
      osdsPerDevice: "1"
-  # Storage layer must never be evicted by kubelet under node pressure
-  # and must never be picked first by the Linux OOM killer. system-node-
-  # critical (PriorityValue 2000001000) is the highest built-in class:
-  # kubelet preserves these pods last, and kernel sets oom_score_adj to
-  # -997 so anything else dies before a Ceph daemon does.
+  # Highest built-in class: kubelet evicts these last and the kernel gives
+  # them the lowest oom_score_adj.
  priorityClassNames:
    all: system-node-critical
-  # memory requests == limits => Guaranteed QoS. Combined with the
-  # priority class above, the pod's oom_score_adj is the lowest possible.
-  # CPU limits are deliberately NOT set — Ceph daemons benefit from
-  # bursting under recovery/backfill, and a CPU limit would throttle
-  # them; CPU pressure on this cluster is not a real concern (~15%).
+  # requests == limits gives Guaranteed QoS. CPU limits are deliberately NOT
+  # set — Ceph daemons burst during recovery and a limit would throttle them.
  resources:
    mon:
      requests:
@@ -1,22 +1,7 @@
 ---
-# The Ceph cluster network as a Multus attachment, so OSDs reach VLAN 49
-# without every Ceph daemon being put on host networking to get there.
-#
-# WHAT THIS REPLACES, AND WHY
-#
-# `addressRanges` only takes effect under `provider: host` — Rook ignores it
-# for the default CNI provider. So carrying replication over the dedicated
-# 10G link meant setting provider: host, which is not per-daemon: it puts
-# mons on host networking too. A mon's address is then the node's DHCP lease,
-# and when that lease moves the mon cannot bind and fails. Worse, three mons
-# on three nodes each hold the mon host ports, so Rook cannot schedule a
-# replacement anywhere and the failover it starts cannot finish.
-#
-# None of that has anything to do with the goal. Per the Ceph documentation
-# the cluster network carries OSD heartbeat, replication and recovery only —
-# "Ceph Monitors always operate on the public network". Attaching it here
-# gives the OSDs the link and leaves everything else on the pod network,
-# where Rook manages identity itself.
+# The Ceph cluster network as a Multus attachment, so the OSDs reach VLAN 49
+# without every Ceph daemon landing on host networking to get there. The
+# alternative and why it was rejected is in cephcluster.yaml.
 #
 # ISOLATION
 #
@@ -29,20 +14,22 @@
 #   needed — unlike the v30iot attachments, there is no DHCP-supplied default
 #   route to confine, because there is no DHCP and no default route.
 #
-#   The pool stays inside 10.99.0.0/29, on-link with the node addresses, and
-#   this is load-bearing during the migration rather than a detail. OSDs move
-#   one at a time, so the cluster runs mixed for a while: an OSD already on
-#   this attachment has to reach an OSD still using the node's host address.
-#   There is no router on this segment, so anything outside the /29 would be
-#   unreachable from the un-migrated side and the two would mark each other
-#   down — during precisely the window that is supposed to be safe.
+#   The pool is the whole usable /29, .1 through .6. It was .4-.6 while the
+#   migration ran, because the nodes still held .1-.3 for as long as Ceph
+#   needed host networking to reach this link — three addresses for three
+#   OSDs, no spare. The nodes have since given those up (the link is only a
+#   macvlan parent now and needs no address of its own), so the reservation
+#   has nothing left to avoid.
 #
-#   range_start/range_end reserve .4-.6 and leave .1-.3 to the nodes. That is
-#   exactly one address per OSD with nothing spare, which is sufficient
-#   because osdMaxUpdatesInParallel bounds the migration to one OSD at a
-#   time: allocations grow 1, 2, 3 and never overlap. Once the switch is
-#   confirmed and the node addresses come out of the Talos configs, the pool
-#   can take the whole /29 and the spare returns.
+#   Keeping the pool inside the /29 rather than moving it elsewhere on the
+#   segment is not cosmetic. There is no router here, so an address outside
+#   the /29 would be unreachable from anything still using one inside it —
+#   which is exactly what would break a future rolling change, where migrated
+#   and un-migrated OSDs have to keep talking to each other.
+#
+#   Six addresses for three OSDs is the headroom the migration could not
+#   afford: room for a leaked allocation to sit until the reconciler collects
+#   it, and room to add a second OSD per node without touching this file.
 #
 # IPAM
 #
@@ -76,7 +63,7 @@ spec:
      "ipam": {
        "type": "whereabouts",
        "range": "10.99.0.0/29",
-        "range_start": "10.99.0.4",
+        "range_start": "10.99.0.1",
        "range_end": "10.99.0.6"
      }
    }
@@ -7,11 +7,8 @@ spec:
  interval: 24h
  url: https://traefik.github.io/charts
 ---
-# Traefik runs alongside ingress-nginx during the migration off the
-# archived kubernetes/ingress-nginx project. Shares the `ingress` namespace
-# so the post-migration topology is just "ingress namespace, one controller".
-# Pilots: shelly-manager.home.renner.uno. ingress-nginx remains the default
-# IngressClass; this controller is opt-in via `ingressClassName: traefik`.
+# The cluster's only ingress controller, and the only IngressClass. It
+# replaced ingress-nginx, which was retired after that project was archived.
 apiVersion: helm.toolkit.fluxcd.io/v2
 kind: HelmRelease
 metadata:
@@ -44,27 +41,18 @@ spec:
  values:
    deployment:
      replicas: 2
-    # Entrypoint-default Middlewares for websecure: baseline security
-    # response headers (HSTS/CSP/X-Frame-Options/etc.) and a generous
-    # abuse/brute-force rate limit, both applied to every router on this
-    # entrypoint without per-Ingress annotations. See
-    # security-headers-middleware.yaml / rate-limit-middleware.yaml for the
-    # actual settings and rationale. This is the same entrypoint-default
-    # wiring mechanism the (currently detached) crowdsec-bouncer Middleware
-    # documents re-enabling via — independent of that CrowdSec enforcement
-    # decision, which stays off pending the client-IP-visibility fix
-    # referenced below.
+    # Entrypoint-default Middlewares for websecure: security response headers
+    # and a rate limit, applied to every router on this entrypoint without
+    # per-Ingress annotations. Settings live in
+    # security-headers-middleware.yaml and rate-limit-middleware.yaml.
    additionalArguments:
      - --entryPoints.websecure.http.middlewares=ingress-security-headers@kubernetescrd,ingress-rate-limit@kubernetescrd
-    # CrowdSec bouncer plugin (Yaegi), loaded but NOT globally attached.
-    # Enforcement was disabled after it caused an IPv6 ingress outage on
-    # first deploy: Traefik sees a single shared/SNAT'd source IP for v6
-    # ingress (no real per-client IP), so one http-admin-interface-probing
-    # hit (the e2e scan) banned that shared IP and 403'd all v6 clients.
-    # Re-attach the bouncer (additionalArguments entrypoint middleware ->
-    # ingress-crowdsec-bouncer@kubernetescrd) only after fixing client-IP
-    # visibility (forwardedHeaders/trustedIPs or the v6 masquerade) and
-    # adding an internal/LAN whitelist. The plugin + crowdsec-middleware.yaml
+    # CrowdSec bouncer plugin (Yaegi), loaded but deliberately NOT attached.
+    # Traefik sees one shared SNAT'd source for IPv6 ingress, so a single
+    # probe banned that address and 403'd every v6 client. Do not re-attach
+    # it until client-IP visibility is fixed (forwardedHeaders/trustedIPs or
+    # the v6 masquerade) and a LAN whitelist exists.
+    # The plugin + crowdsec-middleware.yaml
    # stay in place so re-enabling is a one-line change. Detection (the
    # crowdsec agents parsing Traefik logs) remains on and is unaffected.
    experimental:
@@ -5,45 +5,26 @@ machine:
    - k8s-3.srv.renner.uno
    - k8s.renner.uno
    - 10.2.40.60
-  # Install from the Image Factory metal installer, not the stock
-  # ghcr.io/siderolabs/installer that `talosctl gen config` defaults to.
-  # Extensions live in the installer image, so with the stock one the schematic
-  # is only ever a property of the boot media and nothing lands on disk —
-  # `talosctl get extensions` returns empty on a node installed that way.
+  # Image Factory metal installer, NOT the stock ghcr.io/siderolabs/installer
+  # that `talosctl gen config` defaults to. Extensions live in the installer
+  # image; install with the stock one and nothing lands on disk —
+  # `talosctl get extensions` comes back empty.
  #
-  # What the schematic carries, and why each matters here:
+  # The schematic carries intel-ucode, thunderbolt and i915, and sets
+  # net.ifnames=1, which is what the per-node VLAN parents match against.
+  # Changing which extensions are present means a new schematic hash and a
+  # reinstall or upgrade, not an edit here.
  #
-  #   siderolabs/intel-ucode   CPU microcode. On a VM the hypervisor supplied
-  #                            it; on bare metal nothing does except the BIOS.
-  #   siderolabs/thunderbolt   Inert until machine.kernel.modules asks for
-  #                            thunderbolt/thunderbolt_net. Present so enabling
-  #                            the MS-01 mesh later needs neither a new image
-  #                            nor a reinstall — which is exactly the property
-  #                            lost by installing without it.
-  #   siderolabs/i915          Intel GPU microcode and kernel modules for the
-  #                            Alder Lake-P Iris Xe in the MS-01. No workload
-  #                            requests /dev/dri today; it is here for the same
-  #                            reason as thunderbolt, so that wanting hardware
-  #                            transcoding later is a config change rather than
-  #                            another rolling upgrade of every node.
+  # Read only at install and upgrade time — editing this does nothing to a
+  # running node. The tag must match the version being upgraded to, or the
+  # upgrade is a downgrade. Talos only tests migration between adjacent minor
+  # releases: take the latest patch of each intermediate minor rather than
+  # skipping one.
  #
-  # Not included, and why, so the absences are not mistaken for oversights:
-  # the X710 (i40e) and I226 (igc) NICs need no firmware extension —
-  # intel-ice-firmware covers E810/ice only. mei is a prerequisite for Intel
-  # Arc discrete GPUs, of which there are none. iscsi-tools, nvme-cli and
-  # util-linux-tools have no consumer: storage is Ceph RBD, and device health
-  # is reported by Ceph itself rather than a node-level exporter.
-  #
-  # 0f6fb8bd… is the bare-metal schematic: same net.ifnames=1 as the Proxmox
-  # one (the predictable interface names the per-node VLAN parents match
-  # against), minus qemu-guest-agent. It supersedes a21cec8f…, which was
-  # identical but without i915 — see RUNBOOK-cold-rebuild.md.
-  #
-  # Only read at install and upgrade time. Changing it here does nothing to a
-  # running node until that node is upgraded. Bump the tag with the Talos
-  # version — it must match the running version, or the upgrade is a downgrade.
+  # The Kubernetes version is a separate decision, moved by
+  # `talosctl upgrade-k8s`.
  install:
-    image: factory.talos.dev/metal-installer/0f6fb8bd8bb53013e9743b7c7b099d96fb9c32fd2464ced32693c2dc0ea5feb9:v1.12.11
+    image: factory.talos.dev/metal-installer/0f6fb8bd8bb53013e9743b7c7b099d96fb9c32fd2464ced32693c2dc0ea5feb9:v1.13.9
  features:
    rbac: true
    stableHostname: true
@@ -65,20 +46,13 @@ machine:
    nodeIP:
      validSubnets:
        - 10.2.40.0/24
-    # Lower the image GC thresholds from the kubelet defaults (85/80) to
-    # bound containerd's image cache, which is the largest single consumer
-    # of /var. Spegel P2P pull-through softens the re-pull cost when GC'd
-    # images are needed back.
+    # Lower than the kubelet defaults (85/80) to bound containerd's image
+    # cache, the largest single consumer of /var.
    #
-    # These thresholds do NOT control whether Ceph's mon reports
-    # MON_DISK_LOW, and must not be tuned for that. Measured on k8s-2:
-    # image GC frees only the content store (~8.6 GB), while the bulk of
-    # /var/lib/containerd is ~20 GB of overlayfs snapshots — unpacked
-    # layers shared with running containers, which GC cannot reclaim.
-    # Dropping high to 60 deleted 28 images and moved free space by 0.02
-    # percentage points. The mon's own data is ~106 MB; its 30%-free
-    # warning is measuring a filesystem it merely shares, so the lever for
-    # it is elsewhere (mon volume, /var size, or mon_data_avail_warn).
+    # Do NOT tune these to clear Ceph's MON_DISK_LOW. Image GC reclaims only
+    # the content store; the bulk of /var/lib/containerd is overlayfs
+    # snapshots shared with running containers, which GC cannot touch. The
+    # lever for the mon warning is elsewhere.
    extraConfig:
      imageGCHighThresholdPercent: 70
      imageGCLowThresholdPercent: 60
@@ -1,32 +1,25 @@
-# k8s-1 runs Talos directly on jupiter's MS-01 hardware; k8s-2 and k8s-3 are
-# still Proxmox VMs. Every machine-specific selector below differs from theirs
-# for that reason: there are no virtio NICs, no PCI-passthrough layer, and all
-# four physical NICs and all three NVMe drives are visible to Talos at once.
-#
-# Networking uses the v1.12 multi-document config rather than the deprecated
-# machine.network.interfaces. That is deliberate: the docs do not define what
-# happens when the same link is configured by both schemas, so this file keeps
-# every link in one schema instead of straddling them.
+# Networking uses the multi-document config, not the deprecated
+# machine.network.interfaces. Keep every link in one schema: the docs do not
+# define what happens when both configure the same link.
 machine:
  network:
    hostname: k8s-1
  sysctls:
-    # ens19 (VLAN 30, v30iot) is LINK ONLY — no host addressing. It exists as
-    # the macvlan parent for the v30iot pod attachments
-    # (matter/otbr/shelly-manager/music-assistant), whose children do their own
-    # DHCP on that L2. Host addresses were never needed and are actively
-    # harmful: a connected 10.2.30.0/24 route makes node replies to IoT-subnet
-    # clients bypass the UDM, which breaks every UDM-DNATed flow (hairpin NAT:
-    # un-translated SYN-ACK -> client kernel RST, verified live 2026-07-23).
-    # This disables v6 entirely on that link, including link-local.
+    # ens19 (VLAN 30, v30iot) is LINK ONLY — it is the macvlan parent for the
+    # v30iot pod attachments and must never get host addressing. A connected
+    # 10.2.30.0/24 route makes node replies bypass the UDM and breaks every
+    # DNATed flow.
    net.ipv6.conf.ens19.disable_ipv6: "1"
+    # These two sit on the untagged fallback network, where nothing may run.
+    # Left enabled they autoconfigure a ULA and an IPv6 default route from its
+    # RAs, which ties with mgmt0's and costs the cluster IPv6 egress.
+    # Disabling v6 on a VLAN parent does not affect the VLAN child.
+    net.ipv6.conf.enp2s0f0np0.disable_ipv6: "1"
+    net.ipv6.conf.enp87s0.disable_ipv6: "1"
  install:
-    # Three NVMe drives are ordinary block devices to Talos here: the Kingston
-    # OM8PGP41024Q-A0 system disk, the Samsung PM983 that Rook claims as the
-    # Ceph OSD, and the retired Crucial P3 that carries EPHEMERAL (see the
-    # VolumeConfig below). Every one of them is selected by serial. Nothing in
-    # this file may use a broad selector: `disk.transport == 'nvme'` matches all
-    # three, and the failure mode is Talos taking the OSD drive.
+    # Select disks by serial only. A broad selector such as
+    # `disk.transport == 'nvme'` matches every drive in the machine, and the
+    # failure mode is the installer taking the Ceph OSD drive.
    diskSelector:
      serial: 50026B7382B48B86
  certSANs:
@@ -36,15 +29,10 @@ machine:
 cluster:
  allowSchedulingOnControlPlanes: true
 ---
-# EPHEMERAL (/var) goes on the retired Crucial P3, not the system disk.
-#
-# That drive is at 87% of its rated endurance and was this node's Ceph OSD until
-# the PM983 replaced it. /var is exactly the right role for a disk in that
-# state: containerd's image and snapshot store, pod logs and the Ceph mon store
-# are all reconstructible, so the drive is consumable here in a way it is not as
-# an OSD. It also gives /var ~931 GB instead of the 64 GB the VM-era zvol had,
-# which is the constraint that makes k8s-2 and k8s-3 trip DiskPressure whenever
-# they absorb another node's pods.
+# EPHEMERAL (/var) goes on the retired Ceph OSD drive, deliberately: its
+# contents are reconstructible, so a worn disk is consumable here in a way it
+# is not as an OSD. Note /var/lib/etcd lives here too, which is the one thing
+# on the volume that is not free to lose.
 #
 # THIS ONLY TAKES EFFECT ON FIRST PROVISION. Talos applies volume configuration
 # solely when the volume does not yet exist; a config applied after EPHEMERAL
@@ -52,8 +40,8 @@ cluster:
 # requires wiping the disk and booting install media again.
 #
 # Matched by serial deliberately. `disk.transport == 'nvme' && !system_disk`
-# would match the PM983 as well, and losing that coin flip means Talos formats
-# the OSD drive.
+# still matches the OSD drive, and losing that coin flip means Talos formats
+# it.
 apiVersion: v1alpha1
 kind: VolumeConfig
 name: EPHEMERAL
@@ -63,30 +51,25 @@ provisioning:
  minSize: 50GiB
  grow: true
 ---
-# X710 port 0 carries the switch trunk. It takes no addressing itself — the
-# port's untagged VLAN is the 192.168.8.0/24 network, which this node has no
-# business being on — so management and v30iot both ride it as tagged VLANs.
+# X710 port 0 carries the switch trunk and takes no addressing itself — its
+# untagged VLAN is a network this node has no business being on. Management
+# and v30iot ride it as tagged VLANs.
 #
-# Links are addressed by predictable kernel name. Those derive from PCI
-# topology, not probe order — though not immune: adding the third NVMe
-# renumbered the buses and moved the unused second I226 from enp89s0 to
-# enp90s0. Neither name used here was affected.
+# Links are named by predictable kernel name, which derives from PCI topology
+# and can still shift when hardware is added.
 #
-# LinkAliasConfig would be the better way to pin these, and is worth
-# reintroducing — but only once it is proven. Aliasing both X710 ports by
-# permanent MAC and using the aliases as VLAN parents produced a node with no
-# address on any interface: the aliases were never created, so every document
-# referencing them did nothing, including the static address on port 1. Verify
-# any alias-based revision with `talosctl apply-config --mode=try`, which rolls
-# back on its own, before making it permanent.
+# LinkAliasConfig would pin these better, but aliasing the X710 ports by MAC
+# and using the aliases as VLAN parents left the node with no address on any
+# interface — the aliases were never created and every document referencing
+# them silently did nothing. Prove any alias-based revision with
+# `talosctl apply-config --mode=try` first; it rolls back on its own.
 apiVersion: v1alpha1
 kind: LinkConfig
 name: enp2s0f0np0
 up: true
 ---
 # Management, VLAN 40. Carries the node IP, etcd, the API and Ceph's public
-# network. The k8s-1 VM reached 10.2.40.174 over this same physical port via
-# Proxmox's v40srv VNet (vmbr0.40), so the switch trunks VLAN 40 here.
+# network.
 apiVersion: v1alpha1
 kind: VLANConfig
 name: mgmt0
@@ -94,6 +77,15 @@ vlanID: 40
 parent: enp2s0f0np0
 up: true
 ---
+# DHCP, and the lease is not reserved in this repo — reservations live on the
+# UDM out of band. Addresses do move under a running node.
+#
+# kube-apiserver does not follow a re-IP: it advertises $(POD_IP) fixed at pod
+# start and the lease reconciler keeps renewing the masterlease under the old
+# address, so `default/kubernetes` hands out a dead endpoint until the static
+# pod restarts (#635). After any node re-IPs, check that
+# `kubectl get endpoints kubernetes -n default` agrees with
+# `kubectl get nodes -o wide` and reboot the node if it does not.
 apiVersion: v1alpha1
 kind: DHCPv4Config
 name: mgmt0
@@ -105,10 +97,8 @@ kind: Layer2VIPConfig
 name: 10.2.40.60
 link: mgmt0
 ---
-# Named ens19 on purpose. The four v30iot macvlan NADs hard-code
-# `master: ens19`, and k8s-2/k8s-3 still present the VLAN as a virtio NIC of
-# that name. VLANConfig.name is free-form, so keeping it lets one set of NADs
-# serve both VM and bare-metal nodes for as long as the cluster is mixed.
+# Named ens19 on purpose: the v30iot macvlan NADs hard-code `master: ens19`.
+# VLANConfig.name is free-form, so renaming this link means editing them too.
 apiVersion: v1alpha1
 kind: VLANConfig
 name: ens19
@@ -116,19 +106,13 @@ vlanID: 30
 parent: enp2s0f0np0
 up: true
 ---
-# Dedicated Ceph cluster network on X710 port 1, VLAN 49 / 10.99.0.0/29,
-# untagged on the wire. Carries OSD<->OSD replication and nothing else.
+# Dedicated Ceph cluster network on X710 port 1, VLAN 49, untagged on the
+# wire. OSD-to-OSD replication and nothing else.
 #
-# The node deliberately holds NO address here. Rook attaches this link to the
-# OSD pods through a Multus macvlan (infrastructure/rook-ceph-cluster/
-# san-network-attachment.yaml), and a macvlan parent only has to be up — it
-# does not need an address of its own for its children to work.
-#
-# It used to carry 10.99.0.1/29, because reaching this link required
-# CephCluster.spec.network.provider: host, and that put every Ceph daemon on
-# host networking, mons included. Nothing needs it now, and by the rule this
-# segment is built on — Ceph-internal traffic and nothing else — the node has
-# no business on it either.
+# The node holds NO address here on purpose. Rook attaches the link to the OSD
+# pods through a Multus macvlan, and a macvlan parent only needs to be up.
+# Giving the node an address would put it on a segment reserved for
+# Ceph-internal traffic.
 apiVersion: v1alpha1
 kind: LinkConfig
 name: enp2s0f1np1
--- a/Show More
+++ b/Show More